Please help(Very Urgent)

Hi,
Iam facing with one problem I can upload file upto 40mb by running my swing interface(java -Xmx256m ActionDemo4).If I select above 40mb size of file then it giving me Error on Dos-Prompt(java.lang.OutOfMemory).Now I increase jvm memory by
(-Xmx540m)then my swing Interface run perfectly but when I select file size above 40mb then my machine hanged(Then It is not giving me Error on Dos-prompt) and giving me Error by system[your system running on low virtual machine.Plz close some application or add additional paging file or increase size of paging file of virtual memory]. My machine spesification:-
Operating system:-winNT4.0(Service Pack4.0)
Ram:-256mb
Processor:-Pentium-3
Hard-disk:-20GB
I try to configure my machine like that:-
Settings-Control Panel-System-Performance-VirtualMemory:-I changed in
1.Paging File size for selected Drive:-
Drive C:
Space Available: 834MB
Initial Size: 256MB
Maximum Size: 306MB
Drive D:
Space Available: 7870MB
Initial Size: 14MB
Maximum Size: 14MB
2.Total paging file for all Drives:-
Minimum Allocated: 2MB
Recommened: 267MB
Currently Allocated: 270MB
3.Registry Size:-
Current Registry Size: 13MB
Maximum Registry size: 60MB
But I couldn't slove my Problem.Plz Guide me How I can slove my problem.Excepting Quick Reply.
With Best Regards
Bikash

Increase your virtual paging memory to about 512m. This will give you a total of 768m.
This is accessed via control panel->system->performance on NT. Other windows boxes vary slightly.

Similar Messages

Problem with Accessing Deployed Servlets Please help, very urgent.

Inspite of going through lots of Docs. I am not able to access the JSP which is deployed using JDeveloper 3.2 in the browser? What should be the URL and where should I place the JSP and the related files in the Apache Server (Specific directory)?
Please help, this is very Urgent.
Could I get some sites where I can get detailed description of how to deploy and access Servlets and JSPS using JDeveloper 3.2 for OAS 9i?
Thanks in advance,
Regards,
Kavita.
null

Hi Kativa,
In answer to your first question: In most apache installs, you want to place all your JSPs under the Apache/htdocs directory. This htdocs directory becomes the root directory of your HTTP request, so, for example, to access the file
Apache/htdocs/mydir/myJSP.jsp
you'd point your browser to
server:port/mydir/myJSP.jsp]http://server:port/mydir/myJSP.jsp
As to your second question: Do you mean Oracle 9iAS? If so, look at this HOWTO: http://technet.oracle.com:89/ubb/Forum2/HTML/006398.html
JDeveloper 3.2 does not support deployment to OAS (the predecessor to iAS), but there was no OAS 9i.
null

SQL Query, please help very urgent

I am a newbie is sql.
I have two tables called test_master and test_detail.
Both tables contains pos_id as common field.
In test_detail got sub_id and to get the people under a given pos_id, I join with pos_id of test_master.
In the where condition, when I give the pos_id, it's returning only
the first level. How can I get the second level and get all the levels?
Any help is highly appreciable.It's very urgent.
Looking forward to hear from you.
Thanks
Newbie

Ok, I am pasting the description of the master and detail in the order.
Master
EMPLOYEE_NO VARCHAR2(30)
ORGANIZATION_ID NUMBER(15)
ORGANIZATION_NAME VARCHAR2(240)
POSITION_ID NUMBER(15)
POSITION_NAME VARCHAR2(240)
Detail
POSITION_ID NUMBER(15)
SUBORDINATE_ID NUMBER(15)
ORGANIZATION_ID NUMBER(15)
POSITION_NAME VARCHAR2(50)
Here is the sql, I want to get all the subordinates under a given position_id of the master.
Looking forward to hear from you.
select a.employee_no,a.POSITION_ID,a.POSITION_NAME,a.EMPLOYEE_NAME,
b.position_id,b.subordinate_id from portal_employee_master_test a,
portal_structure_test b
where a.POSITION_ID = b.POSITION_ID and a.POSITION_ID='xyz'
and b.position_ID=a.POSITION_ID

How can maintain log file Please help Very Urgent.

I am developping an application in PDK. From my application I need maintain a log file in the server side. Please help me how can I do this. If you do have links regarding this matter please pass it.

You might want to use the SAP Logging API. see
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing</a>
In NWDS include a reference to logging.jar (use variable SAP_LOGGING_LIB_HOME).
You can then write to the log in this way:
public class Xyz {
     private static final Location TRACE = Location.getLocation(Xyz.class);
     // It is not nice to set the severity in static code - only for demonstration purposes.
     // For production-ready code this should be done via a log-configuration.xml
     // to allow configuration of the severity at runtime.
          TRACE.setEffectiveSeverity(Severity.ALL);
     public void myMethod() {
          final String METHOD = "myMethod()";
          TRACE.entering(METHOD);
          TRACE.debugT("whatever");
          TRACE.exiting(METHOD);

Response already commited error. Please help very urgent

Hello,
I am getting "RESPONSE HAS ALREADY BEEN COMMITED" error, when I open a report.
Please explain why do the get this error and how can I prevent it from coming.
Thanks in advance.
Raghu

Can't really give much more than general guidelines as you haven't provided that much information.
A stack trace indicating what caused the "response already commited" error would be useful in diagnosis...
HTTP is one request, one response.
You get a request, you can only send one response to it.
When dealing with a JSP your response html text gets written to a buffer, and then to the output stream.
You can change your response output any time until the output is committed.
The response gets committed if
- the buffer fills up with data. The default size of the buffer on a JSP page is 8kb If more than 8kb of data is written, then it will commit the response. You can change the size of the buffer with the [<%@ page %> directive|http://java.sun.com/products/jsp/syntax/2.0/syntaxref2010.html#15653]
- you flush the output buffer manually
What sort of things cause the buffer to be cleared and reset? Anything that changes your response completely.
The obvious causes:
- a jsp:forward
- a response.sendRedirect
- an exception that tries to load the error page.
How to prevent it?
1 - if you are going to forward or redirect from a jsp page do it as early as possible in the page to prevent the buffer filling up.
2 - just because you issued a <jsp:forward> doesn't necessarily mean the page has stopped executing. Put it in an if/else block or similar so that after it does the forward/redirect it doesn't keep executing that same page.

Error Pl help-Very urgent!

Am getting the following error.Please help very urgent
500 Translator.CompilationFailedExceptionCompiler errors:
Found 1 semantic error compiling "D:/JRun4/servers/default/default-ear/default-war/WEB-INF/jsp/jrun__quicklinks2ejspf.java":
502. for (Enumeration e = prioLinkBean.getGlobalTop() ; e.hasMoreElements() ;)
<---------->
*** Error: "prioLinkBean" is either a misplaced package name or a non-existent entity.
Translator.CompilationFailedExceptionCompiler errors:
Found 1 semantic error compiling "D:/JRun4/servers/default/default-ear/default-war/WEB-INF/jsp/jrun__quicklinks2ejspf.java":
502. for (Enumeration e = prioLinkBean.getGlobalTop() ; e.hasMoreElements() ;)
<---------->
*** Error: "prioLinkBean" is either a misplaced package name or a non-existent entity.

prioLinkBean.getGlobalTop();
are u sure this method returns an Enumeration ???
post ur code!
[email protected]

Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! please help

Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! i never backed up on itunes ..please help

No. The contacts are "owned" by the Exchange server.
The Exchange server is owned by the company.
Everything on the Exchange server is owned by the company.
If you quit or were terminated, and your access to the system has been revoked, then there is nothing you and do at this point. Once you deleted the account from your phone, all of the associated data was deleted.
NEVER store personal information on company systems.

Javafx deployment in html page(please help me urgent)

i used the following method to deploy javafx in an html page.
javafx file is:
package hello;
import javafx.scene.*;
import javafx.stage.Stage;
import javafx.scene.text.Text;
import javafx.scene.text.Font;
import javafx.scene.paint.Color;
import javafx.scene.effect.DropShadow;
Stage {
    title: "My Applet"
    width: 250
    height: 80
    scene: Scene {
        content: Text {
            x: 10 y: 30
            font: Font {
                 size: 24 }
            fill: Color.BLUE
            effect: DropShadow{ offsetX: 3 offsetY: 3}
            content: "VAARTA"
I save the file as HelloApplet in a 'hello' named folder in my D:
after that i downloaded from internet html code as
<html>
    <head>
        <title>Wiki</title>
    </head>
    <body>
        <h1>Wiki</h1>
        <script src="dtfx.js"></script>
        <script>
            javafx(
                archive: "HelloApplet.jar",
                draggable: true,
                width: 150,
                height: 100,
                code: "hello.HelloApplet",
                name: "Wiki"
        </script>
    </body>
</html>now i typed in DOS prompt as javafxc.exe HelloApplet.fx & i got the class files .
_The main problem which is coming is how to create HelloApplet.jar file which is used in the html page without which the html page is not displaying the javafx script. Please help me urgently i am in the middle of my project & stuck up due to JAVAFX                   i am using WIndowsXP & javafx-sdk1.0 when i am typing jar command inside hello package it is displaying invalid command.in DOS prompt. If there is any other method to deploy javafx in html page then specify it also.

Crossposted: [http://forums.sun.com/thread.jspa?threadID=5323288].
Please don't crosspost without notifying others. It is rude in terms of netiquette. Stick to one topic.

I made upgrade for IOS to 7.04 but my iphone is second hand and when iphone need to make activation ,i don't have the apple ID so my iphone didn't work from this time so please help me urgent

I made upgrade for IOS to 7.04 but my iphone is second hand and when iphone need to make activation ,i don't have the apple ID so my iphone didn't work from this time so please help me urgent.

There isn't one.
amrzaky wrote:
I can't contact with previous owner s i need another solutoin
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.

SQL SELECT Query Help ..Please its very Urgent!!

Hi All,
I am having Oracle Database whice is storing 1000's of records daily.
I need to select some information based on date and time.
I am having two coloumns for Date and time. The first column(testDate) of type Date stores date as MM/DD/YY format and the second column(testTime)of type Numeric stores the time in seconds.
The Example data is :
testDate ------=-- testTime
11/12/2002 --- 35000
11/12/2002 --- 43000
11/12/2002 --- 45000
11/12/2002 --- 75000
11/13/2002 --- 2000
11/13/2002 --- 3500
11/13/2002 --- 4300
11/13/2002 --- 9800
11/13/2002 --- 23000
11/14/2002 --- 5000
11/14/2002 --- 10000
11/14/2002 --- 15000
How can i write a SELECT Query to get the records of specific date and seconds to next day specific date and seconds.I mean i want all the records between 11/12/2002 --- 43000 seconds to 11/14/2002 --- 1000 seconds.
If any one helps me in this regard iam very thank full to them.Its very urgent for me.
Thanks

Hi m7nra,
I used the query as
SELECT * FROM table
WHERE testDate + (testTime/(24*60*60)) BETWEEN TO_DATE('MM/DD/YYYY','12.11.2002') AND TO_DATE('MM/DD/YYYY','14.11.2002')
its giving DATE FORMAT NOT RECOGNIZED error.
The Example data is :
testDate ------=-- testTime
11/12/2002 --- 35000
11/12/2002 --- 43000
11/12/2002 --- 45000
11/12/2002 --- 75000
11/13/2002 --- 2000
11/13/2002 --- 3500
11/13/2002 --- 4300
11/13/2002 --- 9800
11/13/2002 --- 23000
11/14/2002 --- 5000
11/14/2002 --- 10000
11/14/2002 --- 15000
infact i need all the records between 11/12/2002 --- 43000 seconds to 11/14/2002 --- 1000 seconds.
Please help me to find a full query beacuse iam very new to Oracle.
Thanks,
S R Mannava

Sql Query . Please help its urgent.

Suppose in table EMP there are 2 columns (Roll_no and Name)
Roll NO Name
00001 A
00002 B
00010 X
My requirement is to trunc preceding Zero's. For ex : for Roll no: 00001 the output should be 1 and for 00002 --> 2 .
Please help its very urgent.

try this
      select
              to_number(roll_no) roll_no,
              name
      from
              emp;
     Regards
Singh

MSI MS 7100 K8N Neo 4 Diamond need bios configuration help very urgent

Hello every body i need very urgent help,
i need help on above mainboard bios conf. i will attach two seperate hdd (120 GB sata II) and i will setup W2003 standart 32bit ed.
if possible i won't use any raid configurations, but i need speed
how should i conf. bios and which controller shouşd i use silicon or nvidia or how and wich has to be used.
corecction about my configuration
Mainboard   MSI MS 7100 K8N Neo 4 Diamond (NF4 SLI,GLAN,SATA)
CPU      AMD Athlon 64 X2 3800+ (2.0GHz,1024K Cache,S939) BOX
Ram      CORSAIR Value Select DDR400 1024MB Kit (2x512MB)
Hdd      SAMSUNG 120GB 7200RPM 8MB SATAII (2x120GB)
Graphic Card SAPPHIRE 256MB ATI Radeon X1600 PRO (PCI-E) AVIVO
Case      ENLIGHT 7247 400W

Hello !!
The Bios configuration depends on many factors.....but we do not know anything about your configuration. ( CPU, RAM, Powersupply.....)
If you need HDD Speed, RAID 0 will be a good Option and you should consider it.
Both Controllers, Silicon Image & nvidia, have the same speed. But i think you can not attach Optical drives to the Silicon Image Controller. ( if someone has other experiance please post )
Good Luck
Greetz MurdoK

When i search for a website it takes me to another website. I will click on the link and it takes me to one ive never wanted? please help very frustrating! I am not very computer savy, is it my settings or something? Jen

When I search for a website it itakes me to another website. I will click on a link and it takes me to something completely different or yellow pages etc. Please help I am very frustrated and not very computer savy! Thanks! Jen

Hi Jeff I have uninstalled Muse from my applications and have tried to download the new version but it displays a message 'file not found'. I have included a screenshot.

Problem in VO execution----Please help me urgent

Hi,
I have One region(ASNOpptyReviewRN).this region is a tab in the main page(OpptyPG).For the region i am using one VO(OppReviewVO).
When i came to this page i am writing the code in the process request to execute the VO based on the condition..so i can get the data on the page.
First time VO is getting executed and data is coming in the page.if there is no data then i have the requirement to insert or update the fields in the region.
So everything is working fine first time..or if i not insert anything new row...it is working fine all the time.
But the problem is...after insert a new row and if i come to home page(not OpptyPG) and if i go to the ASNOpptyReviewRN the vo is getting executed but it is not showing the data on the page..
This is happenig only when i insert a new row and i come back to that page..
Please Help me..its urgent.. i am pasting the Processrequest and Amimpl code here...
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am=pageContext.getApplicationModule(webBean);
String BidNumber=(String)pageContext.getTransactionTransientValue("ASNOpptyDetNbr");
String reviewdBy=pageContext.getParameter("ReviewedBy");
String reviewdDate=pageContext.getParameter("ReviewedDate");
String versionNum=pageContext.getParameter("VersionNumber");
String effortWithoutCont=pageContext.getParameter("EffortWithoutContingency");
String contEffort=pageContext.getParameter("ContingencyEffort");
String reviewFlag=pageContext.getParameter("ReviewFlag");
String expiryDate=pageContext.getParameter("ExpiryDate");
String comments=pageContext.getParameter("Comments");
Serializable[] parameters={BidNumber,reviewdBy,reviewdDate,versionNum,effortWithoutCont,contEffort,reviewFlag,expiryDate,comments};
pageContext.writeDiagnostics(this, "Inside ifff Bharat", 1);
am.invokeMethod("insertBidReviewRow",parameters);
and the method in the am is
public void insertBidReviewRow(String BidNumber,String reviewdBy,String reviewdDate,String versionNum,String effortWithoutCont,String contEffort,String reviewFlag,String expiryDate,String comments) throws SQLException,
ParseException
String msg1="Hi i am inside bidreview"+BidNumber+reviewdBy+reviewdDate+versionNum+effortWithoutCont+contEffort+reviewFlag+expiryDate+comments;
logMessages(msg1);
Number bidnum=new Number(BidNumber);
OpportunityBidReviewVOImpl vo;
vo = getOpportunityBidReviewVO1();
vo.setWhereClause(null);
vo.setWhereClauseParams(null);
vo.setWhereClause("BID_ID=:1");
vo.setWhereClauseParam(0,bidnum);
vo.executeQuery();
int rowCount=vo.getRowCount();
String msg8="Hi no of row count:-.."+":-- "+rowCount;
logMessages(msg8);
if(rowCount==0)
String msg2="Hi iam inside bidreview:- Before fetch...";
logMessages(msg2);
vo.setMaxFetchSize(0);
Row row=vo.createRow();
String msg3="Hi iam inside bidreview:- After create....";
logMessages(msg3);
vo.insertRow(row);
String msg4="Hi iam inside bidreview:- insert row....";
logMessages(msg4);
row.setNewRowState(Row.STATUS_INITIALIZED);
vo.setCurrentRow(row);
String msg5="Hi iam inside bidreview:- insert row....";
logMessages(msg5);
OpportunityBidReviewVORowImpl opptybidreviewVo = (OpportunityBidReviewVORowImpl)vo.getCurrentRow();
opptybidreviewVo.setBidId(bidnum);
opptybidreviewVo.setReviewedBy(reviewdBy);
//opptybidreviewVo.setReviewedDate(reviewdate);
opptybidreviewVo.setVersionNumber(versionNum);
opptybidreviewVo.setEffortWithoutContingency(effortWithoutCont);
opptybidreviewVo.setContingencyEffort(contEffort);
opptybidreviewVo.setReviewFlag(reviewFlag);
//opptybidreviewVo.setExpiryDate(expirydate);
opptybidreviewVo.setComments(comments);
String msg6="Hi iam inside bidreview:- after all....";
logMessages(msg6);
String msg7="vo is cleared";
logMessages(msg7);
else
String msg7="Hi iam inside bidreview:- already existing.....";
logMessages(msg7);
Thanks in advance
Edited by: 842238 on Jul 1, 2011 7:07 AM

Hi Kristoper,
No..that Vo is based on some EO..why i am using the row.setAttribute() is...the bid number is coming from some other page...and i need to insert it in table..
and except the bid number..other values are coming from the page...
Thank you

Using flat file to upload in ABAP. Please help. Urgent

Hi all,
I am using a CSV excel file to upload some data to my ABAP program. Thje file contains material numbers as one of the fields. But if I enter the material number 11910892E80, excel converts it to 1.19E+87. Since I am using this file in the program to extract some fields from MARA, i am getting an error 'Material number does not exist'.
I know that we can avoid this problem by changing the format type of the cell to 'text' in excel. I want to know if there is any other way to rectify this problem. I have to use an excel file for upload. Notepad will not do.
Please help me solve this problem. It is urgent.
Thanks and regards,
Swaminath

Hi
If it is comma delimited file (CSV format) you can directly read the whole file and into a table with one field.
Loop at that table.
Use split a comma into fields of your internal table.
endloop.
Sample code
move pcfile to v_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = v_file
      FILETYPE                = 'ASC'
      HAS_FIELD_SEPARATOR     = 'X'
    TABLES
      DATA_TAB                = in_rec
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
if sy-subrc ne 0.
    write:/5 'Error with PC file'.
endif.
loop at in_rec.
    if in_rec(4) ca number.
      split in_rec at p_del into
        itab-tcode itab-tcodet
        itab-saknr
        itab-waers1 itab-waers2
        itab-amt1   itab-amt2
        itab-gl itab-kostl
        itab-prctr itab-obukrs
        itab-otcode itab-otcodet.
      if itab-amt1 = '0.00' or itab-amt1 = space.      "skip this line
        continue.
      endif.
      move-corresponding itab to fitab.
      append fitab.
      clear: itab, fitab.
     append itab.
    endif.
endloop.

Please help(Very Urgent)

Similar Messages

Maybe you are looking for