Plz help !!!Error ORA-04023: Object could not be validated or authorized

Hi Folks,
Came across this error in AWR reports production oracle 11gR2 database. Did anybody come across this error before or has any idea on this. Pls respond
ORA-04023: Object SELECT SUM(VALUE), COUNT(INSTANCE_NUMBER), SUM(INSTANCE_NUMBER) FROM DBA_HIST_SYS_TIME_MODEL WHERE DBID = :B4 AND SNAP_ID = :B3 AND INSTANCE_NUMBER MEMBER OF :B2 AND STAT_NAME = :B1 could not be validated or authorized
thanks

928912 wrote:
Hi Folks,
Came across this error in AWR reports production oracle 11gR2 database. Did anybody come across this error before or has any idea on this. Pls respond
ORA-04023: Object SELECT SUM(VALUE), COUNT(INSTANCE_NUMBER), SUM(INSTANCE_NUMBER) FROM DBA_HIST_SYS_TIME_MODEL WHERE DBID = :B4 AND SNAP_ID = :B3 AND INSTANCE_NUMBER MEMBER OF :B2 AND STAT_NAME = :B1 could not be validated or authorized
thankswhat did you do to break this?
bcm@bcm-laptop:~$ oerr ora 4023
04023, 00000, "Object %s%s%s%s%s could not be validated or authorized"
// *Cause: A number of attempts were made to validate or authorize an
// object but failed.
// *Action: Please report this error to Oracle Support Services.

Similar Messages

Discoverer Plus Error: ORA-12154:TNS:could not resolve the

Hi,
I’m running the Discoverer report in Discoverer Plus and getting the below error, but when the same report ran in Desktop completes successfully and the SQL from the report is running without error in SQL nav.
Database Error - ORA-12154:TNS:could not resolve the connect identifier specified.
Thanks in Advance.
Sunil

Hi Sunil,
Did you test the direct method I posted above? That will bypass the tnsnames.ora file. If it connects fine that way, then you likely have a configuration issue with your sqlnet.ora and/or tnsnames.ora
You can test with:
$ORACLE_HOME/bin/tnsping <tnsalias>
If it is successful, then check if you have the TNS_ADMIN environment variable set (echo $TNS_ADMIN) -- assuming Linix/Unix, if Windows, check system environment variables
You may TNS_ADMIN set and pointing to a tnsnames.ora that is not in the default location.
If it fails and your tns entry is correct in the tnsnames.ora file, then you may need to look at the sqlnet.ora
For example,
If you have NAMES.DEFAULT_DOMAIN set.. then you would need enter: <tnsalias>.<domain> (i.e. scott.world)
or you may need to check if TNSNAMES is first in NAMES.DIRECTORY_PATH=
You can remove or rename the sqlnet.ora to make sure that is not an issue.
Hope that helps. Good Luck.
~Steve.

Since one week my iphone, after synchronisation, gives me error message 13 objects could not get synchronized, look in itunes for more information. however, I dont find any info there

since one week my iphone, after synchronisation, gives me error message "13 objects could not get synchronized, look in itunes for more information." however, I dont find any info there, neither on the mac I synch with nor on the iphone

Launch Disk Utility in /Utilities. Then, click on the volumes under the top-level disk. The one that has this listed on the bottom is the boot volume.

Error ORA-12154 TNS: Could not resolve the connect identifier specified

Hi. I'm getting the above error message as I'm trying to create a connection to my oracle 10g database from visual studio 2008. (it's not an ASP.NET app, but a windows forms)
I've installed the Oracle Developer Tools for Visual Studio and am following the instructions found in the "2 Day + .NET Developer’s Guide" for connecting to the database via the "Add Data Source" menu option.
When I get to the form where I'm supposed to supply the data source name, and sign in credentials, it's failing with the above error.
I know I'm using the right credentials but I can sign into SQL Developer using the same ID and password.
Does this have anything to do with my SQLNET.ORA file? I read in another forum that you have to use SQLNET to connect to 10g databases...
is this correct?
any help would be appreciated.
Edited by: user10902634 on Jul 2, 2009 11:32 AM
I've also followed the instructions at http://download-west.oracle.com/docs/cd/A91202_01/901_doc/network.901/a90154/gettings.htm#483215. I just modified the existing service name, and tested it using the same credentials i'm using in vstudio and it worked with no problems.

I found a resolution. I followed the "Oracle developer tools for visual studio FAQ". After my administrator installed the developer tools for me, i had to copy the original tns file over to the new ora home directory.
that fixed the problem.
I'm still having problems though getting my application to run on my client machines.
as a test, i started a new vstudio 2008 project. (.net 2.0) I created a new data source, connected to my oracle database using odp, and then created a data grid control that has all my data from the database.
i compile with no problems. when i copy the files to my client machine and try to run it, i get the following error:
Oracle.DataAccess.Client.OracleException The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize()
at Oracle.DataAccess.Client.OracleDataAdapter..ctor()
at dbtest.DataSet1TableAdapters.WITTableAdapter.InitAdapter() in C:\Documents and Settings\jj\Local Settings\Application Data\Temporary Projects\dbtest\DataSet1.Designer.vb:line 9684
at dbtest.DataSet1TableAdapters.WITTableAdapter.get_Adapter() in C:\Documents and Settings\jj\Local Settings\Application Data\Temporary Projects\dbtest\DataSet1.Designer.vb:line 9600
at dbtest.DataSet1TableAdapters.WITTableAdapter.Fill(WITBASELINEDataTable dataTable) in C:\Documents and Settings\jj\Local Settings\Application Data\Temporary Projects\dbtest\DataSet1.Designer.vb:line 23873
at dbtest.Form1.Form1_Load(Object sender, EventArgs e) in C:\Documents and Settings\jj\Local Settings\Application Data\Temporary Projects\dbtest\Form1.vb:line 12
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
dbtest
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Development/WIT%20Oracle%20EXE/dbconnectionTest/dbtest/bin/Release/dbtest.exe
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
Oracle.DataAccess
Assembly Version: 2.111.6.20
Win32 Version: 2.111.6.20
CodeBase: file:///C:/Development/WITBaseline%20Oracle%20EXE/dbconnectionTest/dbtest/bin/Release/Oracle.DataAccess.DLL
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
I've installed the oracle 10g client on my client machine.
Please and thanks.

ORA-29534 object could not be resolved (loadjava db2jcc.jar)

Hi,
getting frustraded ... :(
I cannot load the IBM JDBC driver for DB2 using loadjava (Oracle 10g on Solaris).
Is it because my version (downloaded from IBM webpage) needs jre1.5??? Any ideal with jdbc is working for DB2?
Cheers Aron
Message was edited by:
user583720

Hi,
Many things can lead to ORA-29534 such as class compiled with an incompatible JDk/JRE version. For 10g, make sure the db2jcc.jar has been compiled with JDK 1.4.
Kuassi http://db360.blogspot.com

Error - "java.lang.Object" is not a valid base class for this operation

Hi -
Got above error when trying to create a simple java class. "No Template" is selected when create new app.
How can this happened ?
thanks

What is the JDeveloper version?
If JDeveloper version is 10.1.2, install in a directory without empty spaces in directory name.

Installing OEHR application: ORA-04023: Object APEX_030200.WWV_FLOW_INSTAL

I am installing the OEHR Sample Objects application.
I am getting the following error message after specifying “Supporting Objects”.
I select “YES” and click Next
Here is the error message:
ORA-04023: Object APEX_030200.WWV_FLOW_INSTALL_WIZARD could not be validated or authorized
Can you help?
Thanks!

I was able to fix it.
I ran
EXEC DBMS_UTILITY.compile_schema(schema => 'APEX_030200');
This recompiled all object in the schema
Thanks!

ORA-12154: TNS:could not resolve... - sql plus works, env vars are set...

Hi,
I am getting this error message in my ASP.Net apps (namespace Oracle.DataAccess.Client) and any app that tries to use the Oracle Provider for OLE DB.
Error:
ORA-12154: TNS:could not resolve the connect identifier specified
Here is what I do know:
- My ORACLE_HOME is set to C:\oracle\product\11.1.0\client_1\
- My path has C:\oracle\product\11.1.0\client_1\network\admin;C:\oracle\product\11.1.0\client_1\bin;
- I installed Oracle Client 11g, previously 10g was working but one of the devs wanted to upgrade
- I can connect using sqlplus user/pass@tnsname
- I can test tns entries successfully in Net Manager
Here is what I don't know:
- When using OLE connections, why does Oracle Provider for OLE DB not pick up on the environment variables - sql plus seems to, that's why it works.
- In ASP.Net, why does the connection object from Oracle.DataAccess.Client not pick up the correct environment variables?
- How do the Oracle drivers pick up the location of the TNS names?
Thanks,
Michael
Edited by: user2750352 on 04-May-2009 07:51

Hi,
What "environment variables" are you referring to that you have set? You shouldnt have to set any, unless you're talking about TNS_ADMIN just to avoid having to configure multiple TNSNames.ora's if you have multiple homes.
Your PATH doesnt need to include OH\network\admin, but thats not hurting anything. PATH is for dll loading, not for finding config files.
Do you still have 10g installed? When you connect using sqlplus user/pass@tnsname, are you using 11g sqlplus? Or is that coming from the 10g client? Multiple homes arent aware of each other, so if you have a 10g home and an 11g home, you'd have to configure tnsnames.ora for both (or use tns_admin).
As far as I know, the client software picks up tnsnames.ora by checking:
1) the local working directory
2) the tns_admin directory
3) the network\admin directory of the client home being used.
Hope it helps,
Greg

ORA-12154: TNS:could not resolve service name

Hi Guru's
i applied Maintainacepack 3480000 patch on my application for upgrading 11.5.7 to11.5.10.2, after completion of patch, I run the autoconfig it has given bellow error, please anybody can help me, i need to finish my task immediately, please provide me the solution.
autoConfig Profile Phase
Running Profile Process 1 of 1 for CLN_TOP
Executing script in InstantiateFile:
/sgmtemp/prodcomn/admin/install/MSBEP004_dcpsr006osm/clnadmprf.sh
script returned:
clnadmprf.sh started at Sun Feb 17 06:24:13 WST 2008
The environment settings are as follows ...
ORACLE_HOME : /sgmtemp/prodora/8.0.6
ORACLE_SID :
TWO_TASK : msbep004
PATH : /sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/8.0.6/bin:/sgmtemp/prodappl/fnd/11.5.0/bin:/sgmtemp/prodappl/ad/11.5.0/bin:/sgmtemp/prodcomn/util/jre/1.1.8/bin:/sgmtemp/prodcomn/util/unzip/unzip::/sgmtemp/prodora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/8.0.6/bin:/sgmtemp/prodcomn/util/jre/1.1.8/bin:/sgmtemp/prodcomn/util/unzip/unzip:/sgmtemp/prodora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/java14/jre/bin:/usr/java14/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/sgmtemp/prodappl/bin:/usr/bin/X11:/sbin:/usr/lpp/pd/bin:.
LD_LIBRARY_PATH : /sgmtemp/prodora/8.0.6/network/jre11/lib/aix/native_threads:/sgmtemp/prodappl/cz/11.5.0/bin:/sgmtemp/prodora/8.0.6/lib:/usr/dt/lib:/usr/openwin/lib
Executable : /sgmtemp/prodora/8.0.6/bin/sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Feb 17 06:24:13 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve service name
clnadmprf.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
thanks

Please Apply "Patch 5985992 - TXK AUTOCONFIG ROLLUP PATCH Q (JUL/AUG 2007)", run AutoConfig, and check then.

Ora 12154: TNS could not resolve connect identifier specified

Hi,
I have Oracle 11g (Release 1_32bit) Client on my C:\ drive which connect to a Remote 11g (11.1.0.7.0 - 64bit) server.
I have installed 10g DB Server(10.2.0.1.0) and Oracle 10g Forms(Forms [32 Bit] Version 10.1.2.0.2 ) on my D:\ drive.
When I try to connect to Oracle 10g DB from Forms using "Connect" button, I get following error:
"ORA-12154: TNS: could not resolve the connect identifier specified"
Tns and Listner files both are same in Developer_Suite home and 10g home.
Can someone please help me with this error?
Thanks

"ORA-12154: TNS: could not resolve the connect identifier specified"
$ oerr ora 12154
12154, 00000, "TNS:could not resolve the connect identifier specified"
// *Cause: A connection to a database or other service was requested using
// a connect identifier, and the connect identifier specified could not
// be resolved into a connect descriptor using one of the naming methods
// configured. For example, if the type of connect identifier used was a
// net service name then the net service name could not be found in a
// naming method repository, or the repository could not be
// located or reached.
// *Action:
//   - If you are using local naming (TNSNAMES.ORA file):
//      - Make sure that "TNSNAMES" is listed as one of the values of the
//        NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA)
//      - Verify that a TNSNAMES.ORA file exists and is in the proper
//        directory and is accessible.
//      - Check that the net service name used as the connect identifier
//        exists in the TNSNAMES.ORA file.
//      - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
//        file. Look for unmatched parentheses or stray characters. Errors
//        in a TNSNAMES.ORA file may make it unusable.
//   - If you are using directory naming:
//      - Verify that "LDAP" is listed as one of the values of the
//        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA).
//      - Verify that the LDAP directory server is up and that it is
//        accessible.
//      - Verify that the net service name or database name used as the
//        connect identifier is configured in the directory.
//      - Verify that the default context being used is correct by
//        specifying a fully qualified net service name or a full LDAP DN
//        as the connect identifier
//   - If you are using easy connect naming:
//      - Verify that "EZCONNECT" is listed as one of the values of the
//        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA).
//      - Make sure the host, port and service name specified
//        are correct.
//      - Try enclosing the connect identifier in quote marks.
//   See the Oracle Net Services Administrators Guide or the Oracle
//   operating system specific guide for more information on naming.
$
Tns and Listner files both are same in Developer_Suite home and 10g home.Listener files are totally useless in Developer Suite home, since they are server files.

Toad ORA-12154: TNS:could not resolve the connect identifier specified

I'm installing oracle clients and tools on a new Windows 7 machine issued to me by my company.
I installed a 64 bit 10.2.0.3 oracle client, but found that 64 bit installations don't work with TOAD. So I installed a 32 bit 10.2.0.1 oracle client. I also set up my TNS names files in the network/admin directory of both installations, set up the hosts files, and ensured that the registry information is accurate. I have no ORACLE_HOME environment variable because when I installed the 2nd installation of Oracle it said that I shouldn't have one since I have multiple versions of oracle and it erased it.
I am able to connect and use SQL Plus and SQL Developer with both installations of Oracle, but I'm not able to connect with TOAD. TOAD finds the 32 bit installation and all of its registry information looks correct and TOAD says "The Oracle home is valid". TOAD also loads my TNS file and all associated IPs and everything looks good when I look at them in the the TNS Editor. I am also running TOAD as administrator in order to avoid "Can't initialize OCI. Error -1" errors.
Yet, whenever I try to connect to any database, I get the following error:
"ORA-12154: TNS:could not resolve the connect identifier specified" and then the database I am using
Is there anything else I need to setup because I have multiple installations of Oracle? Or anything else I need to setup running on a 64 bit windows machine with 32 bit installations of oracle and toad?
Thanks for any help you can give.

And in case you want to know my registry information:
64 bit installation:
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OraClient10g_home2
Class Name: Application Global Data
Last Write Time: 10/5/2010 - 11:36 AM
Value 0
Name: ORACLE_HOME
Type: REG_SZ
Data: C:\oracle\product\10.2.0\client_2
Value 1
Name: ORACLE_HOME_NAME
Type: REG_SZ
Data: OraClient10g_home2
Value 2
Name: ORACLE_GROUP_NAME
Type: REG_SZ
Data: Oracle - OraClient10g_home2
Value 3
Name: ORACLE_BUNDLE_NAME
Type: REG_SZ
Data: Enterprise
Value 4
Name: NLS_LANG
Type: REG_SZ
Data:
Value 5
Name: OLEDB
Type: REG_SZ
Data: C:\oracle\product\10.2.0\client_2\oledb\mesg
Value 6
Name: StmtCacheSize
Type: REG_SZ
Data: 0
Value 7
Name: SQLPATH
Type: REG_SZ
Data: C:\oracle\product\10.2.0\client_2\dbs
Value 8
Name: ORACLE_HOME_KEY
Type: REG_SZ
Data: SOFTWARE\ORACLE\KEY_OraClient10g_home2
32 bit installation:
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ORACLE\KEY_OraClient10g_home1
Class Name: Application Global Data
Last Write Time: 10/6/2010 - 12:42 PM
Value 0
Name: ORACLE_HOME
Type: REG_SZ
Data: C:\oracle\product\10.2.0\client_3
Value 1
Name: ORACLE_HOME_NAME
Type: REG_SZ
Data: OraClient10g_home1
Value 2
Name: ORACLE_GROUP_NAME
Type: REG_SZ
Data: Oracle - OraClient10g_home1
Value 3
Name: ORACLE_BUNDLE_NAME
Type: REG_SZ
Data: Enterprise
Value 4
Name: NLS_LANG
Type: REG_SZ
Data: AMERICAN_AMERICA.WE8MSWIN1252
Value 5
Name: SQLPATH
Type: REG_SZ
Data: C:\oracle\product\10.2.0\client_3\dbs
Value 6
Name: ORACLE_HOME_KEY
Type: REG_SZ
Data: SOFTWARE\ORACLE\KEY_OraClient10g_home1
And my environment variables:
TNS_ADMIN: C:\Oracle\product\10.2.0\client_3\NETWORK\ADMIN
PATH: "C:\oracle\product\10.2.0\client_3\bin;C:\oracle\p roduct\10.2.0\client_2\bin;%SystemRoot%\system32;% SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT %\System32\WindowsPowerShell\v1.0\;C:\Program Files\TortoiseSVN\bin"
The string "C:\oracle\product\10.2.0\client_3\bin" is the bin directory for my 32 bit installation.
The string "C:\oracle\product\10.2.0\client_2\bin" is the bin directory for my 64 bit installation.

ORA-12535 TNS:Operation time Out and ORA-12154:TNS Could not resolve servic

Greetings!!!
I have installed my Oracle Database 10g & Developer Suite 10g in Windows XP Pro Machine. Oracle Application Server 10g is also installed in Windows 2003 Server machine.Both machine have different domain.When using Form Developer Suite OC4J to run my form program, i can connect to the database properly run the form perfectly.
Problem encountered.
When I tried to run the form using Application Server 10g(installed in Windows 2003 Server), I got an error ORA-12154:TNS Could not resolve service name when connecting to the database and I got an error ORA-12535 TNS:Operation time Out when using TNSPing. I checked both the configuration of TNSNAMES.ORA(database & Application SErver) using the same port & service name but still got the same error.
Hope somebody can help me out there...
Many thanks in advance.
Regards,
BTF

I have seen this before with my setup, I found that I had to go into the net configuration assistant, and change my host name to the fully qualified name, example: my compuer name is computer1, I had to enter in computer1.OIT.Docfinity.com for it to take. That has always gotten me past that TNS error, just my 2 cents, hope it helps.
keep on keeping on.

Ora-12154:TNS:Could not resolve the connect identifier specified

Helo
I face this error when i tried to connect to the database.
i have been installed 11g database on machine with database name 'hrall'
But when i tried to connect to the database it's shows me error "ora-12154:TNS:Could not resolve the connect identifier specified"
when i put the old database entry an that machine and try ti connect it's connect Successfully.
Kindly Suggest
Regards,
Sachin

Hi Error not solved yet
i am giving you my system details as follow -
OS Name : Microsoft(R) Windows(R) Server 2003 Standard x64 Edition
System Type: x64-based PC
My tnsentry also right
posted as follow -
HRALL.voltasworld.com =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ps-win-hrall.voltasworld.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = hrall)
listener.ora file
# listener.ora Network Configuration File: F:\app\dbadmin\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = F:\app\dbadmin\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:F:\app\dbadmin\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = ps-win-hrall.voltasworld.com)(PORT = 1521))
ADR_BASE_LISTENER = F:\app\dbadmin
Kindly Suggest
Regards
Sachin

ORA-12154: TNS:could not resolve the connect identifier specified Oracle 11

I'm having a slight issue with Oracle 11 R2
Oracle 10g was removed from the machine - The registry was cleared and I couldn't see anything of 10g left.
I then installed Oracle 11 with just the software only, and then created a listener.
Using the Database Configuration Assistant, I tried to add a database but I get the error:
'ORA-12154: TNS:could not resolve the connect identifier specified'
The TNS_ADMIN is set to: \\ravel\tnsnames and I can connect to other instances around the company.
My tnsnames entry is:
GMAN_1120.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = gman)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ora112)
If i start the listener i get:
TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
System parameter file is D:\oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
Log messages written to d:\oracle\diag\tnslsnr\gman\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=gman)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date 03-AUG-2011 10:34:28
Uptime 0 days 0 hr. 0 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File d:\oracle\diag\tnslsnr\gman\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=gman)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "ora112" has 1 instance(s).
Instance "ora112", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
Can anyone spot what may have gone wrong? I've setup 10g multiple times and never had a problem

I can tnsping my machine using another machine:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = gman)(PORT = 1521))) (CONNECT_DATA = (SERVIC
E_NAME = ora112)))
OK (30 msec)
My listener.ora file is:
# listener.ora Network Configuration File: D:\oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(SID_DESC=
(GLOBAL_DBNAME=ora112)
(ORACLE_HOME=D:\oracle\product\11.2.0\dbhome_1)
(SID_NAME=ora112)
)

Unable to resolve ORA-12154: TNS:could not resolve the connect identifier specified

Hi Friends,
I am unable to resolve ORA-12154: TNS:could not resolve the connect identifier specified, error:
C:\Windows\system32>sqlplus scott/tiger@ORADATA
SQL*Plus: Release 11.2.0.1.0 Production on Sun Feb 2 13:46:10 2014
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
SQL> select database_name from v$database;
DATABASE_NAME
ORADATA
SQL> select instance_name from v$instance;
INSTANCE_NAME
oradata
tnsnames.ora
============
ORADATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL=TCP)(HOST=himanshu-PC)(PORT=1521))
    (CONNECT_DATA =
(SERVICE_NAME = oradata)
(SERVER = DEDICATED)
listener.ora
=========
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = himanshu-PC)(PORT = 1521))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = ORADATA)
      (ORACLE_HOME = G:\app\himanshu\product\11.2.0\dbhome_1)
      (SID_NAME = oradata)
sqlnet.ora
========
SQLNET.AUTHENTICATION_SERVICES = (NTS)
C:\Windows\system32>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 02-FEB-2014 13:53:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=himanshu-PC)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date                02-FEB-2014 13:29:35
Uptime                    0 days 0 hr. 24 min. 6 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   G:\app\himanshu\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         g:\app\himanshu\diag\tnslsnr\himanshu-PC\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=himanshu-PC)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "ORADATA" has 2 instance(s).
Instance "ORADATA", status UNKNOWN, has 1 handler(s) for this service...
Instance "oradata", status READY, has 1 handler(s) for this service...
Service "ORADATAXDB" has 1 instance(s).
Instance "oradata", status READY, has 1 handler(s) for this service...
The command completed successfully
Kindly guide whats wrong with my configuration.

ORADATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL=TCP)(HOST=himanshu-PC)(PORT=1521))
    (CONNECT_DATA =
(SERVICE_NAME = oradata)
(SERVER = DEDICATED)
Try editing the tnsnames.ora file to check there is any junk characters around the tns entry(shown in RED) and then try pining the tns from CMD as
tnsping ORADATA.

Plz help !!!Error ORA-04023: Object could not be validated or authorized

Similar Messages

Maybe you are looking for