Plant abroad - when use tax indicator? Two reporting countries one invoice
Hi!
My customers has its head office (company code) in Sweden. It has plants abroad and we have activated this function. Now the sellers in Sweden have been on business trip in both Sweden and in Australia (where we have plant abroad). They have used their master card and now the invoice from the bank has arrived and my customer wonders what tax indicators should be used when posting the invoice (with travel costs both in Sweden and Australia). My questions are:
-Should we use only swedish tax indicators (rep. country Sweden) on all costs on the invoice, both from Sweden and from Australia? Or should I use different tax indicators, since the customer is VAT registered in both countries?
-Does plant abroad only regards shipping material to and from the plant in Australia? Or can other costs that appears when having travelling costs within the country also be reprted with Australian tax indicators (reporting country Australia)? If it it so, how can I post an invoice with tax indicators with different reporting countries in one transaction in fb60?
Thank you very much in advance!
Best Regards, Åsa
Hello,
Could you please tell me the solution for the same as I am having some similar situation.
Thanks.
Similar Messages
-
Run two report in one Excel sheet1 and sheet2
Hi all;
I want to have my one report in sheet1 and another one in sheet2 when I opened my excel sheet. How can I perform this two report in one excel sheet. I can copy the report and paste but then there would be no drill down or other functionality.
thank. you.Hi Krishma,
You can save this workbook to your PC and email it to your user. They need to open the workbook (with Bex running in Excel). When they click the refresh button they system will prompt them to log on (if they are already not logged in) and then the queries will be executed.
Hope this helps... -
hi Expert,
how to display two report in one please help me .
Regards,
HamadHi,
Refer the sample code:
CLEAR w_event.
w_event-name = slis_ev_top_of_page.
w_event-form = 'TOP_OF_PAGE'.
APPEND w_event TO i_events1.
CLEAR w_event.
w_event-name = slis_ev_top_of_page.
w_event-form = 'XTOP_OF_PAGE'.
APPEND w_event TO i_events2.
DATA: lv_repid LIKE sy-repid.
lv_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = lv_repid
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'PF_STATUS'.
*-- Vendor Schedule List
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
it_fieldcat = i_field_cat1
is_layout = w_lay_out1
i_tabname = '<I_TABLE>'
it_events = i_events1
TABLES
t_outtab =<b> <i_table>.</b> Data for Report 1
*-- Error Lsit display
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
it_fieldcat = i_field_cat2
is_layout = w_lay_out2
i_tabname ='I_ERROR'
it_events = i_events2
TABLES
t_outtab = <b>i_error[].</b> - Data for report 2
w_print-reserve_lines = 2.
w_print-no_print_listinfos = c_x.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
is_print = w_print.
ENDFORM. " f0504_create_list
*-- Top of Page
FORM top_of_page.
WRITE: sy-title.
ENDFORM.
FORM xtop_of_page *
FORM xtop_of_page.
WRITE: 'Error Records'.
ENDFORM.
Reward points if this Helps.
Manish -
Query Stripping not working properly when using variable in the report
We have issue with WEBI document that have query stripping enable.
Once the query stripping enabled there is no data return in the report.
We have investigate on the problem, the query stripping function are notable to retrieve objects that indirectly used in the report
as we have
many variable in the reports.
Ex.
Var1 = object1 + object2
Var2 = Object3 + Object4
Var3 = Var1 + Var2
Var4 = Object1 + Object2 + Object3 + Object4
If we use only Var3 in the report, the object1,2,3,and 4 will not be
retrieve.
But if we are using Var4 in the report, the object1,2,3,and 4 will be
retrieve properly.
Please let me know is it a by-design behavior, if yes please share points on itHi Amit,
Thank you for response, however i already had alook on that VIdeo and it tells us about the basic enabling of query stripping.
But my question is when we have a Variable in a report which is dependent on the other two variables it gives me #error so is it by design or not.
Regards,
Abhinav -
Hi,
I have region and I want to add two reports to this region, every report has diffrent query
can I do this in Apex ??
Thanks for all.
Best Regards.
Mohd.This can be done in several different ways:
1. the way it was done in my demo application
2. modifying region templates and making the regions to appear beside / below each other in order to look as one
3. using HTP.p to create your own region / reports manually.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------ -
Joining Two Reports in one Detail Section
Post Author: NewITGuy
CA Forum: Crystal Reports
Hello I am working with Crystal Reports XI, I have two reports that I want to see it I could join together on one report. The closest example I can give is :
Customer Order table is Linked to Purchase order Table- This report shows all items on order for the customer with expected delivery. These are two tables.
Then
Customer Quote table- This report just shows all quotes for items to be purchased in the future.This is one table.
I would like to join these two reports to show our customers what is on order along with what is currently being quoted.
Thanks in advance for your help!!Hi,
Assuming you want to have two, or more, reports that look like a single report, then see: Re: Questions about reports
Andy -
Using iPhone in two different countries
As a Mac user I am keen to buy an iPhone but haven't done so because of Apple's strange marketing strategy. I travel regularly between two European countries and I have a SIM card for each country--primarily to take advantage of local data costs rather than telephone costs. I always buy an unlocked phone and simply swop the SIM cards at the airport. Apple appear not to have thought about this possibility and their insistence on not allowing official unlocking will be a big negative for many Europeans, particularly businessmen who travel a lot. I simply cannot justify buying a phone that can be used in only one country at local call rates. I wouldn't particularly care what an unlocked phone cost--within reason, of course--provided I could decide on what contract and where. I understand there are already anti-competitive issues in Germany and also in France where I have read that it is illegal to sell locked phones.
Does anyone know what would happen if I bought an unlocked iPhone in France or Germany and then used it with SIM cards from Britain and Greece? Would Apple still clobber me with the system upgrades or would I have special privileges as a German/French customer?
In general terms, the whole marketing strategy looks to me like a restrictive practice and I believe most European countries will eventually force a change. Maybe that will coincide with the introduction of 3G capabilities (another essential for Europe, in my opinion).
All this has probably been said before, but I thought I'd add my penn'orth in case anyone from Apple is monitoring the forum.One comment on the SIM card swapping, I read on one of the discussions that the tray holding the SIM card is not that robust. There may be a risk with a lot of SIM card swaps that the tray breaks and then you'd be at the mercy of Apple re whether you voided their support agreement or not.
-
Two deliveries in one invoice.
Dear ALL,
we have a requirement where we want to bill two delivery documents in one Invoice. both the deliveries have same shiping point,ship tp party etc.
When we go to VF04 with delivery related as ticked and execute we can see both the deliveries,but when we select both and click on collective billing doc/online invoice we can see both the values of the invoices,but the system is creating as two invoice numbers and not one.
We require both the values to be created as one invoice with the summation of both values so that we just take one print of the invoice and send it to the customer instead of sending two invoices as the staionary is also reduced.
please suggest if something is missing or the steps involved.
Thanks
AJHi
Please go through the below thread
Re: Single invoice for different PO
Split analysis :
Go to VF02 enter the billing document no and press SHIFT+F12 and enter the other billing documnet no and system will show the difference between both of the billing documnets
Kindly check the below points also
1.incoterms & incoterms description
2.payment terms
3.P.O number in the sales order
4.Item division for the material (if maintained the routine invoice split -001 in VTFL)
Regards
Damodhar -
We have and issue with the confirmation (limit order), two confirmation has been created for one invoice.
first one that has been create portal which Error " Error in process".
Secound one is created in the backend system through ML81n.
GRN has not gone through to the system.
I am thinking to delete the confirmation, i am not getting a delete button in confirm goods reciept.
Could you please suggest how to get the delete button, is there any role or profile is needed to view this buttons.
Please reply me ASAP.See if you can delete the item, that in turn will take care of the actual one.
Regards, IA -
Error message when using counter indicating need to use faster timebase
I'm attempting to use the two onboard counter timers on my DaqPad 6015 with a SC2345 carrier.
The program initially runs as expected, but once in a while I get an error message that reads as follows:
"2 consecutive active edges of the input signal occured without a counter timebase edge."
"Use a faster counter timebase"
I have only attempted to read this signal at two known frequencies: 15 and 20 Hz.
Can anyone advise as how to correct this or how to change the counter timebase?
I'm using the built in Express Daq Assistant to create the code to read the frequency so that part is pretty straight forward.
This command is however inside of a case structure, so each time it reads it is possible to reset or miss the first leading edge of the signal.
Thanks,
PatrickHi Patrick,
It sounds like the program is lagging when you attempt to read the gate of this counter. 15 Hz seems slow in comparison to the specs of the counter, but if your VI is slow by 7/100th of a second the program will thrown an error. I recommend probing the counters to determine where in the program the error occurs.
Michael K.
| Michael K | Project Manager | LabVIEW R&D | National Instruments | -
Error when useing DBMS_CRYPTO package in reports 10g
hi all,
i wrote a package which use dbms_crypto, there are functions to crypto userid and decrypo userid.
in report 6i it work fine it cryptos and decrpts. when i use in reports 10g it gives this error.
-28817 ORA-28817: PL/SQL function returned an error.
ora-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 41
ora-06512: at "YBS.SIFRELE", line 26
the packege like this;
PACKAGE BODY SIFRELE
IS
function sicil_sifrele (p_sicil_no IN varchar2) RETURN varchar2
IS
p_key RAW(128);
p_sicil_raw RAW(128);
p_encrypted_raw RAW(128);
BEGIN
p_key := utl_raw.cast_to_raw(to_char(sysdate,'mmyyyydd'));
p_sicil_raw := utl_raw.cast_to_raw(p_sicil_no);
p_encrypted_raw := dbms_crypto.encrypt(src => p_sicil_raw,
typ => dbms_crypto.des_cbc_pkcs5, key => p_key);
return (utl_raw.cast_to_varchar2(p_encrypted_raw));
END;
FUNCTION sicil_coz ( p_encrypted_raw IN RAW) RETURN varchar2
IS
p_key RAW(128);
p_decrypted_raw RAW(128);
sicil_donen VARCHAR2(250);
BEGIN
p_key := utl_raw.cast_to_raw(to_char(sysdate,'mmyyyydd'));
p_decrypted_raw := dbms_crypto.decrypt(src => p_encrypted_raw,
typ => dbms_crypto.des_cbc_pkcs5, key => p_key);
sicil_donen := utl_raw.cast_to_varchar2(p_decrypted_raw);
return (sicil_donen);
END;
END;
thanks.
eserHello,
You should create a "wrapper function"
Create a function in the database that will call dbms_crypto.encrypt / dbms_crypto.decrypt and call this function in Reports.
(The problem here seems to be the reference to dbms_crypto.des_cbc_pkcs5)
Regards -
Error when using DBMS_CRYPTO package in reports 10g
hi all,
i wrote a package which use dbms_crypto, there are functions to crypto userid and decrypo userid.
the packege like this;
PACKAGE BODY SIFRELE
IS
function sicil_sifrele (p_sicil_no IN varchar2) RETURN varchar2
IS
p_key RAW(128);
p_sicil_raw RAW(128);
p_encrypted_raw RAW(128);
BEGIN
p_key := utl_raw.cast_to_raw(to_char(sysdate,'mmyyyydd'));
p_sicil_raw := utl_raw.cast_to_raw(p_sicil_no);
p_encrypted_raw := dbms_crypto.encrypt(src => p_sicil_raw,
typ => dbms_crypto.des_cbc_pkcs5, key => p_key);
return (utl_raw.cast_to_varchar2(p_encrypted_raw));
END;
FUNCTION sicil_coz ( p_encrypted_raw IN RAW) RETURN varchar2
IS
p_key RAW(128);
p_decrypted_raw RAW(128);
sicil_donen VARCHAR2(250);
BEGIN
p_key := utl_raw.cast_to_raw(to_char(sysdate,'mmyyyydd'));
p_decrypted_raw := dbms_crypto.decrypt(src => p_encrypted_raw,
typ => dbms_crypto.des_cbc_pkcs5, key => p_key);
sicil_donen := utl_raw.cast_to_varchar2(p_decrypted_raw);
return (sicil_donen);
END;
END;
in report 6i it work fine cryptos and decrpts. when i use in reports 10g it gives this error.
-28817 ORA-28817: PL/SQL function returned an error.
ora-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 41
ora-06512: at "YBS.SIFRELE", line 26
thanks...Hello,
You should create a "wrapper function"
Create a function in the database that will call dbms_crypto.encrypt / dbms_crypto.decrypt and call this function in Reports.
(The problem here seems to be the reference to dbms_crypto.des_cbc_pkcs5)
Regards -
Incorrect indentation when using on-the-flying report generation and IF statement
Reproduce steps:
1. Use teststand version 4.2
2. Turn ON on-the-fying report option.
3. Report option -> INclude Step Results->Result Filtering Expression = Exclude Passed/Done/Skipped
4. My simply code is
For loop
If something
Do something
If somethingmore
Call Action and set Record Result = ON
end if
End IF
End loop
Issue:
The test report generated for "Call Action" indents every new row. Because it is a long test, this make the test report very difficult to read. If there is a very long test, the test report is become unreadable.
Is there a solution for this issue?
ThanksHi Biet,
Unfortunately this is a known issue with TestStand, which is documented in the TestStand 4.2.x Known Issues. This occurs in situations where you are using HTML reports with On-The-Fly Reporting and a Result Filtering Expression. To avoid this situation, you can do one of a few things:
Use a different report format
Turn off On-The-Fly Reporting
Not filter the results
If you must filter results, you can modify the process model slightly to improve the situation. Though this is not a complete workaround, it can help.
First, configue your Report Options so that you are reporting All
Results, rather than filtering. Leave On the Fly reporting ON. Next, we
need to make a modification to your process model. In the process model,
open the ProcessModelPostResultListEntry sequence. In this sequence,
select the Process Step Result step, and select the Properties tab. On
that tab, select the Preconditions category. The text for the
precondition should be the following by default:
!Runstate.Root.Locals.ReportOptions.DisableReportGeneration &&
Runstate.Root.Locals.ReportOptions.UseOnTheFlyReporting
Now, we want to modify this to be as follows:
!Runstate.Root.Locals.ReportOptions.DisableReportGeneration &&
Runstate.Root.Locals.ReportOptions.UseOnTheFlyReporting &&
Parameters.Result.Status != "Passed" &&
Parameters.Result.Status != "Done" &&
Parameters.Result.Status != "Skipped"
This
new precondition essentially implements our own filtering. In the
condition that I have supplied, we will not add entries to the report
where the status is "Passed", "Done", or "Skipped". (You can add
additional lines to add additional statuses to filter.) The limitation
here is that the bug provides incorrect indentation, so the results may still be grouped slightly differently than they would be without the bug.
I hope this helps!
John M
National Instruments
Applications Engineer -
Clean up output when using concat for two columns?
Probably a basic questions, but I searched this forum and google and couldn't find an answer, so here it goes...
I'm trying to concatenate two fields: first_name and last_name
I'm using the following pl/sql:
concat(a.first_name, a.last_name)But it runs the name together
smithjohn And the title shows the following
concat(a.first_name,a.last_name)And this output is going to a non-technical users, so I don't want them to freak out...
I've tried this as well
a.first_name||' '||a.last_nameAnd now the column, I get the following:
Smith John But the column heading shows
a.first_name||""||a.last_nameIs there anyway I can clean up the column heading so the end users won't be confused...?
thanks
Message was edited by:
cmmillerFor renaming the title of the column use an alias with "AS" or just put the alias after the concatenation.
Examples:
denunez@XE> select e.first_name||' '||e.last_name as Name from employees e where rownum <3
2 ;
NAME
Ellen Abel
Sundar Ande
denunez@XE> select e.first_name||' '||e.last_name Name from employees e where rownum <3
2 ;
NAME
Ellen Abel
Sundar Ande
denunez@XE> select e.first_name||' '||e.last_name "Employee Name" from employees e where rownum<3;
Employee Name
Ellen Abel
Sundar Ande -
Poor performance when using bind variable in report
I have a report that takes 1 second to run if i 'hardcode' a particular value into the where clause of the report. However, if i now replace the hardcoded value with a bind variable and set the default value for the bind variable to be the (previous) hard coded value the report now takes 50 seconds to run instead of 1 second!!
Has anyone else seen this behaviour - any suggestions to workaround this will be gratefully receivedMore info
SELECT patch_no, count(*) frequency
FROM users_requests
WHERE patchset IN (SELECT arps2.patchset_name
FROM aru_bugfix_relationships abr, aru_bugfixes ab, aru_status_codes ac,
aru_patchsets arps, aru_patchsets arps2
WHERE arps.patchset_name = '11i.FIN_PF.E'
AND abr.bugfix_id = ab.bugfix_id
AND arps.bugfix_id = ab.bugfix_id
AND abr.relation_type = ac.status_id
AND arps2.bugfix_id = abr.related_bugfix_id
AND abr.relation_type IN (601, 602))
AND included ='Y'
GROUP BY patch_no
order by frequency desc, patch_no
Runs < 1 sec from SQL navigator and from portal (if i hardcode the value for fampack.
Takes ~50 secs if i replace with :fampack and set default value to 11i.FIN_PF.D
Maybe you are looking for
-
Process: iMovie [2331] Path: /Applications/iMovie.app/Contents/MacOS/iMovie Identifier: com.apple.iMovieApp Version: 9.0.7 (1768) Build Info: iMovieApp-1768000000000000~2 App Item ID: 408981434 App External ID
-
HTTP response code 500 : Error during Sender Agreement Determination
I am trying a simple file to file scenario and messages are not being received in Integration Server. Through communication channel monitoring, i have received the below error message. Error Transmitting the message to endpoint http://<hostname>:5000
-
Works in FF and not like its supposed to in IE
Im having trouble with created unordered list. In FF everything works fine but when i preview it in IE links in the list are not in a same row as their assigned circles, squares or whatever i use for bulleting!!! Thnx for help in advance!!!
-
I type from Brazil - like shifting the sql in time of execution
Hi, friend�s like shifting the sql in time of execution inside of the netbeans Thank�s I Type from Brazil and you ?
-
B12 B1 BusinessPartnerGroups ObjectType (10) Problem
Hi created a BizStep to map BusinessPartnerGroup ObjectType 10 (B1.2007_BPG) but I received the following error message: Sender SysId, Sender ObjectType or Sender payload is missing. Checking the xml in B1iSN Admin Console (monitor) i see that I have