Plug-in load issue

I had created a new plugin by copying the code of an existing plugin.
Now when I launch Acrobat Pro only one of the plug-ins gets loaded (on Windows Platform). My guess is that it could be happening if there is some ID associated with the plug-in is same for both the plugins. But I couldn't find out this information.
Is there any ID associated with a plug-in which identifies it uniquely? How can I debug as to why plug-in is not getting loaded?
-amit

Few more details:
I am using Acrobat SDK for writing the plugins. Both the plugins are placed in the plug_ins directory and the one which comes before in alphabetical order is the one gets loaded.
I am not getting any error for the second plug-in load failure. But the menu item that I have added for the second plug-in is not displayed which tells me that this plug-in is not loaded.
-amit

Similar Messages

Powered plug-ins loader will not allow opening of FCP 6

Have the most current Mav OS installed on MBP Retina late 2013. When I try to open FCP 6 it comes up with this message:
Powered plug-ins loader reported error 2. Please re-install
Current plugin: UAD Modifilter
Well I unistalled it using UAD 5.4.1 driver which was the version that was installed. Since the MBP doesn't have a PCI slot I did this. Any other suggestions?

How did you install FCP 6 on to this computer? Because the latest OS doesn't let you do it without a lot of trickery. And the latest OS doesn't really support this really old FCP version...so that is an issue.

SAP Mobile Sales 2.0 delta load issue for Sales Orders

Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad.

Report loading Issue

Hello all,
I am using Oracle 6i for report and oracle10g for the database.I have created a matrix report in oracle Report but which report taking so much time to show the output it almost taking more than 10 minutes,at the same time that query executed within 1 minute in toad which used in matrix report.
kindly guide me how to solve the loading issue.

I did not used any formula column in my report,all the values are taking from query.
But I used different types of format trigger in my report for the coloring purpose.Does it make any problem?

Plug-in load class error while running portalapp.xml file in NWDS7.0

hi,
im facing a problem in NWDS7.0 while running portalapp.xml file im getting error realted some plug-in load class error.
Even 3 times i have re-installed but still getting same error.
Please help me how to over come this. This is error im getting :
Please open this link with Firefox so that you can able to see error.
http://www.imageurlhost.com/images/jri5lj7lpftu23ejyye0_Error.jpg
Regards,
prasad.

Dear Prasad
Please right click on portalapp.xml > open with > check all the available editors.
Also restore default edition in NWDS. Go to windows > preference > Workbench OR Web editors > click on restore default and Apply and then Ok.
then close the NWDS and open it.
Hope it will helps
Best Regards
Arun Jaiswal

Data Load Issue "Request is in obsolete version of DataSource"

Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
Samit

Hi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu.

Index.php loading issue

I finished and uploaded a new site in .php.
I have a graphics loading issue only with IE.
The js accordion with images will not reload after returning to the home page.
Anyone out thier that can shed some light on this?
http://carpetcleaningsantabarbarapro.com/index.php
Thank you in advance
Crissymarie

Ken might be on to something. The current release of jQuery is 1.7.2 which is compatible with jQuery Cycle.
For the latest core library, you can link to jQuery's CDN like so:
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js"></script>
You have some improperly nested <h3> tags around your lists on lines 170 and 191. To keep your code error free, simply delete the heading tags.
Finally, as a courtesy to your site visitors, consider adding a cookie so people don't have to watch the Flash Spokesperson every time they go to your home page. The link below shows how:
http://alt-web.com/DEMOS/cookie-test-show-hide-flash-intro.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

TileList data load issue

I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?

Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.

BI Load issue in the transformation/DTP after SP 17

Hello,
After SP 17 applied in our BI system, we are having load issue in one particular transformation/DTP.
See below the errors:
u2022 Messages for 101 data records saved; request is red acc. to
configuration
u2022 Thee is no active nametab in the system, although an active ABAP/4
Dictionary object was expected. Reactivate the ABAP/4 Dictionary object.
Also I have activated the DSO, transformation and DTP. Also I went to SE14 and try to adjust my DSO, SE11 and activate the table but still having the issue.
Can someone advise me on how to resolve this issue?
Thanks a lot.
Cesar

Hi,
Do the following: In BI, run transaction SE38 >> RSDG_CUBE_ACTIVATE to recreate the Metadata information
for the Info-provider.
Then execute another program via SE38: RSDD_RSTMPLWIDTP_GEN_ALL
See Note 1161940 and 1152453 for more details.
Regards,

BW sales load issue

I have a problem with this. The jobs in the screen snapshot below are running too long - 2LIS_11_VAITM, 2LIS_11_V_ITM, and 2LIS_13_VDITM. They use to run for just a couple of minutes. The job configuration is; when the first job finishes a delay of 10 minutes will be incurred then the second job will run, then another 10 minute delay before the third job runs. After these 3 jobs are complete an activation job needs to run. This activation job began to fail because the first 3 jobs were not finished. For now, the activation job has been moved but we need to understand why these are running longer and fix it. We may be experiencing a problem with database performance in PDF but I would not think it would take that much longer.
This is the BW sales load issue
The info-package group is schedule @ 00:05 am and it contains 3 info-packages: VAITM, V_ITM and VDITM with 10 minutes execution gap.
The first VAITM started 00:05:46 and ended it up in BW at 00:09:02.
Then we have 10 minutes delayed between jobs.
V_ITM started 00:20:12 and for some reason it finished at 01:00:51. We can see communication between PDF and BWP took much longer than normal.
Then we have 10 minutes delayed between jobs
At 01:00:25 the activation job started and failed. It requires the info-packages to be in GREEN status but V_ITM finished @ 01:00:51.
It probably failed because V_ITM still had YELLOW status at the moment.
VDITM started 01:12:02 and finally finished it load at 02:09:16. A big communication delayed between system.
See below an example of the load on the 01/14/2007. It looks normal communication between systems
Could you please give solution for this.
Thanks
Vasu.

Hi,
For every job you define and at the same time, you can also define the priority
levels to each job, since, during your job execution might be your job queue is
full with some other background processings, so try setting up the priority levels
of the job.
cheers,
Pattan.

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

Demantra Data Load Issue

I am new to Demantra. Have installed a stand alone Demantra system in our server. In order to load data, I created a new model, defined item and location levels, then clicked on 'Build Model'. The data is loaded into 3 custom tables created by me. After creating the model, I cannot login to 'Collaborator Workbench', it gives message 'There are system errors. Please contact your System Administrator'. Can anyone please tell me what I am doing wrong and how to resolve the issue.
Thanks

Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.

Integrated WL/Jdeveloper class loading issue

Hello,
I am trying to run a deployed project , getting into this class loading issue. Any idea?
javax.security.auth.login.LoginException: java.lang.LinkageError: loader constraint violation: when resolving interface method "com.scat.util.identity.UserFactory.lookup(Ljava/lang/String;)Lcom/scat/domain/identity/User;" the class loader (instance of weblogic/utils/classloaders/ChangeAwareClassLoader) of the current class, com/scat/auth/authentication/login/UserLoginModule, and the class loader (instance of sun/misc/Launcher$AppClassLoader) for resolved class, com/scatl/util/identity/UserFactory, have different Class objects for the type com/scat/domain/identity/User used in the signature
Thanks
Ram

How many times are you loading the com/scat/domain/identity/User type?
Is this in the system classloader and the application? and are you using class loading filtering in the application, for example,
in weblogic.xml - prefer-web-inf-classes?

Adobe Acrobat 8 Plug-in GUI issues in Mac OS 10.4.11 using XCode 2.5

I am trying to port my plug-in to Acrobat 8. I have been maintaining this plug-in from Acrobat 5 on both PC and Mac. I am now having some trouble with the UI components of the Plug-in on the Mac. I can load and debug my plug-in on Acrobat 8, however my toolbar does not show up. Also, the modal dialog box that needs to launch does not. I am having trouble locating an example, or some documentation.
For the Toolbar button, I am using the following code from the Stamper example.
void *GetStamperToolButtonIcon(void)
#ifdef MAC_PLATFORM
extern CFBundleRef gPluginBundle;
AVIconDataRec iconData;
// Find a resource in the plugin bundle by name and type.
CFURLRef pingURL = CFBundleCopyResourceURL( gPluginBundle,
CFSTR("StamperIcon"),
CFSTR("png"),
NULL );
ASFile asf = NULL;
ASPathName aspn = ASFileSysCreatePathName (NULL,ASAtomFromString("CFURLRef"),
pingURL, NULL);
ASFileSysOpenFile(NULL, aspn, ASFILE_READ, &asf);
ASUns32 dataSize = ASFileGetEOF(asf);
ASUns8 *data = (ASUns8 *)ASmalloc(dataSize + 1);
ASFileRead(asf, (char *)data, dataSize);
ASFileClose(asf);
iconData.dataStm = ASMemStmRdOpen((char *)data, dataSize);
iconData.eColorFormat = kAVIconColor;
return AVAppCreateIconBundle6(kAVIconPNG, &iconData, 1);
#elif WIN_PLATFORM
return(AVCursor)LoadBitmap(gHINSTANCE, MAKEINTRESOURCE(IDB_BITMAP1));
#endif
This works for the stamper, and correctly displays the Stamper Icon in the toolbar, but when I try to create a new PNG file with the same name, the button no longer works. Also, if I try to change the name of the PNG file to "MyTool.png" and then the reference from CFSTR("StamperIcon") to CFSTR("MyTool") the button no longer works. Does anyone have any insight? In my research, I have come across SafeGetResource, and using the resource chain, however, I can not get this to work either.
The Modal Dialog I am trying to display is in a RSRC file, and it does not launch when I call sADMDialog->Modal() like it does in Acrobat 7, 6, and 5. Are there any Mac examples of plug-ins that use ADM, or platform specific Modal Dialog Boxes?
I have read the SDK documentation, but I can not find any code samples.
Any help would be greatly appreciated,
Thank You,
Austin

As of now I am unable to link up the objective c cocoa code when I build the plug-in. I can compile but not link. The error I get is below. Note that is that there is a -framework Carbon flag, but no -framework Cocoa flag. I have modified the Stamper example plug-in provided with the SDK and I can not find how to tweak the project settings to use the cocoa framework. If I can not figure out this linking problem, I will create a small project demonstrating the issues I am having and I will post it.
Ld "/Applications/Adobe/Acrobat 8 SDK/Version2/PluginSupport/Samples/MacShoomTool8/mac/BuildResults/obj/MacShoomTool8/MacSh oomTool8_debug/MacShoomTool8.build/Default/MacShoomTool8_debug.build/Objects-normal/i386/M acShoomTool8" normal i386
cd "/Applications/Adobe/Acrobat 8 SDK/Version2/PluginSupport/Samples/MacShoomTool8/mac"
/Developer/usr/bin/g++-4.0 -o /Applications/Adobe/Acrobat\ 8\ SDK/Version2/PluginSupport/Samples/MacShoomTool8/mac/BuildResults/obj/MacShoomTool8/MacSh oomTool8_debug/MacShoomTool8.build/Default/MacShoomTool8_debug.build/Objects-normal/i386/M acShoomTool8 -L/Applications/Adobe/Acrobat\ 8\ SDK/Version2/PluginSupport/Samples/MacShoomTool8/mac/BuildResults/obj/MacShoomTool8/MacSh oomTool8_debug/Default -F/Applications/Adobe/Acrobat\ 8\ SDK/Version2/PluginSupport/Samples/MacShoomTool8/mac/BuildResults/obj/MacShoomTool8/MacSh oomTool8_debug/Default -F/Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks/Cocoa.framework -F/Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks/Cocoa.framework/Headers -F. -F/Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks/Cocoa.framework/Versions/A -F/Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks/Cocoa.framework/Versions/Curr ent -F/Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks/Cocoa.framework/Versions/A/He aders -F/Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks/Cocoa.framework/Versions/Curr ent/Headers -F/Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks -filelist /Applications/Adobe/Acrobat\ 8\ SDK/Version2/PluginSupport/Samples/MacShoomTool8/mac/BuildResults/obj/MacShoomTool8/MacSh oomTool8_debug/MacShoomTool8.build/Default/MacShoomTool8_debug.build/Objects-normal/i386/M acShoomTool8.LinkFileList -framework Carbon -framework ApplicationServices -arch i386 -exported_symbols_list Symbols.exp -Wl,-Y,1455 -bundle -mmacosx-version-min=10.3 -Wl,-dead_strip -isysroot /Developer/SDKs/MacOSX10.4u.sdk
/Developer/usr/bin/../libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols:
_objc_msgSend
.objc_class_name_NSObject
/Applications/Adobe/Acrobat 8 SDK/Version2/PluginSupport/Samples/MacShoomTool8/mac/BuildResults/obj/MacShoomTool8/MacSh oomTool8_debug/MacShoomTool8.build/Default/MacShoomTool8_debug.build/Objects-normal/i386/S hoomToolUI.o reference to undefined _objc_msgSend
/Applications/Adobe/Acrobat 8 SDK/Version2/PluginSupport/Samples/MacShoomTool8/mac/BuildResults/obj/MacShoomTool8/MacSh oomTool8_debug/MacShoomTool8.build/Default/MacShoomTool8_debug.build/Objects-normal/i386/S hoomToolController.o reference to undefined .objc_class_name_NSObject
collect2: ld returned 1 exit status

AD External Authentication Plug-In verification issue

We are working on a Proof of Concept instance to integrate MS AD with OID for the first time for E-Biz 11i.
1) I completed the bulk load of all the existing users from AD to OID successfully
2) completed enabling the syncrhonization profile
3) Ran the txkrun.pl successfully
4) However i wanted to check the External authentication plug-in and i get the below issue.
How to debug ldapcompare ? Where is the logfile for ldapcompare ?
ldapcompare -h OID_Host -p 389 -D "cn=orcladmin" -w ******* -b "cn=lastname\, firstname,ou=consultants,ou=users,ou=usaeast,dc=adadmin,dc=lps,dc=netsrv,dc=us" -a userPassword -v abcdefgh
The value abcedefgh is not contained in the attribute userPassword in DN cn=lastname\, firstname,ou=consultants,ou=users,ou=usaeast,dc=adadmin,dc=lps,dc=netsrv,dc=us.
An ldapbind on the same AD server is successful, but ldapcompare is failing.

I get invalid credentials. Though the network password is correct. I feel its somewhere i messed up the 3rd party plug-in configuration. Is there a method to get debug information for ldapcompare command ?
From metalink NOTE : 277382.1
"When using the above command, ldapcompare binds to OID using the OID admin user (typically "cn=orclAdmin") and password. Then it provides the AD username and requests that the value supplied as AD-USER-PASSWORD be compared to whatever is stored in AD username's userPassword attribute. Because OID does not store a value in its own user entries/userPassword attributes for AD-synchronized entries, this ldapcompare call will cause OID to invoke the plug-in and verify the userPassword value in AD instead.
If the plug-in works, the ldapcompare should return a message saying that the given password is contained in the userpassword attribute, e.g.
"

Plug-in load issue

Similar Messages

Maybe you are looking for