Please help with RED HAT INSTALL
I am trying to install jdk (or whatever have they changed it's name to) 1.3.1 on Red Had Linux, but i run into this problem:
The file I get is called:
j2sdk-1_3_1-linux-i386-rpm.bin
and it is supposed to be a rpm file that when ran with rpm installs the application.
But if i try to run rpm -ivh j2sdk-1_3_1-linux-i386-rpm.bin it says that this file doesn't look to be an RPM file. I am trying to install as root so there is no security issue.
Any help is welcome,
Calin
j2sdk-1_3_1-linux-i386-rpm.bin
I had the same problem with Debian. What I wound up
doing was renaming the file. Try
mv j2sdk-1_3_1-linux-i386-rpm.bin j2sdk-1_3_1-linux--386-rpm
It should work after that.
Mark
Similar Messages
-
Please help with erase and install
I have been having major problems lately with my Leopard upgrade which I did once Leopard first came out.... Ran good for a while but now it locks up all the time and force quit does nothing... At first I did an Upgrade from Tiger but now I want to do an erase and install...
Can someone run me through using Time Machine to backup my existing drive for my Applications I have like CS3 and Quark etc...
My main question is... after running TM and having a copy of my existing hard drive.. once I erase and install Leopard can I just tell TM to put certain files back on but leave the NEW Leopard install clean?
Thank you in advance,
MarcIf you are going to go to the extreme of doing an Erase and Install, then do it right and also re-install all your third-party software. This will assure that you won't have problems caused by damaged components or files belonging to your third-party applications. Just backup your personal data files, pictures, music, etc. which you can do by copying them to your backup drive.
If this isn't feasible then rather than an Erase and Install do an Archive and Install:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc. -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
I am using Mandriva Linux now.
But I am using Firefox 3.6.8, but I cannot install java plugin in it.
Can anyone please help me how to install it?The plugins folder in the Firefox installation folder doesn't exist by default. There is no default plugin in Firefox 4, so that folder would be empty and in thus not included. If you want to use that location then you need to create a plugins folder.
Did you try /usr/lib/mozilla/plugins ? -
Please help with minidump - Windows 7 64 bit
Hi,
I recently reinstalled Windows 7 and since reinstalling, I've been having a problem with BSODs when running Freemake Video Converter which was working flawlessly before the reinstallation. No hardware changes have been made, nor any BIOS changes.
I was getting various different BSOD messages and they seemed to point to Kaspersky 2013 so I uninstalled that, ran Kaspersky's uninstallation tool but still kept getting BSODs when running Freemake.
So I formatted and reinstalled Windows 7 64bit again and installed MSE instead of Kaspersky.
I am still getting BSODs using Freemake though and it looks like a driver problem but that's as far as I can guess!
My system consists of an Intel 2600k, 16GB RAM, Ati HD5450 VGA, 250GB Samsung 840 Pro SSD, Asrock Z68Extreme7 motherboard, various SATA storage drives, Pioneer DB-206K Blu-ray writer.
Could someone please help? I have installed Windows Debug and here is my latest minidump:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\030414-9313-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: srv*c:\windows\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`02a4c000 PsLoadedModuleList = 0xfffff800`02c91e90
Debug session time: Tue Mar 4 02:26:40.038 2014 (UTC + 0:00)
System Uptime: 0 days 0:09:52.787
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80002ae88a4, fffff880072ffd00, 0}
Probably caused by : Unknown_Image ( nt!KeReleaseSemaphore+1e4 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002ae88a4, Address of the instruction which caused the bugcheck
Arg3: fffff880072ffd00, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!KeReleaseSemaphore+1e4
fffff800`02ae88a4 0fb6462b movzx eax,byte ptr [rsi+2Bh]
CONTEXT: fffff880072ffd00 -- (.cxr 0xfffff880072ffd00)
rax=0000000000000037 rbx=fffffa8010760580 rcx=fffffa8010760620
rdx=0000000000000000 rsi=0a1001c9ea0fd64d rdi=0000000000000000
rip=fffff80002ae88a4 rsp=fffff880073006e0 rbp=fffffa8010760688
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=fffff8a00a3e3130 r12=0000000000000001 r13=fffff880009ec180
r14=fffff880009b3101 r15=fffffa8010760948
iopl=0 nv up ei pl nz na po cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010207
nt!KeReleaseSemaphore+0x1e4:
fffff800`02ae88a4 0fb6462b movzx eax,byte ptr [rsi+2Bh] ds:002b:0a1001c9`ea0fd678=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: FreemakeVC.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from fffff80002dd7d60 to fffff80002ae88a4
STACK_TEXT:
fffff880`073006e0 fffff800`02dd7d60 : fffffa80`00000000 fffff8a0`00000001 00000000`00000000 fffff8a0`0a3e3000 : nt!KeReleaseSemaphore+0x1e4
fffff880`07300760 fffff800`02dd954e : 00000000`00000000 00000000`00000000 03030303`00000000 00000000`00000000 : nt!AlpcpCompleteDispatchMessage+0xa10
fffff880`073007f0 fffff800`02dd6e4f : 00000000`00010002 fffff8a0`024ae648 00000000`00000000 00000000`00000000 : nt!AlpcpDispatchNewMessage+0x24e
fffff880`07300850 fffff800`02da1d53 : 00000000`00000030 00000000`00000000 00000000`00000000 fffffa80`0f137900 : nt!AlpcpSendMessage+0x4ad
fffff880`07300950 fffff800`02da2465 : fffff880`00000000 00000000`051fe600 fffffa80`0f137900 00000000`00000000 : nt!PspExitThread+0x223
fffff880`07300a50 fffff800`02da2575 : fffffa80`0f137990 00000000`00000000 fffffa80`0f137990 00000000`7ef01000 : nt!PspTerminateThreadByPointer+0x4d
fffff880`07300aa0 fffff800`02acb8d3 : 00000000`00000000 fffff880`07300b60 00000000`7ef01000 00000000`00000000 : nt!NtTerminateThread+0x45
fffff880`07300ae0 00000000`76e2184a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`051fe668 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76e2184a
FOLLOWUP_IP:
nt!KeReleaseSemaphore+1e4
fffff800`02ae88a4 0fb6462b movzx eax,byte ptr [rsi+2Bh]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!KeReleaseSemaphore+1e4
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: Unknown_Image
DEBUG_FLR_IMAGE_TIMESTAMP: 0
STACK_COMMAND: .cxr 0xfffff880072ffd00 ; kb
BUCKET_ID: INVALID_KERNEL_CONTEXT
MODULE_NAME: Unknown_Module
Followup: MachineOwnerLemental2
Both of these were inconclusive and were different error codes (BCC). Though Freemake was the active process I think there is an underlying issue. Please run driver verifier as instructed in this wiki. It will give a much better chance
of "catching" the mis-behaving driver.
Please run this test to find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Driver verifier (for complete directions see our wiki here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag -
hello, hopefully i have post the correct forum.
all my computer file even ie/firefox or chrome, when i try to open all file open with adobe, but can't not even open, so i need to uninstall the adobe reader 10 and everything goes to normal.
but i need the adobe reader on my computer, please anyone can help me to go back normal and re install the adobe
i know i did something wrong and all my exe.file can't read and somehow now it working but not the adobe
sorry, i don't kno how to explain
please help me to re install adobe reader
thank you so muchAre you using Windows 7 or Vista?
If so, recreating the user profile may help to resolve the issue. -
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.
If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.
-
How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141 -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs
Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein -
GPIB-ENET/100 Issues with Red Hat Enterprise Linix 3.0
Does anyone know of issues with Red Hat Enterprise Linux 3.0?
Using Red Hat Linux 8.0, I am able to run EthernetConfig and identify all the GPIB-ENET/100 devices on my Ethernet.
Running EthernetConfig under Enterprise Linux does not work properly. No devices are detected.
Everything else appears to be working.
I can ping the device.
I can also detect the device using my Windows based program NI-488.2M for Windows NT/GPIB-ENET100 Utilities/Device Configuration.I do not know of any issues with RHEL 3.0 and the Beta 488.2 driver. I believe that you have started a support request via e-mail so I will deal with your issue there.
Thanks,
Scott B.
Applications Engineer
National Instruments -
Please help us, after we installing the flash player is said that the plug-in version is not installed and i need Flash Player for my windows 7 Professional 64-bit Japanese version and Internet explorer 10
Hello,
There are two versions of Flash Player for Windows: ActiveX for Internet Explorer and Plug-in for non-IE browsers. It appear you may have installed the one for non-IE browsers. Please use the links below to download and install:
Flash Player ActiveX (Internet Explorer
Flash Player Plug-in (All other browsers)
Maria -
Hi,
Please help
How can I install flash player plugin (version 8) in browser
without
downloading setup or redirecting to macromedia site if flash
plugin is not
available in browser
ThanksVia Javascripting. Look for Flash detection kits at the
Adobe/Maromedia web
site and also at Internet search engines.
As well this forum focuses on database access issues and you
might find more
takers for this type of question in the Flash General forum.
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"jiby" <[email protected]> wrote in message
news:e3odp2$pdc$[email protected]..
Hi,
Please help
How can I install flash player plugin (version 8) in browser
without
downloading setup or redirecting to macromedia site if flash
plugin is not
available in browser
Thanks
Maybe you are looking for
-
Failed to open service OracleDEV102TNSListener , error 1060
Dear Consultants, I have been trying to install ECC6 , Oracle on Windows 2003, and my Hardware is RAM --2 GB HDD -- 300GB I am having intel duo core processor and iam using Gigabyte motherboard,Intel chipset. My Installations stops at Import_Abap pha
-
Can't update to 10.6.8 kernel panic and pcscd.pub wrong block count
Hi there, as the title said, I cannot update to the recent 10.6.8 v1.1 (nor v1 for what it matters). All seems going fine till the iMac reboots, then a kernel panic is generated. Only way out is to reinstall 10.6.7 COMBO. Both Disk Utility and Disk W
-
Printing in Lightroom Produces Wrong Colors
I have searched these forums and found a couple of topics that have to do with incorrect or wrong colors being printed by Lightroom but none of the suggestions proposed seemed to help. So, I think that I have something else going on that is causing m
-
Obtaining TNS entries from PL/SQL
I read somewhere that one can get TNS entry definitions via PL/SQL. We currently develope/maintain a project on Oracle 9.2.0 which interconnects to at least 3 other projects running oracle instances. The problem here is that we have multiple developm
-
I use muse 2014 on an acer s7 using windows 8 and I cannot change the font without muse crashing and even after it seems to recover I try again and it crashes Bug that needs fixing?