Please verify the CSS and SCA configuration for one-armed transparent mode

Question

I have a problem to configure one-armed transparent mode. I cannot access the server with "https://9.9.9.1" even "http://9.9.9.1:80" and "http://9.9.9.1:81" operational. looks CSS cannot communicate properly with SCA.
I couldn't figure out from CCO sample configuration. please correct the attached configuraiton.
Thanks,
** connectivity ********
<client>----<router>----<CSS>---<SCA>,<Server>
- client=7.7.7.100
- router's e0/0=7.7.7.1, e0/1=8.8.8.3(connect to VLAN2 of CSS)
- SCA=11.11.11.100, connect to VLAN3 of CSS
- server=10.147.153.12 and 10.147.153.15 on the same box, connect to VLAN4 of CSS
** configuration *********
CSS11050# sh run
!Generated on 01/01/2079 00:00:47
!Active version: ap0500105
configure
!*************************** GLOBAL ***************************
acl enable
ip route 0.0.0.0 0.0.0.0 11.11.11.100 1
ip route 7.7.7.100 255.255.255.255 8.8.8.3 1
ip route 7.7.7.200 255.255.255.255 8.8.8.3 1
!************************* INTERFACE *************************
interface e2
bridge vlan 2
interface e3
bridge vlan 3
interface e4
bridge vlan 4
interface e5
bridge vlan 4
!************************** CIRCUIT **************************
circuit VLAN1
ip address 9.9.9.2 255.255.255.0
circuit VLAN2
ip address 8.8.8.2 255.255.255.0
circuit VLAN3
ip address 11.11.11.1 255.255.255.0
circuit VLAN4
ip address 10.147.153.1 255.255.255.0
!************************** SERVICE **************************
service ING_SVC_12
protocol tcp
ip address 10.147.153.12
active
service ING_SVC_15
protocol tcp
ip address 10.147.153.15
active
service ING_SVC_SCA
port 443
protocol tcp
ip address 11.11.11.100
type transparent-cache
no cache-bypass
active
service upstream
ip address 8.8.8.3
type transparent-cache
active
!*************************** OWNER ***************************
owner ING_OWNER
content cnt_443
add service ING_SVC_SCA
protocol tcp
port 443
vip address 9.9.9.1
active
content cnt_80
add service ING_SVC_12
add service ING_SVC_15
protocol tcp
port 80
url "/*"
vip address 9.9.9.1
active
content cnt_81
add service ING_SVC_12
add service ING_SVC_15
vip address 9.9.9.1
protocol tcp
port 81
url "/*" <-- If I configure url "/secure/*", not working "http://9.9.9.1:81" from client.
active
!**************************** ACL ****************************
acl 1
clause 10 permit any any destination any
apply circuit-(VLAN1)
acl 2
clause 10 permit any any destination any
apply circuit-(VLAN2)
acl 3
clause 10 permit any any destination any
apply circuit-(VLAN3)
acl 4
clause 10 permit any any destination any
apply circuit-(VLAN4)
ING_SCA# sh run
# Cisco SCA Device Configuration File
# Written: Sun Feb 6 01:12:54 2106 MST
# Inxcfg: version 4.1 build 200211151311
# Device Type: CSS-SCA
# Device Id: S/N 11aca8
# Device OS: MaxOS version 4.1.0 build 200211151311 by reading
### Mode ###
mode one-port
### Interfaces ###
interface network
auto
end
interface server
auto
end
### Device ###
ip address 11.11.11.100 netmask 255.255.255.0
hostname ING_SCA
timezone "MST7MDT"
### Password ###
password idle-timeout 15
### SNTP ###
sntp interval 86400
### Static Routes ###
ip route 0.0.0.0 0.0.0.0 11.11.11.1 metric 1
### RIP ###
no rip
### DNS ###
no ip name-server
no ip domain-name
### Telnet ###
telnet enable
### Web Management ###
web-mgmt port 80
no web-mgmt enable
### SNMP Subsystem ###
no snmp
### SSL Subsystem ###
ssl
server ING create
ip address 9.9.9.1
localport 443
remoteport 81
key default
cert default
secpolicy default
sslv2 enable
sslv3 enable
tlsv1 enable
session-cache size 20480
session-cache timeout 300
session-cache enable
no clientauth enable
clientauth verifydepth 1
clientauth error cert-other-error fail
clientauth error cert-not-provided fail
clientauth error cert-has-expired fail
clientauth error cert-not-yet-valid fail
clientauth error cert-has-invalid-ca fail
clientauth error cert-has-signature-failure fail
clientauth error cert-revoked fail
sharedcipher error failhtml
ephemeral error failhtml
no httpheader client-cert
no httpheader server-cert
no httpheader session
no httpheader pre-filter
httpheader prefix "SSL"
ephrsa
keepalive frequency 5
keepalive maxfailure 3
no keepalive enable
end
end

Answer 1

the problem is the routing.
You need a route for the client pointing to the SCA like this
ip route 7.7.7.100 255.255.255.255 11.11.11.100 1
This is so the reply from the server to the client goes back to the SCA first
for encryption.
Gilles.