Po ammendment fields.

hi everybody's...
i want to depict the old effective date , price and new effective date for the particular material in alv. but i dont know where and whats the field name and table name for these above. this is po ammendment problem..
plz rectify this and where it is available...
regards
surender...

Hi,
If you want table name and field names of changes then refer following;
You have to develop a report for this using tables CDPOS and CDHDR
Use following tables;
CDHDR - Change document header
CDPOS - Change document items
Go to SE11 / SE16 / SE16N, here enter Object value as "PO No" in Table CDHDR and get the Document No and then input this in CDPOS and get the changes details. You can also enter EKKO and EKPO tables and see the whole list.
Refer link;
[Change SAP documents -- tables CDHDR and CDPOS|http://www.sap123.com/showthread.php?t=47]

Similar Messages

Cisco Jabber for Mac - Directory Lookup and Contact Fields

Hello,
After having issues myself with Cisco Jabber for Mac 9.2 specifically with Active Directory lookups not working, or contact information not populating (and therefore not being able to call users from the contact list as no telephone information exists) I am including a sample jabber-config.xml file that works for me.
Please note: there are many different ways to configure this. What I will be showing is the method that works for me and my deployment, which is pretty standard.
As always and as a disclaimer, once again, this is what has worked for my deployment scenario. Always keep backups of your configuration files, and always be mindful of anything you have configured already, especially in the jabber-config.xml file.
Background
My deployment is based on CUCM 9, with 1 publisher and 2 subscribers. I also have a CUCM IM & Presence 9.0 server. This assumes that you have already configured your deployment and Jabber is functioning already, albeit with the aforementioned issues.
As for Active Directory, my deployment will be based on Windows 2008 R2 Domain Controllers running in native 2008 mode. For this example, we will be searching directly against one of the DCs with a Global Catalogue role. Please be aware that in large deployments you will have to plan accordingly with regards to lookup traffic from Jabber clients to the DCs.
Also, as of Cisco Jabber for Mac 9, the client no longer can search via the CUCM internal directory (which may be made of local end users, Active Directory synced users, or a mix of both) and this must be done via a LDAP mechanism.
Scenario
In this deployment scenario, Cisco Jabber for Windows is working properly - you can search and add people from Active Directory, and contacts in your contact list have all the appropriate fields populated from Active Directory. However, when trying the same with Jabber for Mac, Jabber for iPhone or Jabber for iPad you notice that you cannot perform a directory lookup, and if you add people directly (for example, [email protected]) the user only has the IM field populated. No telephone, email or additional information is displayed.
Solution
Whereas Cisco Jabber for Windows uses the EDI mechanism (native Windows), whereby when running from a computer that is on the domain (or in the event that you are search for contacts in another Active Directory domain where a domain trust exists) , Jabber for Mac / iPhone / iPad uses the BDI mechanism.
In this case, you will need to provision a jabber-config.xml file that you will upload to your TFTP server (or Publisher) that will be "downloaded" by your Jabber for Mac client and also used by the iPhone and iPad client. You can configure many options in the jabber-config.xml file, but for this example we will place just the information that we need to order for these clients to request and display Active Directory information.
Please note that the configuration may vary depending on your deployment, but at the very least we will be:
- Configuring a DC where we will perform the lookup.
- Configure credentials that will be used to perform the lookup. This will be an Active Directory account that has read rights on the Active Directory domain. Please note that these credentials are saved in plain text in the file, so ensure that the account that you will be using is not privileged.
- Configure the server port that we will be using to perform the lookup.
- Configure the Search Base. This is basically where we want the directory lookup to happen. You can either choose for this lookup to start at the "base" of the domain (and therefore the search will iterate through all the user accounts and and OUs below the root base) or define a specific OU where you want to search.
Caution!
- There is a current limitation with Cisco Jabber for Mac whereby you can only have 1 search base configured. Please keep this in mind if, like me, you have multiple OUs (like an OU for each company in your organization) and under these OUs you have sub OUs as a user account container.
- If using the top level search base, unless you specify a filter, you will potentially be able to search for all user accounts in the domain. You will need to configure the <BDIBaseFilter> parameter if you want to fine tune your search ability.
Steps
These are the steps I have followed. Other steps or considerations may vary.
- Log in to your TFTP server and download the jabber-config.xml file and keep it as a backup. If you are already using the jabber-config.xml file for other purposes, do not worry - you can add your BDI information parameters inside.
- Remove the jabber-config.xml file
- Edit the jabber-config.xml file and configure thus:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
    <Directory>
        <DirectoryServerType>BDI</DirectoryServerType>
        <BDILDAPServerType>AD</BDILDAPServerType>
        <BDIPrimaryServerName>DOMAIN CONTROLLER IP ADDRESS</BDIPrimaryServerName>
        <BDIPresenceDomain>YOUR PRESENCE DOMAIN</BDIPresenceDomain>
        <BDIServerPort1>3268</BDIServerPort1>
        <BDISearchBase1>YOUR SEARCH BASE</BDISearchBase1>
       <BDIConnectionUsername>[email protected]</BDIConnectionUsername>
        <BDIConnectionPassword>PASSWORD</BDIConnectionPassword>
        <BDIEnableTLS>0</BDIEnableTLS>
   </Directory>
</config>
For example, let´s assume the following:
- Domain controller IP address is 10.1.1.2 .
- Your presence domain is test.local .
- Your search base will be test.local using the top level of the domain.
- Your username with which you will be doing your searches is called walt . Usually you can either identify walt as test.local\walt or [email protected] . It is always best, in these sort of scenarios, to use the UPN convention so we will be configuring a [email protected] .
- The password is the Active Directory password for the account walt .
- I have disabled TLS in my case. There are issues with the Jabber for Mac client when using other security methods.
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
    <Directory>
        <DirectoryServerType>BDI</DirectoryServerType>
        <BDILDAPServerType>AD</BDILDAPServerType>
        <BDIPrimaryServerName>10.1.1.2</BDIPrimaryServerName>
        <BDIPresenceDomain>test.local</BDIPresenceDomain>
        <BDIServerPort1>3268</BDIServerPort1>
        <BDISearchBase1>DC=test,DC=local</BDISearchBase1>
       <BDIConnectionUsername>[email protected]</BDIConnectionUsername>
        <BDIConnectionPassword>walt01!</BDIConnectionPassword>
        <BDIEnableTLS>0</BDIEnableTLS>
   </Directory>
</config>
One you have configured the jabber-config.xml file, you will now need to upload it to you TFTP server. Once uploaded, you will need to restart the Cisco TFTP service. Again, my TFTP server is on my CUCM publisher, so:
- I go to Cisco Unified OS Administration on my Publisher server, TFTP File Management and I upload jabber-config.xml to / directory
- I then go to Cisco Unified Serviceability on my Publisher server, I locate the Cisco TFTP service and I restart the service
Once this is done, you can figure up your Jabber for Mac client. As a test, on your Mac (using Terminal) go to:
/Users/username/Library/Application Support/Cisco/Unified Communications/Jabber/Config
In here you will see several files, but what we want to see is jabber-config.xml . As soon as you start the Jabber for Mac client and log in, the jabber-config.xml file will download from your TFTP server and get saved here. When you see it appear, just type in your terminal window more jabber-config.xml and make sure that the output is the same as the xml file you created.
From there, try doing directory search. If you have previously added contacts and they still lack attribute information, you will need to remove them (sometimes it will not refresh properly) and add them again from the directory.
I will be updating this guide and ammending anything that is incorrect, but this is meant to be a quick checklist and steps to get this, at least in the most very basic version, up and running for Jabber for Mac.

Hello,
Thanks for this post! It works, I can do lookup and also I can add found contact to contact list and get information about contact from LDAP.
One more question: - I can't get all information about contact. I don't get e.c mobile phone number and more others attributes. I have tried to expand your file as follows:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>AD</BDILDAPServerType>
<BDIPrimaryServerName>IP of AD</BDIPrimaryServerName>
<BDIPresenceDomain>Presence Domain</BDIPresenceDomain>
<BDIServerPort1>3268</BDIServerPort1>
<BDISearchBase1> Search Base</BDISearchBase1>
<BDIConnectionUsername>User</BDIConnectionUsername>
<BDIConnectionPassword>Password</BDIConnectionPassword>
<BDIEnableTLS>0</BDIEnableTLS>
       <BDISipUri>msRTCSIP-PrimaryUserAddress</BDISipUri>
       <BDIPhotoSource>thumbnailPhoto</BDIPhotoSource>
       <BDIBusinessPhone>telephoneNumber</BDIBusinessPhone>
       <BDIMobilePhone>mobile</BDIMobilePhone>
       <BDIHomePhone>homePhone</BDIHomePhone>
       <BDIOtherPhone>otherTelephone</BDIOtherPhone>
       <BDITitle>title</BDITitle>
       <BDICompanyName>company</BDICompanyName>
<BDILocation>co</BDILocation>
<BDIPostalCode>postalCode</BDIPostalCode>
       <BDICity>l</BDICity>
       <BDIState>st</BDIState>
       <BDIStreetAddress>streetAddress</BDIStreetAddress>
</Directory>
</config>
But it didn't help.
When I capture lookup via Wireshark, I can see that Jabbers sends search request with bunch of attributes, but from LDAP answer contains only 8 attributes. (see attached screenshots)

PO Ammendment and version number

Dear Experts,
We have version management active at out client.
When we save the PO after changes version number is generated and changes are saved against that version number.
We want the report where we can see the Ammendment details in the PO , that is changes thet were made in that particular PO.
What are the tables and which are the fields where we can find these details.
Is there any standard report available where i can see those changes in PO.
Pl. guide.
Best Regards,
Vikram

Hi
I dont think standard report is there to show versions created in purchase orders.
You can use the table EREV, doc type F which shows version numbers with status active or completed..
Thanks

How to assign fields in rdf in coldfusion

Hi,
This is chitti iam facing problem in cold fusion with rdf?
How to assign dublincore field to rdf file in xml? iam trying
this is this the correct way or not?
iam posting image with metadata into database

Hi
Go to acessseqence and then select the particular table which u have added or ammended select the table and click feilds tab and after u go in to feilds select each feild and press enter and save do this for evry line in each field and after completing
evry feild save and exit ....ur problem will be solved otherwise
AccessSequence -> select table -> click on fields -> select the field with error and click on field catalog .
From there select the field name manually and save .
and please refer this link..
Access sequence Issue
Hope it will be help-full for you
Thanks..

MM:Printing of Purchase Order Ammendment

Dear Gurus,
Plz tell me the configuration setting for Printing the PO ammendment,
Rgds,
Vinay Parne

Hello,
Pls check in Po messages that Change indicatior ( tick ) is activated so that Po print can be taken with ammendments.
If change indicator diesent appear then check,
SPRO>MM>Purchasing>Messages>Output Control>Check meassge determination schema & field relevant for print out of changes
In case of any querriers pls let me know.
Reagrds,
Abhijit

Ammendment of P O

Change in raw material P O, If quantity or price is reduced than existing ones,
P O does not go for release.
Even Ammendments are not registered , which should cancel earlier value and in corporate new one
Kindly guide how to make it active in release strategy.
How the ammendment no. will appear on P O.
Regards,
R N Ganapule

Hello Raghunath,
If there is any change in purchasing document (Contract / Scheduling Agreement / Purchase order) it should trigger for new approval.
Incase, this is your requirement then you can achieve this by using the appropriate Release Indicator value "Changability) during defining release procedure. For release indicator you have several options as follow:
The Changeability indicator shows the effect of changes to the contract (a change to a contract may require a new release strategy to be determined, for instance).
By means of the Value change indicator, you can specify that the release strategy is to be re-started if a contract is changed and the value of a contract item thereby increases by a certain percentage (e.g. 10%). Set the Changeability indicator to "4 - Changeable, new release in case of new strategy or value change" or
"6 - Changeable, new release in case of new strategy or value change/outputted" and enter a percentage in the Value change field.
Hope this helps.
Regards,
Arif Mansuri
Reward if answer is helpful.

ALE: Org unit name not in first field

Hi All,
We are maintaining our CRM org structure from R/3 and are getting close to implementing our system and have come accross a problem.
When the BP is created (in CRM) for the Org units it puts the code of the org unit in the first line of the 'Name' field and then the description on the second line..
The problem with this is when you select the BP through the Web IC it just displays the code, which is no good to the call centre staff as it is (to them) meaningless.
I have been through our config and can't find where this information is mapped to the BP.
Any help greatly appreciated and points rewarded as always..
Cheers
Gaz

Hi All,
The only way this seems to be possible is to ammend the data through a BADI...
I have implemented the PARTNER_UPDATE BADI and done a call to 'BUPA_GENERAL_CALLBACK' to get the information I need and then 'BUP_MEMORY_BUT000_FILL' to update the information.
The problem is that this information isn't being populated back to the BP itself (no changed from the BADI code).
You cannot do a COMMIT WORK as it causes an error..
Is there another FM that will save the changed values ???
Many Thanks in advance
Gaz

How to assign fields to access sequence

Hi expert
i have assigned condition table to access sequence but it contains nothinng.its not showing the fields available in the table
can someone help me how to add these fields in acess sequence i was able to add condiion table in access sequence but it does't show any fields.
thanks

Hi
Go to acessseqence and then select the particular table which u have added or ammended select the table and click feilds tab and after u go in to feilds select each feild and press enter and save do this for evry line in each field and after completing
evry feild save and exit ....ur problem will be solved otherwise
AccessSequence -> select table -> click on fields -> select the field with error and click on field catalog .
From there select the field name manually and save .
and please refer this link..
Access sequence Issue
Hope it will be help-full for you
Thanks..

Fields in DSO & Cube

Hi experts,
I have the field 0fiscyear in my dso and also in the cube. But
when creating transformation the field 0fiscyear is present in
the dso but not in the cube. So that i am unable to create
transformation for 0fiscyear.Anyone please explain me what
should i do to make the field visible in the cube.
And one more question. How can we select or hide the fields
of 0fi_ar_3.This data source is not visible in LBWE.
Full points will be assigned.
Thanks & Regards,
V N.

Hi VN,
Goto SBIW->Application Specific>Logistics>manage extract struvctures>initialization->appl specific setup of statistical dat -->select inventory mangement perform setup>
in the select materil movement/Setup: Invoice Verification, Revaluation as per your choice to load.
direct transaction OLI1BW for material movement
OLIZBW for invoice verification
once you gets into statistical setup give name of the run and termination time and date to setup then gofor excution
once setup tables start loading gotoRSA3 which is extrac chekor to chk u r datasource data
before all this make sure your data source as active.
i hope this is clear na
mahesh
Edited by: Mahesh Kumar on May 19, 2008 7:00 AM
Edited by: Mahesh Kumar on May 19, 2008 7:01 AM

Fields in Creation of free goods VBN1

hi everybody,
Can somebody expalin in detail the fields in creation of free goods(T-vbn1) like free goods quantity,additional quantity,documnet quantity and calculation rule....
<b>Please dont copy paste anything form SAP help....I read that one......</b>
I would appreciate if u explain with your sentence..
Will reward point if it helps.
Ghassan

Hi Gafoor,
Material
Material, for which free goods is to be
granted
Minimum quantity
Minimum quantity for which free
goods can be granted
From
Quantity of sales material
FGQ--- Quantity unit of free goods material
Free goods -- Quantity of free goods with reference to the quantity and quantity unit of the sales material.
AQU - Quantity unit of the free goods additional quantity
Rule - Calculation rule
Prorata
whole units
unit related
D -- Delivery controlling - it tells how you can manage the delivery of free goods with respect to the main item ordered.
Additional material - Additional material (only available for entry in exclusive free goods)
Hope it helps. Please reward if helpful.
Thanks & Regards
Sadhu Kishore

Open Field in ALV Report

Hi all,
i have to develop a ALV report.
In that report i have to put a open quantity column , so that the user can enter values in that, and that value should get updated in the database.
So please suggest me how to develop such report with open field.
Thanks in advance,
Regards,
Pawan

Hi,
Try executing the below code
REPORT YMS_EDITBLOCKALV.
TABLES : rmmg1,MCHB, mkpf.
DATA: BEGIN OF t_mseg OCCURS 0,
zeile LIKE mseg-zeile,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
matnr LIKE mseg-matnr,
werks LIKE mseg-werks,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
END OF t_mseg.
DATA:BEGIN OF t_mchb OCCURS 0.
INCLUDE STRUCTURE mchb.
data flag type c.
matnr LIKE mchb-matnr,
charg LIKE mchb-charg,
werks LIKE mchb-werks,
clabs LIKE mchb-clabs,
DATA END OF t_mchb.
TYPE-POOLS slis.
data: progname like sy-repid,
fieldcattab TYPE slis_t_fieldcat_alv WITH HEADER LINE.
data tabindex type i.
data wa_matnr LIKE mchb-matnr.
progname = sy-repid.
SELECTION-SCREEN BEGIN OF BLOCK b_b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS s_docno FOR mkpf-mblnr. " OBLIGATORY.
PARAMETERS p_docyr LIKE mkpf-mjahr. " OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b_b1.
START-OF-SELECTION.
SELECT zeile
menge
meins
matnr
werks
charg
bwart
FROM mseg
INTO TABLE t_mseg
WHERE mblnr IN s_docno AND mjahr = p_docyr.
CLEAR fieldcattab.
fieldcattab-col_pos = 1.
fieldcattab-fieldname = 'ZEILE'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Item'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 2.
fieldcattab-fieldname = 'MENGE'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Quantity'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 3.
fieldcattab-fieldname = 'MEINS'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Unit'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 4.
fieldcattab-fieldname = 'MATNR'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Material'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 5.
fieldcattab-fieldname = 'WERKS'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Plant'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 6.
fieldcattab-fieldname = 'CHARG'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Batch No'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 7.
fieldcattab-fieldname = 'BWART'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Inventory'.
fieldcattab-hotspot = 'X'.
APPEND fieldcattab.
end-of-selection.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = PROGNAME
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USERCOMMAND1'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = fieldcattab[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT = fieldcattab
IT_HYPERLINK =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t_mseg
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM usercommand1 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
tabindex = rs_selfield-tabindex.
read table t_mseg INDEX tabindex.
select * from mchb into table t_mchb where matnr = t_mseg-matnr.
clear fieldcattab.
CLEAR fieldcattab[].
fieldcattab-col_pos = 1.
fieldcattab-fieldname = 'FLAG'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Check Box'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
fieldcattab-checkbox = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 2.
fieldcattab-fieldname = 'MATNR'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Material'.
fieldcattab-emphasize = 'C1'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
fieldcattab-checkbox = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 3.
fieldcattab-fieldname = 'CHARG'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Batch No'.
fieldcattab-emphasize = 'C2'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 4.
fieldcattab-fieldname = 'WERKS'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Plant'.
fieldcattab-emphasize = 'C30'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 5.
fieldcattab-fieldname = 'CLABS'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Stock'.
fieldcattab-emphasize = 'C601'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = PROGNAME
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USERCOMMAND2'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = FIELDCATTAB[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t_mchb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.
endform.
FORM usercommand2 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
IF rs_selfield-sel_tab_field = 'T_MCHB-MATNR'.
CALL FUNCTION 'ZALV2'
EXPORTING
CTU = 'X'
MODE = 'E'
UPDATE = 'A'
GROUP =
USER =
KEEP =
HOLDDATE =
NODATA = '/'
MATNR_001 = '200-200'
KZSEL_01_002 = 'X'
IMPORTING
SUBRC =
TABLES
MESSTAB =
SET PARAMETER ID 'RID' FIELD RMMG1-MATNR.
CALL TRANSACTION 'MM03' and skip first screen.
ENDIF.
ENDCASE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = progname
i_callback_user_command = 'USERCOMMAND3'
it_fieldcat = fieldcattab[]
TABLES
t_outtab = t_mchb
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endcase.
ENDFORM.
Regards,
chandru

Necessary Fields For Creation of Service PO of Order Type Relaese Order.

Dear Guru,
I have encountered an issue which i am trying to resolve...
My this requirment will seem little okward the way i am asking but i have no way...
The issue is I have to create a Service PO of Order type Release order (RO) using BAPI Function Module .BAPI_PO_CREATE1.
The service PO should be of multiple Item and services for particular line item should be multiple.
When I am creating this using ME21 or ME21N i am facing no issue.
But when i am using BAPI Function Module .BAPI_PO_CREATE1
i am getting following errors ;; The error which i am getting as below
T ID                   NUM MESSAGE
E BAPI                001 No instance of object type PurchaseOrder has been created. External reference:
E MEPO              000 Purchase order still contains faulty items
E SE                   029 Please maintain services or limits
E SE                   140 Service HIRING OF LCD: please specify unit of measure
But I am failing to findout in which field services or limits and unit of measurement have to maintain.
What are the necessary fields have to pass in Bapi import parameter and the table i am unable to findout.
Please show some way how to resolve this or give me some guideline to resolve this
Dear Moderator request your kind intervane to move this qurry into correct forum if i have asked this in wrong forum
Thanks and regards
saifur rahaman

Hi Saifur
Can you please elaborate how did you resolve the issue we are also facing same problem when we are trying to create the PO for service items through SRM it is throwing same error while creating the PO in SAP.
Email Id : [email protected]
Thank you in advance!!
Regards
Deepika

Issue in Creation of new Value Field in CO-PA

Hi,
I have a query in CO-PA Value Field Linking.
In my Development Client,
1. Created a New Value Field (No Transport Request Generated)
2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
Please Advise.
Thanks in Advance,
Safi

Thanks Phaneendra for the response.
The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
Please Advise.
Thanks,
Safi

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

BADI for changing fields during Creation of BP in CRM

Hello to everyone,
I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.

Hi
If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
Cheers
Dom

Po ammendment fields.

Similar Messages

Maybe you are looking for