Please help me for Parameters of the reports in client server mode
Dear reader,
I have a problem,
suppose there is a hierarchy of listings in reports e.g.
countries, states, provinces, districts.
in the parameter if i want to list the districts of the selected
provinces, provinces of the selected states, states of the
selected countries,
then how the code for the parameter must be written. this i am
unable to do as the parameter's select statement does not accept
a bind variable as the WHERE condition.
please help me in integrating the 4 parameters.
thanks in advances. please reply as soon as possible.
thanks & regards.
Bhakti.
Dear ileana,
I have tried the the option you have suggested and i was
successful.
Now there is another problem. As i had described the problem, i
have 4 parameters to use in hierarchy. but if i leave any of
them as NULL the report goes bust. i have defined REF cursors
for each of the parameter but cannot use it simultaneously as a
group error occurs.
could you help me out with this too.
thanks in advance.
bye
Bhakti
Similar Messages
-
Please tell me how to use the Simple bluetooth client server example.
Hi i used the simple bluetooth client server example in labview 7.1. Iam getting an error saying your system does not support the network operation. I have following doubts also.
1. Should i pair the device before running the labview.
2. Should i enable the file transfer wizard in the software given with the bluetooth adapter.
Please help
Thank you
R.Prem kumar
09940446193Hi R.Prem,
Could you please let me know what error code is associated with this error message? Also could you please provide a description of the setup you are currently using? Thanks!
Best regards,
Steven -
HT1414 Turn Passcode Off is disabled in my iPod touch 5. Could you please help me for the same ?
Turn Passcode Off is disabled in my iPod touch 5. Could you please help me for the same ?
What do yoo mean?
-
Can you please help me. I purchased the new Apple I 4s phone from AT&T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's ATT service plan. They paid the bill for my service. Since, I have left the company. I have retained, and assumed financial responsibility for the phone, and the phone number with AT&T. The same day I assumed ifinancial responsibility, I had the phone number ported to a new service provider. ( Straight Talk ) After doing so, my phone worked fine. (as far as cellular service) NO DATA Service !!!! I have been on the phone with AT&T, Straight Talk, and Apple, FOR HOURS over TWO days!!! Trying to get this problem resolved. All I need to do, is change my APN settings (access point name ) settings. Its my phone!!! Why does any body have this APN menu locked from me??? I've been on the phone for two days between, AT&T, Straight Talk, and Apple products technical support teams. Everybody points the finger at the next guy!! What can I do to get the phone, that I paid for, work for more than just a phone, and a paper weigh?
PLEASE HELP ME!!!!!
Jason
Sent from my iPhone
<Email Edited by Host>Wow... you seriously over paid for an iPhone.
That probably explains why you have/had no clue you were purchasing a locked device and think it's an Apple problem to get it unlocked. -
I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same. Basically I am trying to take back to upgrade my ios to 5 or 6 version.
You can't back up to iCloud until you update to iOS 5 or higher. You will have to back up your iPod on your computer using iTunes. Update iTunes on your computer to the latest version, then connect your iPod to your computer, open iTunes, if iTunes give you a pop-up asking if you want to update your iPod, decline. Then click on the name of your iPod in iTunes, go to File>Devices>Transfer Purchases to transfer any purchased media to your iTunes library. Next, go to the Summary tab of your iTunes sync settings and click on Back Up Now to back up your iPod on your computer.
When it's done backing up, click on Check for Update (or Update) on the Summary tab of your iTunes sync settings. Allow your iPod to update, and leave it connected to your computer. At the end, it will restart and give you the option to restore to the iTunes backup you made earlier. Choose this option to restore your backup and sync your apps and other iTuens media to your phone.
This process is outlined in this article: http://support.apple.com/kb/HT4972, under "If you are attempting to update using a Mac or PC with which you normally sync". -
I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron -
Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!
That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer. -
Please help us, after we installing the flash player is said that the plug-in version is not installed and i need Flash Player for my windows 7 Professional 64-bit Japanese version and Internet explorer 10
Hello,
There are two versions of Flash Player for Windows: ActiveX for Internet Explorer and Plug-in for non-IE browsers. It appear you may have installed the one for non-IE browsers. Please use the links below to download and install:
Flash Player ActiveX (Internet Explorer
Flash Player Plug-in (All other browsers)
Maria -
Dear Friends, I am trying to draw a structure in Adobe Illustrator with 3D effect. But I am unable to give it proper shape. Can someone please help me for drawing the similar structure as showed below. I have facing problems in giving 3D effect.
Thanks a lot for your great help...i made a quick example:
and what it's made of:
just shapes and gradients. used a combination of pathfinder and shape builder to get the shapes exact. -
Please help I am suddenly getting the following from my calendar The server did not recognize your user name or password for account “...” Make sure you enter them correctly.I have even tried changing the password and no luck. I depend on it syncing with mobile me and my phone and I need it for work.
I have been having the same issue but I think I fixed my problem. In iCal, click iCal, Preferences, Accounts and retype your password. That seems to have done the trick for me as far as I can tell.
-
I cant remmber the restrictions passcode please help me for important
i cant remmber the restrictions passcode please help me for important
If you cannot remember the restrictions passcode, the only alternative is to restore the phone as a new device. Trying to restore from backup will only put the passcode back on. There is no other alternative. See the user manual. http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
-
P6 user name is not valid for connecting to the reporting database
No data is available because your P6 user name is not valid for connecting to the reporting database
I am getting above error in the following environment:
P6 running on wls instance 1.
BI Publisger running on wls instance 2
MS SQL server 2005
Note that the error appears when I clink on the 'Reports' tab in P6. My admin user on P6 has access to report/analyser modules.
To connect P6 to BI Publisher I am using 'PxRptUser' in the P6 configuration for Bi Publisher. I know as well that the WSDL URL is correct and I can test this in SoapUI tool.
In BI publisher I have created the PMDB data source using PxRprUser, and the test of this connection works.
(Because the report samples come with Oracle flavoured SQL that SQL server does not like, I have configured BI Publisher so I have just a single report left that sources it data from an xml file. This works in BI Publisher. It also helps me in that I do not need to add 'WHERE' clauses and parameters required for SQL server?)
Furthermore, using a DB tool, I can connect to my SQL server using PxRPTUser.
So why do I get the error above?
I picked up somewhere that I should not be adding users to BI Publisher. Funny enough, testing the 'login' method the BI Publisher exposes through its WSDL (as above) I noticed I HAD to create the user PxRptUser in BI publisher application itself (on top of PxRptUser in database) for the login web service to work with PxRptUser
That did not solve the connection between P6 and BI Publisher though. What am I missing ...
Edited by: user3674522 on 10/11/2011 20:16Thought I found something but can't repliacte, som issue is still there:
Had a look at the wls instance logs where BI publisher is running, and the error I get is:
111111_023646955][][ERROR] javax.naming.NamingException: Unresolved naming: cn=admin, dc=user, dc=users, dc=principals at [cn=admin]
That user, admin, is the one I have used to access P6. Why is this passed on to BI Publisher? I thought the idea was that the PxRptUser set in BI Publisher configurations in P6 would be used?
Edited by: user3674522 on 10/11/2011 20:17 -
IOS 7 very slow, i have many problem , exemple download documents , typing doc to go . Very slow, sometime no response , please help us for this error,
spacepilot wrote:
i live in the WS10 / 0121 area and have been having similar problems. i have an up to 20mb services, but up to a month ago connected at 4800, then my line went dead for 6 days, and all indis could do was send me new router, which came the day after my line was restored, but had dropped to 2418 and remained so for the past 3 to 4 weeks, then i dropped to 1963 yesterday, and 729 today.
all speeds are far lower on my upto 20mb than they where on my upto 8mb link.
foegot to add, i reported the problem via the report a problem link, which hopefully will be red by someone with a firmer grasp of english that the normal call centre staff
welcome to the forum why don't you start your own subject and post the adsl stats from your router and also run btspeedtester and post the results and someone may be able to offer assistance
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???
You can create an Apple ID without a credit card by following this guide exactly: http://support.apple.com/kb/ht2534. Note that you have to start by downloading a free app, then create the ID.
Maybe you are looking for
-
Hi, I am looking for documentation / advice on how to generate files in SAP for the electronic payments for a mexican company code using F110. Thank you in advance Sanjiv
-
I have two Business partners for a user, example 1 and 2. Currently BP 2 has org structure relationship in PPOMA_BBP.But i need the assignment for BP 1.How to do this.I have checked in BP transaction under Identification tab for employee data,It cont
-
Odd bug... anyone else seeing this?
I have had this three or four times already and haven't seen any posts about this. Sometimes I fully charge my PlayBook, use it for a little while, put it to sleep and leave it somewhere. When I come back a few hours later the BlackBerry logo on th
-
Dynamic Range Compression for Gam
Hi, all, thanks in advance for any help with this. I've recently acquired an Audigy2 Value card, and the specifications on the website stated that the card could perform Dynamic Range Compression. However, now having it home and looking over the soft
-
What is iConcertCal and why is it asking me the same question?
Within the last month, every time I start up iTunes I get a window with the following at the top - "iConcertCal could not locate the file 'iTunes Music Library.xml', please locate it now." The first three times I located the file for it but it keeps