Plz Help! How to Store digital certificate on to java card?

We are working on java cards.......
But i don't know how to store digital certificate on to java card?
Any "step-by-step procedure" to follow after getting the certificate will be appriciated.....
Plz any relative information if u have do reply...............
Its urgent..............
Thanks in advance..........

I'm not understanding the confusion. Instead of storing a picture you are storing a certificate. Treat it as a blob of data. You will send data, approx 250 bytes in length, then send the next blob beginning from previous offset, etc. On the card, you store data into a large byte array beginning at the offsets. Read the picture sample again.
You would generate the key pair using the KeyPair class. Send that public key to the CA and store the cert returned from the CA.
If you are attempting PKCS#15, I wouldn't go that route until you understand Java Cards and the PKCS specification.

Similar Messages

How to get digital certificate informaiton of the email in mail adapter

Hi, expert:
I have a requirement to verify the validation of coming email with digital certification. The mail is with digital certification. If the coming email is valid, I 'll get the attachemt of the mail for further processing. I have a sender mail adapter and receiver file adapter configued.
I have already my own developed adapter module, which is configued in mail adapter. My question is how to retrieve the detailed certificate information in the adapter module developed by myself. Is it feasible?
Thanks a lot.

Hi Oscar !!
refer this blog & links , you will get all you are looking for
<b>How to use Digital Certificates for Signing & Encrypting Messages in XI</b>
/people/varadharajan.krishnasamy/blog/2007/05/11/how-to-use-digital-certificates-for-signing-encrypting-messages-in-xi
http://help.sap.com/saphelp_nw04/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm
Thanks !
Regards
Abhishek Agrahari

I deleted my download folder by accident i waz moving it and it just deleted it and showed this smoke. i found it in my trash so put it on my dock then clicked on it and it shows preview?! plz help how do i get it back!!!

i deleted my download folder by accident i waz moving it and it just deleted it and showed this smoke. i found it in my trash so put it on my dock then clicked on it and it shows preview?! plz help how do i get it back!!!

You need to restore the folder using the (Put back) selection (CTRL click).

I wanted to redeem my 15$ itunes card but it says code must be redeemed in the U.S store front ?. plz help me :(, i wanted to redeem my 15$ itunes card but it says code must be redeemed in the U.S store front ?. plz help me :(

plz help me guys.I just got my 15$ iTunes card i wanted to redeem it and it says (the code must be redeemed in the U.S storefront can you guys help me :)

You have posted to the iTunes Match forum, which your question does not appear to be related to. You will get better support replies by posting to the iTunes Store forum.

How to store images in database using java

hii
how to store images in database using java..........
Message was edited by:
naveennaga

I asked a similar question once and the answer I got was - Don't.
Instead, store the images on a drive somewhere and store the path in the database.
But I'm no expert - that's just what I was told by someone who does this kind of stuff a lot.
Hope that helps.

How to Install .CAP file in the Java Card?

Hi Friends..
How to install *.CAP* file in the Java Card?..
I've GPShell script as follows :
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
install_for_load -pkgAID a00000006203010c01 -nvCodeLimit 500 -sdAID A000000003000000
load -file HelloWorld.cap
card_disconnect
release_contextwith that script i can load HelloWorld.cap file successfully..
Now, how to install the HelloWorld.cap file?..
if i add script : load -file HelloWorld.cap i got this error :
install -file HelloWorld.cap
file name HelloWorld.cap
Command --> 80E602001B09A00000006203010C0107A00000015100000006EF04C60201A80000
Wrapped command --> 84E602002309A00000006203010C0107A00000015100000006EF04C60201
A80030C859793049B85300
Response <-- 6985
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of
use not satisfied.)i ask this question because when i tried to select the applet through its AID, by this script :
establish_context
card_connect -readerNumber 2
select -AID a00000006203010c0101i got this message error : select_application() returns 0x80216A82 (6A82: The application to be selected could not be found.)
but there's exactly any that AID in my Java Card..
here's is the list of AID from My Java Card :
C:\GPShell-1.4.2>GPShell listgp211.txt
mode_211
enable_trace
establish_context
card_connect -readerNumber 3
* reader name OMNIKEY CardMan 5x21-CL 0
select -AID a000000003000000
Command --> 00A4040008A000000003000000
Wrapped command --> 00A4040008A000000003000000
Response <-- 6F108408A000000003000000A5049F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
A026E01029000
Command --> 8050000008AAF7A87C6013BC0300
Wrapped command --> 8050000008AAF7A87C6013BC0300
Response <-- 0000715457173C2A8FC1FF0200937A55C288805D8F2A04CCD43FA7E69000
Command --> 848201001023CA18742D36165ED992CFF2146C3D51
Wrapped command --> 848201001023CA18742D36165ED992CFF2146C3D51
Response <-- 9000
get_status -element 10
Command --> 80F21000024F0000
Wrapped command --> 84F210000A4F004FF8BE1492F7275400
Response <-- 0CF0544C00004D4F44554C415201000009A00000006203010C010100010AA000000
06203010C01019000
GP211_get_status() returned 2 items
List of Ex. Load File (AID state Ex. Module AIDs)
f0544c00004d4f44554c4152        1
a00000006203010c01      1
        a00000006203010c0101
card_disconnect
release_contextPlease help me..
And please correct me if i'm wrong,,
Thanks in advance..

Any suggestions for my question?..
Please help me..
Thanks in advance..

Seeking Help for Guidance in developing a product using JAVA CARD

Hi All,
I am using windows environment with netbeans 6.8 as developer tool and MySql Server connectivity for back end process.My requirement is to develop applets and installing them to my Smart card and reader.my question is
1. how i am supposed to create applets to get the student id of particular student whose id is already registered in the database?
2. how to install them into the smart card?
3.what are the commands i am supposed to follow if other than APDU commands?
4.i found there is APDU commands but what do that each CLA,INS,p1,p2,Lc,le..commands used for?how can i use them in my creation of applets.i found the command varies for certain requirements.
5.if possible please help me with a small example so that i will start developing it.
can anyone help me in developing this application.i will be so helpful if anyone helps me in guiding me to develop the java card product.
Edited by: Sijukj on Mar 4, 2010 7:04 AM

Hi,
Welcome to the wonderful world of embedded Java development!
Sijukj wrote:
1. how i am supposed to create applets to get the student id of particular student whose id is already registered in the database?The first step is to download the Java Card Development Kit (JCDK) from the Sun website (along with the related documentation/specifications). If you plan on using your code on a real card, I would recommend JC version 2.2.1 or 2.2.2. If it is sufficient to run your applet on a simulator (as a proof of concept or for assignments) with no intention on running on real hardware you could go for JC 3.0.2 and use the supplied simulator. This version of JC does not have commercially available cards as of yet.
Once you have the applet coded and installed on your card, you would personalise the card for the card holder. This means loading card holder specific data into your application. This may also involve registering the smart card ID with the student in your database.
2. how to install them into the smart card?The procedure for loading and installing applets is outlined in the Java Card documentation (available with the JC development kits from Sun) and the GlobalPlatform card specifications (available from [http://www.globalplatform.org]). You can look into some open source tools for doing this (GPShell and the Java Card Development Kit).
3.what are the commands i am supposed to follow if other than APDU commands?This depends on what you are trying to achieve with your applet. If you want interoperability you could implement a standard like ISO7816 or IOS24727. This is a lot of work so you may just want to implement the proprietary you require for each operation you need (e.g. set student ID, get student ID etc).
4.i found there is APDU commands but what do that each CLA,INS,p1,p2,Lc,le..commands used for?how can i use them in my creation of applets.i found the command varies for certain requirements.These are defined in ISO7816 part 4.
The CLA byte gives information on the command you are sending such as secure messaging, command chaining, ISO or proprietary command
The INS is the instruction or command you are trying to perform
P1 and P2 are parameters to the command. These may not be required for each command but are able to be used to convey further information to the applet.
Lc is the length of the data field you are sending (e.g. for a PUT DATA command this would be the amount of data you are sending)
Le is the length of the data you expect to receive back from the card. If this is absent you do not expect the card to return any data, 0x00 means send all the data you have left (up to the limit of the response APDU)
5.if possible please help me with a small example so that i will start developing it.You can find example code in the Java Card Development Kit. There are a wide range of examples there that can help you get started.
Cheers,
Shane

My Iphone4 will turn off, and it is not on, plz help how to switch on or what is the problem

Hi,
My iphone 4 will turn off on its own and It will not turn on, plz help me

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to use digital certificate for client authentication in PCK

My sap jca adapter need support digital certificate on client authentication. how to implement it in j2ee or pck?
Message was edited by: Spring Tang

refer the following links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/092dddc6-0701-0010-268e-fd61f2035fdd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2a56861-0601-0010-bba1-e37eb5d8d4a9
please let me know if u dont find relevant information

Plz help: how to Add a lens profile ? (mac)

hello
i am having problems with the lens profile.
i am working with raw images and when i open in phoshop cs6 (on Mac) and click on lens correction
cant detect what lens i m using (is the canon 16-35 mm) it just gives me option from other canon lens but not this one
when i click search online - doesnt work as well.
i even downloaded the Adobe lens profile downlaoder and find the profile for the lens and downloaded it but still doesnt apper in photoshop lens correcton.
when i open the image in lens correction in the info box under the image gives all the correct info what camera and lenses are used !! but why there isnt any lenses avalable to select when tried to edit the image??
please help how to Add a lens profile from Adobe lens profile downlaoder or how to add in anather way canon lenses.
thank you

can anyone help please?

Store array of objects in Java Card 2.2.1 platform

Hi all,
I am new to smart card development and developing a demo e-wallet application using Java Card 2.2.1 SDK. I'd like to store last 10 transactions in card and create getter-setter methods. The structure of Transaction that i thought as follow:
public class Transaction {
     private byte type; // + or -
     private short amount;
     private byte[] date;
[Date format: "yyyy-MM-dd HH:mm:ss"]And transactionList:
public class TransactionList {
     protected short currentIndex = (short) -1;
     protected Transaction [] list = new Transaction [10];
}In my desktop application i have already called card's selectApplication(); / getBalance(); / setBalance(); / getWalletId(); / setWalletId(); methods. I need to create a method [getLastTransactions] in card project and call it from my desktop application.
<font size="2">How should I set up a structure for this issue?</font>

First of all don't allocate memory other than the constructor.
As you know you cannot return an object as a response from a java card so what you will get is just bytes of data. So create a byte[] of size equal to LAST_10_TRANSTION_SIZE and then by TLV store data into that array and upon receiving on host side decode it using the TLV.

How to check the output of a java card program ?

Hi,
I am new to java card technology.I am trying to run a simple helloworld program given in the java development kit2.2 -windows samples in eclipse3.5.
For running I followed the following steps:-
1) Firstly,I went to JCWDE->start
2) then on Project->java tools->deploy
It shows me following output :-
Java Card 2.2.2 APDU Tool, Version 1.3
Copyright 2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
Opening connection to localhost on port 9025.
Connected.
Received ATR = 0x3b 0xf0 0x11 0x00 0xff 0x00
CLA: 00, INS: a4, P1: 04, P2: 00, Lc: 09, a0, 00, 00, 00, 62, 03, 01, 08, 01, Le: 00, SW1: 90, SW2: 00
CLA: 80, INS: b0, P1: 00, P2: 00, Lc: 00, Le: 00, SW1: 90, SW2: 00
CLA: 80, INS: b2, P1: 01, P2: 00, Lc: 00, Le: 00, SW1: 90, SW2: 00
CLA: 80, INS: b4, P1: 01, P2: 00, Lc: 18, 01, 00, 15, de, ca, ff, ed, 01, 02, 04, 00, 01, 0b, 01, 02, 03, 04, 05, 06, 07, 08, 09, 00, 01, Le: 00, SW1: 64, SW2: 3a
CLA: 80, INS: bc, P1: 01, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b2, P1: 02, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 02, P2: 00, Lc: 20, 02, 00, 1f, 00, 15, 00, 1f, 00, 0f, 00, 15, 00, 36, 00, 0c, 00, 69, 00, 0a, 00, 14, 00, 00, 00, 6c, 00, 00, 00, 00, 00, 00, 02, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 02, P2: 00, Lc: 02, 01, 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: bc, P1: 02, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b2, P1: 04, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 04, P2: 00, Lc: 18, 04, 00, 15, 02, 03, 01, 07, a0, 00, 00, 00, 62, 01, 01, 00, 01, 07, a0, 00, 00, 00, 62, 00, 01, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: bc, P1: 04, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b2, P1: 03, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 03, P2: 00, Lc: 12, 03, 00, 0f, 01, 0b, 01, 02, 03, 04, 05, 06, 07, 08, 09, 00, 00, 00, 14, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: bc, P1: 03, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b2, P1: 06, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 06, P2: 00, Lc: 0f, 06, 00, 0c, 00, 80, 03, 01, 00, 01, 07, 01, 00, 00, 00, 21, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: bc, P1: 06, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b2, P1: 07, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 07, P2: 00, Lc: 20, 07, 00, 69, 00, 02, 10, 18, 8c, 00, 01, 18, 11, 01, 00, 90, 0b, 87, 00, 18, 8b, 00, 02, 7a, 02, 30, 8f, 00, 03, 3d, 8c, 00, 04, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 07, P2: 00, Lc: 20, 8b, 00, 02, 7a, 05, 23, 19, 8b, 00, 05, 2d, 19, 8b, 00, 06, 32, 03, 29, 04, 70, 19, 1a, 08, ad, 00, 16, 04, 1f, 8d, 00, 0b, 3b, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 07, P2: 00, Lc: 20, 16, 04, 1f, 41, 29, 04, 19, 08, 8b, 00, 0c, 32, 1f, 64, e8, 19, 8b, 00, 07, 3b, 19, 16, 04, 08, 41, 8b, 00, 08, 19, 03, 08, 8b, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 07, P2: 00, Lc: 0c, 00, 09, 19, ad, 00, 03, 16, 04, 8b, 00, 0a, 7a, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: bc, P1: 07, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b2, P1: 08, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 08, P2: 00, Lc: 0d, 08, 00, 0a, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: bc, P1: 08, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b2, P1: 05, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 05, P2: 00, Lc: 20, 05, 00, 36, 00, 0d, 02, 00, 00, 00, 06, 80, 03, 00, 03, 80, 03, 01, 01, 00, 00, 00, 06, 00, 00, 01, 03, 80, 0a, 01, 03, 80, 0a, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 05, P2: 00, Lc: 19, 06, 03, 80, 0a, 07, 03, 80, 0a, 09, 03, 80, 0a, 04, 03, 80, 0a, 05, 06, 80, 10, 02, 03, 80, 0a, 03, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: bc, P1: 05, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b2, P1: 09, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: b4, P1: 09, P2: 00, Lc: 17, 09, 00, 14, 00, 03, 0e, 27, 2c, 00, 0d, 05, 0c, 06, 04, 03, 07, 05, 10, 0c, 08, 09, 06, 09, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: bc, P1: 09, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
CLA: 80, INS: ba, P1: 00, P2: 00, Lc: 00, Le: 00, SW1: 64, SW2: 21
Can anyone tell me what is this output? And Am i deplyoing in the right way?

Hi,
You might want to check the JCDK user guide (cJDK_Users_Guide_bin_do.pdf) for details of using an emulated card environment. It outlines how to use the simulators provided with the JCDK. This should tell you how the deploy process works and will give you some insight into what this script is doing.
Cheers,
Shane

How to find out memory of a java card

is there anyone could tell me that how can we check the size of the memory of a card? thank you in advance:D

If the card is a Java Card 2.2.1, create an applet that returns
JCSystem.getAvailableMemory(), install and queryit.
Some other ideas for getting the free memory on card were presented in the thread "Java Forums - Free memory on card"
http://forum.java.sun.com/thread.jspa?threadID=647894&tstart=30
Jan

How to ensure applet is written in java card?

Hi all,
I have written a java card applet, in which i am using the Biometry API of java card to enroll a fingerprint template in java card. Code is attached below:
package classicapplet1;
import javacard.framework.*;
import javacardx.biometry.BioBuilder;
import javacardx.biometry.OwnerBioTemplate;
import javacardx.biometry.SharedBioTemplate;
import javacardx.biometry.BioException;
public class JavaBiometrics extends Applet implements SharedBioTemplate{
        public final static byte CLA = (byte)0xCF;
     public final static byte INS_ENROLL = (byte)0x10;
     public final static byte MATCH_TRY_LIMIT = (byte)3;
     public final static byte INVALID_DATA = (byte)0x77;
     public final static byte ERROR_MATCH_FAILED = (byte)0x9101;
     public static final byte CARD_ENROLL_SUCCESS = (byte)0x9000;
     public static final byte CARD_ENROL_FAILED = (byte)0x6900;
     private OwnerBioTemplate bio_temp;
     * Installs this applet.
     * @param bArray
     *            the array containing installation parameters
     * @param bOffset
     *            the starting offset in bArray
     * @param bLength
     *            the length in bytes of the parameter data in bArray
    public static void install(byte[] bArray, short bOffset, byte bLength) {
        new JavaBiometrics(bArray, bOffset, bLength);
     * Only this class's install method should create the applet object.
    protected JavaBiometrics(byte[] bArray, short bOffset, short bLength) {
    byte aidLen = bArray[bOffset];
          if(aidLen == (byte)0)
               register();
          else
               register(bArray, (short)(bOffset+1), aidLen);
          bio_temp = BioBuilder.buildBioTemplate(BioBuilder.FINGERPRINT, MATCH_TRY_LIMIT);
public boolean select()
return true;
     * Processes an incoming APDU.
     * @see APDU
     * @param apdu
     *            the incoming APDU
    public void process(APDU apdu) {
        //get the incoming APDU buffer
     byte []buffer = apdu.getBuffer();
     //Get the CLA; mask out the logical-channel info
     buffer[ISO7816.OFFSET_CLA] = (byte)(buffer[ISO7816.OFFSET_CLA] & (byte)0xFC);
     //If the INS Select, return -no need to process select
     if(buffer[ISO7816.OFFSET_CLA] == 0 && buffer[ISO7816.OFFSET_INS] == (byte)(0xA4))
          return;
     //If unrecognized class, return "Unsupported class."
     if(buffer[ISO7816.OFFSET_CLA] != CLA)
          ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
     switch(buffer[ISO7816.OFFSET_INS])
     case INS_ENROLL:
          enroll(apdu);
          break;
     default:
          ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
public void enroll(APDU apdu)
        byte[] buffer = apdu.getBuffer();
        short bytesRead = apdu.setIncomingAndReceive();
        bio_temp.init(buffer, ISO7816.OFFSET_CDATA, bytesRead);
        bio_temp.doFinal();
    public Shareable getShareableInterfaceObject(AID clientAID, byte parameter) {
        return this;
///////////// These methods implemets the ShareableBio interface///////////////
public boolean isInitialized() {
        return bio_temp.isInitialized();
    public boolean isValidated() {
        return bio_temp.isValidated();
    public void reset() {
        bio_temp.reset();
    public byte getTriesRemaining() {
        return bio_temp.getTriesRemaining();
    public byte getBioType() {
        return bio_temp.getBioType();
    public short getVersion(byte[] dest, short offset) {
        return bio_temp.getVersion(dest, offset);
    public short getPublicTemplateData(short publicOffset, byte[] dest, short destOffset, short length)
            throws BioException {
        return bio_temp.getPublicTemplateData(publicOffset, dest, destOffset, length);
    public short initMatch(byte[] candidate, short offset, short length) throws BioException {
        return bio_temp.initMatch(candidate, offset, length);
    public short match(byte[] candidate, short offset, short length) throws BioException {
        return bio_temp.match(candidate, offset, length);
Problem :
I have developed this program in Netbeans using java card plug ins. when i am running this program, all the required CAP files and EXP files are generated.
Now, i have to write this applet on java card through a card reader. My card reader is installed in an embedded system GeoAmida with IP 192.133.133.2 and port number 6789.
I have used the following settings for my java card device in Netbeans:
Host : 192.133.133.2
Server URL: http://192.133.133.2:6789/
Card Manager URL: http://192.133.133.2:6789/cardmanager/
HTTP port: 6789
The output shows me that Instances of this program has been successfully has been created on java card.
But the problem is how can i ensure that my applet is been successfully installed on the java card?
The code of host application program, accessing the developed java card applet is given below (it is written in C):
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <smartcard.h>
int main()
     int ret, i, smartcard;
     unsigned char applet_id[100], apdu_len, apdu[300],response[300]={0};
     smartcard_info *context;
     smartcard=CONTACTLESS;
     //smartcard=CONTACT_BOT;
     if((context = smartcard_init(smartcard)) == NULL){
          printf("Smartcard Initi. Failed\n");
          return 0xBB;
     /* checking for smartcard */
     while (1){
          if(ret=smartcard_is_present(context, smartcard)!=0)
               sleep(1);
          else
               break;
     printf("Selecting Applet \n");
     i = 0;
     applet_id[i++]=0x00; applet_id[i++]=0xA4; applet_id[i++]=0x04; applet_id[i++]=0x00; applet_id[i++]=0x06;
     applet_id[i++]=0xA9; applet_id[i++]=0xBF; applet_id[i++]=0xA2; applet_id[i++]=0xB6; applet_id[i++]=0xB1; applet_id[i++]=0x3E; applet_id[i++]=0x7F;
     if ((ret=smartcard_select_applet(context, smartcard, applet_id, i))!=0){
          printf("select applet failed %02x\n",ret);
          return ;
     printf("Applet Selection Success \n");
#if 1
     i=0;
     apdu[i++]=0xCF; apdu[i++]=0x10; apdu[i++]=0x04; apdu[i++]=0x04; apdu[i++]=0x7F;
     //apdu[i++]=0x3F; apdu[i++]=0x00;
     apdu_len = i;
     printf("Sending APDU command\n");
     if ((ret=smartcard_apdu(context, smartcard, apdu, apdu_len, response))!=0){
          printf("apdu failed %d\n",ret);
          //return;
     }else
          printf("APDU Success\n");
     //printf("\n");
#endif
     smartcard_deinit(context);
     return 0;
}The output of this program is showing me that applet is been successfully selected, but APDU selection failed. Please solve this problem as soon as possible, because my project is deadline is not very much far.
Thanks in advance.
Mukul Gupta

Hi Shane,
I am getting error 6a86 which means that value of P1 is less than 1 or more than 8, and we have to change its value to any in between 1 to 8. I did that also but error still remains :(
Please tell me what is reason behind this error. And, i'll try out your previous solution today, Thanks for it.

Please help error regarding GPShell 1.4.2 with Java Card 2.2.1

Hi masters..
please help me regarding GPShell + Smart Card Reader (namely Omnikey Cardman 5321)..
currently i've a smart card reader (Omnikey) and a sample java card that support for Java Card 2.2.1..
i've installed Smart card reader's driver, and it has already completely function..
When i try to run this command in GPShell 1.4.2, i get this report :
C:\GPShell-1.4.2>GPShell helloInstallgemXpressoProR3_2E64.txt
mode_201
gemXpressoPro
enable_trace
establish_context
card_connect
* reader name OMNIKEY CardMan 5x21 0
card_connect() returns 0x80100069 (The smart card has been removed, so that furt
her communication is not possible.
select -AID A000000018434D00
Command --> 00A4040008A000000018434D00
Wrapped command --> 00A4040008A000000018434D00
select_application() returns 0x00000006 (The handle is invalid.
Yes, i know that in that script (helloInstallgemXpressoProR3_2E64.txt), there's a script for load helloworld.cap into Java card..
i tried that because i just want to make sure whether my Java Card run well or not..
Please help me regarding this..
Thanks in advance..

Hi safarmer, thanks for your reply :)..
Sorry before, i still don't understand about your last reply.. :(
especially for check the crytpogram.. :(
could you describe what mean of each line of code from that snippet code?..
Sequence : 0002
challenge : 598dd3961bfd
cryptogram : 24cccf18c18437bb
host : 5a7787ba91497948
DEBUG [] - Input to session S-ENC derivation: 01820002000000000000000000000000
DEBUG [] - S-ENC: adc1163ba2a146fbb94af44c8676fb7cadc1163ba2a146fb
DEBUG [] - Input to session DEK derivation : 01810002000000000000000000000000
DEBUG [] - S-DEK: fd01086b6db03bdfe0d5cb61d03ed3abfd01086b6db03bdf
DEBUG [] - Input to session CMAC derivation: 01010002000000000000000000000000
DEBUG [] - S-MAC: 3e07b0c8fdfd798a573b9b9889d0cb513e07b0c8fdfd798a
Input to card cryptogram verification: 5a7787ba914979480002598dd3961bfd8000000000000000
DEBUG [] - Signature : 24cccf18c18437bb
DEBUG [] - Cryptogram: 24cccf18c18437bb
Card cryptogram authenticated=======================================================================================
=======================================================================================
i've added script "mode_211" to my script, as follow :
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
select -AID a0000000030000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
delete -AID a00000006203010c0101
delete -AID a00000006203010c01
delete -AID a00000006203010c0101
install -file HelloWorld.cap -nvDataLimit 500 -instParam 00 -priv 2
card_disconnect
release_contextbut when i executed that script in the console, i got this :
C:\GPShell-1.4.2>GPShell helloInstallChan.txt
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
* reader name OMNIKEY CardMan 5x21-CL 0
select -AID a0000000030000
Command --> 00A4040007A0000000030000
Wrapped command --> 00A4040007A0000000030000
Response <-- 6F108408A000000003000000A5049F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
A026E01029000
Command --> 80500000083C4E03633407EC1800
Wrapped command --> 80500000083C4E03633407EC1800
Response <-- 0000715457173C2B8FC1FF020002598DD3961BFD8B6F2963C070FF949000
Command --> 8482010010E17B69E2A3DFEA320B0B457657362614
Wrapped command --> 8482010010E17B69E2A3DFEA320B0B457657362614
Response <-- 9000
delete -AID a00000006203010c0101
Command --> 80E400800C4F0AA00000006203010C010100
Wrapped command --> 84E40080144F0AA00000006203010C0101D259A163E654B99900
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID a00000006203010c01
Command --> 80E400800B4F09A00000006203010C0100
Wrapped command --> 84E40080134F09A00000006203010C01094A9BF13AD2CC3E00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID a00000006203010c0101
Command --> 80E400800C4F0AA00000006203010C010100
Wrapped command --> 84E40080144F0AA00000006203010C010156679B9711B83FAB00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
install -file HelloWorld.cap -nvDataLimit 500 -instParam 00 -priv 2
file name HelloWorld.cap
Command --> 80E602001F09A00000006203010C0107A0000000030000000AEF08C60201A8C80201
F40000
Wrapped command --> 84E602002709A00000006203010C0107A0000000030000000AEF08C60201
A8C80201F400D35F07F1D11A31E500
Response <-- 6985
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)What it does mean?..
so, can i reset THE RETRY COUNTER of my Java Card?..
could you give me an example script that reset the Retry Counter?..
Thanks in advance..
Sorry i really confuse.. :(

Plz Help! How to Store digital certificate on to java card?

Similar Messages

Maybe you are looking for