PLS HELP! How can I make editable text easier for user on iPad?
Hi,
I am having trouble allowing the risk elements text to be edited easily on ipad, can anynoe take a look at this project and ffe any solution?
https://www.dropbox.com/s/7i2xu9n0pv8qqf2/RISKRADAR%20EDGE_fin.zip
thanks@
HI there, your current implementation seems pretty legit to me. I was able to edit the text prety easily the first time, but then when I try to edit the text again, I can't seem to select the text. Not sure if your drag behavior is overriding the input text.
Similar Messages
-
How can i make the text bigger?
How can i make the text bigger?
1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you. -
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
Pls help - How can I add a typekit font to muse?
As Muse doesn't come with all typekit fonts already included in the dropdown list of webfonts, I'd like to know how I can add a typekit font to the dropdown menu so I can use it for my website. I have Adobe creative cloud membership.
I've searched the whole of the web and can't find anything about this at all - only about adding one of the existing muse typekit fonts which I already know how to do.
Why doesn't Adobe include all typekit fonts with Muse when you're already a full creative cloud subscriber?Done!
Date: Thu, 20 Dec 2012 03:13:17 -0700
From: [email protected]
To: [email protected]
Subject: Pls help - How can I add a typekit font to muse?
Re: Pls help - How can I add a typekit font to muse?
created by morgan_in_london in Help with using Adobe Muse - View the full discussion
You're very welcome - can I be cheeky and ask for a "correct answer" to be noted? :^D
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4935814#4935814
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4935814#4935814
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4935814#4935814. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
How can I make the text bigger in iCal?
How can I make the text bigger in iCal? I've looked at Preferences and View.
Sorry, did not see that you are using 10.6.7
-
How do I make multiple text bold, for example scene headings or character names?
How do I make multiple text bold, for example scene headings or character names?
You can do that by editing the template of the document.
Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
Press OK.
Hope this helps.
Cheers,
Sunny -
How can I make a "property node" for a VI?
Hello!
If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
Anyone have an example on this?
In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
/AmirYou really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
Try to take over the world! -
How can I make my movies pro for mac work?
How can I make my movies pro for mac work?
I have downloaded it i click on the icon but I cant make it workDelete the app using this free utlity > Download AppCleaner for Mac
Then re download the app using the same Apple ID it was originally purchased from. You won't be charged again.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
If you still have problems, I located the app developer's website. Contact details for help here > http://www.mymovies.dk/about.aspx -
How can I make more email postboxes for iPad2?
How can I make more email maps for the iPad2?
If you are on iOS 5 as your tagline suggests and it's an IMAP type account then you should get an Edit button at the top of the list of folders that you currently have on your email account. If it's a POP type account then you won't get the Edit button.
-
how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen
You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red. -
How can I make a bootable disk for Mountain Lion?
How can I make a bootable disk for Mountain Lion?
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion. -
Realtek network card seems to be disappeared. how can i make it visible again for the OS?
i can't access my LAN card. somehow it is disappeared. how can i make it visible again for the OS? my OS is windows 7. thanks very much for your help
right click on the button bar, then select "customize toolbar", drag any button you like into the toolbar and you're done!
Diego -
How can i make Apple id free for downloading apps
how can i make free apple ID for downloading apps?
No thats false thers an other way go to App Store ( on iphone or itunes) then choose any free app click download the App Store will ask you for your apple id the click in this dialog on create new apple id then you should select by Credit Card None, thats a trick, you don't need a credit or itunes card
PS: Sorry for my bad english -
How can I make lining number format for opentype fonts in Acrobat?
How can I make lining number format for opentype fonts in Acrobat?
I bought the Max OT font. I want the numbers on the right to look like on the left. I could do that in word, but not in adobe acrobat.
-
How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imacimac 24 " or connect via thunderbolt to another imac
annYou will only know about the hard drive when you try to access it in TDM from your other computer. If you cannot boot into TDM mode or if the drive does not appear on the new computer's Desktop then it is likely bad.
What you are thinking about as a recovery disk is the Recovery HD normally created when you install Lion or later on the computer. You boot from it as follows:
Boot Using Command+R keys:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"COMMAND" and the "R" keys together.
3. Release the keys when the Utilities Menu appears.
Maybe you are looking for
-
Not able to write data in ADS on 636 port
Hi- A real problem. I have configured my NWO4S UME to access LDAP using SSL, i have performed the following steps: 1)Generated a certificate for my LDAP with the FQDN e.g xyz.testdomain.com 2)published the certifcate on the domain controller, i
-
File Dialog (Details View and Multiple Selections for View File Type)
I would like to use the generic windows dialog box found in the toolbar under: File I/O/Advanced File Functions/File Dialog What I would like to do is have multiple selections for the file type, for example one menu selection is *.txt, another is *.r
-
hi can you give me an application that will keep keep all the applications on the mac up to date thanks
-
Scripting System Preferences/Adobe Version Cue Preferences
I'm trying to disable the Adobe Version Cue CS2 status bar menu on a number of machines at the same time. I can't figure out how to reference the check box for it though. tell application "System Preferences" activate set current pane to pane "com.ad
-
Methods to atomaticly parse througt an packet/object and print out seqnr?
do anybody know if there is any method (mabe using parse etc.) that reads out the sequensenumber and timestamp from the packetheaders?