Please check the order's object list (inconsistency SOBJ)

Hi Friends;
I am facing a strange issue where I have copied a custom task from SAP standard decision task 00008267 caz I needed to perform some custom requirement on it.
I have done evry thing but then I have observed that Agent assignment is not coming at testing client which is on same server.
I also can not modify any thing at testing client.
So I performed SCC1 from testing client and check but still same issue.
Then I thought of re assigning agent at development client but while making it general task it pop up the message "Please check the order's object list (inconsistency SOBJ)".
And after again performing the SCC1 still the issue exist.
Can any one suggest their inputs where the problem could be and how should I fix it.
Regards
Devraj

Hi Dev,
Can you please share more details? Agent assignment not coming means?
Have you set the task as General in testing client?
Thanks,
Viji.

Similar Messages

Please check the entries, no work list selected

Hi Experts,
We have created one custom transaction to run RV50SBT1 to create deliveries from open purchase orders.
When we are doing a call transaction to the custom transaction in a report, this does not work and does not select open POs for processing.
However, when we run the custom transaction in foreground mode, we get the open PO to process and delivery is created ("create delivery immediately" is checked in all the cases).
I assume that there won't be any issues due to background/foreground processing (as we have tried call transaction in foreground mode and it did not work).
Also, i would like to highlight that this problem is recent one.
There were no recent changes in the program or user profiles(user who is executing the IDOC).
Thanks
Mohit

Hi Neha
Yes, there is a difference in background and foreground processing. Please check if you have any pop up while you are processing in foreground. If this occurs, it will cause issues in the background processing. Please take help of your ABAPer to understand the issue in code. and change the pop up into warming message.
Regards
Vivek Singh

BW variable: Inconsistent in loading. please check use of deleted objects

Hi Experts,
I encountered an error and can not solve it following OSS note.
When I create a variable in query definition for an infoobject, it prompts an error dialog 'Inconsistent in loading. please check use of deleted objects'.
I checked the OSS notes 792779, there is a such description:
The variable existing in the table RSZGLOBV, but not existing in the tables RSZELTDIR or RSZCOMPDIR have inconsistent definition. These situation may return 2 different error messages. When a variable is missing in RSZELTDIR table (or in both together), an attempt to expand a list of variable under a corresponding InfoProvider or a list of text/formula variables will return a message 'Inconsistency in loading...'. All variables which are created for corresponding InfoProvider, text/formula variable are not available. When a variable is missing in the RSZCOMPDIR table only the error message is 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded' in Query Designer
But I checked these tables RSZGLOBV and RSZELTDIR and RSZCOMPDIR. I can find a variable for this infoobject, such as TC_SREG, in these tables. That is, this variable should be availbale in the query definition.
I don't know why.
My sap bw is 3.1, without the program 'ANALYZE_RSZ_TABLES'.
Many thanks for you help.

Hi,
While installing business content make grouping as Data Flow before and collection mode as 'Automatic'. Then expand the Tree in the tree you can see Info Object Catalogue. All installed and activated object will be in green (Active Mode). those will be normally unchecked to install anyway cross check and if found anything check deselect them. Go for Simulation Installation to identify unforeseen errors. Install the same and activate entire data-flow.
Hope your issue will be resolve
Thanks
BVR

PM: how to track the operations in prev.maint order against object list

Dear PM Guru's.
i have one issue in my preventive maintenance scenario. i clubed the same type of machines in one maintenance order under object list tab. and i mention the list operations in maintenance order. suppose in one preventive maintenance order 10 operations are maintained and 5objects are mentioned in that order. Now i like to mention all these 10 operations activities against to 5 objects. how i can assign sequentially? i required like 10operations one by one row wise and 5objects side by side column wise. i would like to update the each operation activity against each machine column? how i have to do this one?
Please suggest me and help me.
regards
Jalendhar Merugu

Using Object functionality, we can maintain many equipments in the order.
But the constraint is that one operation can be assigned to only one equipment. In your case, you have 5 objects. If all 10 operations will be performed on 5 objects, then you have to maintain 50 operations & you should assign the objects.
In other words, if one operation will be performed on 5 objects, then you should define that one operation 5 times & you have to assign to technical objects. You can't share one operation to many equipments.

Unable to lookup System 'SAP_WebDynpro_XSS'. Please check the system object

Hi Guru,
I have problem on Configuration EP 6 SP 19, it i'm already configure 4 system alias is
a. SAP_BSR_EREC
b. SAP_R3_financials
c. SAP_WebDynpro_XSS
d. SAP_ITS_EBU
but can message error is
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'SAP_WebDynpro_XSS'. Please check the system object and the alias..
See the details for the exception ID in the log file
could your help me.....
thanks,
Apri

Hi Apri,
Read over this document...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00bfbf7c-7aa1-2910-6b9e-94f4b1d320e1
Pay particular attention to the section called "Setting Permissions to Portal Content". To make permissions changes, you'll go to System Administration -> Permissions. The document spells it out well.
Generally speaking, if you've got your system object aliased correctly you should not have a problem. However, if the permissions on this system object (or the folder in which it lives) are too restrictive, users won't be able to find the system object and you'll get this error message.
Give it a shot and let us know.
-Kevin

TS1702 Please check the Purchase Order

Please, check the Purchase Order
The date is 05/08/2012.
But, I did not order to purchase (The Simpsons™: Tapped Out, in app purchase).
So, check and refund. ($1.99 & $1.99)
I will be looking forward to your prompt reply.
<Edited by Host>

These are user-to-user forums, you are not talking to Apple.
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/

There was a problem connecting to the server...please check the share name..every 3 seconds. made computer useless

there was a problem connecting to the server...please check the share name..every 3 seconds. made computer useless. Lion. It only complains about one of my PCs that usually shares OK with the imac.

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

On Work Order using Object lists for equip u can manually create Notifi

On a maintenance Work Order using Object lists for equipment you can manually create a notification for each line item.
We want to automate this process to do this when we save the document.
Any ideau2019s on how to do this?
Does a user exit exist for this?

Hi:
Check with Tcode: IBIP - Plant maintenace batch input utility tool.
Hope, it may help!
Thanks,
Murali.

Please check the below Cursor Procedure and correct that code Please

Hai Every One.
Please check the below code I have two issues in that code
1. Invalid cursor
2. Record must be enter
Please correct this code and send me pls its urgent.I cont understand where i done mistake
PROCEDURE fetch_detail_PROC IS
cursor c1 is select * from quota_mast where quota_mast.divn=:quota_mast.divn and quota_mast.QUOT_tyPE=:quota_mast.QUOT_tyPE and quota_mast.INQNO=:quota_mast.INQNO;
cursor c6 is select * from quota_det
where quota_det.divn=:quota_mast.divn AND quota_det.QUOT_TYPE=:quota_mast.QUOT_tyPE and quota_det.enq_num=:quota_mast.INQNO
ORDER BY quota_det.quot_no;
--cursor c5 is select * from acc_mst where cdp=:quota_mast.ccdp and divn=:quota_mast.divn;
--vn acc_mst%rowtype;
i quota_mast%rowtype;
detail1 quota_det%rowtype;
BEGIN
     GO_BLOCK('quota_mast');
for i in c1 LOOP
          :quota_mast.INQNO:=i.INQNO;
                    :quota_mast.DIVN:=i.DIVN;
               :quota_mast.QUOT_NO:=i.QUOT_NO;
                    :quota_mast.quot_type:=i.quot_type;
                    :quota_mast.CCDP:=i.CCDP;
                    select nm into :QUOTA_MAST.PARTY_NAME from acc_mst where acc_mst.DIVN=:QUOTA_MAST.DIVN AND acc_mst.cdp=:ccdp;
                    :quota_mast.pak_for:=i.pack_for_PER;
                    :quota_mast.exc_duty:=i.exc_duty_PER;
                    :quota_mast.vat:=i.vat_PER;
                    :quota_mast.cst:=i.cst_PER;
                    :quota_mast.wct:=i.wct_PER;
                    :quota_mast.ser_tax:=i.ser_tax_PER;
                    :quota_mast.insu:=i.insu_PER;
                    :quota_mast.tot_tax:=i.tot_tax;
                    :quota_mast.tot_val:=i.tot_val;
               :quota_mast.value:=i.value;
                              next_record;
end loop;
     first_record;
GO_BLOCK('quota_det');
               for detail1 in c6
          loop
                    :quota_det.quot_no:=detail1.quot_no;
          :quota_det.ENQ_NUM:=detail1.enq_num;
          :quota_det.item_code:=detail1.item_code;
          SELECT ITNM into :NM FROM itm_MST WHERE DIVN=:quota_mast.DIVN AND iCDP=:ITEM_CODE;
          :quota_det.price:=detail1.price;
          :quota_det.qty:=detail1.qty;
          :quota_det.DISC_PER:=detail1.DISC_PER;
               next_record;
END LOOP;
     first_record;
close c6;
--close c1;
exception
when others then
message(sqlerrm);
message(' ');
END;
Thank you..

Oracle Forms is closely tied to the database meaning you can base your data blocks on your tables and Forms will handle fetching the data. I agree with Christian, your tables lend themselves to using a master - detail configuration and if you need to filter your block then you can use the Data Block WHERE Clause property.
Please correct this code and send me pls its urgent.As to the urgency of your request, the forum is a community of "Volunteers." Enough said.
Regarding your code, I see a several potential problems.
First, how are your QUOTA_MAST and QUOTA_DET blocks synchronized? Are you using a block relationship? Are you using a combination of triggers to synchonize the QUOTA_DET block when you user navigates to a different record in the QUOTA_MAST block?
Second, your Procedure name is "Fetch_Detail_Proc" but you are also fetching Master data as well. What is the purpose of your procedure and where do you call this procedure?
Third, you're using SELECT * in your cursor queries. You should always explicitly name each column. What happens when your table changes and you need to search your code for a column that was dropped?
Fourth, your cursor queries are referencing the same data blocks you are fetching data to populate. This gives the impression that you already have data in your block. This doesn't make sense - could you explain what you are trying to accomplish?
Fifth, with respects to your code, the "Invalid Cursor" error (is this really the error you're getting?) is most likely caused by your explicit call to close the C1 cursor. As Andreas stated, when using a CURSOR FOR LOOP, the cursor is automatically opened, fetched and closed using this construct. There is no need to explicitly close the cursor, in fact - doing so will result in an invalid cursor error.
As to the "Record must be entered" error, is sounds like you have required items in your block or your QUOTA_MAST block is not synchronized with your QUOTA_DET block, so when you attempt to navigate to a different block or record within your the same block the navigation cursor can't move because you haven't entered data that is required.
Please tell us what you are attempting to do with this code so we can tell you if you are using the correct method.
Craig...

I ordered iphone 6 on 15 oct and delivery date will be from 3 nov-6nov. i'll travel on 7 nov morning, am worried to receive the order late.. can you please expedite the order?

i ordered iphone 6 on 15 oct and delivery date will be from 3 nov-6nov. i'll travel on 7 nov morning, am worried to receive the order late.. can you please expedite the order?

No. Because we are not Apple employees. In fact there is no one from Apple in this forum. Contact Apple directly via phone. Use the "Contact Us" link at the bottom of this page to find the phone listing.

Programmatically check the existence of objects in the system

Hi,
Is there a way to programmatically check the existence of objects? The idea is I'll accept a list of names of objects and their object types and then programmatically check their existence in the system?
Can you point me to a resource on how to do it?
Thanks in advance.
--Carl

Hi.
All custom objects (z, y) being referred to a program. May it be z or y table, data element, domain, sapscript form, function module/group.
The goal is actually to be able to transport a program from a source machine to a target machine. The objects being referred to from the program must also be transported, of course, for it to run properly. Thus, the need to check the objects' existence.
Thanks.
--Carl

Help-Task not found - Please check the Task Type, Name and Location are cor

HI all,
i have upgraded my owb from version 11gr1 to 11gr2. the installation is complete and all my mappings and objects are imported successfully.
i was able to execute the mappings using the sql code:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
by logging into sqlplus as the user in whose schema mappings are deployed.
hOwever, suddenly i am getting the error since sometime back - not sure what might have happened or what might have gone wrong. can someone please help me understand what might be wrong - how to decode this?
Here is my error:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
Role set.
Enter value for 1: WSODS
Call completed.
Enter value for 2: ODS_SCHEMA
Enter value for 3: PLSQLMAP
Enter value for 4: MAPPING_1
Enter value for 6: ","
Enter value for 5: ","
Stage 1: Decoding Parameters
| location_name=ODS_SCHEMA
| task_type=PLSQLMAP
| task_name=MAPPING_1
Stage 2: Opening Task
begin
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at "OWBSYS.WB_RT_API_EXEC", line 759
ORA-06512: at "OWBSYS.WB_RT_SCRIPT_UTIL", line 910
ORA-06512: at line 2When i execute this: i get the result as follows:
SELECT warehouse_object_id, store_id, object_type_id, object_type_name, object_name FROM owb$wb_rt_warehouse_objects
where object_name = 'MAPPING_1';
WAREHOUSE_OBJECT_ID STORE_ID OBJECT_TYPE_ID OBJECT_TYPE_NAME OBJECT_NAME
15947 15325 769 PLSQLMap MAPPING_1
1 rows selectedEdited by: Chaitanya on Mar 5, 2012 3:33 AM

Hi Chaitanya,
Did you get any resolution for this error? I'm facing the same error while trying to execute OWB mapping through this command.
Any help would be much appreciated. Thanks.
Regards,
Jagari

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Please check the order's object list (inconsistency SOBJ)

Similar Messages

Maybe you are looking for