Please, help me. Licensing error

Hi, i bought Final Cut Studio. Everything was ok until now.
I was downloading the last update for soundtrack pro, suddenly, when it finished downloading, i wanted to open the application and it asked me for name, and serial number. I did it.
But the application rejected it wit the next alert.
Licensing error, this application cannot continue
because the licensing data is corrupt.
Alert unable to license (code 223)
Please help me with this. i was working with it and i can't continue because of that.
Thanks

I sorta had the same problem. I have been using Fianl Cut Studio ever since it first came out, what is that over a year and a half. I had an upgrade version. I had several different Final Cut Pro's before getting the full consumer Production Suite. I had Final Cut Pro 4 as a single version first before anything else. I have been updating through Software updates all along and then Wham.
Today I downloaded and updated the latest version for Soundtrack Pro. I thinks it's version 1.0.2.
After updating it asked me for my serial numbers. The only trouble is after putting in my Studio number for FCP and then going to the next serial number screen I noticed that it remembered my original version of Final Cut Pro 4 serial number which I bought before Studio. I haven't had that version in my computer for years. So when I put in the other serial numbes for DVD Pro 3 and Motion it says it's invalid.
I can't find the file that holds the serial number nor can I figure out how to get it to take my number for my Production Suite FCP.
I can't figure out why it asked for my serial numbers in the first place, none of the other updates did. I'm running FCP 5.0.4, DVD Studio Pro 4.0.2, Motion 2.0.1, etc. It's not like I haven't updated before.
So I ended up getting the same message about the corrupt licensing data as well.
That's it for me. Can't figure out how to make it work now.
Any help would be greatly appreciated.

Similar Messages

PLEASE HELP! Installation errors with creative suite 5.5 design premium?

I recently tried to install creative suite 5.5 design premium on to my home computer with windows vista home premium and it was all going fine then right at the end of the installation this message popped up please help??
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 14 error(s), 4 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
                Family: Photoshop
                ProductName: Adobe Photoshop CS5.1 Core_x64
                This parent relationship is not satisfied, because this payload is not present in this session.
ERROR: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
                Family: InDesign
                ProductName: Adobe InDesign CS5.5 Icon Handler x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
                Family: Adobe Web Suite CS5.5
                ProductName: Adobe Media Encoder CS5.5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
                Family: Adobe Web Suite CS5.5
                ProductName: Adobe Media Encoder CS5.5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: Adobe Player for Embedding x64 3.1
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: Shared Technology
                ProductName: Photoshop Camera Raw (64 bit)
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: AdobeCMaps x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: Adobe Linguistics CS5 x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: AdobePDFL x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: AdobeTypeSupport x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
                Family: Adobe Web Suite CS5.5
                ProductName: Adobe Media Encoder CS5.5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Dreamweaver CS5.5 depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe Photoshop CS5.1 Core depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe Illustrator CS5.1 depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe InDesign CS5.5 Application Base Files depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe CSXS Extensions CS5.5 to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

i tried all the thinks listed and uninstalled then reinstalled creative suite 5.5 design premium and yet again this showed up at the end please help it mean nothing to me help!
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 17 error(s), 8 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS5.1 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
ERROR: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
Family: InDesign
ProductName: Adobe InDesign CS5.5 Icon Handler x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe Player for Embedding x64 3.1
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: Shared Technology
ProductName: Photoshop Camera Raw (64 bit)
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobeCMaps x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe Linguistics CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobePDFL x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobeTypeSupport x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.9E3C8AP-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Design Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {BD85DFD4-005F-4219-8E27-C922CC4D8A61} Adobe CSXS Extensions CS5.5 2.5.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\CS5.5ServiceManager\lib\CSXS-Installer-Hook.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 130)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 130)
----------- Payload: {4C08199E-0D93-4227-8325-F024E71CA7A1} Adobe SING CS5 3.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\SING\Mark II\SING.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 2)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 2)
----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Isabel\Desktop\Creative Suite 5.5 Design Premium\adobe 5.5 code\Creative Suite 5.5 Design Premium\Adobe CS5_5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
----------- Payload: {5BDE0A1B-35BF-4224-A54F-73786EECDFC1} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_GBLanguagePack 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Isabel\Desktop\Creative Suite 5.5 Design Premium\adobe 5.5 code\Creative Suite 5.5 Design Premium\Adobe CS5_5\payloads\AdobeFireworks11.1.0en_GBLanguagePack\OEM(Seq 74)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Terry\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Terry\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe SING CS5: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS5.5: Install failed

Please help with this error: "Your request could not be completed because of a disk error"

So photoshop cs6 was working fine a few weeks ago. After not using it for about 2 weeks, I try opening a RAW file and I get this error every time. JPGs open and work fine. I have extensively searched on the internet for solutions and have tried everything such as: disk checking, deframgenting, playing around with photoshop preferences, deleting temp files, resetting preferences, clearing disk space. I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!

mistahbo1 wrote:
…I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!
That's woefully inadequate for scratch file space.
The rule of thumb I follow says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 300 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
Additionally, if either one those two drives you mention with "16 GB free and the other with 8 GB free" happened to be your boot drive, you'd be in a heap of trouble because neither one of those drives has nearly enough space to accommodate the swap files of the OS and Photoshop's scratch.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I have 16 GB of RAM installed:

Please Help!! Error in document : BKPFF $ DEVCLNT

Hi All Gurus,
I am trying to use BAPI - BAPI_ACC_DOCUMENT_POST to post to FB50.
I am using the below paramaters -
DOCUMENTHEADER
TABLES
       ACCOUNTGL
       CURRENCYAMOUNT
RETURN.
But I am getting the error -   Error in document : BKPFF $ DEVCLNT. Can someone please help me with this. I have been breaking my head over this. Dont know what is going wrong!                     .
Thanks, Nina.

Thanks for all your help, Aaron.
*T Y P E S *
TYPES: BEGIN OF t_indata,
               t_ddate(8) TYPE c,
               t_ref(17) TYPE c,
               t_dbank(8) TYPE c,
               t_disno(4) TYPE c,
               t_glacnt(10) TYPE c,
               t_descrip(50) TYPE c,
               t_damt(13) TYPE c,
               t_jobid(8) TYPE c,
               t_rexpen(8) TYPE c,
               t_tperiod(8) TYPE c,
               t_tnumb(8) TYPE c,
               t_ctrans(8) TYPE c,
               t_ccenter(10) TYPE c,
       END OF t_indata.
TYPES: BEGIN OF t_error,
               t_ddate(8) TYPE c,
               t_ref(17) TYPE c,
               t_dbank(8) TYPE c,
               t_disno(4) TYPE c,
               t_glacnt(10) TYPE c,
               t_descrip(50) TYPE c,
               t_damt(13) TYPE c,
               t_jobid(8) TYPE c,
               t_rexpen(8) TYPE c,
               t_tperiod(8) TYPE c,
               t_tnumb(8) TYPE c,
               t_ctrans(8) TYPE c,
               t_ccenter(10) TYPE c,
               message(100)     type c, " Error message
      END OF t_error.
*W O R K A R E A S *
DATA: w_indata TYPE t_indata,
      w_error TYPE t_error.
*I N T E R N A L T A B L E S *
DATA: i_indata TYPE STANDARD TABLE OF t_indata WITH HEADER LINE,
      i_error TYPE STANDARD TABLE OF t_error WITH HEADER LINE.
DATA: i_acgl LIKE BAPIACGL09 OCCURS 0 WITH HEADER LINE,
      i_currency LIKE BAPIACCR09 OCCURS 0 WITH HEADER LINE,
      i_return LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
*V A R I A B L E S *
DATA: v_file       TYPE string,
      v_string(1022),                " To read data from file
      v_ddate(10) TYPE c,
      v_pdate(10) TYPE c,
      v_dcre       type wrbtr,            " Dollar Amount credit conv
      v_ddeb       TYPE wrbtr,           " Dollar Amount debit conv
      v_lines TYPE i,                   " used for format message
      v_msg(100),                        " used for Error message
      v_ind   TYPE i,
      v_index type i.
DATA: V_DOCHEADER LIKE BAPIACHE09.
     V_OBJ_TYPE LIKE BAPIACHE09-OBJ_TYPE,
     V_OBJ_KEY LIKE BAPIACHE09-OBJ_KEY,
     V_OBJ_SYS LIKE BAPIACHE09-OBJ_SYS.
*C O N S T A N T S *
CONSTANTS: c_creacnt TYPE string VALUE '111444', " Liability account
           c_del type x value '09',               " for hash delimited file
           c_fslash VALUE '\',                    " Used for Forward slash
           c_bslash VALUE '/'.                    " Used for backward slash
*S E L E C T I O N S C R E E N
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK first WITH FRAME TITLE text-001.
PARAMETERS: p_fname LIKE rlgrap-filename OBLIGATORY DEFAULT 'C:\CorpCard.txt', " File name
            rd_pserv RADIOBUTTON GROUP radi DEFAULT 'X',                    " Pres. Server
            rd_aserv RADIOBUTTON GROUP radi.                                " App. Server
Error file
parameters: p_efile type rlgrap-filename default
'/tmp/CorpCard_error'.
SELECTION-SCREEN END OF BLOCK first.
At selection-screen
Check which file is selected
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
Perform to get the current value of the selection screen
PERFORM get_current_value.
IF rd_aserv = 'X'.
    MESSAGE i398 WITH 'Can not browse unix directories'(030).
ELSE.
F4 help for presentation server file name
    PERFORM get_local_file_name USING 'P_FNAME' CHANGING p_fname.
ENDIF.
AT SELECTION-SCREEN.
perform to validate input file
PERFORM validate_filename USING p_fname.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Presentation File upload
if rd_pserv = 'X'.
    perform upload_pre_file.
endif.
Unix File Upload
if rd_aserv = 'X'.
    perform upload_unix_file.
endif.
Perform to populate the internal table to the bapi.
PERFORM populate_debit.
Perform to populate the internal table to the bapi.
PERFORM populate_credit.
Perform to process the input data and post to FB50
PERFORM post_data.
E N D O F S E L E C T I O N *
END-OF-SELECTION.
*if not i_error[] is initial.
perform to generate error file and send to application server
perform generate_error_report.
endif.
*&      Form get_current_value
FORM get_current_value .
Local internal table for screen fields
DATA: BEGIN OF i_dynpfields OCCURS 0.
          INCLUDE STRUCTURE dynpread.
DATA: END OF i_dynpfields.
CLEAR   i_dynpfields.
REFRESH i_dynpfields.
i_dynpfields-fieldname = 'RD_ASERV'.
APPEND i_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-cprog
      dynumb               = sy-dynnr
    TABLES
      dynpfields           = i_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      OTHERS               = 10.
IF sy-subrc <> 0.
    MESSAGE i398 WITH 'Unbale to read the selection screen values'(031)
ELSE.
    READ TABLE i_dynpfields INDEX 1.
    IF sy-subrc = 0.
      MOVE i_dynpfields-fieldvalue TO rd_aserv.
    ENDIF.
ENDIF.
ENDFORM.                    " get_current_value
*&      Form get_local_file_name
FORM get_local_file_name USING p_file
                      CHANGING p_cfile.
Local variable
DATA: l_fname LIKE ibipparms-path,   " File name
        v_repid LIKE sy-repid.
l_fname = p_file.
v_repid = sy-repid.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = v_repid
      dynpro_number = sy-dynnr
      field_name    = p_file
    IMPORTING
      file_name     = l_fname
    EXCEPTIONS
      OTHERS        = 1.
IF sy-subrc = 0.
    p_cfile = l_fname.
ENDIF.
ENDFORM.                    " get_local_file_name
*&      Form validate_filename
FORM validate_filename USING p_fname TYPE any.
IF rd_aserv = 'X'.
Local variable for file length
    DATA : l_len TYPE i.
    l_len = STRLEN( p_fname ).
    IF p_fname CA space.
      IF sy-fdpos < l_len.
        MESSAGE e398 WITH 'File name should not contain spaces'(032).
      ENDIF.
    ENDIF.
    IF p_fname CA c_fslash.
      MESSAGE e398 WITH 'File name should not contain \'(033).
    ENDIF.
    IF p_fname NA c_bslash. " No directory path given
      MESSAGE w398 WITH 'File will be created in home directory'(034).
    ENDIF.
ENDIF.
IF p_fname0(1) = c_fslash AND p_fname1 = space.
    MESSAGE e398 WITH 'File name should not contain only /'(035).
ENDIF.
ENDFORM.                    " validate_filename
*&      Form upload_pre_file
FORM upload_pre_file.
v_file = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = v_file
      filetype                = 'ASC'
      has_field_separator     = 'X'
      dat_mode                = ' '
    TABLES
      data_tab                = i_indata
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE e398 WITH 'Unable to upload the file'(002).
ENDIF.
ENDFORM.                    " upload_pre_file
*&      Form upload_unix_file
FORM upload_unix_file .
open dataset p_fname for input in text mode encoding default.
if sy-subrc <> 0.
    message i398 with 'File open error(012)'(012) p_fname.
    stop.
else.
    do.
      clear: v_string.
      read dataset p_fname into v_string.
      case sy-subrc.
        when 0.
          split v_string at c_del
               into i_indata-t_glacnt
                     i_indata-t_descrip
                     i_indata-t_damt
                     i_indata-t_ccenter.
            append i_indata.
          clear i_indata.
        when 4.
          exit.
        when 8.
          message i398 with 'Unable to Read the File'(008) p_fname.
          stop.
      endcase.
    enddo.
    close dataset p_fname.
endif.
ENDFORM.                    " upload_unix_file
*&      Form post_data
FORM post_data .
V_DOCHEADER-BUS_ACT = 'RFBU'.
*V_DOCHEADER-OBJ_TYPE = 'BKPF'.
*V_DOCHEADER-OBJ_KEY = '$'.
V_DOCHEADER-USERNAME = 'VSAWANT'.
V_DOCHEADER-COMP_CODE = 'BP01'.
V_DOCHEADER-DOC_DATE = SY-DATUM.
V_DOCHEADER-PSTNG_DATE = SY-DATUM.
*V_DOCHEADER-FIC_PERIOD = '00'.
V_DOCHEADER-HEADER_TXT = 'Amex Card Upload'.
V_DOCHEADER-DOC_TYPE = 'SA'.
   CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
     EXPORTING
       DOCUMENTHEADER          = V_DOCHEADER
     CUSTOMERCPD             =
     CONTRACTHEADER          =
   IMPORTING
      OBJ_TYPE                = V_DOCHEADER-OBJ_TYPE
      OBJ_KEY                 = V_DOCHEADER-OBJ_KEY
      OBJ_SYS                 = V_DOCHEADER-OBJ_SYS
     TABLES
       ACCOUNTGL               = i_acgl
     ACCOUNTRECEIVABLE       =
     ACCOUNTPAYABLE          =
     ACCOUNTTAX              =
       CURRENCYAMOUNT          = i_currency
     CRITERIA                =
     VALUEFIELD              =
     EXTENSION1              =
       RETURN                  = i_return.
     PAYMENTCARD             =
     CONTRACTITEM            =
     EXTENSION2              =
     REALESTATE              =          .
refresh i_acgl.
refresh i_currency.
clear i_acgl.
clear i_currency.
if V_DOCHEADER is initial.
i_error[] = i_indata[] .
    read table i_return index 1.
    i_error-message = i_return-message.
    append i_error.
    clear i_error.
else.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    wait up to 3 seconds.
endif.
ENDFORM.                    " post_data
*&      Form populate_debit
FORM populate_debit .
DATA: l_debamt(16) type c.
clear: v_index,
       l_debamt.
loop at i_indata from 2.
v_ddeb = i_indata-t_damt.
v_dcre = v_dcre + i_indata-t_damt.
v_index = v_index + 1.
    i_acgl-ITEMNO_ACC = v_index.
    i_acgl-GL_ACCOUNT = i_indata-t_glacnt.
    i_acgl-ITEM_TEXT = i_indata-t_descrip.
    i_acgl-DOC_TYPE = 'SA'.
    i_acgl-COMP_CODE = 'BP01'.
    i_acgl-COSTCENTER = i_indata-t_ccenter.
    i_acgl-DE_CRE_IND = 'S'.
    append i_acgl.
    clear i_acgl.
   write v_ddeb to l_debamt currency 'USD'.
    i_currency-ITEMNO_ACC = v_index.
    i_currency-CURRENCY = 'USD'.
    i_currency-AMT_DOCCUR = i_indata-t_damt.
    append i_currency.
    clear i_currency.
   clear: v_ddeb.
endloop.
ENDFORM.                    " populate_debit
*&      Form populate_credit
FORM populate_credit .
DATA: l_creamt(16) type c.
clear: l_creamt.
v_index = v_index + 1.
    i_acgl-ITEMNO_ACC = v_index.
    i_acgl-GL_ACCOUNT = c_creacnt.
   i_acgl-ITEM_TEXT = .
    i_acgl-DOC_TYPE = 'SA'.
    i_acgl-COMP_CODE = 'BP01'.
    i_acgl-DE_CRE_IND = 'H'.
    append i_acgl.
    clear: i_acgl.
   write v_dcre to l_creamt currency 'USD'.
    i_currency-ITEMNO_ACC = v_index.
    i_currency-CURRENCY = 'USD'.
    i_currency-AMT_DOCCUR = v_dcre.
    append i_currency.
    clear: i_currency.
    clear: v_index.
ENDFORM.                    " populate_credit
*&      Form generate_error_report
FORM generate_error_report .
data: credit(16) type c.
WRITE :/1 'Title: Corporate Card Upload'(006),
         / 'Program:'(007), sy-repid,
         / 'Date:'(008), SY-DATUM.
skip 1.
uline:/(200).
format color col_heading on.
write:/(1) sy-vline,
         (8) 'Posting Date'(020),
         (1) sy-vline,
         (12) 'GL Account'(021),
         (1) sy-vline,
         (17) 'Description'(022),
         (1) sy-vline,
         (17) 'Dollar Amount'(023),
         (1) sy-vline,
         (17) 'Cost Center'(024),
         (1) sy-vline,
         (100) 'Error/Success Message'(028),
         (1) sy-vline.
uline:/(200).
format color off.
write:/(1) sy-vline,
          (8) sy-datum,
          (1) sy-vline,
          (12) '113000',
          (1) sy-vline,
          (17) 'Clearing Account',
          (1) sy-vline,
          (17) v_dcre,
          (1) sy-vline,
          (100) i_error-message,
          (1) sy-vline.
uline:/(200).
loop at i_error from 2.
    write:/(1) sy-vline,
           (8) sy-datum,
           (1) sy-vline,
           (12) i_error-t_glacnt,
           (1) sy-vline,
           (17) i_error-t_descrip,
           (1) sy-vline,
           (17) i_error-t_damt,
           (1) sy-vline,
           (17) i_error-t_ccenter,
           (1) sy-vline,
           (100) i_error-message,
           (1) sy-vline.
endloop.
uline:/(200).
clear: v_dcre.

Please help me regarding error in jcManager 1.1

Hi Friends..
perhaps this question especially for bebecanu, but perhaps i hope all of you could help me too.. :)
i tried to learn how way jcManager works, so i downloaded the jcManager1.1 source..
i created new application in Netbeans 6.9, and then i copied all of files in the jcmanager.source..
i've set the libraries needed also in Netbeans, i've added the libraries of jpcsc.jar and looks-2.1.4.jar , so assume that there's no error while compile time..
but while runtime, there's message error displayed in the TextArea..
this is the message error :
Exception in thread "Thread-3" java.lang.NoClassDefFoundError: Could not initialize class com.linuxnet.jpcsc.PCSC
     at com.braicu.jcm.card.CardWorker.disconnectCard(CardWorker.java:507)
     at com.braicu.jcm.JCManager$22.construct(JCManager.java:620)
     at com.braicu.jcm.layout.MySwingWorker$2.run(MySwingWorker.java:108)
     at java.lang.Thread.run(Thread.java:619)so, how to initialize class com.linuxnet.jpcsc.PCSC in Netbeans?..
Please help me regarding this..
Thanks in advance..

Hi
You need to have jpcsc.dll (you may find it in the res folder) in your java library path.
So, all you need to do is to specify this VM argument on running:
-Djava.library.path=res
Hope it helps
Stefan

Please Help: Playstation Banned Error Code WS-37338-4

Hi I tried signing into the PSN and got the error code WS-37338-4 saying that "Access to PSN from this PS4 has been banned or temporarily suspended." Can someone please help? I don't play online and literally use my login to update my squads on fifa so I have no idea how I got banned.

ReesFitz92 wrote:
Check your emails. I know they've been banning a number of accounts due to buying coins.They are also clamping down on game sharing particularly the suckers buying cheap digital games off Ebay.

URGENT ! Please Help ! Navigation error....

Hi,
I am getting the following error during navigation from summary report to detail report..
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 1858, message: ORA-01858: a non-numeric character was found where a numeric was expected at OCI call OCIStmtExecute:
My summary report has a dummy column name 'All' and I have specified a navigation to another detail report. However it is throwing me this error when trying to navigate. This is happening even when I am not passing any filters to the detail report. Please help me to resolve this issue as I need to get this done right away.

Couple of things you can check to isolate the prb
Run the detail report individually w/o navigating from the summary report
Also make sure if your summary report runs well as such.
As long as they run indivdually and you not even passing filters ideally it shouldnt cause any issue... Does it generate a SQL?
Thanks
Prash

Please help : Pipline function, error passing parameter

Hello,
Please help a DBA who's trying to make it with PL/SQL (on Oracle 10.2.0.4).
I'm just building a script to find the space used by all the segments (lob, index, partitions) related to a table.
Here is my problem, when I call a table function (DBMS_SPACE.OBJECT_DEPENDENT_SEGMENTS) from within a pipeline function i get an error,
if I turn that function into procedure it is running fine, if I hard code parameters it works...
When running as a function I get the error :
SQL> Select * from table(yke_size_info('SAPRD', 'REPOSRC'));
Select * from table(yke_size_info('SAPRD', 'REPOSRC'))
*+
ERROR at line 1:
ORA-20000: Object does not exist
ORA-06512: at "SYS.DBMS_SPACE", line 2673
ORA-06512: at "SYS.YKE_SIZE_INFO", line 40
=> line 40 is the call to DBMS_SPACE.OBJECT_DEPENDENT_SEGMENTS
Thank for your help, I'm getting crazy with this, I've been browsing Google & docs for hoors but no answer yet !
create or replace type r_size_info as object (
nb_par_tbl   number ,
nb_idx       number ,
nb_par_idx   number ,
nb_lob       number ,
used_par_tbl number ,
used_idx     number ,
used_par_idx number ,
used_lob     number ,
free_par_tbl number ,
free_idx     number ,
free_par_idx number ,
free_lob     number
+)+
+/+
create or replace type t_size_info as table of r_size_info;
+/+
CREATE OR REPLACE FUNCTION yke_size_info(o_wner varchar2, o_bject varchar2 ) RETURN t_size_info PIPELINED AS
r_size r_size_info := r_size_info(0,0,0,0,0,0,0,0,0,0,0,0);
obj_segment_owner   VARCHAR2(100);
obj_segment_name    VARCHAR2(100);
obj_segment_type    VARCHAR2(100);
obj_tablespace_name VARCHAR2(100);
BEGIN
FOR obj IN (SELECT segment_owner, segment_name, segment_type, tablespace_name FROM TABLE(dbms_space.object_dependent_segments(o_wner, o_bject, NULL, 1)))*
LOOP
If I change that line to hard code the parameter It's working :
FOR obj IN (SELECT segment_owner, segment_name, segment_type, tablespace_name FROM TABLE(dbms_space.object_dependent_segments('SAPSR3', 'REPOSRC', NULL, 1)))
If I turn the function into a procedure it is working :
CREATE OR REPLACE PROCEDURE yke_size_inf(o_wner varchar2, o_bject varchar2 ) AS
obj_segment_owner   VARCHAR2(100);
obj_segment_name    VARCHAR2(100);
obj_segment_type    VARCHAR2(100);
obj_tablespace_name VARCHAR2(100);
BEGIN
FOR obj IN (SELECT segment_owner, segment_name, segment_type, tablespace_name FROM (TABLE(dbms_space.object_dependent_segments (o_wner, o_bject, NULL, 1))))*
LOOP

Not really sure what you are trying to achieve... and putting a pipeline function on top of another pipeline function seems unnecessary to me.
But using the basic code you've shown, the following works fine:
SQL> create or replace type TStrings is table of varchar2(4000);
2 /
Type created.
SQL>
SQL> create or replace function FooPipe( objectName varchar2 ) return TStrings pipelined is
2 begin
3          for r in (
4                  select
5                          segment_owner, segment_name, segment_type, tablespace_name
6                  from    table( dbms_space.object_dependent_segments(USER, objectName , NULL, 1))
7          )
8          loop
9                  pipe row( r.segment_name||' is object('||r.segment_type||') in space('||r.tablespace_name||')' );
10          end loop;
11
12          return;
13 end;
14 /
Function created.
SQL>
SQL> select * from TABLE(FooPipe('TESTTAB'));
COLUMN_VALUE
TESTTAB is object(TABLE) in space(USERS)
SQL>

Please help! AN ERROR OCCERED INSIDE A PLUGIN CONTAINED ON THIS PAGE

i use quicktime 7 and when i click links that would be a video that is quicktime when using aol it pops up with a message saying AN ERROR OCCERED INSIDE A PLUGIN CONTAINED ON THIS PAGE then you click ok then another one pops up saying THE PLUGIN DID NOT INITIALIZE PROPERLY. PLEASE HELP!

The same thing happens to me when I am using Microsoft Internet Explorer 7 on my Gateway (Windows XP Home, SP2, 512 RAM). However, once I get the error message, and open another QuickTime file, the browser displays a "IE has encountered a problem and needs to close," and shuts down MSIE. Please help!
Macbook 1.83 GHz Mac OS X (10.4.7)

PLEASE HELP !! Error: The underlying task reported failure on exit.

Last night, I looked at "Get Info" for the "Macintosh HD"
At the very bottom of the window are listed Permissions, that consisted of (1) Owner, (2) Admin, (3)Everyone.
I had the idea that if I REMOVED "Everyone" by selecting it and hitting "-", I could better secure access to the "Macintosh HD".
Well, now the G5 starts its boot up routine and stalls at the gray screen with pinwheel spinning.
1. I tried purging the P-RAM... no change.
2. I tried doing a "Safe Boot", didn't do anything, couldn't get it to boot up beyond gray screen.
3. Booted up from Leopard CD, and ran "Verify Disk" with the result message that "the volume Macintosh HD appears to be OK"
4. Ran "Repair Disk" with the result message that "the volume Macintosh HD appears to be OK"
5. Tried to run "Verify Permissions" with the result message "Error: The underlying task reported failure on exit. Permission verification complete"
6. Tried to run "Repair Permissions" with the result message "Error: The underlying task reported failure on exit. Permission verification complete"
I assume that my stupidly removing "Everyone" from the permissions list of "Macintosh HD" is the cause.
HELP !!!! IS there an easy way to restore the Permissions to where they were before ????
PLEASE HELP.
THANKS !!!!

I think chmod 1775 sets the sticky bit.
To get more details on what chmod does, do 'man chmod' from the command line. There are man pages for most of the command-line UNIX tools.
BTW, I don't think changing the permissions at the root of the hard drive is the best idea
This is one case where 'repair permissions' might help as well. Once booted into a shell you can do 'sudo diskutil repairpermissions /'

Can Someone please help me with ERROR 4251

I have tried everything! even slowing down the burn speed.
Can someone please help with error 4251 when burning.
I have my diagnostics report done as well.
Thank you to anyone who can help.

I did a quick google search for "iTunes error 4251" and this was the first result.
http://forums.techarena.in/motherboard-processor-ram/1215316.htm
The last post in that forum said a few things.
1.Restart computer
2.Disable anti-virus/security programs
3.Update hardware and software drivers.(I'm guessing mainly the cd-rom drive drivers)
Try those things and see if it is still a problem.
~Bill L.

Please Help! LoadLibrary error

Hi!
Please, HELP! I was tying connect sqldeveloper 1.5.5 to Oracle 11.1.0 on vista.
and got error message
Io Exeption: Network adapter could not establish connection
vendor code 1702
SQLplus and Enterprise Manager are working fine.
Afer tracing listener I foud out that Oracle is looking for oranipc10.dll instead of oranipc11.dll!
listener.trc
sntrf: LoadLibrary on c:\app\Sofia\product\11.1.0\db_2\bin\oranipc10.dll returned error(126)
nsglma: Reporting the following error stack:
TNS-12557: TNS:protocol adapter not loadable
TNS-12560: TNS:protocol adapter error
TNS-00527: Protocol Adapter not loadable
I have two instances on laptop Oracle10 and oracle11 on Vista.
I changed enviroment variabels Oracle_home, Oracle_Sid, Path,
This is new listener
# listener.ora Network Configuration File: c:\app\Sofia\product\11.1.0\db_2\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
PASSWORDS_LISTENER= (EFC258FBCA717041)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl112)
(ORACLE_HOME = c:\app\Sofia\product\11.1.0\db_2)
(SID_NAME = orcl112)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Sofia-PC)(PORT = 1521))
TRACE_LEVEL_LISTENER = SUPPORT
Please, help to finde out what could be the problem.
Thank you, Sofia

Pl see this doc link http://download.oracle.com/docs/cd/E12151_01/doc.150/e12152/intro.htm#CEGGHEFC
I do not have any personal experience with this, but I understand that that 11g install comes with its own release of SQLDeveloper which you will need to use to access 11g database.
HTH
Srini

PLEASE HELP MUVO N200 ERROR EVERY TIME I TRY AND DOWNLOAD A SONG

hi every time i try and download a song it says error. i put it into recovery mode and it fixes it but i have to unload all the songs off and then start again but the same thing happens again and sometimes i don't even know if my player goes into recovery mode because my computer doesn't detect it. is there anything i can do about the error every time i try an ddownload a song? please help i am relly frustrated!!

"Download" as in from LimeWire or some such program? Or loading your player with songs.
If it's from LimeWire, the song file is probably corrupted.
If it's loading your player with songs, either you haven't installed the player's corresponding driver correctly, or something's happened to corrupt your firmware.
Try downloading the firmware from Creative and re-loading it onto your player. Very easy to do.
If that doesn't fix anything, try uninstalling and then re-installing the Creative MuVo N200 driver onto your computer. Get somebody that <EM>really</EM> knows what they're doing to help you.

Please help with cfscript error!

When I run my app, I got this error:
sdfst_catcherror is recording this error: Context validation
error for tag cfscript.; The start tag must have a matching end
tag. An explicit end tag can be provided by adding
</cfscript>. If the body of the tag is empty you can use the
shortcut <cfscript .../>.
The CFML compiler was processing:
a cfscript tag beginning on line 45, column 4.
a cfscript tag beginning on line 45, column 4.
When I checked my codes, all the
<cfscript></cfscript> have the pairs. There are only 2
pairs of <cfscript</cfscript> in this template.
See my code structure below:

<cfscript>
function getTRS(var5)
some codes here...
return TRS;
</cfscript>
<cffunction name="FrmTxt" returntype="Struct">
<cfargument name="EmpCodes" required="true"
type="array">
<cfargument name="EmpID" required="true"
type="numeric">
<cfquery name="GetEmpInfo>
Select * from......
</cfquery>
<cfset varFrms = GetEmpInfo.EmpCodes>
<cfset A_Key = 1>
<cfset structFrmTxt = StructNew()>

<cfscript>
Some codes here....
Need to output #TRS# returned by getTRS(var5) set above
</cfscript>
<cfreturn structFrmTxt>
</cffunction>
From other CF forum I learned that I can't put getTRS(var5)
within the second <cfscript></cfscript> within
<CFFUNCTION> pair
it says "You can't put UDF within UDF or method within
method". When I did originally, I got this error:
Unable to complete CFML to Java translation, Error
information unsupported statement: class
coldfusion.compiler.ASTfunctionDefinition
I'm stuck and can't find any resources to solve this problem
anymore, please help!....

When I checked my codes, all the
<cfscript></cfscript> have the pairs.
This error can often mean that you did not properly end a
previous code
block or line. So the closing </cfscript> is being
considered part of
that unclosed code. For me, it is often a missing semi-colon
[;] on the
last line I wrote, missing a closing curly bracket [}] could
do it as well.
Check your code, this is seldom more then missing a bit of
syntax.

Please help.. ERROR ERROR :(

Please help.. i am getting this type of error after installing cs6 Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 5 error(s) ----------- Payload: Microsoft_VC90_CRT_x86 1.0.0.0 {08D2E121-7F6A-43EB-97FD-629B44903403} ----------- ERROR: Error 1310.Error writing to file: msvcm90.dll. Verify that you have access to that directory. ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1310.Error writing to file: msvcm90.dll. Verify that you have access to that directory. ERROR: Third party payload installer Microsoft_VC90_CRT_x86.msi failed with exit code: 1603 ----------- Payload: PDF Settings CS6 11.0.0.0 {7E91BB17-16A1-42CE-9502-D6C98BE04920} ----------- ERROR: Install MSI payload failed with error: 1620 - This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package. MSI Error message: ERROR: Third party payload installer AdobePDFSettings11-mul.msi failed with exit code: 1620

Kartikay_Sharma wrote:
moOdY_gUY143,
Welcome to Adobe Community.
Seems like that there are couple of issues that the installer is facing . I would request you to try the following .
1) Check for the antivirus installed on the computer and disable that along with any firewall/anti-spyware.
2) Check if you are the Admin on the system or not . if not , please try to login with Admin rights and then start the installation .
Please do let us know if this helps.
Regards,
Karitkay Sharma
No.. it didn't help in my problem
Still problem presist.. plss help

Please help understand this error...

I am developing a small Hash Calculator that calculates MD5/ SHA Hash.
It has 2 modes,
1. Text mode in which i have a JTextField - userText where i can enter the text and then when i click on calculate the corresponding hash of the text is evaluated.
2. File mode in which then the JTextField gets disabled (locked or non editable) and i have button that gets visible through which i can then select a file (through JFileChooser) and when i select a file, i put it's absolute path in the JTextField - userText. and then when i click on calculate this code is run...
FileInputStream in=new FileInputStream(userText.getText());
                         int length=0;
                         while((length=in.read(buffer))!=-1)
                              md5.update(buffer,0,length);
                         digest=md5.digest();
                         hex="";
                         for (int i = 0; i < digest.length; i++)
                              int b = digest[i] & 0xff;
                              if (Integer.toHexString(b).length() == 1) hex = hex + "0";
                              hex = hex + Integer.toHexString(b);
                         hash.setText(algorithm.getSelectedItem().toString()+" Hash: "+hex);
                         copyString(hex);
                         status.setText(algorithm.getSelectedItem().toString()+" Hash copied to ClipBoard",Color.RED);
                         in.close();Now what i am getting is that in case i calculate a hash of a text (default starting mode is text mode) and then change the mode to File then it is working absolutely fine, but if right in the beginning, at the starting i go and select the File Mode, then when i click on calculate i get a strange error.
I have the stack trace of it :
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
     at java.io.FileInputStream.read(Unknown Source)
     at MD5HashCalculator.calculate(MD5HashCalculator.java:371)
     at MD5HashCalculator.access$3(MD5HashCalculator.java:338)
     at MD5HashCalculator$12.actionPerformed(MD5HashCalculator.java:280)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)This weird thing is happening only the first time and it is happening in the line of the while loop basically
while((length=in.read(buffer))!=-1)I am unable to understand the error, please help.
What exactly is happening , and more specifically , why is it happening only if i did the mode change right in the beginning for the first time...??

this buffer since it had a null value was giving the
error. I replaced the thing by
byte buffer[]="".getBytes();
I'm not sure that's the best thing to do.
I was reluctant at first to initialise the buffer
with some bytes as i thought it might effect the md5
value if it had some value in the beginning, You're supposed to create an empty byte array, e.g. like so:
byte[] buffer = new byte[1024];In this case, the read method will read at most 1024 bytes into the buffer. The number of bytes it actually reads is returned to you. If it returns 12, say, you should only use the 12 first bytes in the array since those are the bytes that were actually read in. Whatever was in those 12 slots in the array before you called read is overwritten. Then you call read again to see if there are more bytes available, until it returns -1 to signal that there is nothing more to read.
but i
have re-checked it accurately, the code is now
working fine and the MD5 has is coming perfectly.
This seems strange, as
"".getBytes();returns a byte array of zero length, which to me suggests you would end up in an infinite loop. But if you say so...

Please, help me. Licensing error

Similar Messages

Maybe you are looking for