Please fix the Metadata consistenct warning...

Hello Gurus,
I have come across the scenario where i have to add the Dummy Fact and dummy column for data densification between Fact and Dimension to see all possible result on answer set.
so I have created the Dummy Fact with Dummy column and done the Cartesian join between all dim with that Dummy fact with 1=1 in physical layer.
now in BMM I imported the Dummy fact and done same joins that I have with the other fact.
now when i create the criteria with dummy fact and orginal fact i m getting the consistency check error on report.
can some suggest me what to do in such case??
Thanking You....

Hey Veeravalli,
Dummy Fact is just created in physical layer with "select 1 as dummy from dual"....
and even the RPD is not showing any warning , error or best practise in consistancy check.
it's only when i pull the Dummy Column from Dummy Fact and any Fact column from regular fact , the error msg is showing in result.
Let me know if you need any further details..

Similar Messages

Please fix the metadata consistency warning..

Hello Gurus,
I have come across the scenario where i have to add the Dummy Fact and dummy column for data densification between Fact and Dimension to see all possible result on answer set.
so I have created the Dummy Fact with Dummy column and done the Cartesian join between all dim with that Dummy fact with 1=1 in physical layer.
now in BMM I imported the Dummy fact and done same joins that I have with the other fact.
now when i create the criteria with dummy fact and orginal fact i m getting the consistency check error on report.
can some suggest me what to do in such case??
Thanking You....

Hey Veeravalli,
Dummy Fact is just created in physical layer with "select 1 as dummy from dual"....
and even the RPD is not showing any warning , error or best practise in consistancy check.
it's only when i pull the Dummy Column from Dummy Fact and any Fact column from regular fact , the error msg is showing in result.
Let me know if you need any further details..

Unable to navigate requested Expression.Please fix the metadata consistency

Hello ,
I have created one criteria but when I m running the request i m geeting this error, State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: Dim - GL Account.Unit Code. Please fix the metadata consistency warnings. (HY000)
now when i checked the RPD for this and run the consistency check everything went fine.No warning MSG, No Error, No Best Best Practice.
now i checked the join condition in BMM for the dimension i m using in report and fact.
it's like Fact F is directly Joined with Dim A & Dim B.
now when i checked the Physical join it's like Fact F1 is joined with Dim Aand Dim C , Fact F2 is joined with Dim B and Dim C.
so there is no direct fact table join between Dim A and Dim B.
Fact F1 & Fact F2 goes as MTLS in BMM and creating Fact F, now when i got this error i went to Fact F in BMM and checked the LTS and level of granuality for DIM A and Dim B for Fact F1 and Fact F2 respectively. and it is also set as detail level. and in BMM LTS Fact F1 and Fact F2 is also join with inner join with Dim C. and Dim C's level of granuality is also set in Fact F1 and Fact F2 .
the Columns that i m taking criteria are coimng from Fact F, Dim A, Dim B.
can anyone suggest me what to do in this case????
Thanking you..

Hi Veer,
If I get you correctly,
In BMM
Fact F = (physical F1 + F2)
In Physical:
F1 -> Dim A, Dim C ; F2 -> Dim B,Dim C
So, in your BMM, please make sure that
1. Logical source for physical F1 has 'Detail for Dim A, Dim C' and 'Total for Dim B'
2. Logical source for physical F2 has 'Detail for Dim B , Dim C' and 'Total for Dim A'.
I think this should resolve the issue.
Hope this helps.
Thank you,
Dhar

Please fix the metadata consistency warnings error..

Hi Guys,
I am new to OBIEE, When i try to convert a chart view into Pivot table i get th ebelow error.How can i fix this issue?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 3058399872. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: FILTER(Budget Amount:[DAggr(Fact - Fins - Budget.Budget Amount by [ ] )] USING Dim - GL Account.Group Account Number = 'MKTG PAYROLL'). Please fix the metadata consistency warnings. (HY000)
SQL Issued: SELECT "Time"."Fiscal Quarter" saw_0, "Time"."Fiscal Period" saw_1, "Facts - Budget"."Total Operating Expenses" saw_2, "Facts - Actuals"."Total Operating Expenses" saw_3, "Facts - Budget"."Total Operating Expenses"-"Facts - Actuals"."Total Operating Expenses" saw_4, "Facts - Budget"."Total Operating Expenses YTD" saw_5, "Facts - Actuals"."Total Operating Expenses YTD" saw_6, "Facts - Budget"."Total Operating Expenses YTD"-"Facts - Actuals"."Total Operating Expenses YTD" saw_7, AGGREGATE(saw_2 BY ), AGGREGATE(saw_3 BY ), AGGREGATE(saw_4 BY ), AGGREGATE(saw_7 BY ), AGGREGATE(saw_2 BY saw_0), AGGREGATE(saw_3 BY saw_0), AGGREGATE(saw_4 BY saw_0), AGGREGATE(saw_7 BY saw_0) FROM "Financials - GL Budget and Expenses" WHERE ((Time."Fiscal Quarter" <= VALUEOF(NQ_SESSION."CURRENT_FSCL_QUARTER")) AND (Time."Fiscal Quarter" > VALUEOF(NQ_SESSION."FSCL_QTR_YEAR_AGO"))) AND (("WFS Segments".SEGMENT_NAME IN ('Aviation', 'Corporate', 'Land', 'Marine')) AND ("WFS Segments".ORG_NUM = VALUEOF(NQ_SESSION."OU_ORG"))) AND ("GL Segment1"."Hierarchy ID" = 'TTTTT') AND (Time.Status = 'Closed') ORDER BY saw_0, saw_1

As of my knowledge, you shouldn't get results set for any of views because of this error..!!
I see you are using 2 facts in the report.
And, dimensions you are using in this reports are confirmed dimensions to these 2 facts?
Are you mentioned proper content levels for each Fact LTSs?
Basic funda is: If fact and dimensions are joined directly, then you should mention the the level of granularity in Fact LTS. If not, you should mention total level of the dimensional hierarchy for the Fact LTS

Fix the metadata consistency

Hi
Could you pls find the error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: SCBT_MST.GROUP_CODE. Please fix the metadata consistency warnings. (HY000)
How can I fix this problem ???
When I do a Global consistency check via the administration tool, I getting 2 warnings.
How can i solve.
Thanks

State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: SCBT_MST.GROUP_CODE. Please fix the metadata consistency warnings. (HY000)check SCBT_MST.GROUP_CODE column.Check if it is properly mapped to somep physical column or not.
Can you close all your threads for which you are provided solution.you have not closed any of the thread.
Regards,
Sandeep
Edited by: 771488 on Dec 2, 2010 3:24 AM

Fix the metadata consistency warnings issue ...

Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: AR.AR_TP_ID. Please fix the metadata consistency warnings. (HY000)
Please help me to find the solution.

Hi,
I've got the following problem :
HY000 CODE : 10058 [NQODBC][SQLSTATE : HY000][NQSERROR:10058] a general error occurred. [NQSERROR:14026] Unable to navigate requested expression : Dim - Werkgever.WGVR Nr[]. Please fix the metadata consistency warnings (HY000)
How can I fix this problem ???
When I do a Global consistency check via the administration tool, I get no errors and no warnings. Nothing is changed in the Dim - Werkgever.
Who can help me ?
Kind Regards,
Else

ATTENTION: Please fix the above failed worker(s) so the manager can continu

i am applying a patch p11067286_R12.AP.B_R12_GENERIC.zip , i am facing the error
ATTENTION: Please fix the above failed worker(s) so the manager can continue
i restart all the workers with adctrl but same problem .
please need urgent help

user13376823 wrote:
Dear Hussein,
i am finding these errors in one log file
AD Worker warning:
Product Data File
/opt/oracle/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.Hi;
This is ignorable error, please check workerlog file last 50 lines, you should see something like below:
FAILED: file adorgcnv.pls on worker 1 for product ad username APPLSYS.
FAILED: file adorgcnv.pls on worker 2 for product ad username APPLSYS.
FAILED: file adorgcnv.pls on worker 3 for product ad username APPLSYS.
FAILED: file adorgcnv.pls on worker 4 for product ad username APPLSYS.
Done reading jobs from FND_INSTALL_PROCESSES table ...
Telling workers to read 'todo' restart file.
Done.
ATTENTION: All workers either have failed or are waiting:
FAILED: file adorgcnv.pls on worker 1.
FAILED: file adorgcnv.pls on worker 2.
FAILED: file adorgcnv.pls on worker 3.
FAILED: file adorgcnv.pls on worker 4.
ATTENTION: Please fix the above failed worker(s) so the manager can continue
Regard
Helios

Can somebody please fix the mess that is iBooks?

can somebody please fix the mess that is iBooks? lousy metadata, lousy usability, and now fails to read my library until I delete it from the filesystem then rebuild it. reboot, and it's screwed again. do you need someone to run the iBooks development program? please let me know.

For Apple to see your message, best repeat it at
http://www.apple.com/feedback

InDesign CS2 won't open: error msg states "Please install the MetaData plug-in and restart"

I'm unable to open my InDesign CS2 program, and am wondering if anyone has any suggestions for me. When I try to open it, I get an error message stating: "Cannot load Adobe InDesign CS2 because it requires MetaData. Please install the MetaData plug-in and restart Adobe InDesign."
It worked just fine last week - I have no idea what happened this week... (other than my 3-yr-old 'playing' with my computer...) I am able to open other CS2 programs like Illustrator and Photoshop. Any ideas for me??

Try trashing your preferences: Hold down Shift + Control + Option + Command immediately after launch. You'll get a dialog asking if you want to delete your preferences. If no dialog comes up you didn't do it fast enough.

RE: Firefox search box - manage search engines - get more search engines.. IT DOESN'T WORK , I now get 1000's of useless irrelevant results, PLEASE FIX THE SITES SEARCH NOW, IT'S COMPLETELY USELESS NOW

RE: Firefox search box -> manage search engines -> get more search engines..
IT DOESN'T WORK
I just want to add youtube + some others to the list of sites in the Firefox search box, I now get 1000's of useless irrelevant results, PLEASE FIX THE SITES SEARCH NOW, IT'S COMPLETELY USELESS NOW

Hi Kvoter,
What are you hoping for, firefox to display lists of sites you have visited or bookmarked ?
*''' it should be able to do that'''
* my firefox does that
I am only a fellow ordinary user of Firefox & XP, but maybe the problem is on your machine, rather than needing a fix from firefox. If you take a little time to read this you may be able to sort out the problems yourself.
I hope you do not mind me covering a few basics:
* the [[Search bar]] { <-- clickable link -- ] is designed to produce a lot or results, whereas
*the [[Location bar search|Location Bar]] is a lot more specific and may be [[Location bar autocomplete#w_controlling-behavior|set]] to include or exclude History & or [[bookmarks]]
If you are getting literally 1000s of totally unrelated results you may need to consider [[Is my Firefox problem a result of malware]]
Hope to hear that you have solved the problem, or a bit more detail about what still is a problem.
John

How do we find out what the conflicts are when the metadata conflict warning appears?

How do we find out what the conflicts are when the metadata conflict warning appears?

LR doesn't provide any way to do that. If you are really curious, you could use the free Exiftool to capture the metadata in the file before and after you do Metadata > Save Metadata To File, and then compare the before and after.
Also note that many people have reported spurious notifications that a file's metadata has changed.

Dear Sir/Madam, Adobe acrobat claims that there is an update. However the update process is very flaky and unreliable. Very poor service, with useless update prompts. System report is attached. Please fix the update, before advertising useless prompts

Dear Sir/Madam,
Adobe acrobat claims that there is an update.
However the update process is very flaky and unreliable.
Very poor service, with useless update prompts.
System report is attached.
Please fix the update, before advertising useless prompts for updates, for paid versions.
Thanks

Nothing is attached.
You should also be aware that there are a number of scams and malwares claiming fake updates.
Please post your report and tell us exactly what product and exact version you have.
And be aware you aren't talking to Adobe.

Excuse me apple I had the police nock on my door about an iPad that was located at our house and the owner lost the iPad in-between bowral nsw and Sydney can you please fix the app (Find My IPhone)

Excuse me apple I had the police nock on my door about an iPad that was located at our house and the owner lost the iPad in-between bowral nsw and Sydney can you please fix the app (Find My IPhone) so that person can find their iPad coz the police would of taken mine if I did not show proof of purchase

You are not communicating with Apple by posting here. Everyone here is just a fellow user and cannot fix anything.
The Find My iPad service may have indeed been accurate to the limits of the technology. Unless the iPad was a 3G unit, location is determined based on the nearest WiFi router which in your case could just happened to have been yours. The police may be the ones who need to "fix" their understanding of how the technology works and its limitations.
If you want to provide feedback to Apple on the matter, you can do so via their feedback pages:
http://www.apple.com/feedback/ipad.html
but to be of any good you'll have to provide them with more precise details.
Regards.

Hey Verizon / HTC / Google Please fix the caller ID problem, post 2.2 Froyo UPDATE.

Hey Verizon / HTC / Google Please fix the caller ID problem, post 2.2 Froyo UPDATE. This is a major Problem.

I have provided some steps below that may help with the Caller Id issue you are experiencing.
Try completing a soft reset on the device. A soft reset would be powering the device off and pulling out the battery. Once the battery is removed, place it back in and power the device back on.
Dial *228 and send. Once dialed, listen for the recording to prompt you for option 1 and select option 1. The phone should complete its programming within a minute.
Ensure you are using the area-code and 7 digit number format (ex. 9999951212)
Try removing the contact and re-adding it.

Please fix the "word substitution" feature!

The macros "%b" "%B" "%p" of word substitution is broken since 10.1.0. It is import for me. I have thousands of entries of it on my BOLD9900(about 30000 entries). Without them I can not input text efficently.
The macros "%b" "%B" "%p" just don't work. And if I use two of them, the second is treated as normal letters except a macro. For example, I set a Word Substitution entry like this:
myname %bqueshw
Then when I type "myname" twice, I get "queshw queshw". There is a space between the two "queshw". It should not be there.If I set a entry like this:
myname %b%bqueshw
Then I get "%bqueshw". The second "%b" is treated as normal letters now.
1. Please fix the broken macros.
2. Please activate the "word substitution" feature as default for the TextArea class. There are two class for inputting text , TextField and TextArea. But the TextArea is setted to inactivate the "word substitution" feature as default now.
3. Please open the APIs of "word substitution", and I can develop an app myself to import my entires from BOLD9900 to my Q10.
Please!!!

The macros "%b" "%B" "%p" of word substitution is broken since 10.1.0. It is import for me. I have thousands of entries of it on my BOLD9900(about 30000 entries). Without them I can not input text efficently.
The macros "%b" "%B" "%p" just don't work. And if I use two of them, the second is treated as normal letters except a macro. For example, I set a Word Substitution entry like this:
myname %bqueshw
Then when I type "myname" twice, I get "queshw queshw". There is a space between the two "queshw". It should not be there.If I set a entry like this:
myname %b%bqueshw
Then I get "%bqueshw". The second "%b" is treated as normal letters now.
1. Please fix the broken macros.
2. Please activate the "word substitution" feature as default for the TextArea class. There are two class for inputting text , TextField and TextArea. But the TextArea is setted to inactivate the "word substitution" feature as default now.
3. Please open the APIs of "word substitution", and I can develop an app myself to import my entires from BOLD9900 to my Q10.
Please!!!

Please fix the Metadata consistenct warning...

Similar Messages

Maybe you are looking for