Please help! XML output needed for OBIEE report.

Hi,
I need an xml output of the OBIEE report. I have tried extrating the xml result using GO url but the xml format is not satisfactory. The default output assigns C0,C1..column names to each column data while on the other hand I need the name of the column and not C0 or C1.
Hence, can anyone please suggest as to how can I format the OBIEE xml output internally i.e. without doing it manually.
Please let me know if more explanation is required.
Thanks in advance!!

Hi,
Thanks for the response but unfortunately Bi Publisher is even not giving the required output.
The output of Bi Publisher is like
<_170627_>170627</_170627_>
<_TRADES_._TRADE_ID_>2996</_TRADES_._TRADE_ID_>
<_FALSE_>FALSE</_FALSE_>
<_N_>N</_N_>
<_170627_>170627</_170627_>
<_R_>R</_R_>
and the output of OBIEE is
<C0>170627</C0>
<C1>2996</C1>
<C2>FALSE</C2>
<C3>N</C3>
<C4>170627</C4>
<C5>R</C5>
<C8>B</C8>
In both the cases I get leading and trailing tags which are not required. Ideally according to the requirement C0 should have been Trade ID, C2 - Cancellation option and so on.
The BI Publisher does give the output to some ectent but lans up capturing the table name also as u see it is Trades.Trades Id. I even reuire few extra tags which caary report information and this data is not being pulled from database.
Hence please help!! I am really very much confused!!
Thanks!!!

Similar Messages

Please Help Xml output with extra lines after removeNodeChild

Hi guys. I'm having trouble googling this out.
Here is the problem. Given an xml document. I read it on my app and manipulate it, then save it when I am done.
When I remove a child, the output files shows all the extra lines from the formatting and indent. So it looks like a big hole in the xml file after the node is removed. Here is an example
<bookshelf>
<books>
<book>
<isbn>3349583080580584308</isbn>
<author>Jon Stewart</author>
</book>
<book>
<isbn>9900909770543356488</isbn>
<author>Stephen Colbert</author>
</book>
</books>
</bookshelf>
Node parentNode = jonStewartNode.getParentNode();
parentNode.removeChild (jonStewartNode);The result of this is the following xml.
<bookshelf>
<books>
<book>
<isbn>9900909770543356488< /isbn>
<author>Stephen Colbert</author>
</book>
</books>
</bookshelf>
How can I output the xml without this extra lines?
Thanks in advance,
f(t)
PS: here is the initialization, and configuration of the TransformerFactory, and Transformer, and finally the save method.
     * Initializes factory instances and member variables.
    private void initialize(){
        try{
            //obtain a trasformer factory to save the file
            this.transformerFactory = TransformerFactory.newInstance();
            this.transformerFactory.setAttribute("indent-number", 4);
            //obtain the transforme
            this.transformer = this.transformerFactory.newTransformer();
            //setup transformer
            this.transformer.setOutputProperty(OutputKeys.METHOD, "xml");
            this.transformer.setOutputProperty(OutputKeys.INDENT, "yes");
            //this.transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount ", "4");
        }catch(TransformerConfigurationException tcex){
            this.logger.logException(this, "errors.storage.xml.configuringXmlTransformer", true, tcex);
     * Saves the DOM document to the XML file.
    private void saveDocument(){
        //verify that the documents is not null
        if(this.document==null)
            return;
        //sincronize document
        synchronized (this.document){
            try{
                //normalize document
                this.document.normalizeDocument();
                //get a document documentSource object out of the document
                DOMSource documentSource                = new DOMSource(this.document);
                //create the file output stream
                FileOutputStream fileOutputStream       = new FileOutputStream( this.file);
                //create the output stream writer
                OutputStreamWriter outputStreamWriter   = new OutputStreamWriter(fileOutputStream);
                //create the stream streamResult out to the file Stream
                StreamResult streamResult               = new StreamResult(outputStreamWriter);
                //performe the trasformation
                transformer.transform(documentSource, streamResult);
                //clean up
                outputStreamWriter.close();
                outputStreamWriter = null;
                fileOutputStream.close();
                fileOutputStream = null;
                documentSource = null;
            } catch (TransformerConfigurationException tcex) {
                // Error generated by the parser
                // Log Error
                this.logger.logException(this, "errors.storage.xml.saveXMLRepositoryFile", true, tcex);
            } catch (TransformerException tex) {
                // Error generated by the parser
                // Log Error
                this.logger.logException(this, "errors.storage.xml.saveXMLRepositoryFile", true, tex);
            } catch (Exception ex) {
                // Unknown error
                // Log Error
                this.logger.logException(this, "errors.storage.xml.saveXMLRepositoryFile", true, ex);
    }

I have an rtf template which is used to print output in pdf format. I have a table which has many rows which displays data for each record. In order to avoid breaking the page in between the rows of a record , i have added an outer table with single row and column and pasted the data table inside it and changed the row property of outer table to 'Allow Rows to Break Across Pages' to unchecked. It works fine only if the first record set length does not exceed a full page. IF the first record expanded to more than one page, it leaves a blank page at the very first and start the record at the second page. Can you please advise how to solve this issue. Its very URGENT please..

HT201269 I forgot my password for Encrypt my Backup how can I reset that please help I really need it Urgently???

I forgot my password for Encrypt my Backup how can I reset that please help I really need it Urgently?

If you do not know the passcode then you cannot use the backup
Sorry

I just exchanged a faulty iPhone 4 for a new one, when I got home to restore it, iCloud says "cannot restore backup". Can somebody please help provide much needed advice? Thanks in advance!

I just exchanged a faulty iPhone 4 for a new one, when I got home to restore it, iCloud says "cannot restore backup". Can somebody please help provide much needed advice? Thanks in advance!

Yep, that's the only message that popped out. Nothing else. Yes, it's running on the latest ios and I still can't restore it. I called apple and they told me it's probably something wrong with their servers. Anyway thanks for the advice.

My battery on my iphone theree is growning and it turns off around 80% then in order for it to turn back on i need to put it on the charger , somebody please help me i need to fix this is there anyway ican??

my battery on my iphone three is growning and it turns off around 80% then in order for it to turn back on i need to put it on the charger , somebody please help me i need to fix this is there anyway ican?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, then take the device to Apple for evaluation.
FYI, Apple will not replace the battery without first doing basic troubleshooting or testing the battery.

Please Help! I need to delet "Fellow member" on Sk...

Please Help!
I need to delete a "Fellow member" on the Skype manager. I don't know what is "Skype manager" and why the user Greiman Gomez Garcia (scanman113) is registered there, I DON'T KNOW HIM.
I already have seen the screens on the FQA, but I never can get to those.
I'm logging on web.
Thank you very much for your answer.

Hi, moremay, and welcome to the Community,
Your report reads as if your account may have been compromised. Can you still sign in to your account dashboard? If yes, check that the account's registered e-mail address is accurate and valid. Then, change your account's password - I prefer to do this from within the Skype software itself. After this, you can contact Skype Customer Service to close the "Skype Manager" set-up.
If you can not access your account, create a new account to use in order to contact Skype Customer Service and to recover your first account, as well as to disengage the "Skype Manager" which account hackers tend to use when they hack accounts.
Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
Skype is aware of lingering problems with the website when contacting their customer service agents. If you experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community, please try again using a different web browser and choosing a different path through the various drop-down menu options presented. Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also block reaching an agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

HT4199 I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need a

I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.

What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
See:
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points

Currency type option needed for copa report

Dear Experts,
Currency type option needed for copa report.I have checked all the possibilities in ke35 as well.
how to add curreny type in selection screen for COPA reports.
regards
RK

If you want to create your own report with required currency,
T CODE - KE35 - Click on "Report" (create), next window appears
Give the name of the report and description
The u see 2 options
1. Basic report
2. Report with Form
Select which ever you want and press ENTER
Here you need to prepare the report format and fields which are there in the right side box
Hope it helps
Thanks

Default output device for ALV report

Dear friends,
Here there is a user requirement that he want print a particular ALV report in a
perticular output device. and want to fix that output device for that report instead of changing everytime.
Kindly suggest.
Regards,
Praveen Lobo

Hi,
This way system is expected to search for default printer. What I would recommend you to do is call transaction SP01 within the report and pass the initial screen parameter thru FM.
Hope this lead, help you solve your issue!
Reetesh

Please help me, i need all driver HP ENVY m6-010dx support win 7 64 bit

please help me, i need all driver HP ENVY m6-010dx support win 7 64 bit.

Double post
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Where to download the crdb_jdbc.dll file ??? - Needed for Crystal report ..

Hi Friends ,
Where to download the crdb_jdbc.dll file ??? - Needed for Crystal report ..which is missing for me ...
i searched in many sites .. but this only dll file is missing ..
can any one help me out ..

itsdhanasaraa wrote:
Hi Friends ,
Where to download the crdb_jdbc.dll file ??? - Needed for Crystal report ..which is missing for me ...
i searched in many sites .. but this only dll file is missing ..
can any one help me out ..Ask at where ever you bought the software from.
Let me guess, you didn't buy it, did you?

Can somebody please tell me how to fix this. when i try to install appleworks this pops up so please help me i need to get this on my mac

can somebody please tell me how to fix this. when i try to install appleworks this pops up
so please help me i need to get this on my mac

AppleWorks is a very old application and requires Rosetta to run under recent systems.
Lion does not include Rosetta.
If you browse this forum you will find many posts on this issue.

My itunes will not! is giving me error7(windows error 126) and is stilling me MSVCR80.dll is missing and i tried downloading itunes like 6 times and is saying the same thing. Please help! i need to sync my kids ipads and ipods thank you!

my itunes will not open! is giving me error7(windows error 126) and is stilling me MSVCR80.dll is missing and i tried downloading itunes like 6 times and is saying the same thing. Please help! i need to sync my kids ipads and ipods
thank you!

Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086

PLEASE HELP ME, I NEED ALL DRIVER HP ENVY M6-K010DX SUPPORT WIN 7 64 BIT

please help me, i need all driver HP ENVY m6-k010dx support win 7 64 bit

Hi:
Try the W7 x64 drivers and software from this model which has the same processor.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6545...

Please help to find docs for Generation-4 Hardware

Hello
Please help to find docs for Generation-4 Hardware
• Cisco MDS 9000 48-Port 8-Gbps Advanced Fibre Channel module (DS-X9248-256K9)
• Cisco MDS 9000 32-Port 8-Gbps Advanced Fibre Channel module (DS-X9232-256K9)
• Cisco MDS 9513 Fabric 3 module, DS-13SLT-FAB3 (Generation-4 module)
Thanks
Chetan.R

Hello Chetan,
Here's a link to the Gen 4 migration guide:
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/hw/9500series/installation/5.2/installmigratefab3.html#wp1435702
I do hope that guide answers the questions you have.
Regards,
Ken

Please help! XML output needed for OBIEE report.

Similar Messages

Maybe you are looking for