Plz help me about allignment of Jscrollpane and JTable
Hi...
I am currently working for a mini project with platform as JAVA.
I used Grid Bag Layout for allignment of all buttons and textfields.
I have 18 columns and 20 rows to be added to a JTable.
My problem is that the JScrollPane is fixed and is not moving.
The table displays all columns with each column in a row showing partial details with. ...(elipsis)
My requirement is each column should be wide enough and should show remaining rows and columns when scrolled instead of showing narrowly everything at once and scrollpanes remaining tight.
If any one does this favour, i will be somuch grate ful to u.
Thanks
I used Grid Bag Layout for allignment of all buttons and textfields.Use multiple different nested layout managers to get the desired layout.
Give it another try.
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.
Similar Messages
-
Plz help me about clustering and loadbalancing
hi all
plz help me about clustering and loadbalancing
how to do clustering and loadbalancing in tomcat ?I used Grid Bag Layout for allignment of all buttons and textfields.Use multiple different nested layout managers to get the desired layout.
Give it another try.
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area. -
Hi plz help me about Illustrator CS5
i wanted to know how i turn off my pdf compatibility in Illustrator CS5. i m using the middle east version of CS5. when i m going to save my arabic font it is giving error cannot save the file as the font could not be embedded because of licensing restriction plz turn off your pdf compatibility and then try again.
plz help me about this error how i solve this error and i can save this file with font.Even if you could uncheck the PDF compatibility option--I don't have the Middle Eastern version so cannot look for it--no one would be able to read the PDF except those with the exact font installed on their system.
Can you use a font that allows embedding?
Take care, Mike -
Plz help me my facetime not working and no have facetime app
plz help me my facetime not working and no have facetime app
In what way is it not working?
Which iPhone do you have?
Which iOS version?
Where did you purchase your iPhone?
Any info at all about your issue? -
Plz help me about my Iphone 5s battary life is so bad without using in the night keep on after 6 hours morning when i open battary % lose 60 percentage with out using plz help me..
Maximize iPhone Battery (iOS7):
1) Turn off Airdrop: Control Center >AirDrop > Off
2) Limit background app refresh. Turn it off for applications such as Google/Facebook.Settings > General > Background App Refresh
3) Turn off automatic updates: Settings > iTunes & App Store > Updates and Apps (off)
4) Unneccessary Location Services: Settings > Privacy > Location Services > System Services > Off (uncheck as needed)
5) Turn off Paralax: Settings > General > Accessibility > Reduce Motion
6) Siri, and her 'raise to speak.' Turn it off: Settings > General > Siri > Raise to Speak
7) Exclude items from Spotlight search as needed: Settings > General > Spotlight Search
8) Remove unneccessary notifications: Settings > Notification Center > None (per app basis)
9) Make sure auto-brightness is on, or reduce the brightness to 25% or less if desired.Settings > Wallpapers & Brightness
10) Use Still backgrounds only: Settings > Wallpapers & Brightness> Choose Wallpaper
11) Fetch email instead of "Push": Settings > Mail, Contacts, Calendar > Fetch New Data >Push(off) & Fetch every 15 minutes
12) Disable LTE if needed: Settings > Cellular > Enable 4G/LTE (OFF)
13) Reduce Autolock: Settings > General > Auto-Lock > 1 Minute
14) Disable Vibrations with Ring: Settings > Sounds > Vibrate on Ring (off)
15) Close Applications regularly: Double Tap Home Button > Swipe up on App to close -
Hi plz help me to find out the table name and field names as i am unable to find .....In the spec am given requirements in the following pattern.
Description SAP-Term Explaination
1.Salesman Equipment AC Mgr. VBPA2 this is the salesman code - I need the
description for this.
2.Vendor MEPO_TOPLINE-SUPERFIELD Vendor field is pull from me23n where the
condition will be that COBL-KDAUF (this is a
structure from me23n in item data-account
assignment-sales order. The number here should
be the corresponding contract number. This field
should include a multiple selection function. User
can put more than one description to search for.
3. Val. Period Val. Period Category Val. Period Category from va41 header-contract
Category data. This field should include a multiple selection
function. User can put more than one description
to search for.
4. Service Order/ CAUFVD-GSTRP/ This should be the document date where by it is in
Purchase Order MEPO_TOPLINE-BEDAT between the range the user input
Document Date
5. B2B Vendor MEPO_TOPLINE-SUPERFIELD Vendor field is pull from me23n where the condition
will be that COBL-KDAUF (this is a structure from
me23n in item data-account assignment-sales
order. The number here should be the
corresponding contract number.
6. B2B Cost MEPO1211-NETPR This cost is pulled from PO (me23n) however take
note that the price will be pulled out base on line
item Net Price. Make sure that price is taken
corresponding only to the equipment tied to it.
Check on Number 7 to see how is the line item tied
to the equipment.
If this is in other currency please make it to SGD
with the exchange rate field Exchange rate
(MEPO1226-WKURS)
NOTE:: I need to know the table from which I can
determine the currency type as can be seen in the
ME23N transaction and also te exchange rate for
that particular currency.
7. No of faults The service order (CAUFVD-AUFNR) created base
on the equipment in Number 8. This should exclude
the service order of type RD08. Service order can be
access by IW33.
8. Faults Completed This would be the number of faults (Number 13)
which has a system status (CAUFVD-STTXT) of
TECO. System status can be viewed in IW33 Sys.
Status. Take note service order type RD08 will be
excluded
9. Time Spent on Fault AFVGD-ISMNW This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults
Completed (Number 14). This means only orders
with system status TECO will be pull. Take not
service order type RD08 will be excluded
10. Fault Cost RIHAUFK_LIST- DGESKOSIST This will be the total cost for a service order which
have the status TECO. Those which are not TECO
will not be needed. This field can be obtain from
IW39 (standard report). Execute the report and
there will be a field for Total Actual Cost. You might
need to change the screen layout to be able to view
this. Take note service order type RD08 will be
excluded
11. PM Hours AFVGD-ISMNW This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults Completed
This means only orders with system
status TECO will be pull. Take note service only
take order type RD08.
12. Spare Cost Spare part cost This field will be in IW33 under cost tab, and cost
PMCOEA-IKOSTENKGR tab in item level. This will be the actual cost of spare
part after TECO. This will include all order type.
13. Credit Note Credit Memo The programs need to pull out credit memo which is
reference from the contract. If there is a credit memo
reference from the contract then the value will be net
price per equipment.Can u tell me purpose of this spec ?
Regards,
pandu. -
Plz helP me about the new FW (software) v4.0750.31...
plz help me i was update new FW v4.0750.31.2.1
but found too bugs in music player i cant save the preset and the sogs was download in memory always bad file when i play it.
and the camera light is very little and not pure.
plz I wanna the old version to my phone which i bought by it but i dont now it
plz help me what can i do?same like the rest of us you can do absolutely nothing except wait for a new version to release
-
i typed it wrong sorry can't someone help me i will tell u guys what u wanna no plz i really can't live without my ipod touch i miss it so much so plz message me
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Plz help! Multi-byte input method and JPasswordField in java 1.4
Hello
I got JTextField and JPasswordField in one dialog. I enter multi-byte text into text field, using Microsoft IME, switch focus into password text field without changing input method, and now all text entered in password text field appear in previous visited text field. This issue actual only in java 1.4 and disappear in java 1.5. Is anyone now what can i do to fix it in java 1.4? thanks!kajbj wrote:
Stromberg wrote:
VishalKothari wrote:
Help me out regarding datatype of 'x' in the switch(x) statement. Is it only byte and char?any primitive typeNo, not boolean, double or float.oooops -
N73 PLZ HELP ME ABOUT NEW fw 4.050.31.2.1
I WANT TO DOWNLOAD THE NEW FW 4.0750.31.2.1 BUT I DONT KNOW WHAT CODE FOR MY PHONE
ATTENTION>>>>> MY PHONE (N73 NORMAL) BUT I WAS DOWNLOAD IN CARE NOKIA (SOFTWARE MUSIC EDITION)
IS IT MUST ME ENTER CODE MUSIC EDITION OR CODE MY PHONE UNDER MY BATTERY SHOWsince your phone was normal and you updated to music edition so in future if you do a update it will resume back to normal.enter the code behind the battery.kindly check the software version in phone and available on NSU.
Message Edited by navigator on 28-Jan-2008 06:57 AM
tongue is too confused on what to speak -
Need help with inserting rows in ResultSet and JTable
hello Guru!
i have inserted a row in my result set and i want that my table shows this row promptly after i have inserted it in my result set...
but when i use following code for my resultset:
rs.moveToInsertRow();
rs.updateInt(1,nr);
rs.updateString(2, name);
rs.insertRow();
Record are inserted in resultset and database but not shown in my JTable??
Anyone a Clue to without reexecuting the query how can i display inserted row in JTable
http://download-west.oracle.com/docs/cd/A87860_01/doc/java.817/a83724/resltse7.h
I have refrered the following links but still clue less help Guruuuuuuu
i m really in trobble??????i am just near by the Solution using the Database Metadata
by couldn't get the ideaaaa
==================================================
http://download-west.oracle.com/docs/cd/A87860_01/doc/java.817/a83724/resltse7.htm
Seeing Database Changes Made Internally and Externally
This section discusses the ability of a result set to see the following:
its own changes (DELETE, UPDATE, or INSERT operations within the result set), referred to as internal changes
changes made from elsewhere (either from your own transaction outside the result set, or from other committed transactions), referred to as external changes
Near the end of the section is a summary table.
Note:
External changes are referred to as "other's changes" in the Sun Microsystems JDBC 2.0 specification.
Seeing Internal Changes
The ability of an updatable result set to see its own changes depends on both the result set type and the kind of change (UPDATE, DELETE, or INSERT). This is discussed at various points throughout the "Updating Result Sets" section beginning on , and is summarized as follows:
Internal DELETE operations are visible for scrollable result sets (scroll-sensitive or scroll-insensitive), but are not visible for forward-only result sets.
After you delete a row in a scrollable result set, the preceding row becomes the new current row, and subsequent row numbers are updated accordingly.
Internal UPDATE operations are always visible, regardless of the result set type (forward-only, scroll-sensitive, or scroll-insensitive).
Internal INSERT operations are never visible, regardless of the result set type (neither forward-only, scroll-sensitive, nor scroll-insensitive).
An internal change being "visible" essentially means that a subsequent getXXX() call will see the data changed by a preceding updateXXX() call on the same data item.
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean ownDeletesAreVisible(int) throws SQLException
boolean ownUpdatesAreVisible(int) throws SQLException
boolean ownInsertsAreVisible(int) throws SQLException
Note:
When you make an internal change that causes a trigger to execute, the trigger changes are effectively external changes. However, if the trigger affects data in the row you are updating, you will see those changes for any scrollable/updatable result set, because an implicit row refetch occurs after the update.
Seeing External Changes
Only a scroll-sensitive result set can see external changes to the underlying database, and it can only see the changes from external UPDATE operations. Changes from external DELETE or INSERT operations are never visible.
Note:
Any discussion of seeing changes from outside the enclosing transaction presumes the transaction itself has an isolation level setting that allows the changes to be visible.
For implementation details of scroll-sensitive result sets, including exactly how and how soon external updates become visible, see "Oracle Implementation of Scroll-Sensitive Result Sets".
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean othersDeletesAreVisible(int) throws SQLException
boolean othersUpdatesAreVisible(int) throws SQLException
boolean othersInsertsAreVisible(int) throws SQLException
Note:
Explicit use of the refreshRow() method, described in "Refetching Rows", is distinct from this discussion of visibility. For example, even though external updates are "invisible" to a scroll-insensitive result set, you can explicitly refetch rows in a scroll-insensitive/updatable result set and retrieve external changes that have been made. "Visibility" refers only to the fact that the scroll-insensitive/updatable result set would not see such changes automatically and implicitly.
Visibility versus Detection of External Changes
Regarding changes made to the underlying database by external sources, there are two similar but distinct concepts with respect to visibility of the changes from your local result set:
visibility of changes
detection of changes
A change being "visible" means that when you look at a row in the result set, you can see new data values from changes made by external sources to the corresponding row in the database.
A change being "detected", however, means that the result set is aware that this is a new value since the result set was first populated.
With Oracle8i release 8.1.6 and higher, even when an Oracle result set sees new data (as with an external UPDATE in a scroll-sensitive result set), it has no awareness that this data has changed since the result set was populated. Such changes are not "detected".
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean deletesAreDetected(int) throws SQLException
boolean updatesAreDetected(int) throws SQLException
boolean insertsAreDetected(int) throws SQLException
It follows, then, that result set methods specified by JDBC 2.0 to detect changes--rowDeleted(), rowUpdated(), and rowInserted()--will always return false with the 8.1.6 Oracle JDBC drivers. There is no use in calling them.
Summary of Visibility of Internal and External Changes
Table 12-1 summarizes the discussion in the preceding sections regarding whether a result set object in the Oracle JDBC implementation can see changes made internally through the result set itself, and changes made externally to the underlying database from elsewhere in your transaction or from other committed transactions.
Table 12-1 Visibility of Internal and External Changes for Oracle JDBC
Result Set Type Can See Internal DELETE? Can See Internal UPDATE? Can See Internal INSERT? Can See External DELETE? Can See External UPDATE? Can See External INSERT?
forward-only
no
yes
no
no
no
no
scroll-sensitive
yes
yes
no
no
yes
no
scroll-insensitive
yes
yes
no
no
no
no
For implementation details of scroll-sensitive result sets, including exactly how and how soon external updates become visible, see "Oracle Implementation of Scroll-Sensitive Result Sets".
Notes:
Remember that explicit use of the refreshRow() method, described in "Refetching Rows", is distinct from the concept of "visibility" of external changes. This is discussed in "Seeing External Changes".
Remember that even when external changes are "visible", as with UPDATE operations underlying a scroll-sensitive result set, they are not "detected". The result set rowDeleted(), rowUpdated(), and rowInserted() methods always return false. This is further discussed in "Visibility versus Detection of External Changes".
Oracle Implementation of Scroll-Sensitive Result Sets
The Oracle implementation of scroll-sensitive result sets involves the concept of a window, with a window size that is based on the fetch size. The window size affects how often rows are updated in the result set.
Once you establish a current row by moving to a specified row (as described in "Positioning in a Scrollable Result Set"), the window consists of the N rows in the result set starting with that row, where N is the fetch size being used by the result set (see "Fetch Size"). Note that there is no current row, and therefore no window, when a result set is first created. The default position is before the first row, which is not a valid current row.
As you move from row to row, the window remains unchanged as long as the current row stays within that window. However, once you move to a new current row outside the window, you redefine the window to be the N rows starting with the new current row.
Whenever the window is redefined, the N rows in the database corresponding to the rows in the new window are automatically refetched through an implicit call to the refreshRow() method (described in "Refetching Rows"), thereby updating the data throughout the new window.
So external updates are not instantaneously visible in a scroll-sensitive result set; they are only visible after the automatic refetches just described.
For a sample application that demonstrates the functionality of a scroll-sensitive result set, see "Scroll-Sensitive Result Set--ResultSet5.java".
Note:
Because this kind of refetching is not a highly efficient or optimized methodology, there are significant performance concerns. Consider carefully before using scroll-sensitive result sets as currently implemented. There is also a significant tradeoff between sensitivity and performance. The most sensitive result set is one with a fetch size of 1, which would result in the new current row being refetched every time you move between rows. However, this would have a significant impact on the performance of your application.
how can i implement this using
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean deletesAreDetected(int) throws SQLException
boolean updatesAreDetected(int) throws SQLException
boolean insertsAreDetected(int) throws SQLException -
Error while trying to synchronize Audio and MIDI. plz help i cant hear anything
plz help me i cant hear nothing and its says: Error while trying to synchronize Audio and MIDI.
Sample Rate 38536 recognized.
Check conflict between Logic Pro X and external device. ???????? PLZ HELPIt means you are overtaxing the CPU, likely with just one (3rd party-)software instrument plugin. Ignore the word "external", in this context it often means "3rd party plugin".
So what synth is it? Since you're Dutch, it's probably one of the trancy dancy synths, such as Albino, Diva, Sylenth or Massive... I could be wrong though...
The best way to avoid this message is to Freeze the track with the guilty synner - however, a frozen track cannot be edited, so if that is a problem, you will have to make the synth itself run lighter, which can be achieved by turning of internal effects that are ON the synth itself, especially reverb.
http://help.apple.com/logicpro/mac/10/#lgcpf1cbfd51 -
Plz help me,i did everything and nothing has worked,im going insane!!!
Hello people,for months ive tried fixing my i-pod and nothing has worked....i try to restore my ipod maybe that would fix da problem but when i press the program,it says ipod service error,and before that it worked ok,it said preparing and stuff but it never stoped perapring the ipod it just got stuck,and in my itunes i see my ipod,but i cant put no music in it?Therefore i have the 2 colour lights all the time when i try to play it.and also when i try to update my ipod with the program u download from the net it says in the end of the installation:Service could not be deleted.All these problems,could someone plz help me,im turning insane!And i cant refund my ipod because i lost my recite and also the store isnt anymore there(My luck)but plz somebody answer me,thank u
I believe the green and orange light flashing means that you have no music on your iPod Shuffle (which seems correct as you have performed a restore). That is the way the iPod Shuffle tells you that it is looking for the next song. When the iPod Shuffle is plugged into your computer (XP user myself) the orange light is suppose to flash on and off (both the battery light if charging and the front light). When updating the iPod using the updater, I received the same error you received (iPod service error), but I believe it was because I was trying to update my iPod with the Sept 05 version when the iPod already had the Jan 06 update on it. I also noticed the "preparing" bug that you mentioned, by simply selecting next, the restore continues correctly. Once I restored my iPod to the factory settings AND performed the restore process THREE times using the Sept 05 updater (what came with my iPod Shuffle) I was able to store music AND listen to it once disconnected from my computer. My next task is to update the iPod with the Jan 06 update and try the process again but I believe there is a driver issue with this version and it may not work. If this is the case, I will just stick with the software received with the iPod. For you, I would attempt to reinstall the software from the CD that was provided with you iPod Shuffle, restore your iPod Shuffle to the factory settings and do this restore THREE times, start iTunes, once the iPod Shuffle shows up in the Source listing right click on it and select Update. Make sure songs copy over (the top centre of iTunes will tell you the status of the update) and finally disconnect and try playing music.
-
Help me nokia asha 306 Plz Help Me
Hellow dear sir
plz help me about nokia asha 306.
my nokia asha 306 is not sport jar file.
i update my mobile v7.42 07-05-13
when the orignal softwere not this problam
plz give the new softwere of nokia asha 306
waiting 4 your reply
thanks
***Alone***I request you to kindly re-install the software of your Nokia device. Before re-installing the software kindly take the backup of your device.
Please follow below mentioned steps to take backup of your phone:
1. Connect your phone with PC via USB cable.
2. Select Nokia Suite mode.
3. Run Nokia Suite Application.
4. Click on Tools.
5. Click on Backup.
6. Click on Next.
7. Select Content for Backup.
8. Click on Start to perform Backup Operation.
To restore device backup please follow below mentioned steps:
1. Connect your phone with PC via USB cable.
2. Select Nokia Suite mode.
3. Run Nokia Suite Application.
4. Click on Tools.
5. Click on Restore.
6. Select the latest backup file from your PC.
7. Click on Start to restore.
Note: Your device should be fully charged before backup and restore.
To re-install your phone software, please connect your device via Nokia Suite and follow below mentioned steps:
1. Go to Tools.
2. Click on Software Update.
3. On the Software Updates page, under your device click the reinstall link to start the wizard that will guide you through the reinstallation of your device software
Note: Before re-installing, please remember following points:
1. Take backup of your devices using Nokia Suite.
2. Your device should be fully charged.
Please "Do Not Remove" your device during re-installing process.
You can access the link mentioned below in order to download Nokia Suite:
www.nokia.com/nokiasuite
In respect of the concern regarding Orkut , Chatting application, Social application, Music applications I request you to download related applications from Nokia Store by accessing the below mentioned link:
www.store.ovi.com
Further, I would like to inform you that you can download the map data using Nokia suite. But for this you have to connect your device with PC and have to run Nokia suite in your PC. Kindly follow the below mentioned steps to download Map application:
1. Connect Device to PC using USB.
2. Launch Nokia suite on PC.
3. Click on Maps icon.
4. Select the Regions such as America/Europe/India.
5. Click on the country which maps data is required.
6. Click on download. Wait until maps data is downloaded on device.
Kindly let me know if you require any further information or help.
Thanks & Regards,
Sujith Varghese
Nokia Care Representative
India
NOKIA Support Services:
1. Find the nearest Nokia Care Centre: Type “NCC<space>City Name” and send it to 55555* (e.g. NCC DELHI).
2. To book an Appointment with Nokia Care Centre, visit http://www.nokia.co.in/appointment
3. Online Support: http://www.nokia.co.in/support
4. Protect your Nokia Device -Buy Nokia Extended Warranty by visiting the nearest Nokia Care Centre.
5. Warranty Terms & Conditions: http://www.nokia.com/in-en/support/manufacturer-s-limited-warranty/
*Premium SMS charges apply -
PLZ HELP.. How can i make dvd from FCP project..
Can someone plz help..
I have FCPPRHD and DVD Pro..
I got lost trying to make a dvd out of fcp project
Can someone plz help in easy 123.. steps how to make a dvd for my client to view..
Thnx ever so much
awaitng ur replyI don't want to sound too harsh, but you really need to read the manual and do the tutorials.
You shoot, capture and edit in FCP. You export that to MPEG2 using compressor and you import the resulting video and audio files into DVDSP. You add a menu and set up buttons to get to the footage, and you set up navigation so that your client can get back to the menu at any time. You build and format that (i.e. burn the disc).
That's the process, but it is very much more detailed than any of us could write here.... it's all in the manual and tutorials
Maybe you are looking for
-
Dynamically sizing a group of textfields based on font size
Hi, I have made a UI control which contains a bunch of TextFields representing the members of an Array. I draw these un a list like in a combo box's drop down. Currently I hard code the height of the TextFields, iterate through the Array and position
-
IDOC_OUTPUT_ORDRSP - Multiple Issue Output
Hi All, I have problem issuing multiple output for a Sales order Confirmation. BA00 is configured as: 1> I have assigned reqmnt 2 to the output BA00 2> Multiple Issue flag is checked 3> In Change Section, I have assigned FORM ZZ_ITEM_CHECK for progra
-
Sap B1WS - Unable to authenticate on the license server!
Hello, I've installed and configured b1ws according to the help file provided. after creating a virtual directory in the IIS to the sample directory provided with the installation I receive the B1 Webservices login page but cannot login with the usua
-
Hi Guru, We are running report in t-code:S_ALR_87012251, but last two onward we are not able to see the Expand and Collape tab option and Hierarchy option also, and the report format also got changed but the user want as per the previous format and w
-
Urgent!!!! Connect Timeout For OleDB (OraOLEDB.Oracle)
Hi, I'm trying to connect oralce db 8ix from asp.net (vb.net) with connection string as "Provider=OraOLEDB.Oracle; Oledb.Net=true; PLSQLRSet=true; User ID=xxx; Password=xxx;PwdChgDlg = 1;" But, when I try to connect using EXPIRED user, my connection.