How to find out query name in customer exit for variables

We use the same customer exit variable in different queries. In the customer exit we want to find out, which query has called the customer exit. With the technical query name we want to read a master data table entry.
e.g. If we come from query ZG1_TEST1 we want to use selection sel1
Query name  |  selection
ZG1_TEST1   |  sel1
ZG1_TEST2   |  sel2  
How can we find out the query name in the customer exit for variables?
Thanks for your help,
Evi

Hi Evi,
check out the structure I_S_RKB1D in your exit. It contains the query.
Siggi

Similar Messages

  • How to find out query name using Elements of the query builder.

    Hi SDNers,
    how to find out query name using Elements of the query .
    thanks,
    satyaa

    Hi,
    For having a look at the relation between BEx tables,check the link below:
    http://wiki.sdn.sap.com/wiki/display/BI/ExploretherelationbetweenBEx+Tables
    -Vikram

  • How to  find out  Query name if i have Program generated by Query

    Hi Gurus,
    Can you please let me know the Query Name if i have the Program name.
    The program name is : AQTQP2P=========INVENTORY_SUM=
    I thought P2P is the user group and either "INVENTORY_SUM"  or  "AQTQP2P"  is the
    Query name but both doesn't exists in the system.
    Is there any way to get the correct Query name and User Group from the Program name.
    I have an FM : RSAQ_DECODE_REPORT_NAME  to get Query name and User group name
    but the reults given by them are P2P as user group and  "INVENTORY_SUM"  as Query name.
    I did not find any one of them in SQ01.
    Can you please help me out.
    Thanks,
    Vinay.

    Hi ,
    Thank for the information.
    In have both the Function modules.
    1. To get Query name from report name
    2. To get Report name from Query name
    I did all that stuff, still i did not find the User group or alteast some where near to it..
    there is no User Group that starts with letter P.
    But The report name is there
    i could execute it in both foreground and in background and able to get the Output as well.
    May be it is deleted from Development system.
    I do not have auth in QA and in PRD to check it.
    Can you please let me know
    By any chance the Query can get deleted and the corresponding program exists for that Query and
    we can work with the report even if the Query is deleted.
    Any ways i am goind to give you points (Vinod/Atish) for your help.
    Thanks,
    Vinay,

  • How to find out server name in reports9i

    hi all
    how to find out server name in reports9i
    i need the report server name to call a report
    thanks
    Edited by: vikas singhal on Nov 5, 2008 1:02 AM

    You do not need to do anything, if your Report server is on the same machine as the Forms server (which is usually the case) you simply use the url as
    /reports/rwservlet?report=myreport' and the server will automatically use the default report server.
    then you simply use
    web.show_document('/reports/rwservlet?userid=scott/tiger@orcl&report=myreport&desformat=htmlcss&desname=test.html'Tony
    Try it now
    Edited by: Tony Garabedian on Nov 5, 2008 2:00 PM

  • How to find the query name using infoset name

    Hi Experts
           Iam new to the sap queries(SQ01,SQ02), some queries already created.
          now i want to do some modification, my problem is i am not able to find the query name.
          I know the infoset name, can you tell me how to find the query name using the infoset name, is ther any table for this.
    i tried in sq01 also, but its confusion, pls advice me on this.
    thanks in advance.
    regards
    rajaram

    Hi
    try like this..
    SQ02 --> go to --> Query Directory..
    from there you can get all the queries belong to a Infoset.

  • How to find out Db name of perticular web application in sharepoint 2010

    how to find out Db name of perticular web application in sharepoint 2010 to take a backup from sql

    1.  Open the SharePoint 2010 Central Admin application.
    2.  On the SharePoint central administration website, click Application Management.
    3.  In the Databases section, click Manage Content Databases.
    4.  On the Manage Content Databases page, select a web application by clicking the Web Applications drop-down list and choosing a web application.
    5.  Can notice the  available database names for the webapplication. ******************************************************************************************
    Please remember to mark your question as answered &Vote helpful, if this solves/helps your problem
    s p kumar

  • How to find bex query name of which dashboard built on?

    How to find bex query name of which dashboard built on?

    Hello,
    When you add a "SAP BW Connection" to you dashboard, you find in the output parameters the query technical name and the query description. you can bind it to the embedded spreedsheet and then use it in yoyr dashboard
    Best regards,
    Mohamed AISSA

  • How to find out what is the lock key for the computer

    How to find out what is the lock key for the computer?

    You don't.
    If you forgot or lost the password, all you can practically do is reset it.
    The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
    On Lion, you use the following technique to reset the Administrators password:
    Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
    Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
    In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

  • How to find out the plants and storage location for a given company code

    hi
    How to find out the plants and storage location for a given company code

    Hi
    Check for Assignem,ent of Plant & compnay code in OX18
    & for Combination of Plant & Storage location in OX09
    The total org structure can be viewed in EC01 - Click on Structure  -> navigation
    & Continue, Click on the Compnay code & the wole structure can be viewed
    Thanks & Regards
    Kishore

  • How to find out exact labour hour and expenses for each labour attached to

    Team,
    How to find out exact labour hour and expenses for each labour attached to machine
    We are planning to go with CATS.
    But in Cats how Production Planning department get the exact labour coust
    (which includes labour accomodation building , EB etc. paying by comp)
    How to do this in CATS
    REX

    hai
    generally  the schemas are named X000  which stands for common schema  nomination
    x replaced by respective country like for india it is IN00  for US  U000etc
    it is not given according to the group of emplyees but according to the country grouping for your org units
    time schemas are country independent they work for all the countries
    regards
    nalla

  • How to find a query name from report name

    I have a report in my system with the name AQICMM==========P2============ . I believe this was created from a query. How to find the query corresponding to this report ? I need to change the logic for certain columns of the report. How to know if this was created from SQVI or SQ01 or any other transaction.
    THanks.

    Found it..Query name is P2. It was in a different query area..Standard area and not custom area where I was initially looking at.
    Edited by: Shareen Hegde on Aug 22, 2008 5:14 PM

  • How to find out Query last used by whom

    Dear All,
    Can any one tell me that "How to find out the Query last used by whom. I have already searched in SDN but no luck. In my system BW Stats are not installed and I have already checked the below tables.
    RSZELTDIR  - Directory of the reporting component elements
    RSZELTTXT  - Texts of reporting component elements 
    RSZELTXREF  - Directory of query element references 
    RSRREPDIR -  Directory of all reports (Query GENUNIID) 
    RSZCOMPDIR -  Directory of reporting components 
    RSZRANGE  - Selection specification for an element 
    RSZSELECT -  Selection properties of an element
    RSZELTDIR - Directory of the reporting component elements 
    RSZCOMPIC -  Assignment reuseable component <-> InfoCube
    RSZELTPRIO -  Priorities with element collisions
    RSZELTPROP - Element properties (settings)
    RSZELTATTR - Attribute selection per dimension element 
    RSZCALC - Definition of a formula element 
    RSZCEL - Query Designer: Directory of Cells
    RSZGLOBV -  Global Variables in Reporting
    RSZCHANGES  Change history of reporting components 
    I am able to find out the Date and time but not the user name.  So could you please help on this.
    Regards
    Sankar

    i think u have missed it.
    RSZCOMPDIR IS THE ONLY TABLE WHICH PROVIDES THE DATA.
    ENTER TECHNICAL QUERY Name in RSZCOMPDIR-COMPID.
    RSZCOMPDIR-TSTNAM gives you the user id of sap bw user who made the change.
    RSZCOMPDIR-TSTPDAT gives you date on which  change was made .
    RSZCOMPDIR-TSTPTIM   gives you timestamp on which  change was made .
    all users details can be obtained from TCODE SU01 where you need to enter sap user id.
    You can also get user name( description) by using tcode SE09 and entering above sap user id.

  • How to find out the name of a table?

    Hi
    How can I find out the name of a table which doesn't have a record history?
    Regards
    Rahman

    No direct way to know the tables. What you will find on the ABout this page link are the View Object (similar to record sets), Entity objects, controller and Application module. Generally EO is based on a table or the VO can be based on the query which you can find the corresponding xml file. But a button action might be calling a method in AM or CO which in turn call some wrapper method to interact with database. So nothing straight forward. You will have to analyze the all page related code objects.
    They are specific to OA framework and if you are not aware about them, better go through the initial chapters of OAF dev guide.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to find out table name for the field in the webUI

    Hi.
    I am in CRM2007.
    So i go to the transaction code    BSP_WD_CMPWB
    In that i provide the component name as CRM_UI_FRAME.
    I press the Test button.
    So, it opend the WebUI.
    I want how to find out table of the particular input field?
    I mean from which table the data is retrived how to find out?
    When i enter some thing in the input field how to find out in which table that data is stored?
    By pressing F2 on the input field it opend View and Component Name.
    I want find out table of that particular field. How to find it?
    If anybody know about this explain it with Screen shorts if possible.
    Thank You.
    Krishna. B.

    hi
    goto tx genil_model_browser. Suppose you want to find fields reated to your order header eg sold to name. In component set write all and press F8. Then goto access object and in access object click on node BTAdminH. Click on attribute structure. Here you will find structure and attributes. If you click relationship then you will see all the relationship wrt btadminh. open any r/s that you require. and click on other object and attribute. You will get to know the structure.
    Best regards
    Pankaj kumar

  • How to find out program name to the corresponding output type of invoice..

    hi ALL,
    I want to findout program name to my output type.
    For one invoice functional peoples are configured. Here i know the outtype. But i don't know the program name .
    Can any body please tell me how to find out the program name for the output type..?

    Hi,
    Goto NACE t-code
    Select Billing (V3)
    Press 'Output Types' Button
    In the next screen select the corresponding output type you want.
    Then press 'Processing Routines' in the left pane. You can see the program name
    Cheers,
    Kothand

Maybe you are looking for