Please Help: SAX-RPC Problem(Web services Problem)
Hi ,
I am getting error while run the client for StaticStub (SAX-RPC).
Errors:
Please tell me what is the solution
Exception in thread "main" java.lang.NoSuchMethodError
at com.sun.xml.rpc.encoding.simpletype.XSDDateTimeDateEncoder.<clinit>(X
SDDateTimeDateEncoder.java:195)
at com.sun.xml.rpc.encoding.soap.StandardSOAPTypeMappings.<init>(Standar
dSOAPTypeMappings.java:563)
at com.sun.xml.rpc.encoding.StandardTypeMappings.getSoap(StandardTypeMap
pings.java:32)
at com.sun.xml.rpc.client.BasicService.createSoapMappings(BasicService.j
ava:230)
at com.sun.xml.rpc.client.BasicService.createStandardTypeMappingRegistry
(BasicService.java:202)
at sstub.MyFirstService_SerializerRegistry.getRegistry(MyFirstService_Se
rializerRegistry.java:25)
at sstub.MyFirstService_Impl.<init>(MyFirstService_Impl.java:25)
at sstub.MathClient.createProxy(MathClient.java:31)
at sstub.MathClient.main(MathClient.java:12)
I had the same error. It was caused in my case by using an incorrect version of Java.
I was using JWSDP 1.5 with Java 1.3.1 - I consulted the JWSDP documentation and discovered that it had only been tested with Java 1.4.2 +
I switched to Java 1.4.2 and the problem was solved.
Similar Messages
-
HT5312 i forgot my secret question, please help me this problem. Thanks
I forgot my secret question, please help me this problem. Thanks
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
And/or see the More Like This section on the right. -
My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M. -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
Please help with slideshow problems!
Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
ThanksThanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
> -
Hi,
Has anyone tried (and maybe succeeded) in accessing an
RPC-style Web Service deployed on WebLogic Server 6.1 using
SSL? I have a Web Service deployed and am able to access it using JNDI and the
weblogic.soap.http.SoapInitialContextFactory
INITIAL_CONTEXT_FACTORY. However, when I try to set the
Context.SECURITY_PROTOCOL to "ssl" and access the secure port,
I get a "java.net.SocketException: Unexpected end of file from
the server" error message.
Does the weblogic.soap.http.SoapInitialContextFactory not
support SSL? Do I need to do the SOAP/XML messaging myself,
without being able to make use of the WebLogic convenience
classes? Thanks! RobAlright!
Glad you got it working ;-)
Actually, the problem with the protocol being hardcoded to http in the wsdl.jsp,
is a bit strange. It's unusual that the BEA engineers that coded the wsgen component
and support classes, didn't use something like the following:
<soap:address location="<%= request.getScheme() + "://" + request.getServerName()
+ ":" + request.getServerPort() %>/security/examples/webservices/security/PhoneBookService"/>
I don't use wsgen too much, because I need to have more control over the J2EE
packaging. It (wsgen) is great for spitting out stuff, but not really setup for
doing Web service packaging that use classes (i.e. helper files, frameworks, etc.)
that it doesn't generate. I think they (BEA) might be looking into integrating
the Web Services assembly process with other tools like WebGain, Forte, etc. to
alleviate these types of issues.
Anyway, glad you got it working, so now you can help somebody else (time permitting,
of course) with this topic in the future!
Regards,
Mike Wooten
"Rob Nelson" <[email protected]> wrote:
>
Mike,
Thank you very much for your response! The next to
last sentence did it for me (when you mentioned checking
that the location attribute of the soap:address element
was set properly)! I noticed that when I viewed the WSDL
file via the browser (by clicking on the link in the
index.html page), I saw http://host:<unsecure_port> when
I requested it over the unsecure port, but I saw
http://host:<secure_port> when I requested the WSDL over
the secure port. Notice it did not say https!
So, I unjarred the EAR file that was generated by my
wsgen task, and then unjarred the generated WAR file
contained therein. When I looked at wsdl.jsp, I noticed
that "http" was hard-coded in the location attribute, but
that the host name and port number were dynamically
generated. So I added a scriplet to dynamically place an
"s" after "http" (if request.isSecure()) and rejarred up
the WAR and EAR files.
Now when I deployed the EAR file, I see "https" when
I request the WSDL over the secure port, and my client
(actually your client;) works! Awesome! I really appreciate
your help! Now my only issue is why did the wsdl.jsp have
"http" hard-coded, not accounting for secure requests.
These files were generated by the WSGEN task in ANT.
I figure it's either: I have a configuration problem,
I have a problem with my ANT build script, my version of
WebLogic Server (6.1 w/SP1 built 9/18/2001) has a bug, or
maybe you just have to manually go in and modify the wsdl.jsp
file if you want to use https :(. Please let me know if
you have any insight on this, and I will also follow up
with WebLogic support. Thanks again! Rob
"Michael Wooten" <[email protected]> wrote:
Hi Rob,
I am absolutely sure the code I posted works, so we need to approach
this from
a different angle ;-)
First, I know why the Context.SECURITY_PROTOCOL approach doesn't works.
It's because
the namespace in the Web Services code examples is not the same oneas
the one
used for RMI objects, EJBs, JDBC Data Sources, etc. For those objects,
the Context.PROVIDER_URL
is something like "t3://localhost:7001", and the INITIAL_CONTEXT_FACTORY
is "weblogic.jndi.WLInitialContextFactory".
The one being used with WebLogic Web Services, is mainly just functioning
as a
mechanism for manufacturing WebServiceProxy objects, because it is a
non-instanciable!
It does this by using a subclass of javax.naming.Context called SOAPContext,
which
is completely hidden from you, but also doesn't do much except implement
the lookup()
method. The implementation of this method ignores the Context.SECURITY_URL
property,
but it does pay attention to the "java.naming.security.principal" and
"java.naming.security.credentials"
properties. You don't need these properties for SSL, just Basic Authentication.
Enough about that, though. The service end-point is a servlet right?
So this means
it has a URL that begins with http or https, which in turn means the
WebLogic
servlet engine gets the SOAP request and sends it to the StatelessSessionAdapter
servlet. To WLS, this is just like any other HTTP/HTTPS request sent
to it ;-)
There is no special "SOAP-related" HTTP/HTTPS handler in WLS, but the
SSL challenge
dance still happens. So my first question is, are you sure you havethe
HTTPS
attributes set properly in the WebLogic console. SSL/HTTPS should be
enabled and
the "Hostname Verification Ignored" checkbox should be checked. Next,
are you
sure the URL assigned to the location attribute of the <service> element
in the
WSDL is correct (i.e. https://localhost:7002)? Are you using the "dynamic
client"
approach?
Regards,
Mike Wooten
"Rob Nelson" <[email protected]> wrote:
Mike,
Thanks for your response. I downloaded the code example that
you
posted
last week, as well as the code example that you posted in October for
a similar
request (BEA Support pointed me towards that). Unfortunately, I still
can't get
the Web Service to respond to the client request when the client uses
the HTTPS
port for the WebLogic Server.
I tried two different client approaches. The first uses the client
code
that you posted in October, the WebServiceProxy approach. The second
approach
is based on the example in the WebLogic documentation, which uses the
weblogic.soap.SoapInitialContextFactory
class with the javax.naming.Context object to perform a lookup on the
service
(which closely resembles rmi without the narrowing).
Both client classes fail to invoke the the service itself viaHTTPS
(although
they both work when making HTTP requests to the unsecure port). However,
when
I run the client based on the client class that you posted in October
and make
an HTTPS request, I can see in the output where it is able to download
the WSDL
file and use it (via the WebServiceProxy) to describe the availablemethods
for
the associated Web Service. It is only when the actual invoke() method
is called
on the SoapMethod object (which in turn sends the XML request to the
Web Service
Servlet), that the server doesn't respond, and the client fails with
an UnexpectedEndOfFileException
(i.e. no response).
So, do you know why the servlet that the RPC-style Web Serviceuses
to handle
requests would not respond to HTTPS requests, when it processes HTTP
requests
without a problem (using the same client code that fails with the HTTPS
request)?
I am using WebLogic Server 6.1 w/SP1 on a Solaris 8 platform. Thanks
for any
advice you can give me! Rob
"Michael Wooten" <[email protected]> wrote:
Hi Rob,
Check out the attached zip for "insights" into how to do this. It
contains
the
code for two Web service "consumers" (that the new fangled word fora
"client")
and the web.xml and weblogic.xml for the RPC-style Web Service, that
they consume.
Hope this helps,
Mike Wooten
"Rob Nelson" <[email protected]> wrote:
Hi,
Has anyone tried (and maybe succeeded) in accessing an
RPC-style Web Service deployed on WebLogic Server 6.1 using
SSL? I have a Web Service deployed and am able to access it using
JNDI
and the
weblogic.soap.http.SoapInitialContextFactory
INITIAL_CONTEXT_FACTORY. However, when I try to set the
Context.SECURITY_PROTOCOL to "ssl" and access the secure port,
I get a "java.net.SocketException: Unexpected end of file from
the server" error message.
Does the weblogic.soap.http.SoapInitialContextFactory not
support SSL? Do I need to do the SOAP/XML messaging myself,
without being able to make use of the WebLogic convenience
classes? Thanks! Rob -
hi,
i am new to web service technology. i want to create dynamic web service client for a "rpc" style web service in Netbeans.
please, can anybody guide me for this?
thanks in advance.Hi,
To avoid creating new topic I will put my question here.
I try to create new web service (rpc-style) client in netbeans. I have rpc plugin installed. In ejb module node I right click > new > web service client >
I fill all filds, chose rpc-style and > after clicking finish - error occur:java.lang.LinkageError: com/sun/xml/rpc/processor/generator/Names
at org.netbeans.modules.websvc.registry.util.Util.getParameterType(Util.java:856)
at org.netbeans.modules.websvc.registry.jaxrpc.WrapperClientWriter.printOperations(WrapperClientWriter.java:275)
at org.netbeans.modules.websvc.registry.jaxrpc.WrapperClientWriter.writeClass(WrapperClientWriter.java:219)
at org.netbeans.modules.websvc.registry.jaxrpc.Wsdl2Java.createWrapperClients(Wsdl2Java.java:305)
at org.netbeans.modules.websvc.registry.jaxrpc.Wsdl2Java.execute(Wsdl2Java.java:229)
at org.netbeans.modules.websvc.registry.util.Util.createWSJar(Util.java:493)
at org.netbeans.modules.websvc.registry.RegistryViewImpl.registerService(RegistryViewImpl.java:221)
at org.netbeans.modules.websvc.registry.RegistryViewImpl.registerService(RegistryViewImpl.java:159)
at org.netbeans.modules.websvc.registry.netbeans.RegisterViewImplNetBeansSide.registerService(RegisterViewImplNetBeansSide.java:91)
at org.netbeans.modules.websvc.jaxrpc.client.wizard.ClientBuilder.generate(ClientBuilder.java:330)
at org.netbeans.modules.websvc.jaxrpc.client.wizard.JaxRpcClientCreator$2.run(JaxRpcClientCreator.java:319)
at org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:572)
[catch] at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:997)
I use netbeans 6.5. In my project I choose java ee 5 as in 1.4 there is no web service client option
Any ideas?
I found some rpc tutorils for netbeans 4.0 but I wonder why it couldn't be done in netbean 6.5
Regards,
Lech -
Need help with DOC type web service
hi,
I am trying to write a simple message style ( doc type ) web service but no success so far. I have tried to search for examples but no use. I already implemented some simple RPC style web services like calculator etc and able to use them. I am more interested in the DOC type ( which sends SOAP message and receives SOAP message back). Can Anybody give me an example for implementing this type of service ( very-simple say HellowWorld ) or point me to some website . I am not able to generate the response envelope. I can write the client program which will send a SOAP Envelope to this services with one parameter NAME and the services should return Hello Name but in a SOAP envelope form. I can create a SOAP message in this Client using SOAPConnection and MessageFactory etc. Your help will be really appreciated. There is very little stuff about webservices on the internet as well on this forum.
Thanks
VinodHello kwilding2,
Thanks for the quick response and pointing to some useful websites. I downloaded the code from web service essentials BUT all the examples are using SOAP RPC calls. They create a call object and call one of the service methods and a response is returned. I am little confused about this stuff. I am looking for something which returns the response in a SOAP envelope for which i think i need to use JAXM API which I already have downloaded. I have created a client which composes a SOAP envelope using SOAPConnection and other MessageFactory classes etc and can send this SOAP envelope to a web service. In return I want the web service to give the SOAP envelope.
I have gone thru xmethods.net and picked the following stock quote request and response:
Sample Request envelope:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Body>
<ns1:getQuote xmlns:ns1="urn:xmethods-delayed-quotes" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<symbol xsi:type="xsd:string">IBM</symbol>
</ns1:getQuote>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Sample Response Envelope:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Body>
<ns1:getQuoteResponse xmlns:ns1="urn:xmethods-delayed-quotes" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<return xsi:type="xsd:float">133.625</return>
</ns1:getQuoteResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I also want the things in this order. This webservice at xmethods just returns the price for a stock, so how they say it returns this Response Envelope. Is this Envelope something implied. I am getting more confused.
any help will be appreciated.
Thanks
Vinod -
Retrieving client ip from RPC-style web service
Hi,
I've got an rpc-style web service and I would like to log the incoming client
ip address (i.e. I need to get at the HTTPRequest object). Can this be done by
passing some kind of SOAP context parameter in the argument list of my exposed
methods? If this is not doable, is implementing SOAP message handlers the way
to to go? I would rather not do the latter, as the web service is working well
and don't want to play with my code too much.
ThanksI tried this, following the example in http://e-docs.bea.com/wls/docs70/webapp/filters.html,
but I still can't get it to work. The init() method gets called, but doFilter(ServletRequest
req, ServletResponse resp, FilterChain fc) does not. The "filter" part of my
web.xml looks like:
<filter>
<filter-name>serviceFilter</filter-name>
<filter-class>webservices.ServiceFilterImpl</filter-class>
</filter>
<filter-mapping>
<filter-name>serviceFilter</filter-name>
<url-pattern>/myPattern/myWebService</url-pattern>
</filter-mapping>
The only thing I could thing of is that maybe my url-pattern is wrong, although
this seems unlikely as my web service is able to process requests sent using
http://myWLSMachine:7001/myPattern/myWebService.
In fact, in the the WLS access.log file, I have:
[07/Oct/2002:11:51:01 -0400] "POST /myPattern/myWebService HTTP/1.0" 200 3011.
Do you know if there's something in the JAX-RPC API that I could use to get at
the client ip address? I dug through the documentation and came across something
called "ServletEndpointContext", but I'm not sure if this will do the trick.
Thanks for your time,
Danielle
"manoj cheenath" <[email protected]> wrote:
One way to do this may be to write a servlet filter
and map the filter to the URL of your service.
regards,
-manoj
"Danielle Vella" <[email protected]> wrote in message
news:[email protected]..
Hi,
I've got an rpc-style web service and I would like to log the incomingclient
ip address (i.e. I need to get at the HTTPRequest object). Can thisbe
done by
passing some kind of SOAP context parameter in the argument list ofmy
exposed
methods? If this is not doable, is implementing SOAP message handlersthe
way
to to go? I would rather not do the latter, as the web service isworking
well
and don't want to play with my code too much.
Thanks -
In the tutorial
Access J2EE 1.4 JAX-RPC Java Web Services from Web Clients
http://www.oracle.com/technology/products/jdev/101/howtos/jaxrpc/java14_ws_web_clients.html#creating_web_service
A MyWebService1SEI.java interface is also required to be added to generate a JAX-RPC Web service.The MyWebService1SEI.java interface does not get generated as indicated in the tutorial.
If the Web service is generated with
File>New>Business Tier>Java Web Service with the
Autogenerate Service Endpoint Interface checkbox selected,
the MyWebService1SEI.java interface does not get generated.
The Autogenerate Service Endpoint Interface feature does not autogenerate java interface. -
Q<RPCC-21> Can you compare a performance of "usual" RPC from EJB and RPC from Web
Services?
A<RPCC-21> There are additional performance overheads for invoking a web service
when compared to straight EJB invocation. However, you should not think of web
services as a way to replace your EJBs instead you should be willing to accept
some performance decline for the massive gains in platform interoperability and
the ability to exposure your services outside of you firewall.
Additionally, performance decreases will be dependent on several factors. The
most significant of which is the XML-Java and Java-XML translation of the SOAP
message. This can be very fast if the XML structure is simple but if you web services
requires a parameter that has a complex XML format you may see a more significant
slow down.
AdamSorry if this sounds like I am new to this but I am.
So, the extended version is the format that would be used if you were not utilizing the files that the wsdl2java function creates?
And this is done to when you want more flexibiility for the user to call your service?
So, you would push to have the stub files used when you want to control how the web service is used?
thanks for the feedback. -
Can XI handle RPC based web services ?
Is it possible with XI 3.0 to work with RPC based webservices rather than Document based services.
If it can, can some one send me sample configuration for SOAP Receiver and SOAP Sender.
I have successfully configured an SOAP Receiver to access external web service on internet which is a document based but I am having difficulty in accessing rpc based webservice on intranet.
We are on XI 3.0 SP 14. Appreciate your comments on this topic.
Thanks
PrasadHi John!
> Is using RPC style web services supported out of the
> box within XI? I have read some forums that suggest
> only document style are and would like a definitive
> answer.
I have opened an OSS message regarding this topic and I was told that RPC-style Web Services are not supported within the XI SOAP adapter. Our current workaround which adds the missing Web Service operation using an additional XSLT mapping is not sufficient. Instead we have to change our WSDL from RPC-style into document-literal style.
Regards, Tanja -
PLEASE HELP.. PROBLEM WITH RESTORE
okey, well i have this huge problem. i got my ipod 2 weeks ago from the US, i live in poland and not many people know how these things work so i ask that someone here can help me..
a week ago.. the ipod froze my computer, i could do nothing with it. so i had to restart it.the problem was that my ipod was connected to the computer still.. but my comp wouldnt start so i had to disconnect the ipod.(yes the DO NOT DISCONNECT icon was on the ipod.. but wut else could i do?)
so my ipod froze then, and i had the apple icon the whole time on the screen, so i tried everything, i get so frustrated with the ipod that i just want to throw it out the window. i read some things about the problem on the suppoort page, i reset it about a hundred times.. and finally it started working when i got it into disc mode. Yes i got all happy.. I press the restore buttons in itunes.. and this is what happens.. the ( i dont know how to call it) scroll bar? well the green bar that moves to show that its 'restoring' it freezes in the middle of the process, i uninstalled itunes 10 times.. i even tried restoring on 2 other computers, on one of them it does the same thing and on the other theres some other problem.
PLEASE HELP ME!! I DONT know what to do.
ipod 5th gen 30gb Windows XP____________________16.06V16, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
Otwarty kontroler hosta PCI do USB SiS 7001, Magistrala PCI 0, urządzenie 2, funkcja 2. Device is working properly.
No IEEE 1394 Host Controller found.
The last connected iPod serial number: ****.
The iPod Service Logging Information:
[SERVICE: 0xB20,22:06:21 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Mon Nov 20 22:06:21 2006)
[SERVICE: 0xB20,22:06:21 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0xB2C,22:06:22 INFO] Timed out... Starting device manager!
[SERVICE: 0xB54,22:06:22 INFO] Listener Window created
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:34 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:34 INFO] device \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:34 INFO] device is an iPod
[SERVICE: 0xB54,22:07:34 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:34 INFO] [-1] set waiting to mount = 1
[SERVICE: 0xB54,22:07:34 INFO] [1] Assigning session 0
[SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0xB54,22:07:34 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:34 INFO] [1] input #0 from src #0
[SERVICE: 0xB44,22:07:34 INFO] [1] input #0
[SERVICE: 0xB44,22:07:34 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:07:34 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:07:38 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:38 INFO] [1] input #1 from src #0
[SERVICE: 0xB48,22:07:38 INFO] [1] input #1
[SERVICE: 0xB48,22:07:38 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:07:38 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\G:
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB54,22:07:39 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB54,22:07:39 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\F:
[SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\E:
[SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\D:
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x0 partition 0x2
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:47 INFO] [VolumeArrive] mask = 0x40
[SERVICE: 0xB54,22:07:47 INFO] looking up device # for \\.\G:
[SERVICE: 0xB54,22:07:47 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB54,22:07:47 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB54,22:07:47 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB54,22:07:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:47 INFO] [1] input #2 from src #0
[SERVICE: 0xB4C,22:07:47 INFO] [1] input #2
[SERVICE: 0xB4C,22:07:47 INFO] [MACHINE 1 INPUT #2] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:07:47 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB50,22:07:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB50,22:07:51 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0xB50,22:07:51 INFO] [1] set waiting to mount = 1
[SERVICE: 0xB50,22:07:51 INFO] [1] input #3 from src #0
[SERVICE: 0xB44,22:07:51 INFO] [1] input #3
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 INPUT #3] - (HDW) Interface Arrival
[SERVICE: 0xB44,22:07:51 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
[SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xB44,22:07:51 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xB50,22:07:52 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0xB50,22:07:52 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\G:
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB50,22:07:52 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB50,22:07:52 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB50,22:07:52 INFO] [1] input #4 from src #0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\F:
[SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\E:
[SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\D:
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x0 partition 0x2
[SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB44,22:07:53 INFO] VendorId: Apple
[SERVICE: 0xB44,22:07:53 INFO] ProductId: iPod
[SERVICE: 0xB44,22:07:53 INFO] revision: 1.62
[SERVICE: 0xB44,22:07:53 INFO] vendor bytes:
[SERVICE: 0xB44,22:07:53 INFO] 02 01 00 00 00 00 00 00 00 0B 00 11 91 00 00 00 00 00 00 00
[SERVICE: 0xB44,22:07:53 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xB44,22:07:53 INFO] [1] Power State: Powered
[SERVICE: 0xB44,22:07:53 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xB44,22:08:01 ERROR] Did not find first letter of stage
[SERVICE: 0xB44,22:08:01 INFO] got HotPlugState 0
[SERVICE: 0xB44,22:08:01 INFO] [1] serial number 000A270015BEEE43
[SERVICE: 0xB44,22:08:01 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0xB44,22:08:01 INFO] [1] input #4
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 INPUT #4] - (HDW) Volume Mount
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xB44,22:08:01 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:13 ERROR] Did not find first letter of stage
[SERVICE: 0xB44,22:08:13 INFO] got HotPlugState 0
[SERVICE: 0xB44,22:08:17 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xB44,22:08:17 INFO] [1] ===== iPod with Video =====
[SERVICE: 0xB44,22:08:17 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:17 INFO] [1] iPod needs formatting...
[SERVICE: 0xB44,22:08:17 INFO] 22:8:17, year 2006, day of yr. 323, GMT offset 4 isDST 0
[SERVICE: 0xB44,22:08:17 INFO] [1] Perform launch updater check.
[SERVICE: 0xB44,22:08:17 INFO] [1] iTunes located at 'D:\iTunes.exe'
[SERVICE: 0xB44,22:08:17 INFO] [1] progress is now 0
[SERVICE: 0xB44,22:08:17 INFO] [1] *** MOUNT FAILED - Non-FAT32 device, device session 0
[SERVICE: 0xB34,22:08:57 INFO] <0x4> Got Serial #
[SERVICE: 0xBD0,22:09:01 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xBD0,22:09:01 INFO] <0x4> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:01 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD04,22:09:01 INFO] Mounted
[SERVICE: 0xD04,22:09:01 INFO] [1] already mounted!
[SERVICE: 0xD04,22:09:01 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xB34,22:09:03 ERROR] ERROR, mount lock count is 0 but device is not mounted
[SERVICE: 0xBD0,22:09:07 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xBD0,22:09:07 INFO] <0x4> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:16 INFO] <0x1> Got Serial #
[SERVICE: 0xB34,22:09:16 INFO] <0x1> Got Serial #
[SERVICE: 0xB34,22:09:20 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xB34,22:09:20 INFO] <0x1> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:22 INFO] <0x1> Got Serial #
[SERVICE: 0xBD0,22:09:22 INFO] API is now LOCKED!!!
[SERVICE: 0xB54,22:11:15 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:11:15 INFO] [1] input #5 from src #0
[SERVICE: 0xB48,22:11:15 INFO] [1] input #5
[SERVICE: 0xB48,22:11:15 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:11:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:12:22 INFO] [1] input #6 from src #0
[SERVICE: 0xB4C,22:12:22 INFO] [1] input #6
[SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:12:22 INFO] [1] input #7 from src #0
[SERVICE: 0xB44,22:12:22 INFO] [1] input #7
[SERVICE: 0xB4C,22:12:22 INFO] [MACHINE 1 INPUT #6] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:12:22 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:18:13 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:18:13 INFO] [1] input #8 from src #0
[SERVICE: 0xB48,22:18:13 INFO] [1] input #8
[SERVICE: 0xB48,22:18:13 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:18:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:21:48 INFO] [1] input #9 from src #0
[SERVICE: 0xB4C,22:21:48 INFO] [1] input #9
[SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:21:48 INFO] [1] input #10 from src #0
[SERVICE: 0xB44,22:21:48 INFO] [1] input #10
[SERVICE: 0xB4C,22:21:48 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:21:48 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:44:23 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:44:23 INFO] [1] input #11 from src #0
[SERVICE: 0xB48,22:44:23 INFO] [1] input #11
[SERVICE: 0xB48,22:44:24 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:44:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:52:27 INFO] [VolumeRemoved] existing mask 0x40, arrive mask 0x20
[SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:52:47 INFO] [1] input #12 from src #0
[SERVICE: 0xB4C,22:52:47 INFO] [1] input #12
[SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:52:47 INFO] [1] input #13 from src #0
[SERVICE: 0xB44,22:52:47 INFO] [1] input #13
[SERVICE: 0xB4C,22:52:47 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:52:48 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:52:49 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0xB54,22:52:49 INFO] looking up device # for \\.\F:
[SERVICE: 0xB54,22:52:49 INFO] type 0x2 drive 0x1 partition 0xffffffff
Windows XP
well i clicked help.. and that didnt do anything either.. ;/ -
Please help, color printing problems.
I have snow leopard and just bought a new HP officejet 7500 wide format wireless all-in-one. The problem is when I Print from my boyfriend's PC, the pictures are fine but when I print from my imac, the image I see on the monitor isn't what is printed. The colors are off and the picture is way too dark. I've looked on the internet to try to find a solution but haven't really found one. Please help.
Hello
Driver from HP web site
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-86352-1 &cc=us&dlc=en&lc=en&os=219&product=4083652&sw_lang=
instruction for configurationn and use
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&tmp_task=setupCate gory&cc=us&dlc=en&lc=en&os=219&product=4083652&softwareitem=mp-86352-1&sw_lang=# N28
HP printer listing for os 10.6 support is not that clear but "HP Officejet Pro L7500 series" in on the list so you may not need to download driver from hp but only from apple
HTH
Pierre -
Please help with AcroIEHelper problem
Hello,
I had perfectly running laptop. Now, with no reason every time I turn on my laptop I get a messege that Windows Installer is preparing to install something. Then Installer asks me to insert a disc with Adobe Acrobat 7.0 Pro. When I insert the disc installer tells me that it can not access a file. Exactly:
Adobe Acrobat 7.1.0 Professional
Error 1304: Error writing to file C:\Program Files\Adobe\Acrobat 7.0\ActiveX\AcroIEHelper.dll.
Verify that you have access to that directory.
I checked that directory and did not find such file. Sometimes, this messege appears when I try to open C: or folders on my Desktop but not always. Once it showed up when I tryed to start IE. Ater I uninstalled Adobe Acrobat this messege stopped showing up. But when I reinstalled Adobe Acrobat it started again.
I have tryed almost every anti-malware I could find - McAfee, Spybot, Spyware Doctor, Malwarebyte's Anti-Malware, Superantispyware, AVG 8.5, Dr. Web - all these programms I ran in both normal and safe modes. I even went to BIOS Setup and returned to factory settings. Nothing helped. I went to malware forum and people did not find any malware in my logs.
Then, I installed WinPatrol that seems to be able managing startup programs. After I desabled SC-Acrobat.exe and Adobe Gamma Loader I do not have this annoying Windows Installer for Adobe Acrobat warning any more when Windows starts. But it still shows up often, but not always when I open C: or folders on my Desktop. I have Windows Vista Home.
So could you please help me with this problem? Thank you.MamaDragonBoy wrote:
It's already set to "mixed" wireless b and g... should I try setting it to all g? Both my laptop and my husband's are "g"
setting it to g certainly wont hurt anything.
Maybe you are looking for
-
Need Your suggestion on Performance Management
Hi All When Creating objectives it can be linked different criterian.But Whati would need to know can this be linked based on Person wise Department Band Can objectives be mapped to One - Many Many - one relations !! Employee /Manager should have an
-
Microsoft Remote Desktop displaying "Connection Reset by Peer"
Server Side Configuration: RDS Gateway Server: MS Server 2008 R2 RDS Web Server: MS Server 2012 R2 Standard RDS Server: MS Server 2008 R2 Client Side Configurations: Dell OptiPlex 9020: MS Windows 7 Enterprise with MS RDC [will refer to as DELL] Appl
-
How to fix low quality icons in dock?
I know it's been around for a while but I still didn't find any solution. My problem is that any new icons that appears in my dock are low quality only. Even if it's native Apple app like Pages... Any solution how to permanently fix this issue?
-
Each time I create a Text Frame it appears colored with black?
Every time I create a Text Frame with the Type tool in InDesing CS5.5 in a document named "02_End.indd", (this happen only for this file) the it appears filled with black color. On the other documents this does not happen (the text frames are with no
-
Is it possible to get and Set attribute value in OVD through JNDI or Java
Hi, I have a requirement to read an OVD Attribute value from a Jsp Page and set the Attribute value in OVD. Is it possible to achieve it through JAVA/JNDI code, Any pointers or code snipplet are welcome. Thanks Ak