Plz help me in finding out the BADI or menu exit for IW32
HI
in Tcode IW32, based on the user status(ASTTX), the menu items ,EXTRAS -> TASK LIST SELECTION -> all items have to be grayed out.
Please help me to find out BADI or menu exit which ever is available.
Thanks,
Pallavi.
Hi,
Please check if the below user exit/BADI is useful.
Enhancement
IWO10012 Maintenance order: Priority handling on central header
BAdi
IWO_UI_USEFLEX BAdI for Calling Up an Alternative UI
Regards,
Srini.
Similar Messages
-
Hi plz help me to find out the table name and field names as i am unable to find .....In the spec am given requirements in the following pattern.
Description SAP-Term Explaination
1.Salesman Equipment AC Mgr. VBPA2 this is the salesman code - I need the
description for this.
2.Vendor MEPO_TOPLINE-SUPERFIELD Vendor field is pull from me23n where the
condition will be that COBL-KDAUF (this is a
structure from me23n in item data-account
assignment-sales order. The number here should
be the corresponding contract number. This field
should include a multiple selection function. User
can put more than one description to search for.
3. Val. Period Val. Period Category Val. Period Category from va41 header-contract
Category data. This field should include a multiple selection
function. User can put more than one description
to search for.
4. Service Order/ CAUFVD-GSTRP/ This should be the document date where by it is in
Purchase Order MEPO_TOPLINE-BEDAT between the range the user input
Document Date
5. B2B Vendor MEPO_TOPLINE-SUPERFIELD Vendor field is pull from me23n where the condition
will be that COBL-KDAUF (this is a structure from
me23n in item data-account assignment-sales
order. The number here should be the
corresponding contract number.
6. B2B Cost MEPO1211-NETPR This cost is pulled from PO (me23n) however take
note that the price will be pulled out base on line
item Net Price. Make sure that price is taken
corresponding only to the equipment tied to it.
Check on Number 7 to see how is the line item tied
to the equipment.
If this is in other currency please make it to SGD
with the exchange rate field Exchange rate
(MEPO1226-WKURS)
NOTE:: I need to know the table from which I can
determine the currency type as can be seen in the
ME23N transaction and also te exchange rate for
that particular currency.
7. No of faults The service order (CAUFVD-AUFNR) created base
on the equipment in Number 8. This should exclude
the service order of type RD08. Service order can be
access by IW33.
8. Faults Completed This would be the number of faults (Number 13)
which has a system status (CAUFVD-STTXT) of
TECO. System status can be viewed in IW33 Sys.
Status. Take note service order type RD08 will be
excluded
9. Time Spent on Fault AFVGD-ISMNW This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults
Completed (Number 14). This means only orders
with system status TECO will be pull. Take not
service order type RD08 will be excluded
10. Fault Cost RIHAUFK_LIST- DGESKOSIST This will be the total cost for a service order which
have the status TECO. Those which are not TECO
will not be needed. This field can be obtain from
IW39 (standard report). Execute the report and
there will be a field for Total Actual Cost. You might
need to change the screen layout to be able to view
this. Take note service order type RD08 will be
excluded
11. PM Hours AFVGD-ISMNW This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults Completed
This means only orders with system
status TECO will be pull. Take note service only
take order type RD08.
12. Spare Cost Spare part cost This field will be in IW33 under cost tab, and cost
PMCOEA-IKOSTENKGR tab in item level. This will be the actual cost of spare
part after TECO. This will include all order type.
13. Credit Note Credit Memo The programs need to pull out credit memo which is
reference from the contract. If there is a credit memo
reference from the contract then the value will be net
price per equipment.Can u tell me purpose of this spec ?
Regards,
pandu. -
i could not find network utility option in mavericks. i was using os x lion.there is a network utility option in utility menu.help me to find out the option in mavericks.
Choose Go to Folder from the Finder's Go menu, provide /System/Library/CoreServices/Applications/ as the path, and open it.
(109612) -
Can anybody please help me to find out the link where small co.
can anybody please help me to find out the link where small companies implementing saps.
Hi,
SAP is providing a solution to Small Scale Industries with SMB (Small and Midsize Business) Product for various industries. It's a Pre configured SAP Solution pertaining to a specific industry(like Pharma, Oil..etc) with which the implementation as well as the cost will also decreases.
Regards,
Jayaram... -
How to find out the list of field exists for a particular transaction
Hi all,
Can u please help me find out the list of field exits available for a particular Tcode?
Is it similar to User exit or . . . . ?
Thanks,
C.Selvaraj
SAP-QMCreate a program and add this code to find user exit
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ', "#EC NOTEXT
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name', "#EC NOTEXT
21 sy-vline ,
22 'Description', "#EC NOTEXT
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill. "#EC NOTEXT
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'. "#EC NOTEXT
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'. "#EC NOTEXT
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Rewards if useful........................
Minal -
How to find out the plants and storage location for a given company code
hi
How to find out the plants and storage location for a given company codeHi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore -
How can we find out the disk which is used for a mount point
How can we find out the disk which is used for a mount point?
one of our mount point(/u03/oracle/prod) was using high I/O and this was causing slowness in the server.
I can see a disk operation error in errpt at the same time as below. Wanted to check whether the mount point /u03/oracle/prod is using the disk hdisk31
$errpt|more
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
DXB78877 1125032114 T H hdisk31 DISK OPERATION ERROR
OS version:AIX 6.1
DB:11.2.0.2this is the output for cat /etc/filesystem
/u02:
dev = /dev/fslv00
vfs = jfs2
log = /dev/loglv00
mount = true
options = rw
account = false
/u01:
dev = /dev/fslv01
vfs = jfs2
log = /dev/loglv00
mount = true
options = rw
account = false -
Please help me to find out the solution..​.plz
question-"fourier series coefficents of a square wave using gibbs phenominon"
i have tried this problem so many times to find the solution but i can not find find it.it shows a data type problem.
plz help me sir to draw the circuit properly...plz
i am sending my program to you...plz check it and give me some suggestions..i am very thankful to you.
Attachments:
try_fourier1.vi 847 KBHi
The Templates are in this path
For OCDT the path is C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\Administration\Setup\Banking\Credit Card Payment
For sample template ODSC it is in C:\Program Files\SAP\Data Transfer Workbench\Templates\Samples\1. Add New Data\Administration\Setup\Banking\Banks
like the way u can see all the set up banking templates in this path
C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\Administration\Setup\Banking
Regards,
Sudhir B.
Edited by: B.sudhir on Dec 13, 2011 11:13 AM -
Help me to find out the font type?
Is it possible to find out the type of the used fonts(like Open type (or) true type) in illustrator cs3 file through programmatically. Kindly share with me the possibilities and solution.
Thanks...Good evening,
an idea to help you in your approach
Sub texte()
Set appref = CreateObject("Illustrator.Application.cs4")
Set myDoc = appref.ActiveDocument
Set myText = myDoc.TextFrames
For i = 1 To myText.Count
MsgBox (myText(i).Characters(1).CharacterAttributes.TextFont.Family)
Next
End Sub
Patrice -
How to find out the cost of SAP user for a particular user id
Dear All,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
RaghuHello Raghu,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
I think you need to reach out to BASIS consultant to check out the Cost involved for User ID for the SAP application.
Regards,
Sarthak -
How to find out the aligning Data dictionary table for a structure.
Hi
As the table controls are associated with strucures, the data input goes to the data dictionary table aligned to that structure. Is there any way we can find out the table related to that particular structure ?
Thanks,
DhareppaHi,
The structure and its fields may be associated with multiple database tables.
You can try by where-used list of the structure/field and then you can look and determine the table by hit and try method.
Also as suggested above you can try get the SQL trace and then ypu can look for table associated behind the structure/fields I believe this is the best way to find the DB table.
Thanks,
Ravi -
How to find out query name in customer exit for variables
We use the same customer exit variable in different queries. In the customer exit we want to find out, which query has called the customer exit. With the technical query name we want to read a master data table entry.
e.g. If we come from query ZG1_TEST1 we want to use selection sel1
Query name | selection
ZG1_TEST1 | sel1
ZG1_TEST2 | sel2
How can we find out the query name in the customer exit for variables?
Thanks for your help,
EviHi Evi,
check out the structure I_S_RKB1D in your exit. It contains the query.
Siggi -
Help me to find out the brushes information?
Is it possible to find out wheather the "textframe" and "stroke" contains the "Brushed object" or not in "illustrator cs" through javascript or vbscript. Please help me.
Anybody please!
-
Urgent help me to find out the error
hi ppl,
i have installed jre-1_5_0_04-windows-i586-p-iftw . but i am not able to compile any java program. when i try to compile javaw it is generating an error " could not find the main class : program will exit ".
pls help me to figure out what went wrong.
pls i need a reply soon.
sweetyThe JRE doesn't include a compiler. You need the SDK.
javaw is used to run Java applications, not to compile them. -
Help required in finding out the tables for FS-Claims Management module
Hi All,
In FS - claims Management module, i need to find out from which tables we can fetch the following fields,
INSURED : insured person
DESCINSURED : Description of insured person
CLAIMANT : person eligible for benefits
DESCCLAIMANT : Description of insured claimant
OUTSTRES : Outstanding reserve
PAID : paid amount
INCURRED : paid amount + outstanding reserve LOSSDESC : loss description
Thanks & Regards,
AnilHi Anil,
I was searching for the fields you mentioned using SE15 and came up with lot of hits. I thought, it would be good if you do the same thing and you can find the relevant tables as might you have good idea in this area.
I will tell you the procedure and I hope it will give you good results.
1) Go to SE15 (Repository Info System)
2) Click on "ABAP Dictionary"
3) Click on "Fields"
4) Select "Table Fields" and enter description as "insured" on the right hand side panel with Application component as "FS"
5) Click "Execute" (F8) and you will lot of hits.
You need to search through it to find relevant tables for your purpose.
Hope this will give you an idea.
Regards,
Vicky
PS: Award points if helpful
Maybe you are looking for
-
How to make more than one tab on safari
How do you have more than one tab on sarfari?
-
How to track changes in Customer master
Hi , in VD03 for a Customer, when looked for changes made. Enviornment -> Account changes -> All fields. and then selected All changes, it shows me number of entries, in New column it says deleted, I am wondering about why this happened and wanted to
-
How can i use multilist box in
How can i use multilist box in order to fetch parameters from user ex selection-screen begin of block blk1. parameter : s_maktx like makt-maktx, p_maktx(18), s_werks like mard-werks, s_lgort like mard-lgort
-
since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podc
-
How to copy a page to another document?
In earlier versions of Acrobat Professional I could copy pages from one PDF to another simply by dragging over the thumbnail of the page to the other document's thumbnails.... Couldn't have been easier! I'm now using Acrobat 8 Professional and the th