Please,a little help with my N95...

i have a N95 ,i updated the softweare,but my little problem is:
How to extract folders like MEDIA,CONECTIVITI,UTILITES,etc,from folders they are now,because it don't worc with "move to folder",onli "move"in the same folder and i want to extract these folders in root folder,in the principal menu!
How do i do this?

Hi britzinelul24, and welcome to the forum!
A description of how to do what you would like is at this link: http://www.fwrnando.com/blog/2007/n95-menu-in-v20/

Similar Messages

Please can someone help with my N95?

I had the N95 before, but changed the SIM card. Now for some reason I cannot call, text or recieve anything to my phone!
A message comes up ' connection error'. I have tried contacting Customer Services but they have not been very helpful.
Please reply, i would be very greatful, as i have been 3 days without the use of my phone

Is the sim card old at all?
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

Need a little Help with my new xfi titanium

+Need a little Help with my new xfi titanium< A few questions here.
st question? Im using opt out port on the xfi ti. card and using digital li've on a windows 7 64 bit system,? I would like to know why when i use 5. or 7. and i check to make sure each speakear is working the rear speakers wont sound off but the sr and sl will in replace of the rear speakers. I did a test tone on my sony amp and the speaker are wired correctly becasue the rear speakers and the surrond? left and right sound off when they suppose too. Also when i try to click on? the sl and sr in the sound blaster control panel they dont work but if i click on the rear speakers in the control panel the sl and sr sound off. Do anyone know how i can fix this? So i would like to know why my sl and sr act like rears when they are not?
2nd question? How do i control the volume from my keyboard or from windows period when using opt out i was able to do so with my on board? sound max audio using spidf? Now i can only control the audio using the sony receiver.
Thank you for any help..

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

Need a little help with syncing my iPod.

I got a new macbook pro for cristmas and a few cds. After i tried to sync my ipod to itunes i put a symbol next to each song that i got from other cds saying that they were downloading but they werent. Also the cds i downloaded to my ipod for the first time didnt appear at all. Need help.

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

Please, could you help with The System Error?

Hi guys,
Please could someone help me with The system error: The Parameter is incorrect? which appears on the screen when I open Adobe Photoshop?
It is Starter edition3.0 and so far it worked ok and suddenly this message haunts my screen. If I clic OK, whole application disappears. I tried hundred times and checked it is 5.1.2600 and my notebook has got Windows XP Profesional.
Any advice hunging around?
ThaaankxJ

Thank you mark, I'll try.
J
Date: Fri, 18 Mar 2011 17:17:20 -0600
From: [email protected]
To: [email protected]
Subject: Please, could you help with The System Error?
Hi orion,
Sorry that was the impression made by the support agent. If the version of the software that you have is 3.0 or 3.2, then the catalog can be upgraded when you run the trial version of Photoshop Elements. Version 8 had no time limitations, not sure if version 9 will timeout after 30 days or not.
Just install, and when you launch, Elements will automatically convert the catalog to a format that it can read.
-Mark
>

Please i need help with switch from the us store to malaysian store how i can switch

Please i need help with switch from the us store to malaysian store how i can switch

Click here and follow the instructions to change the iTunes Store country.
(82303)

Please help with Nokia N95 problem.

If anyone can help with this I’d be much appreciated, I have a N95 on contract with T-Mobile. When I try to play videos from myspace, or you tube etc… I get a message telling me the following.
“Hello, Either you either have JavaScript turned off or an old version of macromedia's flash player click here to get the latest flash player”.
I then get the option of clicking on a link within the previous sentence statement that directs me to acrobat downloads home page where I get the following message.
“We are unable to locate a web player that matches your platform and browser. Please visit our table of recommended web players”
This is deeply frustrating as in nearly every other way I feel the phone is perfect. If Any one can hep me fix this problem I’d be much appreciated.

daperk,
You should post this to board "Smartphones, Nseries and Eseries Devices".

Need a little help with dial setup on CME

I've got a CME I'm using for testing and I think I need a little help figuring out the proper config to get the system to accept numbers I dial and have those numbers be passed on to an Avaya system (including the leading 9 for ARS in Avaya) via H.323 IP trunks.   I have it working well for internal 5 digit extension calls across the H.323 trunks and I also have it working well for some types of outside calls that gets passed on to the Avaya and then the Avaya dials the call out to the PSTN.   My only real problem is, I can't figure out how to correctly configure CME to examine the digits I'm dialing and only send the digits once I'm finished dialing....not as soon as it sees an initial match.
What's happening is this. I can dial local numbers in my area as 7 digits or 10 digits. The phone company doesn't yet force us to dial area code and number for local calls (10 digits). I can still dial 7 digits.   But...if I put an entry in CME that looks like this....
(by the way, the 192.168.1.1 IP is not the real IP address, that's just an example, but the rest of this entry is what I really have entered in CME)
dial-peer voice 9 voip
description Outside 7 Dig Local Calls Via Avaya
destination-pattern 9.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
...Then it will always try to dial out immediately after seeing the first 8 digits I dial (9 plus the 7 digit number I called)...even though I have a speicifc entry in the system that accounts for calls to 9 plus area code 513. I would have assumed that if I put the specific entry in for 9513....... it would see that and wait to see if I was actually dialing something to match 9513....... instead of 9.......   Understand what I mean?   Because 9513....... is more specific than 9....... but it still tries to send the call out immediately after seeing the first 8 digits I dialed.
dial-peer voice 9513 voip
description Outside 10 Dig Local Calls Via Avaya
destination-pattern 9513.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
...BUT...here's the interesting thing. If I trace the 10 digit call in Avaya, I see that the number being presented to the Avaya PBX is only the first 7 digits of the number....not the full 10 digits...BUT I see a few more of the digits I dialed (like the 8th and 9th digits) after the call is already setup and sent to the PSTN. It's like the CME is trying to send the rest of the 10 digits I dialed, but at that point it's already too late.   It setup the call as a 7 digit call (9 plus 7 digits), not 10 digit like I wanted.
I'm more familiar with how to setup dialing in the Avaya via ARS. My background is Avaya, not Cisco, so this dial-peer config is a little difficult for me until I understand the reasoning of how it examines the numbers and what I should do to make it wait for me to finish dialing....or to tell the system that what I'm dialing will be a minimum or a certain amount of digits and maximum of a certain amount of digits, like the Avaya does. I just need some pointers and examples to look at :-)   I think I've almost got it....but I'm just missing something at the moment.
Just so you understand, the call flow should be like this: Cisco phone registered to CME > CME to Avaya via H.323 trunks > Avaya to PSTN via ISDN PRI trunks connected to Avaya. I have to be sure I send the 9 to the Avaya also, because 9 triggers ARS in the Avaya.
Thanks for your help

Here is a good document that explains how dial-peers are matched in the Cisco world:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#topic7
In your case, it is variable length dial plan you are trying to implenent. To fix it, you need to add a T to force the system to wait for more digits to be entered if there is any.
dial-peer voice 9 voip
description Outside 7 Dig Local Calls Via Avaya
destination-pattern 9.......T
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 9513 voip
description Outside 10 Dig Local Calls Via Avaya
destination-pattern 9513.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
You can also configure the inter-digits timeout using the command timeouts interdigit under telephony-service.
Please rate helpful answers!

Little help with complex XML data as data provider for chart and adg

Hi all,
I've been trying to think through a problem and Im hoping for
a little help. Here's the scenario:
I have complex nested XML data that is wrapped by subsequent
groupings for efficiency, but I need to determine if each inner
item belongs in the data collection for view in a data grid and
charts.
I've posted an example at the bottom.
So the goal here is to first be able to select a single
inspector and then chart out their reports. I can get the data to
filter from the XMLListCollection using a filter on the first layer
(ie the name of the inspector) but then can't get a filter to go
deeper into the structure in order to determine if the individual
item should be contained inside the collection. In other words, I
want to filter by inspector, then time and then tag name in order
to be able to use this data as the basis for individual series
inside my advanced data grid and column chart.
I've made it work with creating a new collection and then
looping through each time there is a change to the original
collection and updating the new collection, but that just feels so
bloated and inefficient. The user is going to have some buttons to
allow them to change their view. I'm wondering if there is a
cleaner way to approach this? I even tried chaining filter
functions together, but that didn't work cause the collection is
reset whenever the .refresh() is called.
If anyone has experience in efficiently dealing with complex
XML for charting purposes and tabular display purposes, I would
greatly appreciate your assistance. I know I can get this to work
with a bunch of overhead, but I'm seeking something elegant.
Thank you.

Hi,
Please use the code similar to below:
SELECT * FROM DO_NOT_LOAD INTO TABLE IT_DO_NOT_LOAD.
SORT IT_DO_NOT_LOAD by WBS_Key.
    IF SOURCE_PACKAGE IS NOT INITIAL.
      IT_SOURCE_PACKAGE[] = SOURCE_PACKAGE[].
LOOP AT IT_SOURCE_PACKAGE INTO WA_SOURCE_PACKAGE.
        V_SYTABIX = SY-TABIX.
        READ TABLE IT_DO_NOT_LOAD into WA_DO_NOT_LOAD
        WITH KEY WBS_Key = WA_SOURCE_PACKAGE-WBS_Key
        BINARY SEARCH.
        IF SY-SUBRC = 0.
          IF ( WA_DO_NOT_LOAD-WBS_EXT = 'A' or WA_DO_NOT_LOAD-WBS_EXT = 'B' )
          DELETE IT_SOURCE_PACKAGE INDEX V_SYTABIX.
        ENDIF.
ENDIF.
      ENDLOOP.
      SOURCE_PACKAGE[] = IT_SOURCE_PACKAGE[].
    ENDIF.
-Vikram

PLEASE I NEED HELP WITH MY 6800 GT IT DRIVING ME NUTS

Please can anyone help i have a 6800 gt graphics card and it keeps crashing my pc every time i play a graphically intense game i get no error reports i have tried unistalling the driver and reistalling but it makes no difference i have checked the temp of the graphics card which runs about 60'c while playing and 50'c in idle the cpu temp is 40'c in idle and goes upto around 60 to 65'c when playing games so i cant see it being a heat problem please can anyone help or can anyone who has had this problem please tell me how they fixed it thanks for ur help
cpu 3.0ghz p4
mb=abit is7.es
1.5gb of ram
os=winxp pro sp2
psu=450w

Also please test RAM modules with Memtest found here Try each RAM module at a time and play game. If it still crahes I'd rule out memory competely. I don't think it very likey to be the problem though, that would usually restart the system.
Could be a power supply problem, most likely.

Please I need help with swf folders.

Hi everybody,
I install adobe flash and when i surf on the internet it is
working. But I have a lot of swf flash folders stored in my disk c.
When I go to open them It appears like adobe flash is not install
in my disk to be able to open these files. I only can open this
files with firefox or microsoft explorer. Adobe flash is only
installed in my system and as i told you i am able to see all the
flash folders which i find on the internet when I enter to any
website with flash adobe folders. I installed and unistalled adobe
flash several times. But this is not resolved.
Please I need help.
Many thanks

Click here and follow the instructions to change the iTunes Store country.
(82303)

Need a little help with Slimbox (Lightbox clone) and Spry data sets

Hello guys!
First of all let me say that I'm not a programmer in any way,
shape or form, and somehow I managed to build me a dynamic
thumbnail gallery that reads data from an XML file and displays it
on my webpage using a Spry data set and a slider widget (yay!)
This is of course only thanks to the many great examples
provided by the Adobe Spry team, and me being stubborn enough to
keep at it, even though I don't really understand what I'm doing :D
But I got to this point where I have basically everything
working, except that I can't get the Slimbox (Lightbox clone)
script to work with the Spry-generated thumbnail gallery.
From what I could understand from other threads on this
forum, is that I need to add an observer somewhere, only that I'm
not sure where and how (those threads are pretty old and the
examples aren't available anymore).
I'm sure you guys know what I'm talking about, anyway, here's
what I got so far:
http://www.riotdesign.com.ar/misc/gallery/test1.html
I have the thumbnail gallery populated from the external XML
file, a basic page navigation using the Sliding Panels widget, and
the Slimbox script which works only on the static test image.
Okay I guess that's it for now, sorry for the long post and
of course any help with this will be GREATLY appreciated :)
Thanks & bye!

Kev,
Where exactly does the .evalScripts = true; text need to go?
Does it go in the href call?
<a href="ManageNotes.asp" title="Manage Notes" onClick="this.blur();
Modalbox.show(this.href, {title: 'Manage Notes', width: 575}); return false;">View your notes.</a>
Thanks for any assistance.
J Bishop

Some problem,please a little help

Hi everyone,
I set the path in a file called jinit.bat saying c:\jdk1.3.1_01\bin,i am able to compile & run the program but i am not able to edit the same program or any other ,if i say edit JJJ.java it is saying ,bad command or file name ,i am not able to know what is the problem,please can anyone help me?...
Thanku..........

Probably you just have to be placed in the same directory of the file .java.
Hello.

Please can anyone help with my registration issue?

Hi - I am having great difficulty registering (and therefore continuing to use) CS6. I purchased this a few days ago and installed.. at the time I could not register as it stated I had no internet connection or my clock was wrong - neither is the case (clock is fine and I have internet). So I chose to register later. Now, every time I try to use Photoshop it states I must register within x number of days or it will stop working.. but every time I try to register it again tells me I have no internet connection. SO I get a message stating I should contact customer support (hard as they are closed when I get back from work) or visit www.adobe.com/getactivated_uk, which I do. This tells me that if I am permanently offline (which I'm not but for the purposes of actually managing to register, let's say I am) that I can: ' Follow the installation or product launch screens until you see a link that says "I cannot connect to the internet" or "Having trouble connecting to the internet". Click the link and follow the instructions on the subsequent screen to initiate offline activation. Instructions there will tell you how to generate a Request Code.' What installation or product launch screens? I have already installed. I can nowhere find an option that states 'having trouble connecting to the internet'. How do I therefore generate a request code? Please can anyone help drag me out of this loop of madness? I am not on t-3 days and counting before it stops working:( So confusing, not at all easy to set up as I had hoped. Please help?

Will do my best. No, I appreciate is isn't Adobe support, I had thought that was forums were for - support and advice, sharing of knowledge? I had hoped someone else had experienced something similar in the past. Maybe I'm wrong, this is fairly new to me. Once I am up and running I will be offering helpful support to others. Thanks for your helpful support

Please,a little help with my N95...

Similar Messages

Maybe you are looking for