Play All Script does not Play All !!

i need to be able to add a Play All button to the various menu pages on my project.
I tried using the sample scripts in the manual, and aside from changing the movie file names, it was letter and space perfect. Yet when i tried testing it using the Simulator the first movie played through but then instead of jumping to the next movie it just went back to the menu.
Is there a problem with the script in the manual, or perhaps simulator does not simulate this particular function? ideas how i should tackle this?
thanks
adam

If you have muliple tracks in DVDSP, I usually use stories to handle play all behaviors. This allows you to let each track end jump back to the menu, but specify a different and jump for the stories, to go from one story to the next track's play all story.
If you are using scripts, you need to set the end jumps to the scripts. I find using scripts as pre-commands on a track doesn't always work, particularly if you press the "next" button on the remote. So the flow would go something like this:
menu: jump to script "play all, which sets your "play all" gprm to 1
script jumps to track, which jumps to script "after track so-and-so" which says if play all=1, then play next track, otherwise, return to menu.
each track needs to jump to a new script which tells it what to do by checking for the play all gprm

Similar Messages

Script does not get called

Hi there, I am trying to setup a quad view on my stage by
placing 4 sprites on the stage with the same 3D cast member. I then
apply a behaviour script that initalizes the 4 sprites in their
correct positions and sets up the 4 different camers as follows...
topView
perspView
sideView
frontView
... however, doing so, the script gets called only on the
first sprite and the other 3 sprites do not react with the
behaviour script. As a matter of fact, I also have a sendAllSprites
command inside the behaviour script and it does not send the
message to all of the sprites with that piticular behaviour script.
Is the reason why the behaviour script does not work on the other 3
sprites because I need a diferent 3d castmember for each
sprite?

Hello,
You don't need to place 4 sprites of the same W3D cast member
in the score.
1- Place a single occurence (sprite) of the W3D cast member
in the score
2- Create 4 cameras either in your 3D package or by code
using member.newCamera():
topView
perspView
sideView
frontView
3- Set the rect of the four cameras so they correspond to
each corner of the screen
4- Use sprite.addCamera() in order to add the four cameras to
the W3D sprite
That's all you need.
Best regards,
Karl Sigiscar.
http://www.chromelib.com

HELP NEEDED. Plugin container stopped working / Script does not respond

Hi!
I am aware that there are numerous articles about this problem, but unfortunately none of them solves my problem.
Very frequently, at least once a day (usually from 3 to even 7 times a day) my Mozilla Firefox freezes and I am forced to restart it. It typically occurs when I try to open a page with some interactive content in it (youtube, some fancy flash pages, even gmail document preview). When I try to close it, Windows pops up a message saying that "Firefox stopped working" and terminates the application itself, and then another window pops up, saying "Plugin Container for Firefox stopped working". It's usually either that, but sometimes Mozilla also shuts itself without any warning and the same message appears.
As for "script does not respond", it does happen as well, although way more seldom. Usually it happens on the pages with lots of images. The whole browser then freezes for couple of seconds, then it pops up a window saying that the script does not respond and asks whether I want to force it to continue or not. It doesn't make any difference which option I choose because usually the browser crashes anyway.
I am using version 34 and I made sure all my plugins and addons are up to date. I also disabled hardware acceleration and tried to reinstall whole flash thing. I wonder whether it's the fault of one of my addons, but I admit I am not too eager to try and disable them all and then test it one by one because it would take up way too much time.
Apart from that, none of the previous solutions seem to help, and the problem really gets on my nerves because numerous times I lost a huge block of text I was writing. Now I learned to copy everything I write couple of times :/
Maybe the crash reports will help. I'll link them from the newest to the oldest (for some weird reason they are 3 crash reports from today, yesterday and 3 days ago - weird, because the browser has shut itself today at least twice, not to mention previous days):
https://crash-stats.mozilla.com/report/index/ba7f5087-3d7d-4b2c-b9b1-04e6d2150105
https://crash-stats.mozilla.com/report/index/72eaf792-5f06-445b-806c-cd7922150104
https://crash-stats.mozilla.com/report/index/c3f81ff8-df10-45a6-8400-1c5912150103
I'll be glad for any help because, honestly, I can't stand it anymore. No reinstalling of Firefox or restoring settings to default have helped me yet.

Hmm, that's pretty bad. Often if Windows is stepping in with the crash report, then the issue is with a driver incompatibility, most commonly a display driver.
Here are a couple things to try:
(1) Disable Firefox from using hardware acceleration
This is the traditional workaround. You can use:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
That takes effect the next time you exit and start Firefox up again, which the way you describe it, might be quite soon.
(2) Disable the Flash player plugin from using hardware acceleration
This is a separate setting. See this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable the Flash plugin's protected mode feature
Protected mode has security benefits, but is not compatible with all systems for some reason. It can stall scripts on some systems, for example. You can disable the feature by creating or editing a settings file. The following pages/posts provide different approaches:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078 (alternate version of Carm's batch file with a few changes by me: [https://onedrive.live.com/?cid=f7d304d92388737d&id=F7D304D92388737D!336&ithint=file,.bat&authkey=!AP2FXW2Y_3BXZyo])
Any improvement?

Script does not pick up values as intended

Hi
I have written a CALC routine where in i want to do the following:
-If there is any input done for that rate in the month, the routine should do nothing
- If there is no input in that rate account in the month, it should pick up the previous period data.
But this IF condition does not work and I have not been able to understand why so.
Can someone pl tell me what goes wrong in the below script?
If i remove the IF command the script works (but if then overwrites any input made for the period)
SUB Exch_Rate_Cf
'carry forward of composite exchange rates for FA Opening Balances
IF HS.GETrate("A#Exch_EquCap.I#[ICP None].C3#[NONE].C4#[NONE]") = "0" THEN
IF HS.PERIOD.MEMBER = "JULY" THEN
HS.EXP "A#Exch_EquCap.I#[ICP None].C3#[NONE].C4#[NONE] = A#Exch_EquCap.Y#Prior.P#Last.I#[ICP None].C3#[NONE].C4#[NONE]"
ELSE
HS.EXP "A#Exch_EquCap.I#[ICP None].C3#[NONE].C4#[NONE] = A#Exch_EquCap.P#Last.I#[ICP None].C3#[NONE].C4#[NONE]"
END IF
else
END IF
END SUB

Hi
I have tried both the approaches.
"JUL' does not work as we have given JULY as the dimension member name
The other approach also does not result in any result being calculated --- i think something is going wrong and the script does not go into the IF condition itself :(

The PageDirective script does not define the findServerBehaviors function

We run 2 servers at work and both have sites with legacy ASP.
We just upgraded to DW CS3 and now I get this error message when I
make a new ASP VBScript page:
quote:
The PageDirective script does not define the
findServerBehaviors function
Any ideas why it would be throwing this message? It even does
this with the default asp page code

It just keeps coming...
The Dynamic Checkbox script does not define the findServerBehaviors function.
The Dynamic Radio script does not define the findServerBehaviors function.
The MoveToFirst Record script does not define the findServerBehaviors function.
While executing findServerBehaviors in DynamicData.htm a JavaScript error occurred.
... and numerous other errors: fill in the blank: "________ script does not define the findServerBehaviors function."
Configuration file issue, maybe?

Remediation Script does not work for Compliance Settings Configuration Item / Baseline

Hello Everyone,
I've created a script to check NetBios over TCP/IP state on the NICs and if it is Enabled (Non-compliant) it should run the remediation script to Disable it (Compliant). The script identifies correctly if it is compliant or not but it's not compliant the
remediation script doesn't kick in.
Discovery script:
$adapter=(gwmi win32_networkadapterconfiguration | where {$_.ipenabled -eq "1"})
Foreach ($nic in $adapter) {
write-host NetBIOS Options is now -> $nic.TcpIPNetBiosOptions
Remediation Script:
$adapter=(gwmi win32_networkadapterconfiguration | where {$_.ipenabled -eq "1"})
Foreach ($nic in $adapter) {
$adapter.settcpipnetbios(1)
Any clue why this is happening and how can it be fixed?
Thank you all in advance.

Hi,
Please add an a line to create an event in the Application log of the computer to check if remediation had been performed.
SCCM 2012 Compliance – Auto Remediation
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft
does not guarantee the accuracy of this third-party contact information.Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Date time picker script does not look right when calender pops up

When I use this script in my header, my date time picker does not look right. The pop up calender works but the layout is off, here is the code I am adding to my header:
<link href="http://netdna.bootstrapcdn.com/twitter-bootstrap/2.2.2/css/bootstrap-combined.min.css" rel="stylesheet">
    <link rel="style.css" type="text/css" media="screen"
     href="http://tarruda.github.com/bootstrap-datetimepicker/assets/css/bootstrap-datetimepicker.min .css">
And here is the code I am adding to the body of the html page below: Is it the placement of the code in the header? I've tried the beginning and the end of the hearder but no difference. Thanks for your time on this....
<div id="datetimepicker" class="input-append date">
<input type="text"></input>
<span class="add-on">
<i data-time-icon="icon-time" data-date-icon="icon-calendar"></i>
</span>
</div>
<script type="text/javascript"
src="http://cdnjs.cloudflare.com/ajax/libs/jquery/1.8.3/jquery.min.js">
</script>
<script type="text/javascript"
src="http://netdna.bootstrapcdn.com/twitter-bootstrap/2.2.2/js/bootstrap.min.js">
</script>
<script type="text/javascript"
src="http://tarruda.github.com/bootstrap-datetimepicker/assets/js/bootstrap-datetimepicker.min. js">
</script>
<script type="text/javascript"
src="http://tarruda.github.com/bootstrap-datetimepicker/assets/js/bootstrap-datetimepicker.pt-B R.js">
</script>
<script type="text/javascript">
$('#datetimepicker').datetimepicker({
format: 'MM/dd/yyyy hh:mm:ss',
language: 'en'
</script>

Page is not up yet, can I attach the html to this forum? I'l cut and paste the html below, thanks
<!DOCTYPE html>




 <html class="no-js"> 
<head>

<link href="http://netdna.bootstrapcdn.com/twitter-bootstrap/2.2.2/css/bootstrap-combined.min.css" rel="stylesheet">
    <link rel="style.css" type="text/css" media="screen"
     href="http://tarruda.github.com/bootstrap-datetimepicker/assets/css/bootstrap-datetimepicker.min .css">
      
    <meta charset="utf-8">
    
    <meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
    
    <title>Hawaii Beach Weddings</title>
    <meta name="description" content="">
     
    <meta name="viewport" content="width=device-width">
    <link href="style.css" rel="stylesheet">
    
    <link href="//fonts.googleapis.com/css?family=Open+Sans:400italic,700italic,400,700|Merriweathe r:400,700,900" rel="stylesheet">
    
        <script src="js/modernizr-2.6.1.min.js"></script>
    <script src="js/modernizr-2.6.1.min.js"></script>
</head>
<body>
    
    
    <header id="master-header" class="clearfix" role="banner">
        <hgroup>
            <h1 id="site-title"><a href="index.html" title="Your Site Name">Hawaii Beach Weddings</a></h1>
            <h1 id="site-title2"><a href="index.html" title="Your Site Name">xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx</a></h1>
            <h2 id="site-description">Where the Sun, Sand and Love come together...</h2>
        </hgroup>
    </header> 
<div id="main" class="row">
    
    <nav class="main-navigation span12 clearfix" role="navigation">
        <h3 class="assistive-text">Main menu</h3>
        <ul>
            <li><a href="index.html">Home</a></li>
            <li class="current">
                <a href="about.html">About</a>
                <ul class="sub-menu">
                    <li><a href="http://www.google.com">Subpage 1</a></li>
                    <li><a href="#">Subpage 2</a></li>
                </ul>
            </li>
            <li><a href="contact.html">FAQ's</a></li>
        </ul>
    </nav> 
<div id="content" role="main" class="span12">
    <article class="page hentry">
        <header class="entry-header">
            <h1 class="entry-title">Simple Beach Weddings</h1>
        </header> 
        <div class="entry-content">
            <p>We specialize in simplicity for your beach wedding. Let us keep it simple by offering what you need to make your beach wedding easy </p>
            
            <section id="typography">
                <h1>I am first a photographer who loves to<small></small>capture "the moment."</h1>
                <p>By organizing Hawaii Beach Weddings, I have allowed myself to do what I do best: capture your moment. I use industry professionals to make a sometimes stressful event easy. By keeping it to a few simple choices: A Minister (necessary), Flowers, Music, Video, Chairs (optional), I have allowed you to quickly design your wedding event and enjoy your stay in the islands. </p>
                    <div class="row">
                        <div class="span7">
                            <h2>Ministers:</h2>
                            <h3>Reverand Robert Hoyt</h3>
                                            <p> </p>
                        </div>
                </div>
                  <h2> </h2>
                    <div class="row"></div>
                    <div class="row">
              </div>
                <h2> </h2>
            </section>
            <section id="tables">
              <div class="row">
              </div> 
            </section> 
            
            <section id="forms">
                <h1>Let's begin with your contact information.</h1>
                <form class="row">
                    <fieldset class="span5">
                      <p>
                        <label>Name
                          <input type="text" required></label></p>
                          <br>
                          <p><label>Phone number with area code <input type="text" pattern="\d{5}(-\d{4})?" title="a US Zip code, with or without the +4 exension" placeholder=" 123-456-7891"></label></p>
                          <br>
                          <p>
                          <label>Email
                          <input type="email"></label></p>
                          <br>
                          <h1>Where would you like your wedding to be?</h1>
             <p><label>Honolulu (South Oahu)<input type="radio" name="rad"></label></p>
             <p><label>Waimanalu (East Oahu) <input type="radio" name="rad"></label></p>
                <br>
                <h1>What date & time would you like to have your wedding?</h1>
                 
                      <div id="datetimepicker" class="input-append date">
      <input type="text"></input>
      <span class="add-on">
        <i data-time-icon="icon-time" data-date-icon="icon-calendar"></i>
      </span>
    </div>
    <script type="text/javascript"
     src="http://cdnjs.cloudflare.com/ajax/libs/jquery/1.8.3/jquery.min.js">
    </script>
    <script type="text/javascript"
     src="http://netdna.bootstrapcdn.com/twitter-bootstrap/2.2.2/js/bootstrap.min.js">
    </script>
    <script type="text/javascript"
     src="http://tarruda.github.com/bootstrap-datetimepicker/assets/js/bootstrap-datetimepicker.min. js">
    </script>
    <script type="text/javascript"
     src="http://tarruda.github.com/bootstrap-datetimepicker/assets/js/bootstrap-datetimepicker.pt-B R.js">
    </script>
    <script type="text/javascript">
      $('#datetimepicker').datetimepicker({
        format: 'MM/dd/yyyy hh:mm:ss',
        language: 'en'
    </script>
    <br>
                     <h1>What type of flowers would you like to have?</h1>
                     <p>
                            <label>Bouquet<br>
                                <select>
                                    <option>None</option>
                                    <option>Red roses</option>
                                    <option>White roses</option>
                                    <option>Hibiscus</option>
                                </select>
                            </label>
                        <p>
                            <label>Flowers<br>
                                <select>
                                    <option>None</option>
                                    <option>Roses</option>
                                    <option>Orchids</option>
                                    <option>Hibiscus</option>
                                </select>
                            </label>
                              <h1>What type of Leis would you like to have?</h1>
                            <label>Leis<br>
                                <select>
                                    <option>None</option>
                                    <option>Kukui nut (male)</option>
                                    <option>Orchids (inexpensive)</option>
                                    <option>Stephanotus (sweet smelling</option>
                                </select>
                            </label>
</fieldset>
<fieldset class="span4">
                      <p>
                       
                        <p>
                           <label>Music<br>
                                <select>
                                    <option>None</option>
                                    <option>solo singer with ukulele</option>
                                    <option>solo singer with guitar</option>
                                    <option>solo guitar instrumental</option>
                                    <option>small ensemble</option>
                                </select>
                            </label>
                          <br>
                          <label for="s">Number of Chairs</label><p>
                            <select id="s">
                                <option>none</option>
                                <option>1</option>
                                <option>2</option>
                                <option>3</option>
                                <option>4</option>
                                <option>5</option>
                                <option>6</option>
                                <option>7</option>
                                <option>8</option>
                            </select>
                        </p>
                        <p>
                          <label for="t">Notes</label> <textarea id="t" cols="30" rows="5">Textarea text</textarea></p>
                    </fieldset>
            
        </div> 
    </article> 
</div> 
</div> 
    <footer id="footer" role="contentinfo">
        
    </footer> 
    
    <script src="//ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js"></script>
    <script>window.jQuery || document.write('<script src="js/jquery-1.7.2.min.js"><\/script>')</script>
    
    <script src="js/script.js"></script>
</body>
</html>

DARI (Arabic) script does not work in WORD 2004

When I change to AFGHAN DARI in MS WORD I can type the characters (although as other discussions have shown KEYBOARD viewer does not work) BUT they are not joined properly in the words.
i.e. the same form of the character is used whether it is at the start, middle or end of the word. PATHETIC - how would you like to write all English in UPPERCASE??
MS WORD does the correct thing on Windows XP
Does anyone have any ideas - apart from throwing this new MacBook away?
Any Word processors for the MAC that work properly?
Please HELP!!

Does anyone have any ideas - apart from throwing this new MacBook away?
Yes, throw Word away. MS Office for Mac has no support for Arabic, Hebrew, Devanagari, etc.
All other word processors (except Appleworks) have better support for Arabic than Word does. Mellel is the best. See this note:
http://homepage.mac.com/thgewecke/TypingArabic.html

Script does not work anymore after updating to FM 12.0.3

Hi,
With TCS5, Robohelp would crash when importing FrameMaker books to RH, because the FM files had embedded graphics. So, I found a script to externalize the graphics before doing the import (the script is: ExtendScript of the week: Externalizing Graphics « TechComm Central by Adobe). However, this script is not working since I updated from 12.0.2 to 12.0.3. And without this script, we can't create HTML5 output!
Although I wrote a few simple scripts, this one is quite complex and would be difficult to debug. Anyone here knows what could have changed to make the script useless after such a small update? Or can update this script to make it work?
Thanks!

Hi again,
For those who would like to know... I made this script work with 12.0.3. I simply removed the instructions that added an item in the File menu and stuff about a report, which I don't think ever worked. So, I still don't know exactly why it didn't work anymore (don't have time or knowledge to investigate), but I'm still interested to know.

Script does not work on the second page

Hi, I believe it's just a little problem:
I use the following script( I just copied a part of it, so don't care
about missing brackets etc.)
to automatically fill some text field according to the selection in a drop-down field:
switch (xfa.event.newText) {
case "8 8x1":
berstdruck.rawValue = "≥65";
htberst.rawValue = "≥20";
maxflex.rawValue = "≥34";
deflect.rawValue = "≥6";
flexforce.rawValue = "≤44";
minbend.rawValue = "≤40";
permeation.rawValue = "≤2";
length1.rawValue = "-1,5...+1,5"; remark:these fields are on page 2
length2.rawValue = "-1,2...+1,2"; remark:these fields are on page 2
break;
The last two fields on page 2 of
my document are not filled automatically.
The others work well.
Can somebody help?
Thanks
Alex

You'll need to fully qualify the fields that are on other pages. The reason for this is these fields are not underneath the same parent in the XML DOM as where you're script is running (the drop-down). So it does not find the fields on the other pages and doesn't know where to look for them.
A fully qualified SOM expression would look something like this:
xfa.form.formName.pageName.subFormOnThePageNameIfExists.fieldName
H.

Setting field to NULL using script does not work

Hi,
This is a Hibernate and Oracle SQL developer-related question.
My application uses salesmeeting with customers and an officer. When the salesmeeting is active, OfficerID is set to the salesmeeting. If the officer closes the salesmeeting, officerID shall be set to NULL. Now, sometimes when explorer doesn't close correctly, the OfficerID is still set in the database. So, when another officer tries to login to the salesmeeting it's is locked by the first officer because only one officer at the time can access a salesmeeting.
Now to the problem: I'm trying to develop a script which simply updates the database and sets the officerID for a specific salesmeeting to NULL in order to "unlock" that salesmeeting.
The script looks like this:
UPDATE SALESMEETING SET OFFICERID = NULL
WHERE OFFICERID = 'XXXXX' AND SALESMEETINGID = '12345'
I commit the changes and OfficerID is set to NULL or (null) as it looks is SQL developer.
When logging in to the application, officerID is set to the active officer, so far so good. But, when running the Hibernate method saveOrUpdate() for the salesmeeting, the server hangs and nothing happens.
The thing is, when I manually set officerID to NULL by simply leaving the field blank, saveOrUpdate() works perfectly fine.
The third way of setting trying to set the value to null, by manually setting officerID
by typing (null) in the field generates another problem (I guess this is interpreted as the String "(null)")?
So, what I am wondering is what my script does wrong, is it not really setting officerID to NULL or is there something I need to understand about Hibernates saveOrUpdate()?
Thanks!
Message was edited by:
user615023

Hi,
To set a column to null, you have written right script.
Please make sure that 'null' & null are entirly different thing.
may be when system get hang, you might have written 'null' in stead of null.
Thanks.

Installing application in shutdown script does not work

Hello,
I'm trying to organise the deployment of office 2013. I want to give users the choice between installation during startup and installation during shutdown of their computer.
Installation during startup works fine: installation starts and the user can use their computer and wait for the installation to finish in the background.
Installation initiated from a console window works fine as well.
However, installation using a shutdown script doesn't work as the installation command returns immediatly, the script ends and the computer shuts down.
I have changed the gpo script timeout setting.
In the powershell script, I execute the installation using "start-process" with the option "-wait". It seems like this command returns immediatly and the setup is never executed as it does not start logging the installation progress to
a local log file.
The shutdown script runs fine and it also logs its progress to a logfile on a network share so I'm sure the script actually runs and it has network access as well.
Any clues as to why the installation might fail during a shutdown script and work fine in other situations? Thanks!
I'm not sure if this is a gpo or an office 2013 deployment question. I'm thinking the environment during execution of a shutdown script might be different so that's why I'm asking my question here.

Hi,
Based on your description, we can also try asking for suggestions in the scripting forum to see if they can provide a better solution.
The Official Scripting Guys Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Automator Script Does Not Stop

Mountain Lion on MacBook Air
This Automator App Script (enablelocal.app)
on run {input, parameters}
do shell script "sudo tmutil enablelocal /" password "xxxx" with administrator privileges
return input
end run
runs and changes the local backup setting, closes terminal, but the workflow does not stop (the gear keeps rotating in the menu bar until I manually stop it).
What else do I need to have the workflow stop?
Thanks

sudo never belongs in a do shell script command.
Consider what happens when you run sudo at the command line - the chances are it prompts you for the admin password. do shell script specifically prevents user interaction, so sudo asks for a password, but there's no way for you to see this, or enter a password to continue. That's what's happening here - your sudo is waiting for a password it can never get.
'... with administrator privileges' is the right way to go. Because this isn't part of the command you're passing to 'do shell script, AppleScript can elevate the privileges (including prompting for username and password) befor invoking the shell command. Problem solved.

Automator - Run Shell Script - Does not return when script launches firefox

Automator does not work the same on my MacBooks as my Mac mini! Both are latest Snow Leopard. I'm trying to automatically setup my MacBook after it decides if I'm at work, or elsewhere.
The Automator Action "Run Shell Script" (Shell: /usr/bin/perl) does NOT return control when attempting to launch Firefox:
system("/Application/Firefix.app/Contents/MacOS/firefox-bin -private news.google.com &");
Note: the ampersand should cause Firefox to start as a background process.
It only returns control after I close Firefox. I have a "Show Growl Notification" as the second action, so I know that the first action has not completed. Odd thing is that this works on my Mac mini. I also noticed that another difference: on my MacBook status is displayed in the top toolbar when the Automator application is running.
Any ideas?

Thanks, it worked. I forgot about stderr and stdin.
I'm using Perl as it is part of a bigger script. I can quickly and easily figure out if I am at work where my MacBook is plugged into a network:
my $ethernet = qx(ifconfig en0) =~ m{status:.active}xms;
if ($ethernet) {
# setup stuff for work environment
} else {
# setup stuff for mobile environment
}

Java script does not seem to be working with Firefox 3.6

I am using Firefox 3.6, and recently installed MAC OS 10.6.5. I had a problem today working on a website and java script would not work with this browser. I was able to work on Safari though...

To fix this you will need to delete your firefox profile directory to get the new firefox 3.6.13 to work with the java plugin, its a good idea to run an update for java as well before hand. Or you can totally get rid of firefox and the profile directory and load an older version, just turn off automatic firefox updates.

Play All Script does not Play All !!

Similar Messages

Maybe you are looking for