Please help about OVM network configuration

I have ready RAC OVM templates and below is the instructions.
Can someone explain this to me?
I want to create a OVM server and OVM manager on virtualbox. But I couldnt und network configurations.
Following are the non-standard requirements for your OVM setup:
The VMs must be able to interact with the OVM server (Dom0) at IP address 192.0.2.1
The OPVM server (Dom0) must supply NTP and DNS services to the DB VMs
The OVM server must be configured with 3 virtual bridges (virbr0, virbr1, virbr2) to support the different Database Machine networks.
Here are some notes, assumptions and requirements associated with these VMs:
1. The public network interfaces on all the VMs occupy addresses in the 192.0.2.X range. The private storage network and cluster interconnect on all the VMs occupy addresses in the 192.168.1.X range.
2. All the VMs assume access to NTP and DNS services provided by servers at 192.0.2.1. One way to provide these services is to configure a bridged network interface on 192.0.2.1 under Dom0 and to configure NTP and DNS services on Dom0. Another way is to create an additional VM with a primary network interface on 192.0.2.1 which offers the required services.

986330 wrote:
I have 16gn memory on my laptop and I want to create an OVM server and OVM manager on virtual box. Is it possible?
Then I will import some OVM templates to that system.
No - not possible using Virtualbox - as noted, OVM and Virtualbox are different technologies and an OVM install will destroy the native OS.
I believe you are confusing technologies and terms. If I understand your needs, you are wanting to install Virtualbox on your OS, then create VMs using Virtualbox and/or import Virtualbox VM templates. Note that Virtualbox VM templates are different than OVM VM templates - the latter can only be installed on OVM Server.
1.1 Installing Oracle VM
HTH
Srini

Similar Messages

Urgent help required for network configuration

sir
i have a mixed scenario right now.
I have only three computer on home network.
1.vista accer travelmate 4720 laptop loaded with vista sp1 ultimate
2.normal pc : Core2 duo with XFX ATI REDION graphics card and this pc is loaded with OEL 5.3.x linux but this pc has 2 NICs(eth 0,eth 1) I have connected both with a switch and the switch is connected to a modem for internet.can I use one NIC as private and another NIC as public to access internet?
3. normal pc : P4 HT and its loaded with win xp sp2 having eth 0
how to set my network.
I have connected each NIC with a D-Link switch.And the D-Link switch is connected with DataOne Nokia Siemens network c2110 modem.
But problems are that
1) each time i can connect only one PC at a time.
2)OEL 5.3.x is not connected to the specified modem ever....by [adsl seup|http://forums.oracle.com/forums/thread.jspa?threadID=832112&tstart=0] command.should i configure it during installation?is there any easy shell scriot avilable to do this stuff?
please help as soon as you can.......
regards
Edited by: mango_boy on Sep 7, 2009 4:44 AM

ifconfig output:
eth1      Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:1 errors:0 dropped:0 overruns:0 frame:0
          TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:243 (243.0 b) TX bytes:9406 (9.1 KiB)
          Interrupt:16 Base address:0xec00
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:3779 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3779 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6124500 (5.8 MiB) TX bytes:6124500 (5.8 MiB)
virbr0    Link encap:Ethernet HWaddr 00:00:00:00:00:00
          inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b) TX bytes:8360 (8.1 KiB)
xenbr0    Link encap:Ethernet HWaddr 00:00:00:00:00:00
          UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)adsl-setup output
[root@localhost ~]# adsl-setup
Welcome to the ADSL client setup. First, I will run some checks on
your system to make sure the PPPoE client is installed properly...
LOGIN NAME
Enter your Login Name (default root): kris_9929
INTERFACE
Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): eth1
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no):
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: server
PASSWORD
Please enter your Password:
Please re-enter your Password:
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): yes
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
          for ensuring the security of your machine. You are STRONGLY
          recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
                for a LAN
Choose a type of firewall (0-2): 1
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):no
** Summary of what you entered **
Ethernet Interface: eth1
User name:          xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Activate-on-demand: No
DNS addresses:      Supplied by ISP's server
Firewalling:        STANDALONE
User Control:       yes
Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
(But first backing it up to /etc/ppp/chap-secrets.bak)
(But first backing it up to /etc/ppp/pap-secrets.bak)
Congratulations, it should be all set up!
Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status.Edited by: mango_boy on Sep 7, 2009 9:02 AM
added adsl setup output
Edited by: mango_boy on Sep 7, 2009 9:15 AM

Please Help: Error Message:"IP Configuration: IP Address Already In Use..."

I'm not sure where to post this, but I'm going to start here... I have been having this issue and its really beginning to scare me.
*_The Problem:_* I keep getting a message with a RED Exclamation Sign and its titled "IP Configuration" and says this: *123.456.0.1 already using DHCP 123.456.0.100*
I have been clicking okay, but finally one day got annoyed and called the mac people to get help and... they didnt help a bit.
So now I am trying to find help from others.... please help. give as many suggestion as possible and i'll continue to google for help. Thanks.
*So is someone else using my address?*
*Is someone able to see my screen and information and stuff?*
*Why is this happening?*
Please answer these questions if possible.

To really help, a description of how the network you use to get online is configured is needed. Are you using wireless? Are there other computers that use this network and if so, what operating system are they running? What sort of router and modem are you using? etc.
So is someone else using my address?
Either another machine is using your IP address, or something is wrong with the DHCP server.
Is someone able to see my screen and information and stuff?
Probably not.
Why is this happening?
My guess is that the firmware on your router needs to be updated.

Please help about Report Printer and PS tables-objects . ..

Hi everybody
I'm in trouble. I have a requirement in PS módule related with reports created by the Report Printer tool. I don't have any idea about these topics.
My requirement is to create a report (not with Report Printer) with the structure for projects, with all the structure Project-WBS-Network-Activity and with some values like Budget, Commit, Actual, Paid, etc.
The functional consultant only tells me about some reports created with Report Printer wich have the columns required, some report has the Budget, other one has the Commit, etc. For example, one report is the tcode S_ALR_87013532; i don't know if this transaction exists in all the SAP implementations or if it was created only for my company.
These reports only show two levels (Project-Network) so i i have to investigate:
1. How to get all the structure levels (project-WBS-network-activity)
2. How to 'translate' in code some value showed in a report created with Report Printer, i guess these values are created with formules and objects.
3. How to get the same values showed in these reports, but for the Networks and Activities.
I do not know anything about PS module and Report Printer and i really don't have any idea about how to make my development.
4. I think the functional consultant could be able to create the report himself with the Report Printer, but he tells me he does not manage this tool so good and he wants to send SAP mails with the reports, and he say the reports created with Report Printer can not send mails. Is this true ? and then, would be easier for me to learn Report Printer and create the report myself instead to develop it ?
Does somebody can help me ? Any idea ?
Please help !! I don't know even how to start with this.
Thanks in advance ..
Frank

Hi Frank,
here're some links:
-http://help.sap.com/saphelp_47x200/helpdata/en/ca/01993862b47c67e10000009b38f8cf/frameset.htm
-http://www.sapgenie.com/abap/tables_ps.htm
-Re: Project System Costs: budget/actual/commt/rem.plan/assd
Andreas

Please help about the limit request

how to connect the internet for the mobile set 3110 classic
because iam tried bye the contact provide service vodafone
also contained the internet service provided with it service
but massage comminig me tell me not contact or connection with internet
please help me

note:
i am reading the note book about set and working it but wihtout ability
what i do to connection with internet service

Someone please help about my bubble pointer

so when im randomly searching through text online(mostly using firefox), fast or slow, the pointer goes from looking normal, to zooming into a big ugly bold/bubbly fat looking pointer. its bizarre cause at first i really didnt noticed, but as i used mozilla more often, the problem occurred more frequently. honestly, its getting distracting to the point that i've stopped using firefox, and am using safari, which isnt bad, except for im used to firefox, and i like it.
I've come to another similar discussion posted her on apple discussions, and no helpful solutions, just alot of complaints. PLEASE HELP!!! does anyone evem know what im talking about?

What do i check? I downloaded Firefox, everything went fine and the settings are normal.

Please Help in Wireless Networking

This is my first post....I have three Macs and would want to share same iPhotos, Aperture and iTunes libraries on all Macs (2 MBPs, iMac). Can someone please help me what are the options?
Would Time Capsule work for this purpose?
I don't want to use same libraries on all three Macs at the same time but if uploaded some photos on MobileMe from iPhoto on one Mac then the other Mac should also have the same info.

.I have three Macs and would want to share same iPhotos, Aperture and iTunes libraries on all Macs (2 MBPs, iMac).
I don't want to use same libraries on all three Macs at the same time
These two statements seem a bit contradictory.
Options would be to locate the libraries on the Time Capsule, by copying them there from one machine and specifying that location in the preferences for each ap on each machine. All three machines would be able to access the same library. The big disadvantage there is obvious - when you take the MBPs out of the house, you can't access your data. So, I suspect this is not the option for you!
Alternatively, just share the libraries over the local network. There, you're not using the storage capability of Time Capsule, just the Wi-Fi network (thus, any Wi-Fi network would do). To set that up, for example in iTunes, select iTunes menu > Preferences > Sharing and check the boxes to Look for Shared Libraries and Share My Library... iPhoto has a similar setting, etc. If you can't see the other libraries, you may also need to allow access through the Firewall (if you have that active) on each machine - System Preferences > Security > Firewall tab.
Hope this helps...

Please help about encode password idm !!!!

Hello All,
I'm a newbie in IDM and in my work I have to encode password with CBC Algorithm before insert password in database (SQL server 2005).
So I have already coding CBC Algorithm but I don't know where I put my CBC encoding Algorithm for when users change password on IDM.
Please help me.
Thank you for advance.
waltt

I'm assuming you're not talking about storing the password that way in the IDM repository but rather a separate database resource.
I had a similar requirement with a different encryption algorithm and an Oracle database. I made my life a lot easier by having the database resource do the encryption. IDM will insert the password into the resource as plain text and, in my case, a trigger will catch it, call a stored procedure to change it from plain text to encrypted and then insert it. Since IDM never reads passwords from resources anyway the password was fully encrypted as stored in the resource and IDM never knows any better.
Technically speaking you could have created a rule or custom form to do the password encryption before IDM sends it over the wire but if you've got an encrypted channel to the database then you might take my approach and skip having IDM do it altogether.

Please help about HttpConnection

Hi all,
I am facing a typical problem about HttpConnection() for BlackBerry.But it is working fine in all other devices except BlackBerry.Bellow is the code:
public synchronized String getResponse(String sRequest)
String sReturn = null;
HttpConnection c = null;
java.io.InputStream is = null;
StringBuffer sb = new StringBuffer();
int ch;
int rc;
try {
sRequest=sRequest.trim();
c = (HttpConnection) Connector.open(sRequest);
c.setRequestProperty("User-Agent", System.getProperty("microedition.profiles"));
c.setRequestProperty("Content-Type", "application/octet-stream");
rc = c.getResponseCode();
if (rc != HttpConnection.HTTP_OK) {
return null;
is = c.openInputStream();
while ((ch = is.read()) != -1) {
sb.append((char)ch);
is.close();
c.close();
sReturn = sb.toString();
} catch(Exception e) {
System.out.println("URLCatch : "+sRequest);
sReturn = null;
return sReturn ;
}*"sRequest" is a simple URL String without any WAPGatewayIP & WAPGatewayAPN.*
Please tell me what is the wrong inside this connection method? Why this is not establishing the connection in BlackBerry? Should i have to change anything in this method for BlackBerry?I tried a lot but colud not solve.
Please help.
Thanks in advance

Hello Susanta_Mandal,
How you resolve the HttpConnection issue in balckberry handdheld ? i am facing the same probelm.
I am developing a mobile phone application(J2ME) for a BlackBerry handheld.In this application i use servlets for fetching Data,but when calling the URL it doesnt work and shows the IOException : Timed Out Error. I am using Vodafone sim card (Mumbai India) and it's GPRS is enabled. and I also crosscheck our application with other handsets like Nokia,Samsung etc. using same simcard and it's working fine.
I try to connect the URL in two ways.
1) Connector.open("http://161.117.177.166:8080/temp/chart;deviceside=true);
BlackBerry APN setting for Vodafone
Select Option -- > Advanced Options -> TCP/IP
APN Setting Enabled Checked
APN :portalnmms
Username for APN :Left Blank
Password for APN :Left Blank
Result Is :- IOException : Timed Out.
2) Send APN Parameter along with URL
Connector.open("http://161.117.177.166:8080/temp/chart;ConnectionTimeout=120000;deviceside=true;WapGatewayIP=010.010.001.100;WapGatewayPort=9401;WapGatewayAPN=portalnmms",Connector.READ_WRITE,true);
Result Is :- net.rim.device.cldc.io.waphttp.WAPIOException
Regard's
Prasanna K

Please send about the variant configuration

Hi
please send about the variant configuration

Steps for SD Variant Configuration
Some light on Variant Configuration in Detail.
The procedure is as follows:
Create a Material - KMAT type with Item category (002)
Create Charateristics in CT04 - Zbike, where in values mention the Color of the bile like Red, Blue etc
Create another characteristics in CT04 - ZPrice, where directly go the additional data tab and maintain the table SDCOM and field VKOND (ABAP Dictionary it will ask for)
Assign these two characteristics to a Class in CL01 - ZBikeclass ( Type 300) in characteristics tab page.
Then go to CU41 Configuration profile select the material and enter the description click on the class assignment ie assign Zbikclass.
Now go back to CT04 - enter Zbike -go to values- select Red- go to extras - Other Dependencies - Select Procedure enter in front 10 write - $self.ZPrice='Red' and save
Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
Now select Blue- go to extras - Other Dependencies - Editor - Select Procedure enter in front of 10 write - $self.ZPrice='Blue' and save
Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
Now go to VK11 - Enter VA00 (Condition)(For Std RVA001 Pricing Procedure) - enter variant Red and Blue give the rates accordingly and create the sales order.

Jsp newbie, please help about @include

I am new to JSP.
I have two jsp files, say , jsp1 and jsp2.
JSP2 is perfectly working. I want to display the result of jsp2 with the result of jsp1.
But I additionally want to supply a value from jsp1 to a variable in jsp2 before calling jsp2.
The result of jsp2 depends on the value supplied.
I couldn't figure out how to do this. A simple @include directive like
<%@ include file="jsp2.jsp" %> doesn't seem to be suitable here.
What options are available here? Please help.
Thank you.

Thank you friends for the suggestion. I have yet to try your suggestions.
Before that I came across another problem. Would someone help please?
Why the jsp fails when I include the same JSP page twice in another jsp page?
Of the following two jsp files, the upper one is OK, but the lower one complains that it cannot compile (org.apache.jasper.JasperException).
test1.jsp:
<html><head><title></title></head>
<body>
<table>
<tr><td><%@ include file="single.jsp" %></td></tr>
</table>
</body>
</html>
test2.jsp:
<html><head><title></title></head>
<body>
<table>
<tr>
<td><%@ include file="single.jsp" %></td>
<td><%@ include file="single.jsp" %></td>
</tr>
</table>
</body>
</html>
I want to populate the cells of an HTML table with the results from the same jsp file, by supplying different values to a variable in the jsp file so that its results will be different for each cell. Am I being to foolish here?
Thanks.

Please help about Custom View fo EditorKit

Thank You for reply
TextArea in Visual Studio .NET is somehow displayed like that.
- public class Test{
|
| + public Test(){
| | ....
| _ }
|
| + public int load(){
| | ......
| _ }
|
and if u press + symbol, method code is displayed.
thats why i want to customized EditorKit's Views
Please Help Me....
Thanks..

Thank You for reply
TextArea in Visual Studio .NET is somehow displayed like that.
- public class Test{
|
| + public Test(){
| | ....
| _ }
|
| + public int load(){
| | ......
| _ }
|
and if u press + symbol, method code is displayed.
thats why i want to customized EditorKit's Views
Please Help Me....
Thanks..

Could anyone please help about print check??

Dear expert,
We are testing the print process in OEM sample company but it did not print out and show that "The print document could not be started?" I have no clue how to solve this problem. The printer can print anything except this check, we are new to SAP and will go live very soon. Please help if you could. Thanks a lot.

Mickey usually the standard for processing a check in not to use the check for payment area, thats more for manual checks or viewing a check already posted.
My suggestion is to go to the outgoing payments area and select what you are going to pay using this area, post this..
then go to the document printing under Banking, change the document type to checks for payment
select the checks you want to print and enter your starting ck number...
send this to the printer of choice, wait until all checks print and then confirm
Hope this helps
ps also make sure you have the default layout for the check listed in Admin, set up, banks, house banks...scroll to the right and see the defaults to set up.
Edited by: Joanne Pencola on Sep 28, 2011 1:53 PM

Please Help!! Network Card Won't Detect Modem.. Advise about my options?

Thank you in advance for reading my post and for any help and advise..
I am on a friends computer because my Network Card went caput!.. now my computer can not detect my modem..
What happened?.. my surge protector did not protect my iMac during a thunder storm, and I have not been able to get online since.
I am almost sure now that my Network Card is the problem.. I have heard I will have to replace the entire board now! This could not have come at a worse time for me, so I am hoping and praying someone here will have a less expensive work around for me.
I am currently running a 700MHz G4 Flat Pannel with a DSL modem from Bell South. I was using my Ethernet input to get online, but, again, the modem can no longer be detected. This particular modem will not allow me to connect via USB either. If it did allow me to connect via USB, would that even work seeing how my network card is a wash?
Is there a way I can get another modem and use a USB or wireless something or the other to get my iMac back online without having to sell my arm and leg?
Sorry about the length of this post; I just want to make sure I cover as many bases as I can think of. Thank you again for any help; I really appreciate it! *april
iMac 15" Flat Pannel 700 MHz PowerPC G4 1GB SDRAM Mac OS X (10.3.9) i love my little bubble computer

BRAD!.. we are two ships sailing in the same mirky water; please somebody light a flair or something! =P
I always thought these things happened to 'other' people.. REALLY stinks to be us right now.
I have been doing some more reading.. my friend was nice enough to let me borrow his computer for a little bit. However, I still have not come across a definitive answer for a proven Internet access alternative.
So far, I have read about one other option that MAY work.. What I really need to know is.. with a corrupt Network Card, is it even POSSIBLE to get online by ANY other means? Or does having a corrupt Network Card mean that it destroys ANY other way to get online without having to replace the entire board? Is the Network Card what enables us to get online, or does the Network Card just allow us to connect to the Internet via Ethernet cable alone? I still have not found an answer to these questions.
That said, I mentioned reading about another Internet connection solution. This other option involves buying what is called a wireless router and a wireless AirPort card. I think they have to be installed inside the hard shell?? So with these parts and service, I believe we are still looking at a ballpark of US$200. I wish somebody could tell us, are there any other options?
On a side note, I have also learned that my particular 700 MHz iMac Flat Pannel will NOT take the wirelss AirPort EXTREME card; it will ONLY take the Original AirPort card, which, by the way, are more expensive and hard to find. Not too sure exactly what iMac Flat Pannel you have, Brad, but you should try to find out which one will work for your iMac. I don't know if I should trust eBay for used electronics, but it seems you can pick them up for a little less money than on any online websites. I saw some on a website called macofalltrades.com for about US$100.00; this website looks legit. I also tried Craigslist.ORG, and somebody was only selling an AirPort Extreme card, not the original... It may be worth looking on a near by big city local Craigslist though; make sure you click on the city nearest you.. The default craigslist.org is for San Francisco. I have heard a wireless router costs about US$40.00. However, I don't know exactly what a wireless router is or even what type I need to be looking for, what brand etc??
I need to know if I buy an AirPort card, will I also have to buy that AirPort Base thing as well?? All this information is becoming overwhelming. Could somebody please try to clairify? We would be eternally greatful! =)
Sorry about your computer, Brad; I know what you're going through. =(
iMac 15" Flat Pannel 700 MHz PowerPC G4 1GB SDRAM Mac OS X (10.3.9) i love my little bubble computer

Please help about firewire card

hi i have to buy one audiocard firewire for my PowerBook
I need to buy it soon before i go in holidays !
please council to me :
is better the Presonus Firebox , or the Focusrite Saffire ??
I use logic pro 7.1
is much apreciate help !!
grazie !!!

This is a uk leading magazine editor reply to me,
Hi Ken,
I just reviewed the Saffire unit and it seems very good for the price, particularly the mic preamps, which are based on the Focusrite Green series. If you can't afford RME or one of the other big interfaces, then Saffire seems like a good choice and the included plug-ins are pretty good too other than the guitar amp simulator, which is somewhat rudimentary.
And i've just place my order after reading all this review...
Saffire Reviews
Play - UK Magazine - July 2005
"Combining the I/O control in SaffireControl with the kind of pre-amp quality you'd expect from Focusrite, and the awesome tracking and monitoring plugs that require zero CPU from your computer, means it's true - you really can simulate a professional recording session in the comforts of your own bedroom, and all for under £350. For me, that's not just a giant step, that's the moon and back!"
Read the full review
"The package also offers a flexible software application called 'SaffireControl', which enables you to perform a number of nifty functions."
"One thing I liked a lot was Focusrite's obvious desire to make Saffire appeal both to seasoned pros and newbies alike. When using these plug-ins, you can toggle between user-friendly templates for vocals, guitars, pianos and other instruments, or open up the plug-in and get into more specific tweaks with conventional controls."
"Focusrite have even made this simple with a 'float' button that keeps the control surface open at all times."
"It gets better, as monitor reverb can also be set up to aidthe recording process. Again, this is an adjustable control that allows you to set an amount (dry/wet mix), a room size, the diffusion level and a clever tone control, which filters various. The single dial is capable of producing low-pass, hi-pass and band-pass tone, so finding a useful setting shouldn't be a problem."
"Using this system, and the handy labels on the outputs themselves, Saffire is capable of producing surround mixes in both 5.1 and 7.1. In fact, you could make almost any system you wanted, including direct feeds for stereo monitors and a sub bass unit for example."
"There's a lot to like about this box. It sounds great, does what it's supposed to and yet has plenty of tricks up its sleeve. SaffireControl is focusrite's ace in the pack here, and is designed to appeal to both the novice and the experiences user."
"I suspect Saffire will do very well. Despite looking like a departure from their existing range, Focusrite have actually drawn from their strengths here by combining their M-Box experience with years of proud dynamics processing history, and it's a winning combination."
Build - 8/10
Value for Money - 9/10
Ease of Use - 8/10
Versatility - 9/10
Quality of results - 9/10
"Sounds great and will appeal to complete novices and cynical pros alike."
Jono Buchanan, Future Music, September 2005
Saffire redefines the use of FireWire interfacing, providing a unique DSP input processing system, software mixing and integral VST/Audio Unit effects. Most importantly, however, despite adding considerably more functionality than the Mbox, the Saffires retail price still falls under the £350 mark its a lot of interface for a relatively small outlay.
Pleasingly, the unit seems to have been put together with an informed understanding of the demands placed on an audio interface during recording:
By having eight outputs, the Saffire is clearly equipped for surround applications; however, by having four separate stereo outs, Saffire also enables you to configure separate headphone and monitor mixes (something impossible to achieve with basic, two-output audio interfaces).
SaffireControl, however, takes this idea one stage further by using the software to access Saffires DSP chip thereby opening up the potential of processing a signal as it goes to tape.
The plug-ins themselves soun

Please help about OVM network configuration

Similar Messages

Maybe you are looking for