PLD Layout change option is not avialable in Limited User Licenses

Hi Experts
I have purchased 2 CRM & 2 Logistics Licenses. In both of licenses PLD designer is not opened. It gives message 'You can't open window (60213) Type List Form with your current License. Is it not possible to open PLD design with limited users. I have check that I give full authorization to the users.
Regards
Jitender

Hi,
Editing PLD layouts is considered a part of system management tasks for SAP Business One. This means that the Limited Users are not able to edit the PLD layouts.
Document settings (numbering, print preferences) is set NULL for both CRM & Logistics limited license. so it is not possible to change the layout too.
Regards,
Rakesh N

Similar Messages

FWB 00013 "You do not have enough Named User licenses" error

I have recently installed Edge XI 3.1. I converted my old 6.5 installation to the new Edge framework and brought over all existing userids.
In Edge, I am licensed for 55 Named and 20 Concurrent. I went through the Properties for each and every User I have to count how many were defined as Named - there were only 3, (and they happened to all have been General Supervisors in the old 6.5 version - so they migrated over to XI 3.1 as Named).
When I try to modify an existing user from Concurrent to Named, (CMC/Users and Groups/Properties tab of the User, under Connection Type), I get the error message, "FWB 00013 You do not have enough Named User licenses to make this user a named user. You have 55 Named User licenses."
It thinks I have already used up all of my 55 Named User licenses, but there are only 3 userids that are marked as Named.
However, when I look at CMC/Settings/View global system metrics, it shows a count of 55 Named Existing User Accounts.
I need to be able to mark certain users as Named instead of Concurrent, but am not able to due to error.
Has anyone seen or experienced this? Any suggestions?
Thanks.

Tim, thanks for your reply - and yes, you're right...
I heard from SAP Support and was notified that this is a known issue with XI3.1 Edge. They say an enhancement request has already been raised with the Product Group - although there is no ETA for when a fix will be released.
The current workaround is to delete the existing concurrent user that you want to be a named user. After deleting the user, then re-add the same user as a named user. This works, but is a cumbersome task if you have a lot of named user licenses!
Additionally, if you want to add a brand-new named user - you still get the same error. So a brand-new user would need to be created as concurrent, deleted, and re-added as named. Convoluted? Yes.
Thanks again for your input.
Angelia

You do not have enough Named User Licenses...But I do!

You do not have enough Named User Licenses to make this user a named user. You have 5 Named User Licenses.
On our Test system, I have five named and five concurrent users. I've switched all but two to concurrent, and I cannot switch anyone to Named. I even disabled all the users except two, and I keep getting the error when I try to swith the remaining to Named.
Any ideas?
Thanks!

Joe Parra wrote:
So as an ugly workaroud, we can delete the user and re-create.
This is due to a bug in the product which is currently escalated. The next fixpack released should hopefully fix but I'm noit sure which one it's slated for right now.
Regards,
Tim

Upload multiple documents option is not visible for one user in SharePoint 2007.

Hi,
For one user Upload multiple documents option is not visible.
We are using SharePoint 2007 environment.
User is using IE 9 32 bit,Office 2010.
I did repair office 2010.
Active x controls are enabled.
Please anyone help me on this.
Thanks,
Ashok

Hi,
According to your post, my understanding is that after client upgraded to Office 2013 the option for Upload multiple document was grayed out.
I try to reproduce the issue in my environment, however everything works well.
My configuration of system is:
Windows 8.1;
IE11;
Office 2013 32bit.
Please repair the Office 2013 to check whether it works.
In addition, there are many thing you need to check. Please refer to:
http://sharepointknowledgebase.blogspot.com/2013/09/upload-multiple-documents-is-disabled.html
Here is a similar thread for your reference:
http://social.msdn.microsoft.com/Forums/en-US/1a5af332-ed21-41ee-bf64-9122a7439623/sharepoint-not-activating-stsuplddll-upload-mutliple-documents-greyed-out?forum=sharepointgeneralprevious
More information:
"Upload Multiple Documents" is disabled in Document Library
SharePoint 2010 : How to Enable Uploading Multiple Documents Functionality
Best Regards,
Linda Li
Linda Li
TechNet Community Support

"Resend" option is not working for specific user. "The Operation Failed" Exchange 2010 Outlook 2013

Hi Everybody. I have a weird one for you.
I have a user that gets an "operation failed" message whenever trying to use the "resend" option on any email (It's the one right under recall). I had tested up and down on her machine. Exchange 2010 Outlook 2013
Ran in safe mode, recreated her profile, disabled virus scanning, repaired office. (weird, the font just changed sizes on me)
After all of this I tested on other computers, other users seem to be able to "resend" just fine. However her account does not work on any computer I try, internal or external to the network.
It looks more like a profile issue.
She's a very active archivist, so she only has 486MB of space used by her mailbox.
It's well under quota.
It's been really puzzling me.
MCSE 2003, Exchange. MCTS Vista, 7. Administrator of awful, neglected website http://timssims.net

Hi Timssims,
Since there is only one user in the org has this issue, it seems an issue on the Outlook client side.
I suggest asking Outlook Forum for help so that we can get more professional suggestions.
For your convenience:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
However I also have some suggestions for your reference:
1. If this issue occur on Cached Mode, I suggest turning to Online Mode for testing.
2. Please also paste the detailed error message if "operation failed" is not the
complete information.
3. If still not works after perform operations above (including suggestions from Outlook Forum), I suggest re-creating a new mailbox for the specific user just as Martin suggested.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Changes in prompts not reflecting for some users

Good Morning all,
I have changed a number of dashboard prompts in 11.1.1.5 to default to a dynamic repos variable.
The changes are shown on my obiee, and some other users obiee. But some users are not seeing the changes that I have made. i.e. the prompt still defaults to a hardcoded value which was the case before I changed it.
Tried:
-logging in and out
-closing cursors
-removing any saved customizations.
Note I made the changes last week so everyone has logged in and out.
Any ideas why this is happening?
Thanks
Kev

Thanks for the swift response.
Users have cleared browser caches,
I have cleared obiee cache.
Do you mean clearing the query cache via command line?
Please note that this is dev environment so caching is turned off for obiee.
thanks
Kev

DVD Writer not available under Limited User account

Hi
In one of our computers, with Encore CS3 installed and a Pioneer DVD Writer (with functional ASPI layer), I have the following problem :
If I try to export a project to DVD burning, the writer is not available, but if I modify the account of the user to set it as an administrator, the writer appears on the DVD Export window.
Can you help me ?

I installed Nero Burning Rights to give rights to Everyone and changed writer drive letter to first available letter (writer + reader on the same computer) and it works !

Another fix to try for Flash 10.1 not running for limited users

I tried these instructions from this website:
http://techreport.com/forums/viewtopic.php?f=30&t=73051&start=0&st=0&sk=t&sd=a
http://techreport.com/forums/viewtopic.php?f=30&t=73051&start=0&st=0&sk=t&sd=a Quote:
"The latest build of Flash is 10.1.82.76, a security update. The installation of that update created a permissions conflict on my system and at least one other which caused embedded Flash content to not display.
The fix for this is to uninstall Flash and then delete the following registry key (Admin rights will be required).
HKEY_CLASSES_ROOT\MIME\Database\Content Type\application/x-shockwave-flash
Then install Flash and the permission mask should now be correct. A quick test of embedded content will confirm."
After trying various ideas over the past three days, this was the only one that worked for me. For those unfamiliar, you can get to the registry key by doing Start/run/regedit. Then keep expanding each section til you get to this particular key. Right click on it and delete. You might want to set a restore point first, just in case things go wrong. Start/All Programs/Accessories/SystemTools/SystemRestore then choose create a restore point.

function(){return A.apply(null,[this].concat($A(arguments)))}
GCMarion wrote:
I tried these instructions from this website:
http://techreport.com/forums/viewtopic.php?f=30&t=73051&start=0&st=0&s k=t&sd=a
http://techreport.com/forums/viewtopic.php?f=30&t=73051&start=0&st=0&s k=t&sd=a Quote:
"The latest build of Flash is 10.1.82.76, a security update. The installation of that update created a permissions conflict on my system and at least one other which caused embedded Flash content to not display.
The fix for this is to uninstall Flash and then delete the following registry key (Admin rights will be required).
HKEY_CLASSES_ROOT\MIME\Database\Content Type\application/x-shockwave-flash
Then install Flash and the permission mask should now be correct. A quick test of embedded content will confirm."
After trying various ideas over the past three days, this was the only one that worked for me. For those unfamiliar, you can get to the registry key by doing Start/run/regedit. Then keep expanding each section til you get to this particular key. Right click on it and delete. You might want to set a restore point first, just in case things go wrong. Start/All Programs/Accessories/SystemTools/SystemRestore then choose create a restore point.

Adobe Reader will not run with limited user account.

I am trying to upgrade our Citrix Server Farm, from Reader 8.0 to 9.1, and am running into some issues. First I uninstalled Adobe Reader 8.0 and then installed 9.1 from Adobe's site. Aftter the install completed I was able to run 9.1 without any problems. However today, when some limited users started working, they started getting runtime errors. This only happens with non-administrator user accounts.
the error messages are attached.
After clicking OK, Adobe Reader terminates.
Any insight would be greatly appreciated.

I do believe that I solved my own problem... almost.
http://kb2.adobe.com/cps/404/kb404597.html
"The affected user has a redirected Application Data folder and as a result the network path containing the Application Data uses a UNC path that begins with \\. This UNC path causes Acrobat 9.0 or Adobe Reader 9.0 to incorrectly parse the Application Data path and give the error message."
The article tells me to upgrade to Adobe Reader 9.1... WTF!!! 9.1 is when this problem started, 8.0 worked great! I would stay with 8.0 if I could, but some of our programs require 9.1.

Layout save option in VA05 not active

Dear all,
I have little problem in VA05,
in this report layout save option is not active ,
can anyone guide how to activate it.
Regards,
Talwinder

Hi,
Firstly you should save your layout as system-specific, then you have to go menu>Settings>Layouts-->Administration... to define your layout as default settings.
As thus, when you execute VA05, the new layout will be applied correctly.
Good luck
Z.T

Layout change and save for ALV report

Hi,
I ahve created R3 report in which report has been displayed using ALV grid, I am able to change the layout as I can see the layout -> change option in settings menu, but save and choose option is disabled.
Please advise how to enable layoutr save and choose option for ALV grid.
Thanks,
Piyush

Hi,
According to sap help you need authorization to save Layout
[ALV -Layout|http://help.sap.com/saphelp_sm32/helpdata/en/82/839d37664e4d45e10000009b38f8cf/content.htm]
To save layouts for all users, you need the authorization S_ALV_LAYO with activity 23 as of Release 4.6C. You can only go to the layout administration if you have this authorization.
You must maintain the authorization object S_ALV_LAYO using the user administration.
If you would like to use or save the Excel view in your layout, you also require the additional authorization S_BDS_DS with activity 01,02,03,06,30; CLASSNAME ALVLAYOUTTEMPLATES and CLASSTYPE OT.
Furthermore, there are applications that have their own authorization checks installed.
In some ALV lists, you can only save user-specific layouts. In these cases, the indicator "user-specific" is active , on a grey background and unable to be changed. This is related to the parameter I_SAVE. This controls which options you have to save the layout.
To be able to define default layouts, the parameter I_DEFAULT must have the value 'X'.
Notes 409190 and 601803 also provide further information on authorizations.

SE03 / SE06 System Change Option Scope

Hi All,
We are creating a source system from R/3 to BW in some specify step we need to change the System Change Option of the sistem in a particular client (SE06 -> System Change Option -> No Modifiable to Modifiable and Modifiable to No Modifiable).
My question is: This changes are Cross Client?
Or only apply to the specify client where you are logged?
Best Regards,
Erick Ilarraza

On their own, Global and Compenent specific change options are not client dependent as they are not related to the logical system of the ABAP user nor the master and transaction data (tables with field MANDT as key).
Personally, I think of it as a "call stack" of checks on whether and what you can modify. Perhaps "System Change Update-ability" would have been a better label, but that is not good English.
As the stack is released for a user in a client (a logical program system), the system determines what can be updated at different levels of the stack as it unfolds, a bit like a spring. At the top there is SE06. At the bottom of the spring there are individual authority-checks which are system, client, program flow and context, and user access dependent.
Depending on where in the stack you release the spring from and how you got there, your user can update parts of the stack. Often the term "logical systems" is used in connection with the client (SCC4 client), but also many others such as workflow etc.
=> If the user can pass authority-checks for access at the bottom of the stack (S_DEVELOP is the key control here), then they can also change that which the top of the stack was designed to control. If you can debug, then there is nothing which will stand in your way.
> My question is: This changes are Cross Client?
It depends. You still need to control access via authorizations within the client to secure access to the whole system.
Cheers,
Julius

I am unable to accept the end user licensing agreement for adobe reader on my mac. How do I fix this. I can not open any files.

I am unable to open any pdf files because I have not accepted the end user licensing agreement for adobe reader. I can not find the accept button. I have a mac.

What is your screen resolution? Can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933

PLD layout template cannot change or modify layout contents..

Dear Experts,
I have duplicated a PLD layout template, but then when I wish to change either a picture or texts in the template, I was not able to save the template thereafter.
On a closer look at the DB, I realized the RDOC.CanChange field is set to 'N'. Can anyone advice me the nature of this field if it is related to my problem? and how I can set it to 'Y' using the SBO application.
Thanks in Advance!
Warmest Regards,
Chinho

Hi LIm ,
The header data of any PLD goes to Rdoc and Item level data goes to Ritm table .
Actually this is right concern for u , but this should by Y.
So pls instead of changing from backend , kkep looking fron front end .
If you duplicate a pld template and save this with your own given name, u can do changes .
this is ideal application od PLD.
Chek the database and formula field of your pld .
Hope this will help u .
Rgds,
Premraj

When create PDF the PLD font and layout change

When I create a PDF from the SAP Print Layout Designer, the fonts and layout change. Hoe do not correct this

Check under Document Property for PLD to see what printer has been selected. If it is default, you may change your PDF printer to be your default printer.

PLD Layout change option is not avialable in Limited User Licenses

Similar Messages

Maybe you are looking for