Clicking on the font dropdown crashes the app for about 20 seconds or more and I am unable to change the font.
I use muse 2014 on an acer s7 using windows 8 and I cannot change the font without muse crashing and even after it seems to recover I try again and it crashes
Bug that needs fixing?
Hello chelle77549,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If your issue is still unresolved, perform a software restore in iTunes.
Best of luck,
Mario
Similar Messages
-
I want to use my Apple watch to time my patients' vital signs. The watch face only stays displayed for about 7 seconds, which won't work. Can I change that?
Linda
I am glad that bbqdevil's *workaround* will "do the trick"
Did you give the Timer idea a try yet? It seems to me that you are really needing to know when a certain amount of time has elapsed rather than *time how long you have being taking a reading*. Will you always have your hand free to tap the Watch? If so, why would you need the StopWatch going? - just look again at the sweep second hand on the clock.
It still remains that one should be able to set the time elapsed before sleep on a Chronograph w/ sweep second WatchFace though. I have searched and searched, to no avail.
I would suggest Siri, but it seems like many issues with Siri are ongoing and might just add another problem to the mix.
If I were you, I would Call Apple Support. It is sometimes tricky to get that option in the "breadcrumb" process Apple has instituted, but I was able to test the process before suggesting this:
Click/Tap > https://getsupport.apple.com/GetproductgroupList.action
Choose Apple Watch
Choose "Setup & Usage..."
Choose "The topic is not listed"
Enter "set sleep duration" > [Continue]
(I know this in not exactly right, but the point is to be vague)
Pick your poison - I would ONLY choose to talk with them on the phone
Rehearse an "elevator pitch" statement* for the Specialist that you get AND when you get no satisfaction (likely) ASK FOR A SUPERVISOR
I have NEVER gotten an answer from a Level 1 Specialist - they are reading from a Knowledge Base not unlike all the resources available to us online
I have ALWAYS gotten satisfaction from a Senior Specialist (sometimes pretty high up the chain - but always)
Here's a sample "elevator pitch" that I actually sent as Feedback on the Apple Watch User Guide page
I need to change the duration 'before' the Watch goes to sleep while observing the Chronograph Watch Face.
I am a healthcare provider. I need to use my Watch to assist me in taking vital signs. On a normal watch, I would start counting pulses or respirations at a 15 second interval on the Analog Chronograph sweep second hand > stop counting at the next 15 sec. interval > multiply X 4 to get rate/minute.
The Watch goes to sleep after SEVEN (7) seconds !! Therefore I cannot see when 15 seconds has elapsed. I use both hands regularly in the procedure, so touching the Watch is not an option - or 'raise the Watch' to my viewing position.
I, and others in the ASC forum have searched for a Setting for the before sleep duration in vain.
Let us know what you decide.
ÇÇÇ -
Each year I am in charge of making a slideshow of photos and music for my annual company meeting. I always use iDVD to set up my photos and music and then burn the DVD to play at the meeting. Every time I burn the DVD, it blurs right before the transition of the photo. It has always done this and I'm not sure why. It will also make the music glitch in a few spots for about 5 seconds or more. If I burn another DVD to try it again, the glitches will still be there, but in different spots. I've tried the highest quality of DVD's possible and this still happens. What can I do to fix this problem?
Try disabling transitions altogether!
There is a technical reason that this breakup happens - it is to do with how slideshows can be saved within the DVD specification, they can either be recorded as 'video streams' or as a collection of 'still images'.
When you add transitions iDVD has no option but to use a video stream, this can result in terrible 'breakup' because the mpeg 2 encoder isn't designed to handle scenes that are static with a sudden short change. You can see 'artefacts' in the video stream…
https://en.wikipedia.org/wiki/Compression_artifact
'Still image slideshows' avoid the issue altogether by only showing a static image, no video compression is used & because the scene doesn't transition so it shouldn't breakup.
NOTE: Music on the slideshow is irrelevant, both types can use a soundtrack.
I cannot remember if it is possible to force iDVD to only make still image slideshows, I always use DVD Studio Pro to correctly setup DVD's. I'd suggest you use the option to save the DVD to a disk image & then open that disk image so that DVD Player can preview it, that should save on the number of test disks you burn.
If you cannot make it avoid using video streams you may be ether off making your own video slideshow in iMovie & then import that into iDVD. It may eventually look better despite being a video stream!
iDVD isn't really condusive to professional levels of control. -
G50-70: empty DVD-drive clicking and freezing other drives for about 30 seconds all the time
Hello board. Big problem. Seem to be the only one having this after searching the board:
Brand new G50-70: When using OS from the SSD or using OS from the SSD and doing things with a USB-drive, the empty internal DVD-drive making clicking sound and sometimes freezing SSD read/write operation for about 30 seconds but all the time freezing USB-storage read/write operation for about 30 seconds.
When freezing there's always clicking. But when clicking there's not always freezing except when using USB-storage.
OS is Win81-64.
An example scenario: connect USB stick, open terminal, type diskpart, dvd-drive clicks and freezes opening of diskpart for about 30 seconds, then the same may or may not happen when entering commands like clear the stick and format the stick.
Any clues, why I have this issue? Thank you very much for reading.
Solved!
Go to Solution.hi georg43,
it's possible that there's a software running on startup that's accessing the ODD when the machine is being used (especially if the ODD LED blinks when it's being accessed)..
To check, you can perform a clean boot to temporarily disable apps & services running on startup. If the machine functions properly on a clean boot, you will need to enable the startup services/programs that you have disabled in groups of two or three (trial and error) to find the culprit. You can start by enabling the lenovo services and apps first followed by the Intel ones and observe.
In addition, you can also try to disable the DVD-drive under device manager and observe.
- Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)
Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e -
I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
How it it I have 550 songs on my nano but only 269 show up in itunes without playlists? How do I get all 550 songs and playlists back into itunes?
Also when i click on "computer" the nano icon is up for about 5s then goes away and I can't find it...what is going on?spea105 wrote:
How it it I have 550 songs on my nano but only 269 show up in itunes without playlists? How do I get all 550 songs and playlists back into itunes?
How do you manage your iPod? Do you Sync your entire music library, or only selected playlists? -
Hi, when I try to download an application the app stores downloads it for about 2 seconds and then it stops downloading it! I don't know what's wrong?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... (But can take Longer..)
Release the Buttons...
If no joy...Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings. -
I am trying to lauch an application on my ipod touch. When I try, it opens for about 2 seconds and then immediately closes. I deleted the application, reset and restarted my ipod and then download the application again. Still no success. The application is legit: Crunchtime for Contracts.
Any suggestions?I suppose the app has problems with your soft and hardware. Or maybe its a known bug of that app.
Try Uninstalling->Rebooting->Installing->Rebooting. -
I already used facetime before but for some reason I have to sign back in and it wont let me. I clicked "Get Started" then "Sign in" but then after about 3 seconds on the next page it just slides back to the "sign in page"
Try a Reset of your Device...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also see here...
Troubleshooting FaceTime
http://support.apple.com/kb/TS3367 -
My keyboard will work for about 5-12 typed letters and then will beep each time I try to type a letter, and no type appears, and I have to click on the field again to start typing!! Just getting this question typed was a huge chore!! We even bought a new keyboard and it did not fix the issue.
It depends on what keyboard you have, if not than their May be a problem with your device
-
So can anyone tell me how to fix this problem? I cant surf the web because as soon as I click on the Safari icon it will pop up for a split second then dissapear and take me to the Ipad homescreen. This happened when I downloaded the IOS 7.0.4. I have the IPAD 2.
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
I've used Firefox for years with no problems. I've not installed any new extensions or programs between the time it worked great and when the problem began.
I click to start FF (shortcut, directly on program file, etc.) and I get an hourglass for a couple of seconds like it's starting, then nada. As mentioned, I see FF show up as a process in Task Manager for about 3 seconds, then disappear.
Solutions I've tried include: Uninstall/reinstall on the same drive and a separate drive, registry cleanup/optimization w/Norton Utilities, full scan for malware/viruses with Norton, stopping some autostartup programs that were installed and in use while FF was running fine.I've used Firefox for years with no problems. I've not installed any new extensions or programs between the time it worked great and when the problem began.
I click to start FF (shortcut, directly on program file, etc.) and I get an hourglass for a couple of seconds like it's starting, then nada. As mentioned, I see FF show up as a process in Task Manager for about 3 seconds, then disappear.
Solutions I've tried include: Uninstall/reinstall on the same drive and a separate drive, registry cleanup/optimization w/Norton Utilities, full scan for malware/viruses with Norton, stopping some autostartup programs that were installed and in use while FF was running fine. -
When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
== This happened ==
Every time Firefox openedtry
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
I downloaded an album but one of the songs is corrupted, it only plays for about 4 seconds. When I try to re-download using the iTunes Store and "Purchased", it won't give me the option to download it again. How can I get the song I PAID for!!??
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Maybe you are looking for
-
Can you validate an XMLElement that uses the default namespace?
We have a partner that we communicate with via XML over HTTP and the schema that they gave us for their request/response does not specify a namespace. I am able to import the schema and create variables from its elements to send the request and get a
-
How to read a C structure with string and int with a java server using sock
I ve made a C agent returning some information and I want to get them with my java server. I ve settled communication with connected socket but I m only able to read strings. I want to know how can I read strings and int with the same stream because
-
User name with character . (dot)
Hi Experts, In tcode SU01 we can create a user name that contains character . (dot), but is it recommended by SAP? Thanks, kathy
-
Trouble with links that contain %2C (comma) in url
I have a friend that uploaded some files to a site for her students to click on and download. They're mp3 files of classical music, many of which contain commas in their filenames. When uploading them, the site escapes these commas by replacing them
-
I am trying to add a printer to complete a install, and the printer setup utility is gone-- vanished!! How can I get this restored? Any input is appreciated!!