Plant in Madeira - tax rate different than mainland Portugal

Our client resides in Portugal. Now they are opening a branch office (plant) in Madeira.
For Madeira other tax codes apply than for mainland Portugal.
Is it possible to define material tax classification per plant ? How can this be done ?
Is there any other idea how to deal with the plant in Madeira ?

Hi,
I am not experienced in Portuguese taxation.
Ii saw the std tax procedure TAXPT. Here access sequence used is MWST. if its possible to change it you can add another sequence before the current with Country/Plant/Tax classification. Then you can get the desired.
regards,
Adwait Bachuwar

Similar Messages

Different Tax rates from same country plant/ sales organization

Hi Gurus,
Here is a scenario I have-
We have 2 plants in Japan, A & B, both are linked to Sales org A & B respectively, material X sold out of Sales Org/ Plant - A for a customer 100 needs to have tax rate of 8% and same material X sold out of Sales Org/ Plant - B for same customer 100 needs to be tax exempt. the problem in this scenario is that tax classification are maintained at country level which means that material tax classification cannot be set at plant/ sales org level, and tax classification for customer is same for both can anyone suggest how can we go about it?
regards
Anmol

Gurus,
I sincerely would like to thank you for taking time out and answering this question, I need your help on one last matter, here's a scenario-
Japan's consumption tax rate has changed to 8% with effect from 1st April 2014 till 31st march the rate was 5%, in this case our system will have 2 condition records-
MWST condition type as 5% with end date as 03/31/2014. This means if
the draft invoice is issued by 03/31/2014 then a 5% tax rate will be applied
and another tax rate of 8% will be applied with start dates 04/01/2014 to
12/31/9999 which includes draft invoices issued post 31st March.
below is business scenario-
Work is finished on March 26th but the draft invoice is issued on April 10th, this draft invoice is
subject to a 5% rather than 8% tax rate.
Can you guys let us know how to achieve this, can we do this throug ha user exit
regards
Anmol

Tax code with more than one tax rate

Hi,
I am using TAXINN procedure and I created on tax codes with more than one rate. i.e. for service tax I created a tax code S1 with 3 rates as follows
Acc. Key    Tax %      condition type
VS9            12             JSE4
VS0              2             JES4
VSS              1             JHS4
When I am trying to post a document with the above tax code the system is giving the following error message
Tax code S1 may only contain one assignment line
Message no. FF731
Diagnosis
For direct postings to tax accounts, only tax codes containing exactly one tax line may be used. Tax codes with several rates or a nondeductible portion are not allowed here.
Procedure
Use a different tax code.
For direct postings to a tax account, you might have to define a separate tax code for which only one line with a percentage rate other than zero is active in percentage rate maintenance. All other lines must be inactive.
To do this, choose Maintain entries (F5).
Could you please let me know how to rectify this problem? I want to post 3 line items for each of base rate, Edu. Cess and Higher Edu.cess.
Advance thanks for your help and
Regards
Koteswara Rao Padarti

The problem is in the master data of the revenue account. the tax category should not be > and it should be *

Two different tax rates in same tax code

hi,
I have a client requirement as follows. A tax code is created for 12.5% cenvat. This tax code is used by one company. Now the same tax code will be used by second company but in some of their transactions they want 5% cenvat and balance 7.5% to be transferred to inventory.
Can such a config be done with same tax code with condition types or something? PLZ help in this issue. FYI the client does not wants a separate tax code to be created as volume of transactions with 5% tax rate is very less.
thanks and reagdrs
Tanuja NAik
FICO consultant

Unfortunately, same tax code can't be used with different rates. In your situation, it's inevitable to create another tax code.

AP invoice with different tax rate and cost center?

Dear all,
We are just upgrade from 11i to R12.1.3. Before in 11i, we can change distribution account in AP invoice distribution line if the type is "Tax". However, after updated to R12, we define tax code (e.g. P1 for particular account combination), so once user selects tax code "P1" and invoice will automatic creates tax line for such invoice but the user cannot change distribution account anymore. Because in 11i, user will change the distribution account (cost center segment) but now in R12 user cannot change it.
The only work around is defining different tax code for different cost center.
For example: P1-0001 => 01.0000.999999.00001
P2-0001 => 01.0000.999999.00002
We have hundred of tax code and cost center combination.
Any other work around for this? or anyone encounter the same problem?
Please advice.
Thanks.

Let me explain more in details:
1) The cost centre will will more. 2 cost centres just a simple example.
For now, we have 5 cost centres for each of the tax rate. For the work around now, I need to define 5 tax codes for the same tax rate for different distribution combinations:
Quote
Tax Code ==>Tax Rate ==> AP Distribution Combination
A1-3500 ==> 10% ==>001.9999999.3500.00
A1-3600 ==> 10%==> 001.9999999.3600.00
A1-3700 ==> 10%==> 001.9999999.3700.00
A1-3800 ==> 10%==> 001.9999999.3800.00
A1-3900 ==> 10%==> 001.9999999.3900.00
2) The driving factor would be 100% percent.
Please kindly advice.
Many thanks.
driving factor for the cost centre

Extended Withholding Tax Rate change at invoice Level

Hello Every One
We are implementing Extended Witholding TAx in US.
How can i achieve Below
Requirement 1:
At the time of invoice the business want to override the Tax rate, but i am not sure how it will happen since tax rate % is defined in tax codes and tax codes are assigned in the vendor master? The reason for this is that if one vendor has existence in two different countries then our company will with held tax at different rate.
My Solution: I will define one tax code with 100% rate and then if the that vendor has to be deducted at 30% rate. Then in the vendor master in the exemption % field they can put 70%, so at the time of invoice it will be calculated 30%, but the draw back of this is that it has to be maintained by the master data team and the invoice clerk cannot do it right away if the requirement gets changed. (if someone has other than this please let me know)
Requirement 2:
How we can with hold tax at line item level, is it possible?
for example if we receive an invoice from a vendor for 2000$. Out of 2000$ $1200 is belong to service which is taxable and 800$ is belong Material which is not taxable.
Requirement 3.
What will be the configuration setups of with holding tax account in FS03
Best Regards

Refer the sdn thread posted on similar issue
Please search in sdn before posting .
[SDN URL|Set exchange rate indicator in billing;

Excise tax rate problemin MM

HI,
I have two queiries reg. taxtaion
1 If a material is of Domestic Purchase and Import purchase then how to maintain the Excise Tax Rate for that material.
2. During Capturing the excise sometime we are not able to pick the correct Base value, as it should come from Purchase order, also not able to get Tax rate and tax amount, as should be come from J1ID.
Please suggest me how to go abt that.
Regards,
Seenu

Hi,
Which tax procedure are u using
U maintain conditions based on material/vdr/plant combination... For import purchase ur vendor is going to be different. Hence your purchasing will not get affected.
The excise values will be captured while capturing excise invoice which are maintained in FV11 & also the same values come in PO. Check if PO is correct. The base value will be taken from PO. Although we can change the same while capturing excise invopice as per correct excise copy we receive from vendor
Regards,
Sourabh

CIN - J1ID TAX RATE MAINTAINED VALIDITY DATE (INDIAN SCENARIO)

IN INDIA TAX RATES CHANGE DURING EVERY YEARS BUDGET. EXCISE AND CUSTOMS DUTY CHANGE FROM MARCH WHEREAS SALES TAX CHANGES FROM APRIL. THIS TIME DUE TO RECESSION AND ELECTION THE EXCISE DUTY STRUCTURE WAS CHANGED THRICE FROM DEC 2008 TILL DATE. FROM 14 TO 10 AND NOW 8%. IN CIN DATA (J1ID) THE TAX RATES ARE ALSO TO BE MAINTAINED. NOW THE TAX RATE IS STORING DIFFERENT VALIDITY DATES. THIS AFFECTS THE POSTING OF MIRO AND MIGO. WHILE POSTING THE DOCUMENT IT CONSIDERS THE POSTING DATE AND APPLIES THE TAX RATE AS PER THAT DATE. YOU HAVE PENDING DOCUMENTS WHERE THE TAX RATE IS DIFFERENT THAN THE CURRENT DATE. IS THERE A SOLUTION SO THAT TAX RATES ARE CORRECTLY PICKED.
BEST REGARDS
PANKAJ

HI,
The condition type has nothing to do with the consignment settlement.The factor which influence for
consignment settlement thro MRKO is the price u have given in PIR,PB00 & the tax code which u have
entered in the PIR tax code tab.It is no way connected to the vendor master.So if the tax code is
changing for different time period ask them to change manually.
regards
murugan

Define Multiple Taxes with different Accounts

Dear Members
I have defined tax in Oracle R12 . and defined multiple rates. these all tax deducted in a single Tax account. but my requirement is, there should be multiple taxes with different acccounts. when I define multiple taxes the system gives error unable to Calculate the tax. when I only enable one tax it works.
Current sanario tax rates
2% Account # 666461
3% Account # 666461
3.5% Account # 666461
Required Sanario
2% Account # 666461
3% Account # 666462
3.5% Account # 666463
Should be different
Do you have any Idea How I configure it.

Hmmm, thought I did that but ran into issues...Will give it a harder look.
Thank you for your reply, tt2...BTW, I've been reading these forums for awhile now and your replies in other posts have helped me so thanks for all of them, too...

List of tax code with tax rate

I need a list that give the tax code with the tax rate.
I can view this in SAP or witch table i look this.
Moderator: please do not log issues twice and crosspost into different (and wrong) forums. Thread relocated to ERP Financials and locked.

hi
>i wanna see the list of the tax code defined for the Service PO in its "invoice" tab.like for service tax we have three tax :
check T code FTXP
> tax code displayed to which the calculations are applied
check t code OBYZ
regards
kunal

Tax Rate re-determination in purchase Order

Hi,
I have maintain the Tax rate through Transaction FV11 with key combination Plan/ Vendor/ Material Group/ Tax code.
Below Tax rate Structure :
Country
Plant
Vendor
Material Group
Tax Code
Tax Rate
Valid From
Valid To
IN
C006
11691
201
L7
12.36
01.04.2015
20.04.2015
IN
C006
11691
201
L7
14.00
21.04.2015
31.12.9999
I am creating the PO on dated 01st April 2015.When i am change in current pricing date in Pricing Control Tab , Tax rate can not be re determine in purchase order.
please check the screen shot

Hello Sachin,
Tax rate determination in PO is based on the PO document date and not on the price date.
You can test this, during PO creation, first you keep PO document date as '07.04.2015', system will show tax percentage as 12.36. Now, you change the PO document date to '22.04.2015', system will show tax percentage as 14.

Error in tax rate

Hi everyone,
I am facing a problem in tax on sales.For our client there are 2 types of CST tax rate for the customer: 4% and 1%(C Form).Accordingly 2 different tax codes are maintained for it.Now even after maintaining the different tax slabs in the customer master,during sales processing only the CST tax rate of 4 % is coming in the pricing. Its not picking the 1%(C Form) rate in the pricing.Can anyone please help me out from this situation? Its really very urgent.
Regards
Subhash

Dear subash,
You need to do two things,
I assume that the customer is same ,
then go to sales order , header -- billing -- alt tax classification-1 , put 1 and maintain the tax code for 4 % in VK11 aginst UTXJ at the verty first level with the 4% tax code.
and the same thing ,sales order , header -- billing -- alt tax classification-1 , put 2 and maintain the tax code for 1 % in VK11 aginst UTXJ at the verty first level with the 1% tax code.
In both the cases , customer tax classification is changing , hence system will pickup the correct one .
If customer is different , maintain the same in customer master - billing - UTXJ field instead of mainatining in the sales order.
Just try.
saravanan

Tax Rate Determination in Credit Memos With Ref to Invoices

The requirement in US is that when the customer has changed his address to a different region, from that where the services was supplied (The region in which the customer (ship-to party) was residing when the invoice was raised) and if a credit memo is raised with reference to this invoice, then the taxes applicable on the credit memo for this customer should be the rates applicable for the state where the original invoice was raised. However currently in SAP the new customer address is updated in the billing document (invoice that was raised for the region where the customer had his place of business previously) and hence the original region code in the invoice will not be available and will be overridden with new region code.
Consider the following example:
1 - Invoice raised on 01-Jan-2010 to a customer whose region is Florida and tax rate is "X %"
2 - On 01-Feb-2010 the customer in Florida changes his place of business to Texas region.
3 - On 01-March-2010 a credit memo is raised with reference to the invoice dated 01-Jan-2010 u2013 On this credit memo the tax rate applicable will be of the region of Texas u2013 Example u201CY%u201D
The requirement is that in the credit memo the system should capture the original region code or there should be a provision to change the region code of the customer (ship-to party) at line item level u2013 so that the tax determined is applicable to the region where the customeru2019s place of business originally existed.
From our side we did check the SAP screen for Creation of contract/Order (VA41/VA01) u2013 However we were unable to find the customer region field in these screens at line item level.
We request you to please look into this at the earliest and let us know what the options that exist for this are.
Please also let us know should you require any clarifications with reference to the above requirement.
Regards
Siddharth Sridhar

Hi Siddharth,
As for the region code that you mentioned, in fact yes, you can change during transaction creation, and Region is coming from the customer master record that you maintained.
You can find it at the Item level --> Partners, but you will not be able to change the Region there.
To change it, double click on the Sold-to Party at Header level, then select Sold-to Party --> Details.. Here you can change the Region accordingly. It will reflect accordingly at the Item level --> Partners.
Note: This change will not change the central master data maintained for this customer. It will only affect this document.
Hope this helps.
Thanks.

EXCISE TAX RATE

HIII
In chapter id combination I am maintaining the Excise tax rate, but then also while capturing eacise invoice system is showing error " No excise rate found for material 1DC010001 ".
Please advise solution for the same.
Moreover in tax code also the BED is not coming from Chapter ID combination; ie; J1ID
Please advise solution for the same.
Thanks,
Ayushika

Hi
In J1ID u have to maintain lotsa things
chapter id
material and chapter id combination
cenvat determination
plant and vendor combo
vendor excise details with indicator for tax rate
then material tax rate
and u have to maintain 100% in the BED condition type in ur tax code
try it

Two tax rates in VF01 screen

Dear friends,
Can anyone help me on the issue below?
There will be 2 tax rate. One of them is:%1 and another:%17.
In the VF01 screen, there will be 2 two tax rates.
If Invoice amount:100$
TAX1: %1=1$
TAX2:%17:17$
and these tax amounts will go different accounts..
Is it possible?
Thanks in advance...

You can achievev this by maintaining to Different TAX Account Keys in Your Pricing Procedure.
Say,
ZTX1 - TAX1- ZT1
ZTX2 -TAX2 - ZT2
Maintain one Tax code, say, V0 for output tax code for them.
Accordingly, in VK11 maintain condition record for the tax condtion type
ZTX1 - TAX1- 1% - V0
ZTX2 -TAX2 - 17 % - V0
To maintain different account key used Tcode OBCN
Different GL can be assisted to these Account keys ZT1 & ZT2 by using Tcode OB40.
Use Tcode FTXP for maintaining Output Tax Tax Code.
Other relevant links for undersatnding
- [Tax Determination Rules|http://www.sap-img.com/sd009.htm]
- [SAP SD Sales Tax Determination - Tcodes|http://www.sap-basis-abap.com/sapsl002.htm]
- Tax config for USA
Hope this can assist you.
Thanks & Regards
JP

Plant in Madeira - tax rate different than mainland Portugal

Similar Messages

Maybe you are looking for