PO for 10 item getting 2item free

Hi All,
I want create PO for 10 item for every 10 item vendor offering 2 item as free goods.How do you create PO for this scenario.
BR
Govindaraj.d

Hi,
This is nothing but SAP's Free Goods concept
You have to follow following steps for MM;
1. MM02 - Material Master - Purchasing view Qual.f.FreeGoodsDis. enter here "1" i.e. Eligible for discount in kind for purchasing and sales
2. XK02 - Vendor Master - Purchasing view - Activate "Grant discount in kind"
3. SPRO > MM > Purchasing > Discount in Kind (Discount in Form of Bonus Goods) > Define And Assign Discount-in-Kind Schema > Determine Free Goods Schema > Here assign Free Goods Schema "NR0001" for combination of Schema Group for Purchase Org., Schema Group for Vendor
4. ME11/ME12 - Purchase Info Record > Here in "conditions" screen, click on button "Free Goods" (Ctrl + F1) and here click on "Exclusive" button and maintain the condition record that on 10 material X, Additional material for Free Goods will be 2 qty. of X.
OR You can use following T. Codes to maintain condition records for Free Goods, if you are not maintaining Purchase Info Record;
MBN1     Free goods - Create (Purchasing)
MBN2     Free goods - Change (Purchasing)
MBN3     Free goods - Display (Purchasing)
Here use discount type "NR00"
Then go to ME21N, create PO for 10 or more it will add one line item automatically for that item with free goods qty.

Similar Messages

HT1391 How can I get a full history of our purchases? We had some problems with some downloads since 5/25/12.We were charged for items that said "Free"? Help

How can I get a full history of our purchases? We had some problems with some downloads since 5/25/12.We were charged for items that said "Free"? Help

iTunes Store menu > View My Account...
Sign in and select "See All" in Purchase History.
You can only see them in "batches" of ten. As far as I know there is no way to obtain a comprehensive summary.
The prices are tabulated in that list. If they were supposed to be free, and they show that you were charged, then click the arrow next to the suspect purchases and click "report a problem".

FM to get the free good quantity for an item.

Hi alll,
I need to populate freegood quantity to ipc. How can i get the free good quantity configured for an item ?.
Thanks and Regards
shanto aloor

I am not sure wht is your requirement...but you can check FM - CRM_ORDER_MAINTAIN for this.

Pricing question! "buy x amount, get one free" type items

Hi all,
I've been going through all of the portal but I haven't found anyone who has mentioned the ability to make this functionality work. We have a customer who would like to make an item where you can do a true buy 5, get one free type. There are many different names for this but nothing came up on any searches. It isn't a true discount percentage as the first 5 items are still at the original sale amount, we just want to include the 6th item at no charge.
We've been thinking of different methodologies to alert a sales employee when they select the item, but really we'd like it to work like the hierarchies and expansions. Any input would be appreciated, thanks!!
Michael

Hello Michael,
I had this situation and i solved it through an Addon. DI API to be exact. Hope this helps...

BAPI_SalesOrder_CreateFromDat2 fails for items with free goods

Hi all, I have a very weird problem when I am trying to create a sales order using SAP .net connector with the BAPI function BAPI_SalesOrder_CreateFromDat2(). The problem happens through the following scenario:
1 - Item X has a free good rule on it that states "If user buys 5 Cartoons of Item X he will take 1 pack of Item Y free of charge" while Item Z has no rules like this
2 - using BAPI and .net connector, an order is needed to be created with following details:
a - Item X with quantity 6 Cartoons.
b- Item Z with quantity 3 Cartoons
3 - If BAPI_SalesOrder_CreateFromDat2() assigns these details to Order_Items_In with the same order (a then b), SAP will return an error for Item z that states "No item category available (Table T184 ZKE NORM KEN)."; while if the function tries to create the order with details in reverse order (b then a ), the order will be created successfully.
I have done the following steps:
1 - Tried the same order in SAP GUI but it succeeded. (So no problem in Item Category Determination)
2 - Tries the same order with the suspicious order in the BAPI function Test inside SAP GUI (using tcode BAPI or SE37) but the function had not return any errors also.
3 - Tried to send Item Category in code when calling the bapi function (Forced the code to KEN), but the same message appeared as SAP insist on redetermining the Item Category and return this meaningless message.
thanks

Hi Mohamed Abd Elbaset,
I am facing the same issue while creating the Sales order through "BAPI_SALESORDER_CREATEFROMDAT2" All is going well in normal cases but when I process the contract with FREE GOODS line items for which free goods condition record is maintained it fails
to create the Sales order. Is there any special treatment for this Free goods case..
Regards,

I was recently burglarized and lost a bunch of Apple products. Is there a way to get receipts for items purchased with my apple id?

I was recently burglarized and lost a bunch of Apple products. Is there a way to get receipts for items purchased with my Apple ID?

Yes if you go to http://store.apple.com/ on the top right under the search it will say "Account" or your first name. You will click or tap that and you will click "check order status" sign in. After you do that in the middle by the order date and number it will say "print invoices" and as long as your item(s) have been ship you will be able to see and print your invoice receipts. you can view items purchased in the last 18 months.

I downloaded and paid for an app on my ipad, how can I get it free on my iphone without using itunes as my laytop is broken. I cannot seem to find the purchase tab in app store? I am logged in using the same ID

I downloaded and paid for an app on my ipad, how can I get it free on my iphone without using itunes as my laytop is broken. I cannot seem to find the purchase tab in app store? I am logged in using the same ID

First, the app must be universal...designed for both iPhone/iPad:
Tap App Store.
Make sure you're signed in with the same Apple ID used for the original purchase.
Tap Updates.
Tap Purchased on the resulting screen.
Locate the app in your Purchased tab.
Tap the download icon.
The app will begin downloading and you'll be taken back to your home screen.

Getting status row for item '' activity id '' does not exist

Hi,
Need your help.
Create a custom workflow SAMPRREQ. Its having following processes.
1. Start Process
2. Respond Notification.
3. Function to update Table with the responded value.
4. End process.
After lauching the workflow, Notification send to the performer. Open the notification. When approver click the any of the result value (approve, reject, onhold) system giving followign message.
3101: Status row for item 'SAMPRREQ/20130206161924', activity ID '242956' does not exist.
I have seen some threads in the forums and bounce the database , purge the item type completly. But, still getting the error.
Regards/Prasanth

Sosa,
When i run the wfstat nothing wrong in the info. unable to find the issue.
But, i have narrow down the issue. In the function process in my workfow i am calling a custom function called update_approval_status_new.
In this the value of the respond notification to be updated to a header table of this workflow and insert into events tables.
When i comment these two dml ( update to header status & insert into events ) there is no error.
Can any one tells me can i update and insert custom tables in workflow or not. If I want to do this, what is procedure.
Regards/Prasanth

Why am I still getting this message after logging in - This computer is no longer authorized for apps that are installed on the iPhone "Myron Liptzin's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?

Click here and follow the instructions.
(71175)

HT1386 Hello, When trying to sync, I get the following message. This computer is no longer authorized for apps that are installed on the iPhone "Terri George's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

while trying to sync with my iphone I recieve the message: This computer is no longer authorized for apps that are installed on the iPhone “Terri George’s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store? When I put in my password and hit authorize, I get a message telling me there was an unknown error (-50). Would love to sync today. Any help would be appreciated.

The -50 error is documented in this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Here is a synopsis:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

When I connect my iPhone 5 (iOS 7.0.4) to iTunes it gets stuck when syncing on "waiting for items to copy"

My iPhone 5 running iOS 7.0.4 gets stuck on "waiting for items to copy" when syncing to my iTunes (version 11.1.4). I've tried;
quiting and restarting iTunes,
updating iTunes,
restarting my computer,
restarting my iPhone,
turning off iCloud on my iPhone,
restoring my iPhone from a previous back-up,
disabling "automatically sync when this iPhone is connected" and
just leaving it alone for three hours to see if it would finish syncing
But none of these things have worked... I'm not sure what else to try. My iPhone suffered an error about three days ago when trying to update to the new iOS update and went into recovery mode. I had to restore from an old back-up and that is when my troubles began. However, I was previously (before the crash) having an issue where whenever I connected my iphone to my computer it would delete all my playlists. I'm not sure if any of that is relevant.

My iPhone 5 running iOS 7.0.4 gets stuck on "waiting for items to copy" when syncing to my iTunes (version 11.1.4). I've tried;
quiting and restarting iTunes,
updating iTunes,
restarting my computer,
restarting my iPhone,
turning off iCloud on my iPhone,
restoring my iPhone from a previous back-up,
disabling "automatically sync when this iPhone is connected" and
just leaving it alone for three hours to see if it would finish syncing
But none of these things have worked... I'm not sure what else to try. My iPhone suffered an error about three days ago when trying to update to the new iOS update and went into recovery mode. I had to restore from an old back-up and that is when my troubles began. However, I was previously (before the crash) having an issue where whenever I connected my iphone to my computer it would delete all my playlists. I'm not sure if any of that is relevant.

Why do Mac users have to pay for iCloud's photostream yet windows users get it free?

Hi. I have an iPhone 4S as well as a MacBook pro upgraded to Lion, yet my iPhoto still runs from iLife 09. Windows users can use the photo stream feature for free by downloading the iCloud control panel, and yet I have to pay to upgrade my iPhoto to the latest version just to use photo stream despite the fact I already payed for a £600 phone, a £1000 2010 MacBook pro and a further £20 for Lion? I'm not having that. Especially when windows users get it free anyway. How can I get the iCloud windows toolbar/panel on my mac? Or how do I get photo stream without upgrading to the new iPhoto?

cost of iphoto upgrade is a lot less than the cost of windows vista or windows 7 operating systems.
but if you had to have it without upgrading lion or iphoto, get windows on your mac's bootcamp and then you can get the control panel for free.
but all else aside, offering apple content on windows is a means to entice users to purchase other mac products. Don't forget apple is a business designed to sell products. Do you get mad at burger king when you purchase a burger and they expect you to pay extra money for fries and a drink?

Hi, i am not able to get a Free icloud ID. Error is my device is not eligible for creating new free icloud ID. What do i do to create new one

Hi, i am not able to get a Free icloud ID. Error is my device is not eligible for creating new free icloud ID. What do i do to create new one

Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

I participated in getting the free download of Mountain Lion for new Mac owners. It took me three days to finally get a code to do it and when I tried downloading it, the estimated time was 74 days 17 hours. Now an error occurred. What do I do?

I participated in getting the free download of Mountain Lion for new Mac owners. It took me three days to finally get a code to do it and when I tried downloading it, the estimated time was 74 days 17 hours. Now an error occurred. What do I do? I am very frustrated and just want the great software to download in a resonalbe time!

Take your Mac to a location with a fast, relaible Internet connection that will be all yours during the duration of the download.
If you want to complain, PLEASE call Apple and do so.
Internet only downloads of OS X is completely stupid, it assumes everyone has reliable Internet everywhere and /or no data caps.

Last line item gets changed to first line item for cs01

HI experts,
           I have writen a BDC for Tcode cs01.
I am facing a problem in that.If sucppose there are 4 line items,
the first three line itmes are getting uploaded correctly but the kast line item gets changed to first line item.
below is part of my code.
DELETE ADJACENT DUPLICATES FROM T_MAT COMPARING MATNR.
SORT T_MAT BY MATNR. "HEADER DATA
SORT T_BOM BY MATNR1. "ITEM DATA
*CLEAR : COUNTER, ITEM_NO.
LOOP AT T_MAT INTO W_MAT.
REFRESH GT_BDCDATA.
CLEAR   GW_BDCDATA.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR' W_MAT-MATNR.
                             'lejn44001'.
perform bdc_field       using 'RC29N-WERKS' W_MAT-PLANT.
                             '4600'.
perform bdc_field       using 'RC29N-STLAN' W_MAT-BOM_USAGE.
                             '1'.
*perform bdc_field       using 'RC29N-DATUV'
                             '22.06.2010'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
LOOP AT T_BOM INTO W_BOM WHERE MATNR1 = W_MAT-MATNR.
cnt = cnt + 1.
CONCATENATE '0' CNT INTO VAR.
   ADD 1 TO COUNTER.
   ITEM_NO = 10 * COUNTER.
   OVERLAY ITEM_NO WITH '0000'.
   W_BOM-ITM_NO = ITEM_NO.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(03)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-BOM_COMP.
clear new_mark.
CONCATENATE 'RC29P-MENGE(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY.
clear new_mark.
CONCATENATE 'RC29P-POSTP(' VAR ')' INTO NEW_MARK.
perform bdc_field USING new_mark W_BOM-ITM_CAT.
clear new_mark.
clear VAR.
ENDLOOP.
loop at T_BOM INTO W_BOM WHERE MATNR1 = W_MAT-MATNR.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR' V_CNT.
                             '0010'.
perform bdc_field       using 'RC29P-IDNRK' W_BOM-BOM_COMP.
                             'PURCHASECOST'.
perform bdc_field       using 'RC29P-MENGE' W_BOM-QTY.
                             '20'.
perform bdc_field       using 'RC29P-MEINS'
                              'M'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
V_CNT = V_CNT + 10.
ENDLOOP.
CLEAR V_CNT.
perform screen_data. " IS ALL ABOUT CALLING TRANSACTION......
ENDLOOP.
following is The input file format m providing.
Material     Plant     BOM usage     Item No     Item Cat     BOM component     QUANTITY
WRJN46106     4600     1     10     z     PURCHASECOST     10
WRJN46106     4600     1     20     z     SOURCINGCOST     15
WRJN46106     4600     1     30     z     INVRESERVE     12
WRJN46106     4600     1     40     Z     INVRESERVE1     20
in this the first 3 line items are coming correctly but the 4th one gets changed to
first line item.
e.g INVRESERVE1 changes to purchasecost.
plz help.
Thanks n regards,
Ashmita singh.

Hi Suneel,
I hardly can't believe that. There must be an mistake by your own in the smartform itself. Would you please share some screens or better, the smartform-XML itself. You can pass out everything else and just share the table and a dataset to try this.
I'm pretty sure that there is something wrong with the settings or even the loop itself. I never faced a problem like that or even heared about such things.
I would love to have a look inside.
Before you share it, create a new one with just the table inside and try it with the same data. Perhaps it is just of to much folders or something like that, so the generating comes in trouble.
Regards
Florian

PO for 10 item getting 2item free

Similar Messages

Maybe you are looking for