PLM Design to Release PIP Installation Issue

Hi,
I was trying to install PLM Design to Release PIP on existing installation of FP2.4 on Linux.
Installation went successful through GUI but when I was doing verification as per installation document I found that some of the EBS Service and BPEL Processes are not deployed.
There are may errors in installation log file log file like "CommonComponents.xsd:265:48: src-resolve: Cannot resolve the name 'IdentificationType' to a(n) 'type definition' component"
But there is no error regarding specific processes which have not got deployed .
Basically ABCSImpl and ABCS services are not visible/deployed.
Let me know if anybody has came across this issue and possible solution.
Regards
Shyam

Hello Shyam,
I am pretty new with this Integration - Agile 9.2.2.4 & Oracle EBS 12.1.1 . I have just gone through the Installation Guide for Oracle Application Integration Architecture 2.2. I have started downloading the necessary products from E-Delivery.
I am planning to install everything from scratch on windows 2003. With your experience could you give me some tips (do's & do-not's, right version, patches, sequence) that I should consider during the installation process?
Thanks,
Sam

Similar Messages

Design Premium CS 5 installation issues

Hi All,
I have downloaded the trial version for Design Premium CS 5 and tried to install it. When I choose the path to install, it goes to next screen and after some time, it says "Insert the Design Premium CS5 English DVD". I tried by burning the downloaded trial exe in a DVD too. It is not working. Can anybody suggest me a good way t install the trial version.
Thanks in advance,
Bal

If you have downloaded the installer to your local disk and run it from there it should not prompt for the DVD unless there was a problem with the download. You may want to download it again and retry.

Oracle 10g Database Release 1 Installation Issue

Hi:
The install seems to finish everything without a problem except when it's configuring the Configuration Assistants, specifically the Oracle Database Configuration Assistants (after succeeding Oracle Net Configuration Assistant and iSQL*Plus Configuration Assistant).
The configuration stopped at 2% during the progress as it's copying database files (cloning database creation) and a pop-up flagged "ORA-12638: Credential retrieval failed". If I click "Ignore" then the same message will come up again. I can keep clicking ignore to have it finished the process but at the end it will flag: "Enterprise manager configuration failed due to the following error - 'job_queue_processes' must be greater than or equal to 1..." Then the install showed the configuration "Succeeded" and I exited out of the install.
When I open the Oracle Enterprise Manager Console from the Oracle Client package options of the Windows Start Menu and try to connect to the ORCL_LOCALHOST database, I typed in the default username and password that was assigned during the install ("orcl" and "orcl") and I pop-up warned that "SID given in connect descriptor could not be resolved." Does anyone know what goes wrong here? I have selected all the default option during the install except I have selected a single password for multiple databse items and assigned the single password "orcl" for all instances. Hence "orcl" is the only term I have used for username, database name, SID and password. Will that generate an issue or there's another problem that's affecting my progress.
My ultimate goal is to be able to connect to the database and create some schemas. Hope this details my problem and please feel free to request more info if necessary. Thanks and have a nice day.

The configuration stopped at 2% during the progress
as it's copying database files (cloning database
creation) and a pop-up flagged "ORA-12638: Credential
retrieval failed". If I click "Ignore" then the same
message will come up again. I can keep clicking
ignore to have it finished the process but at the end
it will flag: "Enterprise manager configuration
failed due to the following error -I had the same problem with installing 10g R2 on Windows.
I got around it by editing the network/admin/sqlnet.ora file as follows:SQLNET.AUTHENTICATION_SERVICES= (NONE)
and running the config assistant manually (./bin/dbca.bat, accepting all defaults).
hope that helps!
-- Bill

Designer 6i Release 2 makes Oracle 8.1.7 installation impossible!!!

Hi,
Designer 6i Release 2 makes Oracle 8.1.7 installation impossibleon Windows 2000 Server!!!
After I uninstalled Designer 6i Rel2 through the Oracle Installer and then manually deleted all the left directories and Oracle registry entries I found HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES\ID0\"\Registry Backup" entries that are not removable! Designer documentation says it's OK and that it won't do any harm. But it does! I have absolutely "Oracle free" machine, and why I try install Oracle 8.1.7, Oracle Installer pops up and after I click on "install products" closes and nothing happens.
Please, help me:
1) delete these registry entries;
2) maybe there are some dlls I need to delete in order to make Oracle 8.1.7 work.
P.S. I have to mention that Oracle Forms developer 6i Rel 2 was installed on top of the Designer in the same home (only Client Forms and Reports). But I cleaned up everything as described erlier.
I think, it is critical not only for me to solve this problem ASAP.
Thank you.

Hello guys
I had this problems for weeks, I could not reinstall Oracle 8.1.7 on Windows 2000 Advanced Server with the Universal Installer, it was all the time frozing after the splash screen. In my registry, I found the unremovable oracle entries (3) HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES\ID0\"\Registry Backup". Here is what I did to clean (sort of) the registry. By the way, reinstalling Win2K was out of the question.
I download Resplendence Registar 2.03 from http://www.resplendence.com. I made a binary backup of my registry using RR. Then I edit the backup with an hex editor (I use textpad from http://www.textpad.com). I search for the oracle entries (ORACLE in uppercase), found two. I replace them with ZZZZZZ. I saved the file and restored the registry with RR. Now, I have a ZZZZZZ unremovable entry, but it does not interfere with the Oracle Universal Installer. I was then able to reinstall Oracle 8.1.7 and Designer6i.
Now, I have a new problem. I have two oracle home
OEE with Oracle8i EE 8.1.7
ORANT with Oracle Designer6i
When I try to connect to my remote database Oracle8i EE 8.1.6 on Linux with SQL*Plus 8.1.7 everything is OK. But when I try to connect using SQL*Plus 8.0.6 that comes with Designer6i I get the error ORA-12571: TNS:packet writer failure. The config files tnsnames.ora and sqlnet.ora are the same on both oracle homes. If you have any clues, please let me known, I'm out of them.
PS After 12 years working with Oracle products, this is my worst year. The product development it totally out of control. The products are huge, buggy, incomplete and incompatible. I hope we will survive this storm :o)

CS6 Web and Design Installation issues

I'm having installation issues with cs6 web and design. Purchased two downloads of the software for mac, but after attempting to download all day, now it's saying I can't open the download because it isn't recognized by my computer. Been at this all day, so frustrated. Any help?

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

Another Adobe Air installation issue

I've tried removing the following directories and still get an error while installing.
C:\Program Files\Common Files\Adobe AIR
     C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com
     C:\Users\phil\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com
     C:\Users\phil\AppData\Local\Adobe\AIR
     C:\Users\phil\AppData\Roaming\Adobe\AIR
     C:\ProgramData\Adobe\AIR
Yes, I ran it as administrator but not the default admin account. Phil's account has administrative privileges.
[2011-09-20:18:00:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:00:52] Commandline is: -x1 file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:00:52] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-20:18:00:52] Invoking Application Installer for combined install
[2011-09-20:18:00:52] Launching subprocess with commandline C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -withRuntime -url file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:00:52] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:00:52] Commandline is: -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -withRuntime -url file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:00:52] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-20:18:00:53] Unpackaging file:///C:/Users/phil/Downloads/LIFR-1.1.0.air to C:\Users\phil\AppData\Local\Temp\fla41C0.tmp
[2011-09-20:18:00:55] Application signature verified
[2011-09-20:18:00:55] Unpackaging/validation complete
[2011-09-20:18:00:55] No app located for appID 'com.amz.retirementplanner' and pubID ''
[2011-09-20:18:01:10] Converting unpackaged application to a native installation package in C:\Users\phil\AppData\Local\Temp\fla841F.tmp
[2011-09-20:18:01:11] Native installation package creation succeeded
[2011-09-20:18:01:11] Launching subprocess with commandline C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:01:11] Relaunching with elevation
[2011-09-20:18:01:14] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:01:14] Commandline is: -stdio \\.\pipe\AIR_3948_0 -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:01:14] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-20:18:01:15] Unpackaging file:///C:/Users/phil/Downloads/LIFR-1.1.0.air to C:\Users\phil\AppData\Local\Temp\fla98F4.tmp
[2011-09-20:18:01:17] Application signature verified
[2011-09-20:18:01:17] Unpackaging/validation complete
[2011-09-20:18:01:17] No app located for appID 'com.amz.retirementplanner' and pubID ''
[2011-09-20:18:01:17] Converting unpackaged application to a native installation package in C:\Users\phil\AppData\Local\Temp\flaA064.tmp
[2011-09-20:18:01:18] Native installation package creation succeeded
[2011-09-20:18:01:18] Starting silent combined runtime update and app install.
Updating runtime from version 1.5.0.7220 to version 2.7.1.19610.
Installing app com.amz.retirementplanner version 1.1.0 to C:\Program Files (x86) using the source file at file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:01:19] Installing msi at C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-20:18:01:24] Installing msi at C:\Users\phil\AppData\Local\Temp\flaA064.tmp\setup.msi with guid {05E8C32F-06A7-1EF5-81B0-485BEAFD69AB}
[2011-09-20:18:01:28] Application Installer end with exit code 0
[2011-09-20:18:01:28] Elevated install completed
[2011-09-20:18:01:28] Launching subprocess with commandline C:\Program Files (x86)\LIFR Retirement Planner 1.1\LIFR Retirement Planner 1.1.exe
[2011-09-20:18:01:29] Application Installer end with exit code 0
[2011-09-20:18:01:29] Subprocess app installer succeeded
[2011-09-20:18:01:29] Runtime Installer end with exit code 0
[2011-09-20:18:05:59] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:05:59] Commandline is:
[2011-09-20:18:05:59] No installed runtime detected
[2011-09-20:18:06:03] Relaunching with elevation
[2011-09-20:18:06:03] Launching subprocess with commandline c:\users\phil\appdata\local\temp\aire262.tmp\adobe air installer.exe -ei
[2011-09-20:18:06:07] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:06:07] Commandline is: -stdio \\.\pipe\AIR_3744_0 -ei
[2011-09-20:18:06:07] No installed runtime detected
[2011-09-20:18:06:07] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-20:18:06:07] Installing msi at c:\users\phil\appdata\local\temp\aire262.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-20:18:06:07] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:07] Rolling back install of c:\users\phil\appdata\local\temp\aire262.tmp\setup.msi
[2011-09-20:18:06:07] Rollback complete
[2011-09-20:18:06:07] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:07] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:07] Runtime Installer end with exit code 7
[2011-09-20:18:06:11] Runtime Installer end with exit code 7
[2011-09-20:18:06:30] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-20:18:06:30] Commandline is:
[2011-09-20:18:06:30] No installed runtime detected
[2011-09-20:18:06:34] Relaunching with elevation
[2011-09-20:18:06:34] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5b97.tmp\adobe air installer.exe -ei
[2011-09-20:18:06:37] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:06:37] Commandline is: -stdio \\.\pipe\AIR_1032_0 -ei
[2011-09-20:18:06:37] No installed runtime detected
[2011-09-20:18:06:37] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-20:18:06:37] Installing msi at c:\users\phil\appdata\local\temp\air5b97.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-20:18:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:37] Rolling back install of c:\users\phil\appdata\local\temp\air5b97.tmp\setup.msi
[2011-09-20:18:06:37] Rollback complete
[2011-09-20:18:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:37] Runtime Installer end with exit code 7
[2011-09-20:18:06:44] Runtime Installer end with exit code 7
[2011-09-21:06:20:28] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:20:28] Commandline is:
[2011-09-21:06:20:28] No installed runtime detected
[2011-09-21:06:20:32] Relaunching with elevation
[2011-09-21:06:20:32] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air4ee8.tmp\adobe air installer.exe -ei
[2011-09-21:06:20:36] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:20:36] Commandline is: -stdio \\.\pipe\AIR_5268_0 -ei
[2011-09-21:06:20:36] No installed runtime detected
[2011-09-21:06:20:36] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:20:36] Installing msi at c:\users\phil\appdata\local\temp\air4ee8.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:20:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:20:37] Rolling back install of c:\users\phil\appdata\local\temp\air4ee8.tmp\setup.msi
[2011-09-21:06:20:37] Rollback complete
[2011-09-21:06:20:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:20:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:20:37] Runtime Installer end with exit code 7
[2011-09-21:06:20:45] Runtime Installer end with exit code 7
[2011-09-21:06:39:03] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:39:03] Commandline is:
[2011-09-21:06:39:03] No installed runtime detected
[2011-09-21:06:39:23] Relaunching with elevation
[2011-09-21:06:39:23] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5445.tmp\adobe air installer.exe -ei
[2011-09-21:06:39:29] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:39:29] Commandline is: -stdio \\.\pipe\AIR_7016_0 -ei
[2011-09-21:06:39:29] No installed runtime detected
[2011-09-21:06:39:29] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:39:29] Installing msi at c:\users\phil\appdata\local\temp\air5445.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:39:30] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:39:30] Rolling back install of c:\users\phil\appdata\local\temp\air5445.tmp\setup.msi
[2011-09-21:06:39:30] Rollback complete
[2011-09-21:06:39:30] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:39:30] Runtime Installer end with exit code 7
[2011-09-21:06:39:40] Runtime Installer end with exit code 7
[2011-09-21:06:41:16] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:06:41:16] Commandline is:
[2011-09-21:06:41:16] No installed runtime detected
[2011-09-21:06:41:23] Relaunching with elevation
[2011-09-21:06:41:23] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5f4d.tmp\adobe air installer.exe -ei
[2011-09-21:06:41:32] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:41:32] Commandline is: -stdio \\.\pipe\AIR_5904_0 -ei
[2011-09-21:06:41:32] No installed runtime detected
[2011-09-21:06:41:32] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:41:32] Installing msi at c:\users\phil\appdata\local\temp\air5f4d.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:41:32] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:41:32] Rolling back install of c:\users\phil\appdata\local\temp\air5f4d.tmp\setup.msi
[2011-09-21:06:41:32] Rollback complete
[2011-09-21:06:41:32] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:41:32] Runtime Installer end with exit code 7
[2011-09-21:06:41:41] Runtime Installer end with exit code 7
[2011-09-21:06:46:44] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:06:46:44] Commandline is:
[2011-09-21:06:46:44] No installed runtime detected
[2011-09-21:06:46:52] Relaunching with elevation
[2011-09-21:06:46:52] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5aca.tmp\adobe air installer.exe -ei
[2011-09-21:06:46:56] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:46:56] Commandline is: -stdio \\.\pipe\AIR_6308_0 -ei
[2011-09-21:06:46:56] No installed runtime detected
[2011-09-21:06:46:56] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:46:56] Installing msi at c:\users\phil\appdata\local\temp\air5aca.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:46:56] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:46:56] Rolling back install of c:\users\phil\appdata\local\temp\air5aca.tmp\setup.msi
[2011-09-21:06:46:56] Rollback complete
[2011-09-21:06:46:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:46:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:46:58] Runtime Installer end with exit code 7
[2011-09-21:06:54:29] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:06:54:29] Commandline is:
[2011-09-21:06:54:29] No installed runtime detected
[2011-09-21:06:54:33] Relaunching with elevation
[2011-09-21:06:54:33] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air7942.tmp\adobe air installer.exe -ei
[2011-09-21:06:54:35] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:54:35] Commandline is: -stdio \\.\pipe\AIR_4300_0 -ei
[2011-09-21:06:54:35] No installed runtime detected
[2011-09-21:06:54:36] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:54:36] Installing msi at c:\users\phil\appdata\local\temp\air7942.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:54:36] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:54:36] Rolling back install of c:\users\phil\appdata\local\temp\air7942.tmp\setup.msi
[2011-09-21:06:54:36] Rollback complete
[2011-09-21:06:54:36] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:54:36] Runtime Installer end with exit code 7
[2011-09-21:06:54:38] Runtime Installer end with exit code 7
[2011-09-21:08:29:22] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:29:22] Commandline is:
[2011-09-21:08:29:22] No installed runtime detected
[2011-09-21:08:29:25] Relaunching with elevation
[2011-09-21:08:29:25] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air556f.tmp\adobe air installer.exe -ei
[2011-09-21:08:29:29] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:29:29] Commandline is: -stdio \\.\pipe\AIR_7108_0 -ei
[2011-09-21:08:29:29] No installed runtime detected
[2011-09-21:08:29:29] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:29:29] Installing msi at c:\users\phil\appdata\local\temp\air556f.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:29:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:29:29] Rolling back install of c:\users\phil\appdata\local\temp\air556f.tmp\setup.msi
[2011-09-21:08:29:29] Rollback complete
[2011-09-21:08:29:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:29:29] Runtime Installer end with exit code 7
[2011-09-21:08:34:00] Runtime Installer end with exit code 7
[2011-09-21:08:36:08] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:08] Commandline is:
[2011-09-21:08:36:08] No installed runtime detected
[2011-09-21:08:36:11] Relaunching with elevation
[2011-09-21:08:36:11] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air7bf3.tmp\adobe air installer.exe -ei
[2011-09-21:08:36:13] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:13] Commandline is: -stdio \\.\pipe\AIR_6760_0 -ei
[2011-09-21:08:36:13] No installed runtime detected
[2011-09-21:08:36:13] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:36:13] Installing msi at c:\users\phil\appdata\local\temp\air7bf3.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:36:13] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:13] Rolling back install of c:\users\phil\appdata\local\temp\air7bf3.tmp\setup.msi
[2011-09-21:08:36:13] Rollback complete
[2011-09-21:08:36:13] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:13] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:13] Runtime Installer end with exit code 7
[2011-09-21:08:36:15] Runtime Installer end with exit code 7
[2011-09-21:08:36:45] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:45] Commandline is:
[2011-09-21:08:36:45] No installed runtime detected
[2011-09-21:08:36:49] Relaunching with elevation
[2011-09-21:08:36:49] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air13de.tmp\adobe air installer.exe -ei
[2011-09-21:08:36:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:52] Commandline is: -stdio \\.\pipe\AIR_4472_0 -ei
[2011-09-21:08:36:52] No installed runtime detected
[2011-09-21:08:36:52] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:36:52] Installing msi at c:\users\phil\appdata\local\temp\air13de.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:36:52] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:52] Rolling back install of c:\users\phil\appdata\local\temp\air13de.tmp\setup.msi
[2011-09-21:08:36:52] Rollback complete
[2011-09-21:08:36:52] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:52] Runtime Installer end with exit code 7
[2011-09-21:08:36:52] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:37:03] Runtime Installer end with exit code 7
[2011-09-21:08:37:53] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:37:53] Commandline is:
[2011-09-21:08:37:53] No installed runtime detected
[2011-09-21:08:37:54] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:37:54] Commandline is:
[2011-09-21:08:37:54] No installed runtime detected
[2011-09-21:08:37:55] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:37:55] Commandline is:
[2011-09-21:08:37:55] No installed runtime detected
[2011-09-21:08:38:01] Relaunching with elevation
[2011-09-21:08:38:01] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air18cd.tmp\adobe air installer.exe -ei
[2011-09-21:08:38:11] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:38:11] Commandline is: -stdio \\.\pipe\AIR_3020_0 -ei
[2011-09-21:08:38:11] No installed runtime detected
[2011-09-21:08:38:11] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:38:11] Installing msi at c:\users\phil\appdata\local\temp\air18cd.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:38:11] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:11] Rolling back install of c:\users\phil\appdata\local\temp\air18cd.tmp\setup.msi
[2011-09-21:08:38:11] Rollback complete
[2011-09-21:08:38:11] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:11] Runtime Installer end with exit code 7
[2011-09-21:08:38:13] Runtime Installer end with exit code 7
[2011-09-21:08:38:20] Relaunching with elevation
[2011-09-21:08:38:20] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air2903.tmp\adobe air installer.exe -ei
[2011-09-21:08:38:22] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:38:22] Commandline is: -stdio \\.\pipe\AIR_6784_0 -ei
[2011-09-21:08:38:22] No installed runtime detected
[2011-09-21:08:38:22] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:38:22] Installing msi at c:\users\phil\appdata\local\temp\air2903.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:38:22] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:22] Rolling back install of c:\users\phil\appdata\local\temp\air2903.tmp\setup.msi
[2011-09-21:08:38:22] Rollback complete
[2011-09-21:08:38:22] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:22] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:22] Runtime Installer end with exit code 7
[2011-09-21:08:38:23] Runtime Installer end with exit code 7
[2011-09-21:08:38:25] Relaunching with elevation
[2011-09-21:08:38:25] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air1b7c.tmp\adobe air installer.exe -ei
[2011-09-21:08:38:27] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:38:27] Commandline is: -stdio \\.\pipe\AIR_4472_0 -ei
[2011-09-21:08:38:27] No installed runtime detected
[2011-09-21:08:38:27] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:38:27] Installing msi at c:\users\phil\appdata\local\temp\air1b7c.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:38:27] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:27] Rolling back install of c:\users\phil\appdata\local\temp\air1b7c.tmp\setup.msi
[2011-09-21:08:38:27] Rollback complete
[2011-09-21:08:38:27] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:27] Runtime Installer end with exit code 7
[2011-09-21:08:38:38] Runtime Installer end with exit code 7
[2011-09-21:08:38:58] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:38:58] Commandline is:
[2011-09-21:08:38:58] No installed runtime detected
[2011-09-21:08:39:02] Relaunching with elevation
[2011-09-21:08:39:02] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air22cc.tmp\adobe air installer.exe -ei
[2011-09-21:08:39:04] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:39:04] Commandline is: -stdio \\.\pipe\AIR_7868_0 -ei
[2011-09-21:08:39:04] No installed runtime detected
[2011-09-21:08:39:05] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:39:05] Installing msi at c:\users\phil\appdata\local\temp\air22cc.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:39:05] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:05] Rolling back install of c:\users\phil\appdata\local\temp\air22cc.tmp\setup.msi
[2011-09-21:08:39:05] Rollback complete
[2011-09-21:08:39:05] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:05] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:05] Runtime Installer end with exit code 7
[2011-09-21:08:39:08] Runtime Installer end with exit code 7
[2011-09-21:08:39:37] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:39:37] Commandline is:
[2011-09-21:08:39:37] No installed runtime detected
[2011-09-21:08:39:43] Relaunching with elevation
[2011-09-21:08:39:43] Launching subprocess with commandline c:\users\phil\appdata\local\temp\airb885.tmp\adobe air installer.exe -ei
[2011-09-21:08:39:46] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:39:46] Commandline is: -stdio \\.\pipe\AIR_6488_0 -ei
[2011-09-21:08:39:46] No installed runtime detected
[2011-09-21:08:39:46] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:39:46] Installing msi at c:\users\phil\appdata\local\temp\airb885.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:39:47] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:47] Rolling back install of c:\users\phil\appdata\local\temp\airb885.tmp\setup.msi
[2011-09-21:08:39:47] Rollback complete
[2011-09-21:08:39:47] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:47] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:47] Runtime Installer end with exit code 7
[2011-09-21:08:42:54] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:42:54] Commandline is:
[2011-09-21:08:42:54] No installed runtime detected
[2011-09-21:08:42:58] Relaunching with elevation
[2011-09-21:08:42:58] Launching subprocess with commandline c:\users\phil\appdata\local\temp\airba4a.tmp\adobe air installer.exe -ei
[2011-09-21:08:43:01] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:43:01] Commandline is: -stdio \\.\pipe\AIR_7176_0 -ei
[2011-09-21:08:43:01] No installed runtime detected
[2011-09-21:08:43:01] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:43:01] Installing msi at c:\users\phil\appdata\local\temp\airba4a.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:43:01] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:43:01] Rolling back install of c:\users\phil\appdata\local\temp\airba4a.tmp\setup.msi
[2011-09-21:08:43:01] Rollback complete
[2011-09-21:08:43:01] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:43:02] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:43:02] Runtime Installer end with exit code 7
[2011-09-21:08:43:03] Runtime Installer end with exit code 7
[2011-09-21:08:43:09] Runtime Installer end with exit code 7
[2011-09-21:08:48:47] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:48:47] Commandline is:
[2011-09-21:08:48:47] No installed runtime detected
[2011-09-21:08:48:55] Relaunching with elevation
[2011-09-21:08:48:55] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air1b9b.tmp\adobe air installer.exe -ei
[2011-09-21:08:48:55] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:48:55] Commandline is: -stdio \\.\pipe\AIR_5568_0 -ei
[2011-09-21:08:48:55] No installed runtime detected
[2011-09-21:08:48:56] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:48:56] Installing msi at c:\users\phil\appdata\local\temp\air1b9b.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:48:56] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:48:56] Rolling back install of c:\users\phil\appdata\local\temp\air1b9b.tmp\setup.msi
[2011-09-21:08:48:56] Rollback complete
[2011-09-21:08:48:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:48:56] Runtime Installer end with exit code 7
[2011-09-21:08:49:26] Runtime Installer end with exit code 7
[2011-09-21:08:56:37] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:56:37] Commandline is:
[2011-09-21:08:56:37] No installed runtime detected
[2011-09-21:08:59:53] Relaunching with elevation
[2011-09-21:08:59:53] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air41b1.tmp\adobe air installer.exe -ei
[2011-09-21:08:59:53] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:59:53] Commandline is: -stdio \\.\pipe\AIR_5656_0 -ei
[2011-09-21:08:59:53] No installed runtime detected
[2011-09-21:08:59:53] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:59:53] Installing msi at c:\users\phil\appdata\local\temp\air41b1.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:59:53] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:59:53] Rolling back install of c:\users\phil\appdata\local\temp\air41b1.tmp\setup.msi
[2011-09-21:08:59:53] Rollback complete
[2011-09-21:08:59:53] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:59:53] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:59:53] Runtime Installer end with exit code 7
[2011-09-21:09:07:06] Runtime Installer end with exit code 7
[2011-09-21:09:07:39] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:09:07:39] Commandline is:
[2011-09-21:09:07:39] No installed runtime detected
[2011-09-21:09:07:44] Relaunching with elevation
[2011-09-21:09:07:44] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air62c8.tmp\adobe air installer.exe -ei
[2011-09-21:09:07:44] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:09:07:44] Commandline is: -stdio \\.\pipe\AIR_7504_0 -ei
[2011-09-21:09:07:44] No installed runtime detected
[2011-09-21:09:07:44] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:09:07:44] Installing msi at c:\users\phil\appdata\local\temp\air62c8.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:09:07:44] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:09:07:44] Rolling back install of c:\users\phil\appdata\local\temp\air62c8.tmp\setup.msi
[2011-09-21:09:07:44] Rollback complete
[2011-09-21:09:07:44] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:09:07:44] Runtime Installer end with exit code 7
[2011-09-21:09:07:59] Runtime Installer end with exit code 7

I'm sorry you're running into installation issues with AIR. Microsoft has just released a new utility that can help resolve installation problems. Would you mind giving this a try and let us know how it works for you? When running the Fix it, go through the uninstall process and try to remove Adobe AIR from your system. Once finished, download the latest version of AIR and install again.
Microsoft Install and Uninstall Fix It
If you still encounter problems, I created a vb script called AIR zapper that might also help. You can find it on this post: http://forums.adobe.com/message/3737276#3737276
Thanks,
Chris

Designer 6i Release 2 : Client

i downloaded Designer 6i Release 2 from technet. i am now reading the Installation Guide and it seems that for the 'Client and Server on separate machines' configurations they support, the client can only have Windows NT or 2000. i only have Windows 98 on my laptop and a 8.1.6 database on a Linux box on the office network. is it therefore a lost cause ?
thanks,
Briti
null

Hi,
I (think) it's possible to install the client on Windows 98 (but this is not a supported configuration).
You should see the "Known Problems and Restrictions" section in the Release notes:
http://otn.oracle.com/docs/products/designer/doc_library/6i_release2/deshlp72/des2k_relnotes/rn_des_6i.htm
The Repository will work fine on an 8.1.6 Oracle Linux installation.
Brian

Error when installing Oracle Designer/SCM Release 9.0.2.6 patch

Hi.
I am trying to install Oracle Designer/SCM Release 9.0.2.6 patch. I've already installed Oracle 9i Forms and Reports 9.0.2.1.0 (patch 2705870) and 9.0.2.3.0 (patch 3129219). The Oracle Installer version is 2.2.0.18.0, but when I try to install Designer/SCM Release 9.0.2.6.0, which uses Oracle Installer version is 2.3.0.0.0, I get the following error in my hs_err log file:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0xff12ed8
Function name=CallWndProcFunc
Library=C:\WINDOWS\System32\SHW95DLL.DLL
Current Java thread:
     at sun.awt.windows.WToolkit.eventLoop(Native Method)
     at sun.awt.windows.WToolkit.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00405000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\javaw.exe
0x77F50000 - 0x77FF7000      C:\WINDOWS\System32\ntdll.dll
0x77E60000 - 0x77F46000      C:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E5D000      C:\WINDOWS\system32\ADVAPI32.dll
0x78000000 - 0x78086000      C:\WINDOWS\system32\RPCRT4.dll
0x77D40000 - 0x77DCC000      C:\WINDOWS\system32\USER32.dll
0x77C70000 - 0x77CB0000      C:\WINDOWS\system32\GDI32.dll
0x77C10000 - 0x77C63000      C:\WINDOWS\system32\MSVCRT.dll
0x6D420000 - 0x6D4EE000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\hotspot\jvm.dll
0x76B40000 - 0x76B6C000      C:\WINDOWS\System32\WINMM.dll
0x6D220000 - 0x6D227000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\hpi.dll
0x6D3B0000 - 0x6D3BD000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\verify.dll
0x6D250000 - 0x6D266000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\java.dll
0x6D3C0000 - 0x6D3CD000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\zip.dll
0x6D020000 - 0x6D128000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\awt.dll
0x73000000 - 0x73023000      C:\WINDOWS\System32\WINSPOOL.DRV
0x76390000 - 0x763AC000      C:\WINDOWS\System32\IMM32.dll
0x771B0000 - 0x772D1000      C:\WINDOWS\system32\ole32.dll
0x6D1E0000 - 0x6D21B000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\fontmanager.dll
0x5ED00000 - 0x5EDC6000      C:\WINDOWS\System32\OPENGL32.dll
0x68B20000 - 0x68B3E000      C:\WINDOWS\System32\GLU32.dll
0x51000000 - 0x51047000      C:\WINDOWS\System32\DDRAW.dll
0x73BC0000 - 0x73BC6000      C:\WINDOWS\System32\DCIMAN32.dll
0x10000000 - 0x101CA000      C:\WINDOWS\System32\ialmgicd.dll
0x0FDB0000 - 0x0FDE0000      C:\WINDOWS\System32\ialmgdev.dll
0x74720000 - 0x74764000      C:\WINDOWS\System32\MSCTF.dll
0x0FF10000 - 0x0FF2F000      C:\WINDOWS\System32\SHW95DLL.DLL
0x0FFB0000 - 0x0FFF1000      C:\WINDOWS\system32\WOW32.dll
0x75F40000 - 0x75F5F000      C:\WINDOWS\system32\appHelp.dll
0x773D0000 - 0x77BC2000      C:\WINDOWS\system32\SHELL32.dll
0x63180000 - 0x631E5000      C:\WINDOWS\system32\SHLWAPI.dll
0x181D0000 - 0x18271000      C:\WINDOWS\System32\ntvdm.exe
0x763B0000 - 0x763F5000      C:\WINDOWS\system32\comdlg32.dll
0x77340000 - 0x773CB000      C:\WINDOWS\system32\COMCTL32.dll
0x77C00000 - 0x77C07000      C:\WINDOWS\system32\VERSION.dll
0x75A70000 - 0x75B15000      C:\WINDOWS\system32\USERENV.dll
0x71950000 - 0x71A34000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.10.0_x-ww_f7fb5805\comctl32.dll
0x5B430000 - 0x5B440000      C:\WINDOWS\System32\tsappcmp.dll
0x0FF80000 - 0x0FF9E000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\JavaAccessBridge.dll
0x6D2C0000 - 0x6D2DB000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\jpeg.dll
0x189D0000 - 0x189E4000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.oui.core\2.3.0.2.0\1\DataFiles\Expanded\lib\win32\oraInstaller.dll
0x76C90000 - 0x76CB2000      C:\WINDOWS\system32\imagehlp.dll
0x6D510000 - 0x6D58D000      C:\WINDOWS\system32\DBGHELP.dll
0x76BF0000 - 0x76BFB000      C:\WINDOWS\System32\PSAPI.DLL
Local Time = Wed Nov 05 19:27:05 2003
Elapsed Time = 44
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1_01 mixed mode)
Please help!
Thanks,
Vincent Scorsone
Phone: 504-908-1087
Email: [email protected]

What exactly do you want to do with Designer? You need to install the Designer repository in a Oracle database before you can use Designer.
I suggest that you read the Repository Installation Guide (installed with the product or on OTN) and then go through the Designer Tutorial on OTN (http://www.oracle.com/technology/products/designer/9i_collateral.htm#tut) to understand some Designer concepts.

Error installing Oracle Designer/SCM Release 9.0.2.6 patch

Hi.
I am trying to install Oracle Designer/SCM Release 9.0.2.6 patch. I've already installed Oracle 9i Forms and Reports 9.0.2.1.0 (patch 2705870) and 9.0.2.3.0 (patch 3129219). The Oracle Installer version is 2.2.0.18.0, but when I try to install Designer/SCM Release 9.0.2.6.0, which uses Oracle Installer version is 2.3.0.0.0, I get the following error in my hs_err log file:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0xff12ed8
Function name=CallWndProcFunc
Library=C:\WINDOWS\System32\SHW95DLL.DLL
Current Java thread:
     at sun.awt.windows.WToolkit.eventLoop(Native Method)
     at sun.awt.windows.WToolkit.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00405000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\javaw.exe
0x77F50000 - 0x77FF7000      C:\WINDOWS\System32\ntdll.dll
0x77E60000 - 0x77F46000      C:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E5D000      C:\WINDOWS\system32\ADVAPI32.dll
0x78000000 - 0x78086000      C:\WINDOWS\system32\RPCRT4.dll
0x77D40000 - 0x77DCC000      C:\WINDOWS\system32\USER32.dll
0x77C70000 - 0x77CB0000      C:\WINDOWS\system32\GDI32.dll
0x77C10000 - 0x77C63000      C:\WINDOWS\system32\MSVCRT.dll
0x6D420000 - 0x6D4EE000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\hotspot\jvm.dll
0x76B40000 - 0x76B6C000      C:\WINDOWS\System32\WINMM.dll
0x6D220000 - 0x6D227000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\hpi.dll
0x6D3B0000 - 0x6D3BD000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\verify.dll
0x6D250000 - 0x6D266000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\java.dll
0x6D3C0000 - 0x6D3CD000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\zip.dll
0x6D020000 - 0x6D128000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\awt.dll
0x73000000 - 0x73023000      C:\WINDOWS\System32\WINSPOOL.DRV
0x76390000 - 0x763AC000      C:\WINDOWS\System32\IMM32.dll
0x771B0000 - 0x772D1000      C:\WINDOWS\system32\ole32.dll
0x6D1E0000 - 0x6D21B000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\fontmanager.dll
0x5ED00000 - 0x5EDC6000      C:\WINDOWS\System32\OPENGL32.dll
0x68B20000 - 0x68B3E000      C:\WINDOWS\System32\GLU32.dll
0x51000000 - 0x51047000      C:\WINDOWS\System32\DDRAW.dll
0x73BC0000 - 0x73BC6000      C:\WINDOWS\System32\DCIMAN32.dll
0x10000000 - 0x101CA000      C:\WINDOWS\System32\ialmgicd.dll
0x0FDB0000 - 0x0FDE0000      C:\WINDOWS\System32\ialmgdev.dll
0x74720000 - 0x74764000      C:\WINDOWS\System32\MSCTF.dll
0x0FF10000 - 0x0FF2F000      C:\WINDOWS\System32\SHW95DLL.DLL
0x0FFB0000 - 0x0FFF1000      C:\WINDOWS\system32\WOW32.dll
0x75F40000 - 0x75F5F000      C:\WINDOWS\system32\appHelp.dll
0x773D0000 - 0x77BC2000      C:\WINDOWS\system32\SHELL32.dll
0x63180000 - 0x631E5000      C:\WINDOWS\system32\SHLWAPI.dll
0x181D0000 - 0x18271000      C:\WINDOWS\System32\ntvdm.exe
0x763B0000 - 0x763F5000      C:\WINDOWS\system32\comdlg32.dll
0x77340000 - 0x773CB000      C:\WINDOWS\system32\COMCTL32.dll
0x77C00000 - 0x77C07000      C:\WINDOWS\system32\VERSION.dll
0x75A70000 - 0x75B15000      C:\WINDOWS\system32\USERENV.dll
0x71950000 - 0x71A34000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.10.0_x-ww_f7fb5805\comctl32.dll
0x5B430000 - 0x5B440000      C:\WINDOWS\System32\tsappcmp.dll
0x0FF80000 - 0x0FF9E000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\JavaAccessBridge.dll
0x6D2C0000 - 0x6D2DB000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\jpeg.dll
0x189D0000 - 0x189E4000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.oui.core\2.3.0.2.0\1\DataFiles\Expanded\lib\win32\oraInstaller.dll
0x76C90000 - 0x76CB2000      C:\WINDOWS\system32\imagehlp.dll
0x6D510000 - 0x6D58D000      C:\WINDOWS\system32\DBGHELP.dll
0x76BF0000 - 0x76BFB000      C:\WINDOWS\System32\PSAPI.DLL
Local Time = Wed Nov 05 19:27:05 2003
Elapsed Time = 44
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1_01 mixed mode)
Please help!
Thanks,
Vincent Scorsone
Phone: 504-908-1087
Email: [email protected]

What exactly do you want to do with Designer? You need to install the Designer repository in a Oracle database before you can use Designer.
I suggest that you read the Repository Installation Guide (installed with the product or on OTN) and then go through the Designer Tutorial on OTN (http://www.oracle.com/technology/products/designer/9i_collateral.htm#tut) to understand some Designer concepts.

Please Insert Adobe CS3 Design Premium to Continue Installation

Hey there,
I purchased the download version of CS3 Design Premium 3 years ago. I backed up the program to a DVD-R and my external hardrive. My computer crashed and I found was unable to install from my back up copies but was able to download it from adobe.com and installation from the downloaded files went smoothly.
When I reinstalled the suite on my Windows Vista Business HP Desktop, however, I decided not to install Dreamweaver. I just tried to install it now. All was going well until I was prompted to insert the CS3 Design Premium installation disc. I inserted the back up disc I made (no other files on it) and the message box won't budge.
All the CS3 components are working great on my system, I just would like to add Dreamweaver. I also would like to protect myself should the download link become unavailable in the future (right now I'm downloading the suite to my computer). Plus it'd be sweet not to have to wait 3 hours to download each time if possible.
So my question is could someone please assist me in making a backup of my software that works so I can reinstall the suite or individual programs in the future?
Thank you, thank you, thank you. And thank you again.
Liz
Update: I signed into My Adobe and downloaded CS3 to my desktop, unzipped files, and proceeded to install a few components (after deactivating CS) and the same thing happened - Please Insert Adobe CS3 Design Premium to Continue Installation. I have legal copy of this software that was nearly 2,000, and I can't seem to find any solution after searching for hours on end. I've considered buying an upgrade (the box/disc version) but I'm not sure I'd be able to upgrade if I can't get CS3 to move beyond this error message. I'm feeling frazzled If anyone could help me clear this hurdle I would be so grateful.

Hey Mylenium,
I appreciate your taking the time to write. I have the files backed up on a 500GB WD Passport. I also burned the files on cd and dvd. You hit the nail on the head with the installer getting hung up on searching for "the magic key." Thanks for the advice re more damage than good re installing separate apps. Too bad it was listed an option if it doesn't truly work. Otherwise I would have installed everything on my system the first time round. Helpful to know know for the future..
My concern about uninstalling everything is that I may run into the same issue during installation. As mentioned prior, I was able to reinstall my software after my computer crashed but only from the download link on adobe.com. Yesterrday an adobe rep told me that the link to my purchased download is only active for 3 years. I purchased my software in March 08 and the link allowed me to download just fine but his comment concerned me. Do you know if Adobe has any plans to deactivate links for prior purchases?
I plan on upgrading but believe I will need access to my original software for the upgrade to work. Or does one get a full copy of the software when upgrading to CS 5.5 with a valid license? I know that my Intuit and Microsoft Suite products work that way.
Elizabeth

Adobe Revel 2.3.2 installation issue

Dear Revel users:
We are aware of the installation issues people are experiencing with the latest iOS version release, and we are very sorry for the inconvenience it has caused.
We do rigorous testing prior to all releases, but unfortunately an unexpected interoperability issue has occurred with the way our App is getting bundled up for delivery to customers. We are working closely with Apple to resolve the issue as soon as possible, and we've re-submitted an update to see if this can help us narrow down the failure. Thank you for your patience. Meanwhile, feel free to access Revel via your web browser, Mac, windows 8, Android devices.
I will update this thread when I get new information.
Regards,
Pattie

Dear Revel users:
As you may know, many users had issues installing Revel iOS update version 2.3.2. We are pleased to inform you that the issue has been resolved. We know how frustrating it must have been to not be able to access your photos and videos, and are truly sorry for all the inconvenience.
Please go to the App Store and update your app, and thank you for your patience as we worked to resolve the issue. Please ensure that your operating system is on iOS version 7.1 or above when updating the app. We do rigorous testing prior to all releases, but unfortunately an unexpected interoperability issue occurred with the way our App was getting bundled up for delivery to customers.
If you are unable to upgrade to iOS version 7.1 or above at this time and can not load revel from the app store on your device, please download the latest version of the Adobe Revel app from iTunes to your computer and sync it to your iPhone, or iPad. If you are unfamiliar with this process, please plug your iOS device in to your computer with the USB cord that came with your device. Launch iTunes on your computer and select help > iPhone or ipad user guide. There are help topics there that will explain how to connect and sync your device.
If you have any more questions or are still experiencing problems, please go to our user forums and post to this link : https://forums.adobe.com/thread/1513106. Again, please accept our sincerest apologies and thank you for your patience.
The Adobe Revel team

WVC54GCA Installation issue

I have read a few posts re installation issues and 192.168.1.115 ip errors trying to get the camera to work. I dont find a resolution that helps me so thought I would post before I launch the camera with trash!
Im hooked up on a netgear WNR854T router on with gateway 192.168.11.1. When running setup the settings reproted back are;
Status:             Unconfigured
Camera Name: MyCamera
NW Config:       DHCP
IP:                   192.168.1.115
SN Mask          255.255.255.0
DF GW            0.0.0.0
I then proceed through set up, setting both DHCP and static on different attempts and manualy configuring wireless as it fails to find on search or after many refresh.
Encryption is - WPA-PSK [TKIP] + WPA2-PSK [AES]
I have tried many hard reboots all without success, receiving "Save configuration has failed!"
I am running W7 and camera does not appear in [Network] and so far has not apperead under [Attached Devices] on router.
HELP!!!!!!!!!!!!

WVC54GCA Camera works on the DHCP. If you hardwired the Camera to the Router, your router should automatically assign a IP to your Camera. To know the camera IP address you need to login to the camera setup page and under the DHCP Client table list you will find the Camera IP address. Using that IP address you can login to your camera and make the changes on it.
If its not listed under the DHCP Client table list, then you need to Press and Hold the reset button on your camera for 30sec.. Release the Reset button and then after 30sec plug the power to the Camera.... Now check if the Camera is listed under the DHCP Client table. If yes then you can use that IP address to login to the camera setup page and make the changes on your Camera.

Latest Designer maintenance release available on OTN

Oracle Designer and Oracle Repository 6i 4.9 and Oracle Designer and Oracle Repository 9i 9.0.2.7 are now
available for download from OTN. Customers may also download these via Metalink. See the Downloads section on the Designer page on OTN(http://otn.oracle.com/products/designer/index.html)
The Designer 6i Release 4.9 will supersede 6i 4.8 as the available download maintenance release. The 9i Designer Release 9.0.2.7 will supersede 9.0.2.6 as the available download maintenance release.
Support for Global Temporary tables has been added to this release for 6i and 9i. For more information on this see the release notes. For installation guides, bugs fixed notes and release notes please see Designer Online Documentation (http://otn.oracle.com/documentation/designer.html)
Regards
Sue Harper
Designer Product Management

Oracle 9i Designer full patch rel. 9.0.2.7 is available via download on OTN. I only have dialup which will make the download run for 25 hours. I would like to know where I can get this download on CDROM? I'm on Windows XP Prof. SP1.
Thanks,
Ken Janusz
Please reply to my e-mail address: [email protected]

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

PLM Design to Release PIP Installation Issue

Similar Messages

Maybe you are looking for