Please please help My iPad fell down and i broke the glass..... what should i do?? can i repair it?? in India??
oh god..... i dont know what to do anymore!!!!!! it was an accident i swear.!.. but can i fix it??? in India????
Apple does not repair iPads, but will replace the entire iPad for a flat fee. You will need to contact an authorized Apple service center in India. See this web page:
https://locate.apple.com/in/en/
There are independent iPad repair services that may be able to replace the screen for less. Do a web search for "ipad repair". Note, though, that if you elect to have the iPad serviced by an unauthorized shop, all further warranty will be void.
Regards.
Similar Messages
-
HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes
please help my ipad min is not working on the scren it says iPad disabled connect to itunes
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My ipad mini broke the screem, what should i do??
I have scream protection and today in morning my ipad fall down and broke all the scream, what should I do, should I go to apple??
Apple does not repair iPads, but will replace the entire iPad for a flat fee. If you have AppleCare+ on the iPad, the cost will be relatively minimal; $49 in the US. Otherwise, see the Service Pricing section here:
http://www.apple.com/support/ipad/service/faq/
There are independent iPad repair services that may be able to replace the screen for less. Do a web search for "ipad repair". You can also look for parts and instructions and do the repair yourself. Note, though, that if you elect to have the iPad serviced by an unauthorized shop or perform your own repair, you will get no further support from Apple.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
Hi.
My iPad froze with a message "icloud backup" I clicked ok but it will not budge or unfreeze for me to do anything. I tried to power it off with no luck. Please someone help.You posted in the wrong forum, Snow Leopard. You need to post in the iPad forums. It's where the iPad users hang out at.
-
Please help! Lightroom shuts down and re-starts EVERY time I export a file
I've used Lightroom for 2 years and it only started happening TODAY! I need to edit my pictures in photoshop, but I can't get them from Lightroom because every time I hit the export button it starts the process and then my computer shuts down and then re-starts after a few seconds. Why? How can I fix it. I'm a wedding photographer and need these pictures edited! Any help is appreciated.
Check in the same folder/directory as your active .lrcat: there should be no xxxx.lock file when LR is quit; there should be one opened when LR is launched. Other than also deleting your Prefs file, perhaps the OS and version of LR would help.
-
IPad fell down and now screen is all black!
Hello!
I'm using the iPad 2nd Generation and my daughter dropped it on the floor this morning. The screen turned black. I tried the hard reset (home + power off for 10 seconds) and it's still not working. I plugged it into the usb port of my computer and iTunes is recognising the iPad but it's asking me for the passcode before letting access. Thing is, I cannot see anything on the ipad.
Has anyone else had this issue? Thank you in advance for your input.The reboot, or reset as you tried, will sometimes bring the screen back but not always. If holding both the power and home buttons does not result in the apple logo appearing in about a minute, the device needs to be taken to the Apple store genius bar to have the technicians test and see if there is a failure in the screen/digitizer.
-
Using Boot Camp, I installed windows 7 on my new imac and when I rebooted, mac disappeared. I tried to start the mac numerous times but it started with windows and all mac icons were gone. Can anyone help please.
rayafromgeneva wrote:
where do I find the Option key on my imac keyboard? When I start up, the screen shows only windows 7 nothing else. All mac icons disappeared.
Please help!!
It's between the Control and Command keys on the lower left. It's also called alt but is best know as the Option key. You are using an Apple keyboard aren't you? -
I bought a iphone 5c in usa but live in Brazil. It is still under warranty and the glass broke. Here in Brazil nowhere exchange just the glass, because this model is different from what came to Brazil. I am very sad, and I wonder if Apple changes the glass at no charge, or if you have any additional cost?
my friend is going to USA, if I say she can change at any store? so now they are exchanging just the glass for $ 79 U.S. dollars? I would not be possible to speak with some seller to know the right value? would love to know the value before it pays not know whether to send it
-
Please Help: Brand new to Logic and Mac at the same time
Dear Board,
I joined the Mac family yesterday and have done pretty well with getting Logic and Cubase 4 installed on the Mac. (It's like trying to learn Spanish when you're from Alabama)
However, when I assign an instrument track to ESX sampler, no libraries or presets come up. I can hear one sound, but when I pull down the menu to load another sound, there are no other sounds to be found. Do I have them stored in the wrong place or did they not automatically load when I installed Logic?
Specifically, I am looking for a decent acoustic piano sound, but can't make it work.
I migrated from Logic 5 on PC to this setup yesterday, so it's all new to me. Any help you can give will be appreciated.
Thanks,
B3
Mac Pro Mac OS X (10.4.8) Logic 7.2Well a fellow Las Vegan, that is something I
havent seen since I have been on this forum.
Anyway welcome and good choice to go with
Logic Pro 7. This app is a constant challenge.
First I have to ask an obvious question, did you
install the contents disc? That is the one with all
the samples on it. Since you have been using a
different version, I assume you know how the
EXS works so that should not be the issue.
If you click on the black area no menus come up?
Or do empty menus come up? We will get it going,
this sounds like misplaced files. Phil -
I have installed osx mountain lion, it worked great for past months but recently, my mac takes lots of time to startup and sometimes gets stuck.. what should i do??
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
System Preferences > Startup Disk
Select your Startup Disk -
My microphone is not working on my IPAD 4... I can't figure out if the problem has something to do when i updated the version. It's version is 7.0.4. Please help me coz i cant my sister in HK can't hear me on skype. It's our only way of keeping in touch. Im so helpless. Please help me. Thank u and God bless everyone.
Have you tried reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
please help, my ipad mini is gone into to recovery mode after updating to iOS8.1 and even though I restored it through iTunes it still will not come out of recovery mode
Try a Reboot press & hold menu button & power button hold both down until you see Apple Logo you will not lose any data. But you may need to do this more than once. I never use PCs for software upgrades or downloads I always use wifi had no problems with iOS 8.1 B sydd
-
I bought an ipad from some one and i can't activate it and it keeps on showing that i should type the apple id and password link to that ipad which i dont know and i can't even locate thi guy. Please help if there is a chance to activate the ipad. Thanks
There is no chance at all that you can activate the iPad without the previous user's Apple ID and password. That is the feature of iOS 7 Activation Lock.
Every time I read one of these post, I can't help but think that the user asking about this (in this case - you) was duped into purchasing a stolen device. If the seller was legit, they would have erased the device completely before they sold it. -
please help my ipad just rebooted after me turnng it on and it is in wat people call a endless reboot mode where it wont start up please help
Hi Patkid27,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Cheers,
- Judy -
hello, my ipad mini doent work i charged it till the next day and it didn't work i charged it again till the next day and it didn't work what should i do i didn't use my ipad for three days please i need help????
Didn't work in what way. Are you unable to start it up? Does it start but then freezes? Does the screen stay black when you turn it on?
Try this - press the home and power buttons and keep pressing them until the apple logo appears.
Maybe you are looking for
-
Right clicking in flash player now brings up pop up menu.
Previously I was able to right click within the flash player while playing a video game, which enabled certain game commands. Now suddenly that functionality has gone away and the settings menu continues to come up every time I try it. The Flash Pl
-
Parse of Date based conditions has broken since installing FP3.2
Just upgraded an AIX BO3.1 sp3 box to Fix Pack 3.2 (both BOE and BOE SAP Integration) Have a mandatory filter object based on a date - format being DD.MM.YYYY. Am now getting the following error when parsing the Universe on a fp32 client... Parse Fai
-
IBots: Save report as CSV file on to a disk using iBot
Hi Experts, The requirement is to configure an iBot, which saves a report as CSV flie at a give address on hard drive (eg: C:\iBots\files\my_report.csv). this file must be updated every week. thanks in advance for ur help, Surya
-
How to count of Functional Locations
Hello Experts, Could you please advise me how to count a Functional Locations in Plant Maintenance module? I would like to find and amount of Functional Locations which are:: 1. Assigned for particular plant 2. In status Active 3. In status inactive
-
System upgrade z77 based machine - new Disks/SSD + new graphics card £1500 budget
Hello all, I've read so many threads I am totaly confused now over how best to upgrade my machine. I'm a photographer moving into DSLR shooting and editing on premier pro. My machine is 2 years old and I think OK to upgrade but many threads and curre