Please help in Matrix...Z-A

I am getting the Month wise sorting order also.
ItemCode Jan Feb -- Dec YEARTOTAL
001 200 300 400 900
002 400 200 200 800
003 100 500 600 1200
I am calculating 12 months total in YEARTOTAL COLUMN and I want this YEARTOTAL COLUMN to be in Decending to check the total sale Qty from Maximum to Minimum.
Please help me to sort on YEARTOTAL COLUMN decending order.
Thanks and regards,
Syed Muzzammil

Hi Syed,
I am assuming that you re calculating the "YearTotal" sales in a summary column inside your report's data model. If that is the case, then reports does not know the values of this column before creating the report. It calculates this value in every row. So it will not be able to sort by this column, because for sorting you need to know all the values beforehand.
What you can do is - in Reports data model, you introduce a Formula Column inside the same Group as Item_Code. In this Formula Column, use PL/SQL to calculate the value of YearTotal sales (just total sales for one product over all months). Then go to the Property Inspector of this column, and set Break Order > Descending. This should do to trick.
Make sure that you drag this column in group to be at the top (above Item_Code).
For more information, see Builder help on "Break Order property".
Navneet.

Similar Messages

  • URGENT (PLEASE HELP) AC Analysis Matrix Singular Error

    Hi all (sorry to post on a new thread again Yao) , my project is due tomorrow at 9 am. Therefore please please please help me on this circuit.
    I can't perfom AC analysis on the circuit for that there is a matrix singular error. May anyone please tell me what is wrong ??
    Please! Thank you!!!
    Attachments:
    489project2.ms10 ‏105 KB

    OK, I added a current probe to measure the current thru the multimeter (You could also use a current - controlled voltage source) but no matter what I look at I can't get an ac analysis to give a non-zero gain.  I simplified the circuit some more and set the option for the node numbers to show. There is something fundamentally wrong in the area of the ac voltage source V1 and the voltage controlled capacitor. As long as the voltage source is in parallel with the capacitor, the capacitor current will be driven only by the voltage source. The capacitor voltage will always be equal to the voltage source V1. The current source A4 doesn't accomplish anything - its current will just be sunk into the voltage source V1. I thought maybe you really meant to measure the voltage controlled capacitor current and feed that back into one of the inputs of A4 but I can't really tell what you are trying to accomplish. Maybe this will give you some ideas.
    Attachments:
    489project2r1.ms10 ‏82 KB

  • Please help : How to print a matrix from the console...

    Hi..
    Please help:
    How to print a matrix on the console , but i want to take all the input from the console.. like...
    if the matrix is of size...
    mxn
    where
    m : row
    n : column
    and the all the elements of the matrix from the console it self... .
    Please help...

    Thanks...
    I am able to print the elements of the array but i am not able to assign those values to the array ....
    How to do that...
    I just did a little change in my code...
    import java.util.Scanner;
    public class CreatingAMatrix {
        public static void main(String[] args) {
         // TODO Auto-generated method stub
         System.out.print("Enter the number of rows: ");
         Scanner scanner1 = new Scanner(System.in);
         int m = scanner1.nextInt();
         System.out.print("Enter the number of coulmns:");
         Scanner scanner2 = new Scanner(System.in);
         int n = scanner2.nextInt();
         System.out.println("The size of the matrix is : " +m+" x "+n );
         int[][] a = new int[100][100];
         for(int i=0;i<=m;i++)
             for(int j =0; j <= n; j++)
              Scanner scanner3 = new Scanner(System.in);
              int o = scanner3.nextInt();
             System.out.println();
         for(int i=0;i<=m;i++)
             for(int j =0; j <= n; j++)
              System.out.print(a[i][j] + "\t");
             System.out.println();
    }I am getting an output as this
    output:
    Enter the number of rows: 2
    Enter the number of coulmns:1
    The size of the matrix is : 2 x 1
    1
    2
    1
    2
    3
    5
    0     0     
    0     0     
    0     0     
    how should i assig those input values to my array..
    Please help

  • Matrix of Radio buttons on Datagrid please help!

    Hi,
        Anyone help me walk through this, I have a Datagrid object which uses radio button as item renderer.
    To be more specific this is a matrix of radio buttons on datagrid. The datagid columns are dynamically generated depending on the number of items i have in my database record, (e.g could be 10, 20, and so on...). The rendering of items goes well. Now my question would be how am I able to group the radio button in my datagrid "per column or per row"? since it appears to me that groupName is not working if applied on the item renderer. I also set the a radio button group on the item renderer parent document but it sets all the button to only one group.
    Any hints, and ideas how am I able to accomplish this? Please help this novice trying to wrap himself in flex.
    Thanks!
    Best Regards

    try this.
    <mx:RadioButtonGroup id="groupA"/>
    <mx:RadioButtonGroup id="groupB"/>
    <mx:DataGrid>
         <mx:dataProvider>
              <mx:Object Group="A" Price="11.99" groupName="groupA"/>
              <mx:Object Group="B" Price="11.99"  groupName="groupB"/>
              <mx:Object Group="A" Price="11.99" groupName="groupA"/>
              <mx:Object Group="B" Price="11.99"  groupName="groupB"/>
              <mx:Object Group="A" Price="11.99" groupName="groupA"/>
              <mx:Object Group="B" Price="11.99"  groupName="groupB"/>
              <mx:Object Group="A" Price="11.99" groupName="groupA"/>
              <mx:Object Group="B" Price="11.99"  groupName="groupB"/>
         </mx:dataProvider>
         <mx:columns>
              <mx:DataGridColumn dataField="Group">
                   <mx:itemRenderer>
                        <mx:Component>
                             <mx:RadioButton groupName="{data.groupName}" label="{data.Group}"/>
                        </mx:Component>
                   </mx:itemRenderer>
              </mx:DataGridColumn>
              <mx:DataGridColumn dataField="Price"/>
         </mx:columns>
    </mx:DataGrid>
    You may want to set the groupName dynamically in your data provider.

  • Cannot log into AD on Mountain Lion. Please help! I got the logs

    My company has been experiencing this problem ever since Mountain Lion released.
    The problem is, we cannot log into AD on all of our MAC who currently runs Mountain Lion. We, however, can log into AD fine with Lion and Snow Leopard just fine. We only use AD, we don't use Open Directory or have any Apple server.
    I have gather some logs using the SSH. Please help me view the logs and let me know what's going on if possible.
    Here are the steps that I performed before capture these logs.
    I format the hard drive and installed a new OS X 10.8.2 on the hard drive using the Recovery Mode (Hold down option Key while boot).
    I created a new computer name call ittest-mac3 in AD and assigned to proper OU. I changed the computer name under System Preferences ==> Sharing to "ittest-mac3".
       3.  I bind this Macbook Pro to our Active Directory via xyz.com. The bind was successful. I enabled "Create mobile account at login", "Required confirmation before creating a mobile account", " Force local home directory on start up disk", " Use UNC path from active directory to derive network home location", "Default user shell: /bin/bash/. Network protocol to be used: smb:
    After I reboot the Mac client, I was unable to log into it using our regular AD user account (consider all of our employees has regular account).
    I created 2 test accounts for Mac on Active Directory, they are "mac test" and "mac test 2".
    With "mac test" account, I configured everything the same as our regular account in AD. Which I was not able to log into the Mac client using this account.
    With “mac test 2” account, I configured everything the same as our regular account in AD EXCEPT for UNIX Attributes. I was successfully logged into the Mac client using this user account.
    So the problem is ... set the Unix Attributes for NIS domain on the AD account prevent everyone of us in our company to log into AD on any client that have Mountain Lion OSX installed.
    Here are the logs:
    Log1. This logs showed successful when log into AD on a Mountain Lion OSX using an AD account that don't have UNIX attributes setting configure.
    login as: administrator
    Using keyboard-interactive authentication.
    Password:
    Last login: Mon Dec 17 08:43:38 2012
    ittest-mac3:~ administrator$ sudo su -
    WARNING: Improper use of the sudo command could lead to data loss
    or the deletion of important system files. Please double-check your
    typing when using sudo. Type "man sudo" for more information.
    To proceed, enter your password, or type Ctrl-C to abort.
    Password:
    ittest-mac3:~ root# cd /var/log
    ittest-mac3:log root# tail -f system.log
    Dec 17 09:02:19 ittest-mac3.local SecurityAgent[650]: *** WARNING: -[NSImage com                                                                            
    positeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Pleas                                                                             
    e use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:02:50 ittest-mac3.local sshd[659]: Accepted keyboard-interactive/pam f                                                                            
    or administrator from 10.10.202.63 port 50738 ssh2
    Dec 17 09:02:50 ittest-mac3.local sshd[659]: USER_PROCESS: 665 ttys000
    Dec 17 09:04:59 ittest-mac3.local sudo[673]: administrator : TTY=ttys000 ; PWD=/                                                                             
    Users/administrator ; USER=root ; COMMAND=/usr/bin/su -
    Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_authenticate(): authenticat                                                                             
    ion succeeded
    Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_acct_mgmt(): The group chec                                                                             
    k succeeded.
    Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_acct_mgmt(): OpenDirectory                                                                              
    - Membership cache TTL set to 1800.
    Dec 17 09:04:59 ittest-mac3.local su[674]: in od_record_check_pwpolicy(): retval                                                                             
    : 0
    Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_open_session(): No session                                                                              
    type specified.
    Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_open_session(): Going to sw                                                                            
    itch to (root) 0's Background session
    Dec 17 09:07:19 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'config.modify.com.apple.familycontrols.override' by client
    '/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] for authorization created by
    '/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] (3,0)
    Dec 17 09:07:19 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'config.modify.com.apple.familycontrols.loginwindow.override' by
    client '/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resource s/parentalcontrolsd' [679] for authorization created by
    '/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] (3,0)
    Dec 17 09:07:19 ittest-mac3.local SecurityAgent[650]: User info context values set for mtest2
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got user: mtest2
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got ruser: (null)
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got service: authorization
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Context initialised
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Stashing kcm credentials in enviroment for kcminit: [email protected]
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in od_record_check_pwpolicy(): retval: 0
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in od_record_attribute_create_cfstring(): returned 2 attributes for
    dsAttrTypeStandard:AuthenticationAuthority
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Establishing credentials
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got user: mtest2
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Context initialised
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got euid, egid: 0 0
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done getpwnam()
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done setegid() & seteuid()
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: init credential cache
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: storing credential for: [email protected]
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got cache_name: API:164370296:1
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Environment done: KRB5CCNAME=164370296:1
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Cache closed
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup2
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup3
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done seteuid() & setegid()
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup4
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: ntlm
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in ac_complete(): ac_complete returned: 0 for 164370296
    Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: ntlm done, used domain: PROS1
    Dec 17 09:07:19 ittest-mac3.local SecurityAgent[650]: Login Window login proceeding
    Dec 17 09:07:19 ittest-mac3.local ManagedClient[644]: ODUGetMCXRecordWithCache(): [ODRecord setNodeCredentialsWithRecordType:"dsRecTypeStandard:Users"
    authenticationType:kDSStdAuthNodeNativeRetainCredential authenticationItems:["mtest2", password]]) == 2100 (Connection failed to the directory server.) [This
    error is ignored and is only being flagged for notification]
    Dec 17 09:07:20 ittest-mac3 kernel[0]: Sandbox: kcm(681) deny mach-lookup com.apple.networkd
    Dec 17 09:07:20 ittest-mac3.local MCXCompositor[690]: CFPreferences: user home directory for user kCFPreferencesCurrentUser at  is unavailable. User domains
    will be volatile.
    Dec 17 09:07:20 ittest-mac3.local UserNotificationCenter[696]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It
    should not be used in new applications. Use convertRectToBacking: instead.
    Dec 17 09:07:24 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
    '/System/Library/CoreServices/ManagedClient.app' [644] for authorization created by '/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
    Dec 17 09:07:24 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
    '/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
    '/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
    Dec 17 09:07:24 ittest-mac3.local ManagedClient[644]: ODUMakeMobileMCXRecord: updating record from kDSNAttrOriginalHomeDirectory =
    <home_dir><url>smb://pros-fsvr2/home/mtest2</url><path>/</path></home_dir>
    Dec 17 09:07:24 ittest-mac3.local ManagedClient[644]: ODUMakeMobileMCXRecord: updating record to   kDSNAttrOriginalHomeDirectory =
    <home_dir><url>smb://pros-fsvr2/home/</url><path>mtest2/</path></home_dir>
    Dec 17 09:07:25 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
    '/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
    '/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
    Dec 17 09:07:26 --- last message repeated 1 time ---
    Dec 17 09:07:26 ittest-mac3 com.apple.launchd[1] (com.apple.launchd.peruser.164370296): Throttling respawn: Will start in 4 seconds
    Dec 17 09:07:26 ittest-mac3.local writeconfig[697]: Unable to talk to lsboxd
    Dec 17 09:07:26 ittest-mac3.local writeconfig[697]: SFL(697): AddNewItemWithProperties_rpc returned 5
    Dec 17 09:07:26 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
    '/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
    '/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
    Dec 17 09:07:30 ittest-mac3.local distnoted[721]: # distnote server agent  absolute time: 3817.482079135   civil time: Mon Dec 17 09:07:30 2012   pid: 721
    uid: 164370296  root: no
    Dec 17 09:07:30 ittest-mac3.local distnoted[721]: Bug: 12C60: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
    Dec 17 09:07:30 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.login.console' by client
    '/System/Library/CoreServices/loginwindow.app' [641] for authorization created by '/System/Library/CoreServices/loginwindow.app' [641] (100003,0)
    Dec 17 09:07:30 ittest-mac3.local loginwindow[641]: Login Window - Returned from Security Agent
    Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort,
    err: 1102
    Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: USER_PROCESS: 641 console
    Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.gamed): Ignored this key: UserName
    Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.gamed): Ignored this key: GroupName
    Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find:
    com.apple.ReportCrash.Self
    Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: Connection with distnoted server was invalidated
    Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
    '/System/Library/CoreServices/UserAccountUpdater' [727] for authorization created by '/System/Library/CoreServices/UserAccountUpdater' [727] (2,0)
    Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
    '/usr/libexec/launchdadd' [730] for authorization created by '/System/Library/CoreServices/UserAccountUpdater' [727] (100002,0)
    Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Session 100015 created
    Dec 17 09:07:31 ittest-mac3.local MRT[731]: MRT finished scan. Malware files were not found.
    Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
    '/usr/libexec/MRT' [731] for authorization created by '/usr/libexec/MRT' [731] (2,0)
    Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
    '/usr/libexec/launchdadd' [730] for authorization created by '/usr/libexec/MRT' [731] (100002,0)
    Dec 17 09:07:31 --- last message repeated 1 time ---
    Dec 17 09:07:31 ittest-mac3.local blued[68]: kBTXPCUpdateUserPreferences gConsoleUserUID = 164370296
    Dec 17 09:07:31 ittest-mac3.local locationd[738]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this
    compatiblity mapping behavior in the near future.
    Dec 17 09:07:31 ittest-mac3.local locationd[738]: NOTICE,Location icon should now be in state 0
    Dec 17 09:07:31 ittest-mac3.local UserEventAgent[725]: cannot find fw daemon port 1102
    Dec 17 09:07:34 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.login.done' by client
    '/System/Library/CoreServices/loginwindow.app' [641] for authorization created by '/System/Library/CoreServices/loginwindow.app' [641] (100002,0)
    Dec 17 09:07:36 ittest-mac3.local CalendarAgent[753]: Could not find Meta Data for persistent Store
    Dec 17 09:07:37 ittest-mac3.local WindowServer[76]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    Dec 17 09:07:37 ittest-mac3.local WindowServer[76]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
    1.000000, 1.000000)
    Dec 17 09:07:37 ittest-mac3.local genatsdb[764]: ########## genatsdb Sandboxed. ##########
    Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: CGSCopyWindowShape: pid (763) passed NULL window
    Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: could not update menu bar region, 1000
    Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: CGSSetWindowTransformAtPlacement: Singular matrix [0.000 0.000 0.000 0.000]
    Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: *** WARNING: Method convertRectToBase: in class NSView is deprecated on 10.7 and later. It should not
    be used in new applications.
    Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: *** WARNING: Method convertRectFromBase: in class NSView is deprecated on 10.7 and later. It should
    not be used in new applications.
    Dec 17 09:07:38 ittest-mac3.local SystemUIServer[763]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
    Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:07:38 ittest-mac3.local SystemUIServer[763]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
    later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:07:39 ittest-mac3.local genatsdb[764]: *GENATSDB* FontObjects generated = 392
    Dec 17 09:07:53 ittest-mac3 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    Dec 17 09:07:53 ittest-mac3 kernel[0]: macx_swapoff SUCCESS
    Dec 17 09:07:59 ittest-mac3.local Setup Assistant[751]: INFO: MMAccountMgr_Private: finishedSetup called.
    Dec 17 09:07:59 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 39931
    Dec 17 09:07:59 --- last message repeated 4 times ---
    Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.afpstat-qfa[793]): Job failed to exec(3). Setting up event to tell us when to
    try again: 2: No such file or directory
    Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.afpstat-qfa[793]): Job failed to exec(3) for weird reason: 2
    Dec 17 09:07:59 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 39931
    Dec 17 09:07:59 --- last message repeated 4 times ---
    Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mrt.uiagent[783]): Exited with code: 255
    Dec 17 09:07:59 ittest-mac3.local NetworkBrowserAgent[796]: Starting NetworkBrowserAgent
    Dec 17 09:07:59 ittest-mac3.local imagent[786]: [Warning] Setting up a new messages database.
    Dec 17 09:07:59 ittest-mac3.local Finder[775]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be
    used in new applications. Use convertRectToBacking: instead.
    Dec 17 09:07:59 ittest-mac3.local Finder[775]: *** WARNING: Method userSpaceScaleFactor in class NSView is deprecated on 10.7 and later. It should not be
    used in new applications. Use convertRectToBacking: instead.
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
    Dec 17 09:09:09 --- last message repeated 4 times ---
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: dict count after removing entry for window 0xfe is 0
    Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
    notification kLSNotifyApplicationDeath to notificationID=243
    Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Could not terminate job: 3: No
    such process
    Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Using fallback option to
    terminate job...
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
    Dec 17 09:09:09 --- last message repeated 4 times ---
    Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] ([0x0-0x44044].com.apple.AppleSpell[767]): Exited: Terminated: 15
    Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.quicklook[803]): Exited: Killed: 9
    Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification
    kLSNotifyApplicationDeath to notificationID=272
    Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[813]): Exited: Killed: 9
    Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: DEAD_PROCESS: 641 console
    Dec 17 09:09:09 ittest-mac3.local migCacheCleanup[736]: Cache cleanup: cleanup for user 164370296 took 0.07 seconds
    Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
    notification kLSNotifyApplicationDeath to notificationID=260
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
    Dec 17 09:09:09 --- last message repeated 4 times ---
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXRestartSessionWorkspace: session workspace exited for session 257 (on console)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (1 references)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (0 references)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: loginwindow connection closed; closing server.
    Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: CGSFlushWindowContentRegion: Invalid connection
    Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSGetNextEventRecord (Inline) connection 0x201b, 16384 bytes
    Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSShutdownServerConnections: Detaching application from window server
    Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    Dec 17 09:09:09 ittest-mac3.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=15883 Died
    Dec 17 09:09:09 ittest-mac3.local loginwindow[826]: Login Window Application Started
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Server is starting up
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 released (1 references)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: init_page_flip: page flip mode is on
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: mux_initialize: Mode is dynamic
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor enabled for tile size [256 x 256]
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXGLInitMipMap: mip map mode is on
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: WSMachineUsesNewStyleMirroring: true
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
            Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
            UUID 0x000006100000a00f00000000042803c0
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003f
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003e
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003d
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x4 for display 0x042803c0
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x5 for display 0x003f003f
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x6 for display 0x003f003e
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x7 for display 0x003f003d
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
            Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
            UUID 0x000006100000a00f00000000042803c0
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (2464, 0)[1 x 1], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003f
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003e
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003d
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXPerformInitialDisplayConfiguration
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x042803c0: MappedDisplay Unit 0; Alias(4, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions
    13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 2
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
    0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
    0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
    0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXMuxBoot: Boot normal
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x0000494b, unit 0, caps QEX|
    QGL|MIPMAP, vram 1024 MB
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384,
    viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004833, unit 4, caps QEX|
    QGL|MIPMAP, vram 580 MB
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384,
    viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Created shield window 0x8 for display 0x042803c0
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
    1.000000, 1.000000)
    Dec 17 09:09:10 ittest-mac3.local launchctl[829]: com.apple.findmymacmessenger: Already loaded
    Dec 17 09:09:10 ittest-mac3.local com.apple.SecurityServer[15]: Session 100018 created
    Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSShutdownServerConnections: Detaching application from window server
    Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
    Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320 
    isBackBuffered: 1 numComp: 3 numDisp: 3
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
    Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
    later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
    -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
    Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
    1.000000, 1.000000)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
    Dec 17 09:09:09 --- last message repeated 4 times ---
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: dict count after removing entry for window 0xfe is 0
    Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
    notification kLSNotifyApplicationDeath to notificationID=243
    Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Could not terminate job: 3: No
    such process
    Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Using fallback option to
    terminate job...
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
    Dec 17 09:09:09 --- last message repeated 4 times ---
    Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] ([0x0-0x44044].com.apple.AppleSpell[767]): Exited: Terminated: 15
    Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.quicklook[803]): Exited: Killed: 9
    Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification
    kLSNotifyApplicationDeath to notificationID=272
    Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[813]): Exited: Killed: 9
    Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: DEAD_PROCESS: 641 console
    Dec 17 09:09:09 ittest-mac3.local migCacheCleanup[736]: Cache cleanup: cleanup for user 164370296 took 0.07 seconds
    Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
    notification kLSNotifyApplicationDeath to notificationID=260
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
    Dec 17 09:09:09 --- last message repeated 4 times ---
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXRestartSessionWorkspace: session workspace exited for session 257 (on console)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (1 references)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (0 references)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: loginwindow connection closed; closing server.
    Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: CGSFlushWindowContentRegion: Invalid connection
    Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSGetNextEventRecord (Inline) connection 0x201b, 16384 bytes
    Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSShutdownServerConnections: Detaching application from window server
    Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    Dec 17 09:09:09 ittest-mac3.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=15883 Died
    Dec 17 09:09:09 ittest-mac3.local loginwindow[826]: Login Window Application Started
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Server is starting up
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 released (1 references)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: init_page_flip: page flip mode is on
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: mux_initialize: Mode is dynamic
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor enabled for tile size [256 x 256]
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXGLInitMipMap: mip map mode is on
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: WSMachineUsesNewStyleMirroring: true
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
            Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
            UUID 0x000006100000a00f00000000042803c0
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003f
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003e
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003d
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x4 for display 0x042803c0
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x5 for display 0x003f003f
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x6 for display 0x003f003e
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x7 for display 0x003f003d
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
            Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
            UUID 0x000006100000a00f00000000042803c0
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (2464, 0)[1 x 1], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003f
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003e
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
            off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
            UUID 0xffffffffffffffffffffffff003f003d
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXPerformInitialDisplayConfiguration
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x042803c0: MappedDisplay Unit 0; Alias(4, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions
    13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 2
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
    0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
    0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
    0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXMuxBoot: Boot normal
    Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x0000494b, unit 0, caps QEX|
    QGL|MIPMAP, vram 1024 MB
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384,
    viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004833, unit 4, caps QEX|
    QGL|MIPMAP, vram 580 MB
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384,
    viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Created shield window 0x8 for display 0x042803c0
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
    1.000000, 1.000000)
    Dec 17 09:09:10 ittest-mac3.local launchctl[829]: com.apple.findmymacmessenger: Already loaded
    Dec 17 09:09:10 ittest-mac3.local com.apple.SecurityServer[15]: Session 100018 created
    Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSShutdownServerConnections: Detaching application from window server
    Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
    Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320 
    isBackBuffered: 1 numComp: 3 numDisp: 3
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
    Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
    later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
    -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
    Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
    1.000000, 1.000000)
    Log2: This log showed was captured when we logged into a test account that have Unix Attributes configure just like our regular user's account.
    ^C
    ittest-mac3:log root# tail -f system.log
    Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
    Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
    Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320 
    isBackBuffered: 1 numComp: 3 numDisp: 3
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
    Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
    later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
    -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
    Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
    1.000000, 1.000000)
    Dec 17 09:09:41 --- last message repeated 1 time ---
    Dec 17 09:10:13 ittest-mac3.local SecurityAgent[836]: User info context values set for tle
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got user: mtest
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got ruser: (null)
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got service: authorization
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Context initialised
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Stashing kcm credentials in enviroment for kcminit: [email protected]
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in od_record_check_pwpolicy(): retval: 0
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in od_record_attribute_create_cfstring(): returned 2 attributes for
    dsAttrTypeStandard:AuthenticationAuthority
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Establishing credentials
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got user: mtest
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Context initialised
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got euid, egid: 0 0
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done getpwnam()
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done setegid() & seteuid()
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: init credential cache
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: storing credential for: [email protected]
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got cache_name: API:2137600189:2
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Environment done: KRB5CCNAME=2137600189:2
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Cache closed
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup2
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup3
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done seteuid() & setegid()
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup4
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: ntlm
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in ac_complete(): ac_complete returned: 0 for 2137600189
    Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: ntlm done, used domain: PROS1
    Dec 17 09:10:13 ittest-mac3.local SecurityAgent[836]: Login Window login proceeding
    Dec 17 09:10:13 ittest-mac3.local ManagedClient[830]: ODUGetMCXRecordWithCache(): [ODRecord setNodeCredentialsWithRecordType:"dsRecTypeStandard:Users"
    authenticationType:kDSStdAuthNodeNativeRetainCredential authenticationItems:["mtest", password]]) == 2100 (Connection failed to the directory server.) [This
    error is ignored and is only being flagged for notification]
    Dec 17 09:10:13 ittest-mac3 com.apple.launchd[1] (com.apple.launchd.peruser.4294967295[846]): getpwuid("4294967295") failed
    Dec 17 09:10:13 ittest-mac3 com.apple.launch

    -Reece,
    We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
    So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
    The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this?

  • Hello Technical Experts... please help me on this error :- 'Tax data is missing ArrayOffset 12, srcLineNum 0, srcGroupNum -1'.

    In my A/P credit memo screen i have incorporated a column for adding reference to closed A/P Invoices. upon filling this field with DocNum of APInvoice certain other fields also get filled from an SQL query. One among them is the TaxCode. My problem is that the TaxAmount(LC) field at the last row of the matrix is not filled with the appropriate value, it remains 0. On trying to add the document or pressing the link button on the TaxAmount field a status bar error message pops up showing, 'Tax data is missing ArrayOffset 12, srcLineNum 0, srcGroupNum -1'.
    Please Help me solve this issue.
    Thanks in Advance
    Rajeev

    Hi,
    Please check SAP note:
    1860926 - When updating a Purchase Order via DI API "-12109 Tax data
    is missing..." Error occurs
    Thanks & Regards,
    Nagarajan

  • ZOMG PLEASE HELP! - ColorMatrixFilter - How to set a SPECIFIC HLS to a greyscale png

    I am able to use the color matrix filter to change the pngs
    that I am loading dynamicly. Thing is, I can't seem to figure out
    how to apply a SPECIFIC hue, saturation and luminance.
    Basically I can successfully modify my grey scale png to all
    sorts of colors already. I need to be able to colorize them with,
    for example I would in photoshop put in H:212 S:36 L:-48 and it
    would turn out a great blue... how do I turn those numbers in to
    the proper color matrix to be applied?
    I have done a good bit of research on hls/rgb and also tried
    using this adobe sample app to put in numbers similar to above,
    expecting to get a matrix that would apply those transformations.
    Using the resultant matrix, the image stays at a very low
    saturation even when using positive luminance values. I could guess
    at it, but I have a bunch of PMS colors I am going to have to
    match... SO at least being able to convert HLS or RGB into an
    applicable color matrix with predictable results is needed.
    Here is a sample of what I am trying to do, but just using
    CSS and JavaScript.
    http://www.customtiedye.com/colors.htm
    - Since it is using pngs you can't use internet explorer to view it
    properly. But even if you have only ie, you can see that changing
    the selection in the lower drop down box shows you a different
    color of the shirt. All of these images were colorized in photoshop
    from the same source image I am using in the flash application. I
    need to translate the HLS numbers I used in photoshop into
    colormatrices to apply to the same image.
    Here is what I have so far for the flash application.
    http://www.customtiedye.com/dyeshop.html
    - If you don't see the flash app, try in IE, I have not bothered
    tweakin anything as far as html because I am stuck at this issue.
    The buttons are not marked right, start at the top and go
    down, you'll see what I mean. I can apply the color matrixes and
    the effect is working, but HOW DO I GET THE SPECIFIC MATRICIES FOR
    SPECIFIC COLORS?
    Please help :o) Thank you in advance.

    Thanks for the reply. I've seen every example out there I
    believe. From satori color to quasimondo. The problem is not making
    it work. The problem is how to make it show an exact color.
    How do I use colormatrix to colorize a greyscale image to a
    SPECIFIC color. It's a great tool and I can change my greyscales to
    all sorts of colors, but how do I make them a SPECIFIC color, like
    with setrgb I could just set the rgb, if I have hls values how do I
    convert that into a useable colormatrix to modify a greyscale.
    For instance: (please read)
    In photoshop I would adjust hls and put in say: 212/60/60 for
    a nice blue, apply it and my grey scale is now a nice blue.
    In flash, how do I use that info to change the grey scale
    image to the same color?

  • NEED HELP IN MATRIX WITH GROUP REPORT

    Dear All,
    I need small help in MATRIX WITH GROUP REPORT In Report Builder Test Report
    In my report, having periods as rows and location as columns as shown below,
    1) LOC-A
    JAN-10 FEB-10
    ITEM-GROUP -1 1 2
    ITEM-GROUP-2 3 4
    ITEM-GROUP 3 5 6
    2) LOC- B
    MAR-10 APR-10
    ITEM-GROUP -1 7 8
    ITEM-GROUP-2 9 10
    ITEM-GROUP-3 11 12
    But comming to my requirement, the periods should be in fix in matrix as shown below
    1) JAN-10 FEB-10 MAR-10 APR-10
    LOC-A
    ITEM-GROUP -1 1 2
    ITEM-GROUP-2 3 4
    ITEM-GROUP 3 5 6
    LOC- B
    ITEM-GROUP -1 0 0 7 8
    ITEM-GROUP-2 0 0 9 10
    ITEM-GROUP-3 0 0 11 12
    I am unable to get this kind of output format
    Please kindly waiting for reply from our team....
    Regards
    krishna.P

    For the periods, create a seperate dummy query and then use it as column group in the multi query matrix.

  • Getting EJB spec violation error - please help

    I'm getting following error while trying to deploy my stateless SB.
    17:13:30,399 WARN [verifier] EJB spec violation:
    Bean : UnifiedMsg
    Method : public abstract UnifiedMsg create() throws CreateException, RemoteExcep
    tion
    Section: 7.10.6
    Warning: The method return values in the home interface must be of valid types f
    or RMI/IIOP.
    17:13:30,399 ERROR [MainDeployer] could not create deployment: file:/C:/AddOnPkg
    /jboss-3.2.5/server/all/deploy/webmail_ejb_session_umm.jar
    org.jboss.deployment.DeploymentException: Verification of Enterprise Beans faile
    d, see above for error messages.
    at org.jboss.ejb.EJBDeployer.create(EJBDeployer.java:517)
    at org.jboss.deployment.MainDeployer.create(MainDeployer.java:790)
    at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:644)
    at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:608)
    at sun.reflect.GeneratedMethodAccessor18.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    I've double check the section 7.10.6 requiremnts and do not find anything wrong. Stuck at this from many days,PLEASE HELP
    SB home interface is as follow:
    import java.util.*;
    import javax.ejb.*;
    import java.rmi.*;
    public interface UnifiedMsgHome extends EJBHome {
    public UnifiedMsg create() throws CreateException, RemoteException;

    Hai,
    My dear friends, I am getting some problem. In my system only. mean. I am getting from the CVS and as our batch file i am deploying. I thing, this problem i am only getting in my team. By givein this error. i repleace the JBoss server from my backup softwares. Even it is giving same error. three of our team also check the bug, but not able to resolve. Let me know any external errors instemd of ejb method errors. because it is working in the other systems.
    the bug details:
    14:20:56,717 INFO [EARDeployer] Init J2EE application: file:/D:/jboss-4.0.2/server/default/deploy/matrix.ear
    14:21:02,530 WARN [verifier] EJB spec violation:
    Bean : AddressManagerSessionBean
    Section: 22.2
    Warning: The Bean Provider must specify the fully-qualified name of the Java class that implements the enterprise bean's busines
    Info : Class not found on 'uk.ses.matrix.address.bean.AddressManagerSessionBean': Unexpected error during load of: uk.ses.matr
    14:21:02,530 WARN [verifier] EJB spec violation:
    Bean : ADMCustomerSessionBean
    Section: 22.2
    Warning: The Bean Provider must specify the fully-qualified name of the Java class that implements the enterprise bean's busines
    Info : Class not found on 'uk.ses.matrix.address.bean.ADMCustomerSessionBean': Unexpected error during load of: uk.ses.matrix.
    14:21:02,530 WARN [verifier] EJB spec violation:
    Bean : ADMServicePointSessionBean
    Section: 22.2
    14:21:02,608 ERROR [MainDeployer] could not create deployment: file:/D:/jboss-4.0.2/server/default/tmp/deploy/tmp17389matrix.ear
    org.jboss.deployment.DeploymentException: Verification of Enterprise Beans failed, see above for error messages.
    at org.jboss.ejb.EJBDeployer.create(EJBDeployer.java:553)
    at org.jboss.deployment.MainDeployer.create(MainDeployer.java:918)
    at org.jboss.deployment.MainDeployer.create(MainDeployer.java:910)
    at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:774)
    at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:738)
    at sun.reflect.GeneratedMethodAccessor49.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    please give suggestions to solve this.

  • Do I need to install oracle 8i or 9i Please help

    Hi,
    I am a newbie to Redhat linux and Oracle. I have Redhat 9.0 installed on my machine. Now I have a doubt whether to install Oracle 9i or 8i. Some of my friends told me that Oracle 8i is very easier to configure than Oracle 9i. I think I am not fit for a tough configuration as I am a newbie. This is true? Is Oracle 9i is very difficult to configure than Oracle 8i? My aim is to get familiar with the Oracle and its all the features and to seriously play around with the good features of Oracle. So should I go for Oracle 9i? As I am a newbie, Is it nessessary to go for Oracle 9i?
    Please help me . I am waiting for your answer to get proceed with the Installation.
    Lot of Thanks in Advance.
    Waiting for your respondse.
    Bye
    Thanks and Regards
    Emmanuel mathew

    Hi,
    unfortunately you will have more general problems. Neither 8i nor 9i is certified for Red Hat 9. The certification matrix shows support for Red Hat 7.0 and 7.1 (9i) and for Red Hat 7.0/7.1/6.x (8i). That does not necessarily mean, it won't work at all, but Oracle doesn't give any support. In general, you should prefer 9i, you have much more options. If you perform, as a first step, a standard installation, it's not harder than an 8i installation.
    Good luck
    Werner

  • Error inOID installation,please help.

    I have been trying to install OID in RHEL machine but it doesnt install successfully. I get the below error everytime in the log file. Has anybody experinced it and if yes how did you solve the issue?
    [2010-01-28T13:12:44.882-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] Start of create component
    [2010-01-28T13:12:44.885-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] Action for the oid1 is START
    [2010-01-28T13:12:44.885-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] Trying to start the component oid1
    [2010-01-28T13:12:44.947-06:00] [as] [WARNING] [] [oracle.as.config] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] Failed to start component oid1[[
    oracle.as.config.ProvisionException: HTTP status code = 400 : No processes or applications match the specified configuration.
    at oracle.as.config.impl.OracleASComponentBaseImpl.manageProcess(OracleASComponentBaseImpl.java:942)
    at oracle.as.config.impl.OracleASComponentBaseImpl.start(OracleASComponentBaseImpl.java:1061)
    at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:153)
    at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:938)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
    at java.lang.Thread.run(Thread.java:619)
    [2010-01-28T13:12:44.948-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] Status of component false
    [2010-01-28T13:12:44.949-06:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [[
    oracle.as.config.ProvisionException: Failed to start the component
    at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:157)
    at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:938)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
    at java.lang.Thread.run(Thread.java:619)
    [2010-01-28T13:12:44.949-06:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [SRC_CLASS: IdMProvisioningEventListener] [SRC_METHOD: onConfigurationError] ENTRY 12717fe5-a7c7-487b-b5cf-707d11b28aa8
    [2010-01-28T13:12:44.949-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
    [2010-01-28T13:12:44.950-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID 12717fe5-a7c7-487b-b5cf-707d11b28aa8
    [2010-01-28T13:12:44.950-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] ErrorID: 35076
    [2010-01-28T13:12:44.950-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] Description: [[
    Error creating ASComponent oid1.
    Cause:
    An internal operation has failed: Failed to start the component
    Action:
    See logs for more details.
    [2010-01-28T13:12:44.950-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
    [2010-01-28T13:12:44.951-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> eventResponse ==oracle.as.provisioning.engine.ConfigEventResponse@1a0b9e
    [2010-01-28T13:12:44.951-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Configuration Status: -1
    [2010-01-28T13:12:44.951-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Asking User for RETRY or ABORT
    [2010-01-28T13:12:44.951-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [OOB IDM CONFIG EVENT] onConfigurationError -> ActionStep:OID_START
    [2010-01-28T13:12:44.951-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000IPqJTSX1Zbd5Tf5Eic1BOTk700000Q,0] [SRC_CLASS:
    Appreciate your help,
    Gitanjali.

    yes it is OID 11g installation and the components are as per the certification matrix.
    I see the below messages in $MIDDLEWARE_HOME/asinst_1/diagnostics/logs/OID/tools/oid1/oidldapd01-0000.log file:
    [2010-02-03T09:57:40-06:00] [OID] [NOTIFICATION:16] [] [OIDLDAPD] [host: tthomas-lnx] [pid: 9313] [tid: 1] ProcessDispatcher: sgsluscpPollPort: Recvd connect from server process 9317
    [2010-02-03T09:57:40-06:00] [OID] [NOTIFICATION:16] [] [OIDLDAPD] [host: tthomas-lnx] [pid: 9313] [tid: 1] ProcessDispatcher: sgsluscHsHandShake : Sending Conn ACK to server process 9317
    [2010-02-03T09:57:40-06:00] [OID] [NOTIFICATION:16] [] [OIDLDAPD] [host: tthomas-lnx] [pid: 9313] [tid: 2] DispatcherListener: Listening on (IPV6) NON SSL port = 3060
    [2010-02-03T09:57:40-06:00] [OID] [NOTIFICATION:16] [] [OIDLDAPD] [host: tthomas-lnx] [pid: 9313] [tid: 2] DispatcherListener: sgslunlListen: Listen failed, OS error = (98)
    [2010-02-03T09:57:40-06:00] [OID] [NOTIFICATION:16] [] [OIDLDAPD] [host: tthomas-lnx] [pid: 9313] [tid: 2] DispatcherListener: Listen on (IPV4) NON SSL port = 3060 failed, ignoring ...
    [2010-02-03T09:57:40-06:00] [OID] [NOTIFICATION:16] [] [OIDLDAPD] [host: tthomas-lnx] [pid: 9313] [tid: 2] DispatcherListener: Listening on (IPV6) SSL port = 3131
    [2010-02-03T09:57:40-06:00] [OID] [NOTIFICATION:16] [] [OIDLDAPD] [host: tthomas-lnx] [pid: 9313] [tid: 2] DispatcherListener: sgslunlListen: Listen failed, OS error = (98)
    [2010-02-03T09:57:40-06:00] [OID] [NOTIFICATION:16] [] [OIDLDAPD] [host: tthomas-lnx] [pid: 9313] [tid: 2] DispatcherListener: Listen on (IPV4) SSL port = 3131 failed, ignoring ...
    could this be a problem? There are no processes using port no 3060 or 3131, still why it is throwing this error?
    Please help.
    thanks,
    Gitanjali.

  • ERROR PLEASE HELP URGENT!!!!!!!!

    HI,
    I am getting following error
    REP-3000: Internal error starting Oracle Toolkit.
    when I try to run my reports through browser.
    can any one please help me.
    Its very urgent.
    TIA
    Rajesh

    I think knows Matrix reports very well Thiruchendhuran
    Selladurai
    Thanks
    Raja

  • Export error. Please help

    Hi ALL,
    When i try to export the database i am getting the following error. Please help
    C:\>exp cas/compass@prd_test file='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.dmp' log='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.log'
    Export: Release 10.2.0.1.0 - Production on Wed Feb 3 06:04:25 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    EXP-00056: ORACLE error 6550 encountered
    ORA-06550: line 1, column 41:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 15:
    PL/SQL: Statement ignored
    EXP-00000: Export terminated unsuccessfully
    The version of the db and export utility is same as u see from below.
    C:\>sqlplus "/as sysdba"
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 3 06:06:35 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL>
    Regards
    Arun Kumar

    One of the most common causes of these errors is that you are using a higher version of the export utility compared to your RDBMS version. For instance, you might be using the Oracle 10.2.0 exp utility against an Oracle 9.2.0 database. Use the 9.2.0 exp utility instead. Metalink Note 132904.1 discusses the compatibility matrix between exp and database versions.

  • Please help. Color shift in Aperture, iPhoto, Preview ...

    I get a color shift on all my photos to more pink colors.
    Red gets pinkish
    Blue gets purple
    .. and so on
    iPhoto screwes up like Aperture and so does "the slide show function" in Finder and Preview.
    It's nothing wrong with my calibration. It's all hardware calibrated and Photoshop displays the pictures correct.
    Does all of Apple's software that's supposed to be ColorSync friendly use the same resource when displaying pictures onscreen?
    Seems like a common bug for all Apple Software built into the system.
    Changing Color profile for my displays doesn't make a difference.
    Please help !
    I'm going crazy

    Digitaldog:
    Pictures are from a varied set of sources. Some from
    SLRs like Canon EOS 5D & 10D, some from scanners.
    DSLRs don’t embed true ICC profiles but instead EXIF data. ICC aware applications don’t look for that. The files are probably in Adobe RGB (1998) as you say but might be untagged (meaning, there’s no true ICC profile embedded in the file). It’s easy enough to test.
    There's no difference in appearance between these
    pictures onscreen
    On screen where? Photoshop can read the EXIF data if you have your preferences set.
    What do you mean?
    Are pictures taken on my EOS 5D not tagget as Adobe
    RGB?
    Not as far as ICC aware applications are concerned.
    Photoshop says different.
    They all show up as tagged.
    Still, humor me and use the Assign Profile command and pick Adobe RGB (1998) then save the file again.
    You imply that a file can be "in Adobe RGB and
    untagged" ?
    A file can be in any color space an untagged. It’s RGB or CMYK mystery meat. The profile only defines the scale of the exiting numbers for ICC aware applications. Lots of dumb web browsers show similar issues. You have data that IS in Adobe RGB (1998) but the browser doesn’t know this. It sends the numbers directly to the screen and the preview isn’t correct.
    True ICC profile? Does the opposite exist?
    From page 167 of my book:
    EXIF Data and the Lie about Your Color Space: For whatever reason, when a consortium
    of Japanese camera manufacturers came up with a method of identifying the RGB color space
    of their camera data using EXIF data, they did so in an obscure and confusing way. In 1999,
    the Japanese digital camera industry implemented a “standard format”they called Design Rule
    for Camera File Systems version 1.0,or DCF for short.In that specification,the EXIF data simply
    specified whether the camera data was encoded into sRGB based on the matrix setting con-
    figured on the camera. If a camera encoded the data to Adobe RGB (1998) or any other avail-
    able color space besides sRGB,the EXIF tag was set to “none,”causing Photoshop to produce
    a Missing Profilewarning dialog if the color settings were configured to warn the user. This
    caused all kinds of problems,to the degree that Adobe had to produce a plug-in for Photoshop
    7 (and a setting in the general preferences for Photoshop CS as well as CS2) called Ignore EXIF
    profile tag(see Fig. 5-4). This sets Photoshop to ignore the color space specified in the EXIF
    data and the result is a Missing Profilewarning dialog,which allows the user to pick the correct
    profile to assign. In late 2003, DCF 2.0 was introduced and it does specify Adobe RGB (1998)
    in the EXIF data. Not all new cameras necessarily support this, however. None of this has any
    effect on RAW data although it still does apply when a camera is set to shoot RAW+JPEG files.
    PowerBook, G5   Mac OS X (10.4.3)  

  • PowerMac G5 visual problem - PLEASE HELP!

    So I have a relatively old (2004/5) G5 PowerMac that has 10.5.6 running on it. Anyway, right after I bought the original computer I purchased an upgraded ATI Radeon 9800 AIW Pro card which worked great for the past 5 years. About a year ago after I started using the computer for about an hour the screen would start to look like something out of the matrix. There were horizontal and vertical bars all over the screen, all different sizes, all different colors. It began to spread sporadically out of lines and into just total pixellation across my entire screen. Anyway...
    I had a professional come check it out and he said that the graphics card I had was fried. He told me that if I put the old one in that it should work fine (the old one being an ATI Radeon 9600 Pro). Well I put the original graphics card (that was never used and always in a safe container) and the problem remains. Additionally, my computer began shutting down and rebooting in a 5 second cycle and now it won't boot up at all, it just remains frozen on the grey introduction screen.
    Some things to note:
    - I do not have the original install disc for the computer
    - my iStat pro dashboard app says that all my friends are running strong, except that the slot fan and the back fan are running at 50 RPM (i investigated and all the fans were definitely running faster than that, including the on-board graphics card fan)
    - I have cleaned all components, double checked connections, etc.
    - When I run the computer without the side-protective wall (meaning I took off the tower's wall and the clear-protective thing) the computer becomes much louder with the fans and processors all running at a decibel level similar to that when it worked
    - I bought the ADC to DVI adapter for my older G4 Cube monitor to run on the tower and the adaptor works fine.
    - When i slightly moved the graphics card the horizontal bars change colors and size
    My personal amateur diagnosis is that the processors or motherboard are somehow not working.
    PLEASE HELP!

    See if any of these key combos work...
    Does it boot into Open Firmware with CMDOption+of ?
    http://docs.info.apple.com/article.html?artnum=42642
    reset-nvram (press Enter)
    set-defaults (press Enter)
    reset-all (press Enter)
    Have you done a PRAM reset...
    http://docs.info.apple.com/article.html?artnum=2238
    Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3...
    http://support.apple.com/kb/HT1939
    How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)…
    http://support.apple.com/kb/HT1436?viewlocale=en_US
    Try a Safe Boot from the HD, (holding Shift key down at bootup).

Maybe you are looking for

  • Mass Unblocking of PO lines

    Hi Experts, Let us say in an STO (Stock Transfer Order), I have LOCKED the PO line item, and I will unlock it for further processing at a later stage. I have many such STOs with lines LOCKED. Is there any mass function which will enable me to UNLOCK

  • What happened to the Web Gallery list in my iPhoto 08 sidebar?

    I posted a web gallery yesterday. It's visible online, but no longer listed in the iPhoto sidebar (along with albums, events, etc.). Is this right or has something gone wrong? I'd like to have it back so that I can invite others to come view the gall

  • IMPORT lt_pgrp FROM MEMORY ID 'PGRP'.

    Can you please explain what the following syntax is doing . IMPORT lt_pgrp FROM MEMORY ID 'PGRP'.

  • Custom Page

    Hi, I am using crystal reports Visual Studio.Net 2005. I have done a report using custom pagesize for a line printer. Its size is Width:34.54cm and height:30.48. When I am printing from crystal report it prints well and no probs, but if i am exportin

  • Guest only access on Back to My Mac

    I have three computers, all running 10.8.1. Two of the computers are at my home and the third is at my office. All three share the same appli i.d. with Icloud. When I try and access the mac at my office remotely, I can only get guest access. It will