PO item serial No

Hi,
PO item serial number will come as 10,20,30 etc.
Can we change it into 1,2,3 etc ?
Because in PO print I need serial number as 1,2 ,3 etc.
Kindly advise.
regards,

Hi Sandeep
please change PO item interval for document type and check. It is default 10. change it to 1.
SPRO --> Materials Management --> Purchasing --> Purchase Order --> Define Document Types
Otherwise when you print PO, there you can put a code in the print program to print as 1,2,3 etc
let me know how it goes.
regards
Srinivas
Message was edited by:
Srinivas Ponangi

Similar Messages

What is the field name for item serial number

hi all
i am doing dispatch report .... i need field name and table name for [item serial number (min) from batch number of that delivery material,item serial number (max) from batch number of that delivery material] ... actually this was the exact term given in the spec. can any one help me out
regards
aswin

some more tables :
SER00 .. SER08 , or type SER* in SE11 and press F4, you will get some more.
and <a href="http://www.erpgenie.com/sap/sapfunc/serialnumbers.htm">Check this</a>

Shippment document ----- Item Serial No

hi experts
i have created one delivery order report and its almost completed. but only one thing remains that is itemize serial no. when we ship any item, we have to locate that particular item serial no. to less from inventory, that all we are doing in the right way, but i cant locate that shipped item serial no. in my customize report .. cna any body help me where i can find that shipped item serial no . and its relation to oe_order_lines_all with mtl_serial_no.
regards
anwer

Hi,
The item serial numbers that are shipped will be stored in mtl_unit_transactions (mut) table. You can join oe_order_lines_all (ool) to mtl_material_transactions (mmt) and can then join between mmt and mut to find the item serial number.
Hope this helps.
Regards
Saraja

Item Serial No. on delivery note PLD

Hi All,
I want to print item serial no. on delivery note pld.
how i can do this.
plz tell me the solution
Thanks & Regards
Manoj S

Hi Manoj,
yes, you are correct. so try to use System Variable 489.
OR
If you want the Query Report, Check the thread.
Invoice details related to Serial Numbers
Regards,
Madhan.

OM--Item Serial Allocation

Hi All,
The item loaded in the Sales Order is lot and serial controlled. The system is setup to perform Auto allocation of serial numbers.
The client requirement is to change the serial numbers allocated by the system before Ship Confirmation as sometimes the Pick list and warehouse serial numbers do not match.
Is this possible?
Regards
Eby

Hi,
If the serial numbers of the items in teh warehouse and the serial numbers printed on the pick list are not matching, then user has to backorder the picked order lines and then manually allocate the serial numbers which are available in the warehouse. Then user has to run the Pick Release program again. While doing this, the serial numbers those were manually allocated to the order line will get printed on the pick list.
Ideally the serial numbers printed on the pick list and the serial numbers available in the warehouse should match; otherwise you need to clean up the system by doing physical inventory.
Regards
Saraja

Serial Number Management, how to remove item serial numbering?

Hello,
I assigned serial numbers an item on the system, but i don't use serial numbering. now when i create a Goods Receipt PO for this item i have to assign serial numbers for it. can this be removed and how? the serial numbers are managed on every transaction.
Thanks

Hi,
If you dont want to use the serial number at all, you can always go the particular item and chane the "Manage Item By" to None provided you don't have any instock for that item If you have some stock, you have to make the in stock zero and then change this setting.
Else, you can use, On release only setting rather than On every transaction. Hope this helps.
Thanks,
Joseph

Inventory items -- serial and non-serial

I am facing one problem.. i have defined the item ..in item master and declared it serial control item and then i assigned this item to my different Orgs.... now my i want to make this item .. non-serial ... how can i do that ...is there any way out??
Thanks for helping and guiding...
Junaid

hi,
check this link may be help you
http://scn.sap.com/thread/1608016
Regards,
PK

Item serial numbers are not sequence in GOA

Hello SDNers
i create a GOA for three items
01 10000001
02 20000001
03 30000003
now i am holding the contract and again i am negotiating the price with vendor and decided drop an idea for 20000001 so i delete a GOA for second item 02.
Existing Standard SRM
01 10000001
03 30000003
now we expect the below same rather than above.
We want
01 10000001
02 30000003
i can not say my business about bbp_pd concepts.I knew it is srm bug. created message too. Any solution for this?
br
Muthu

I knew it is srm bug.
Not really. The system is designed so that the deletion of items does not physically delete them from DB tables, but marking them with deletion indicator. One of the benefit of this design would be to re-instate the item should you need it in the future. The "undelete" function is already existing in some business object types in SRM. In your case, if you MUST have sequential item numbers, you could theoretically make it happen through implementation of BADI BBP_DOC_CHANGE_BADI, where you physically remove the deleted item from DB tables and sort the item numbers without skipping.

Creation of sub item with serial numbers in outbound delivery

Hi All,
We need to create a sub item for an Outbound Delivery main item in change mode with serial numbers for sub item.
Process flow:
1. Sales order item created with main item
2. Outbound Delivery created with main item
3. Outbound Delivery interfaced to external logistics sytem
4. External logistics system pick the main item and a sub item (packaging) from warehosue and ship to customer
5. External logistics sytems send delivery pick confirmation interface with main item details and serial numbers for sub item
Now we have to create a sub item with serial numbers in the delivery referencing the same main item.
NB: Delivey can have multiple similar main items but there is only material number in SAP for sub item. Hence the requirement to identify relevant sub item serial numbers to each delivery main item.
Can you kindly tell me in what possible ways we can create sub item with serial numbers for a deliveyr main item in change mode.
Thanks in advance
Best Regards
Veer

Hi,
Does anybody have an answer?
Thanks in advance.

Can we swap serial Numbers for an item instance in Install Base

Hi,
Can anyone please let me know if we can swap/replace serial number of an item instance in Install Base. If so, please let me know how to do it.
Thanks in Advance.

Oh, I did find where it is defined. It's a form function under Setup in Oracle Install Base Admin responsibility. I think you would have had it if you had CMRO installed.
Following are the values in the form:
Application Name: Complex Maintenance Repair and Overhaul
Transaction Typa: ITEM_SERIAL_CHANGE
Transaction Name: Item Serial Change
Description: Item Number and or Serial Number Change
In Out: Checked
Alka

Serial attribute and org attribute problems with item master

IF i want to unassign an item from an org, how would i do tht
The check is not updateable in the organization assignment tab
Secondly:
When i try to make an existing item serial controlled, i go to inventory tab on item master and when i change the serial control attribute GENERATION then "For some items it says APP-INV-05525: Either On Hand quantity or pending transactions exist for item, cannot change this value"
But for same item if i choose GENERATION sales order issue than it works fine.
Thirdly:
How would i Use generated serial numbers..how to assign them or use them for issuing and recieving

Regarding the 1st part of your query: Unassigning item from an Org
You cannot unassign an item that way (by unchecking the Assigned checkbox).
You have 2 options:
1) Delete the item from the respective Org if it is not yet transacted in that org.
Navigation : Items-> Delete Items
Once selecetd this will open deletion Group screen, please enter a new group name and description and for type select Item from LOV and then in details Tab enter your item that you want to be taken out.
Save the transaction and then click on Delete group button at the bottom of the screen --> this will raise a concurrent request.
If it is already transacted in the respective org from where you want to delete it then system will not allow to delete the item for audit trail purpose.
2) You can make the item 'Inactive' to prevent transactions or ordering (purchasing/sales) you can uncheck the appropriate attributes on that item in the org (assuming your attributes controls allow it at org level rather than master level).
Regarding Serial number generation options a) At Receipt and b) At Sales Order Issue:
a) At Receipt >> Create and assign serial numbers when you receive the item. As you move the material within inventory and until you issue it out you have to use the serial number for those transactions.
b) At Sales Order Issue >> Create and assign serial numbers when you issue (ship) the item against a sales order. For this option serial numbers are required at ship confirm.
Now as per the definitions given above, if there on-hand already exists in your organization(s) then you cannot set the serial generation control "At Receipt". Because in that case all existing on-hands should have serial number assigned which is not the case. On-hand should be zero to set the control "At Receipt". Hence system will prevent you from setting it to "At Receipt" when on-hamd exists. Also in your post you mentioned that you tried to change the control in Item Master, that means serial control generation attribute is set at Master level for you. In this case it will consider on-hands for that item in all the child orgs.
On the other side if you are setting serial control generation "At Sales Order Issue" then seral number is not required for existing on-hands because it will be created and assigned during ship confirm. So system will not prevent even if on-hand exists.
Considering the options available in the system your third question (How would i Use generated serial numbers..how to assign them or use them for issuing and recieving) not very clear. The "generated serial numbers" part is creating little confusion in mind as to what you are actually looking for.
As explained above, if control is set "At Receipt" >> Create and assign serial numbers when you receive the item. Use the Lot/ Serial button on the right hand corner of the material transaction screen and enter the serial number.
If control is At Sales Order Issue >> Create and assign serial numbers when you issue (ship) the item against a sales order. In the Shipping Transaction screen use Tools >> Serial Numbers option before ship confirm and enter the serial number.
But if you have set the control as "Predefined" then, assign predefined serial numbers (by generating before hand) when you receive the item. Thereafter, for any material transaction, you must provide a serial number for each unit.
Hope this helps.

Serial Number Linking to Item in any document

Dear All,
I am struggling to find the actual link to sernial number allocation table ( OSRN) to actual document detail tables ( ORIN/RIN1) of particular Item.
I do not find any references in OSRN which belongs to the document detail table. I have noticed the same in Credit Memo, Delivery, Invoice documents if the item has serial numbers. GUI is allowing user to select Item serial numbers, which is considering as DistNumber, but how the entries in OSRN relates to document detail table, could not figure out.
I appreciate your help and need your help on emergency basis...
Regards,
K Sakthivel

Hi,
You may check:
http://forums.sdn.sap.com/thread.jspa?messageID=10349722#10349722
http://forums.sdn.sap.com/thread.jspa?messageID=10423329#10423329
Please close all your open threads or respond to others' posting.
Thanks,
Gordon

Equipment number and serial number to be carried over to the new item

Hi Friends,
I have an issue regarding the " Equipment number and serial number carried over to the new item " .
AS Per my Business Process i want to reject the old line item and add same Material in that order, while adding the new line item or substituted item , the new item has to pick the old serial number and Equipment number.
For the same We are using BAPI & BDC,
IN BAPI We do not have any function module and in BDC while rejecting the old line item serial number, BDC is not recording the same and default it is Picking Delete serial number as "NO".
Kindly through a light on this issue.
Helpful answer will be rewarded.
Advance thanks
Regards
Naren
Message was edited by:
Naren Naren

Hi
I think you can achieve my making the serial and equipment synchronization in the materiel master. Adjacent to where we specify the serial no profile we can make the setting. I am not in front of the system , kindly check
Also you need to have the internal number range for equipment which should be same as serial number
Regards
thyagarajan

Unable to update the serial number through bdc in Sales Order

Hi experts,
I written the inboud FM for to update the 3rd party items serial number to the sales orders through BDC Call transaction Method.
Here i am facing a problem when i have the 19 item Quan ,it is updating correct through idoc , when ever there is moe than 19 and at that if any serial number repeated for that if i am changing at that time it is loosing the control of the BDC and giving the control to the salesorder screen.
how can i handle that control again has to come to BDC prgrm......
Thnks,
Regards,
Bharani

Hi,
Can you please let me know the segment in ORDERS05 Idoc to process the Payment card information and if the standard Function Module can handle the creation of a Sales Order with data for Payment Card.
We have a requirement to map the Tokenized Number of the Credit Card send from a store front end to ECC mapping via SAP-PI.
Thanks in Advance,

How to know , when serial number in sales order is changed ?

Hi All,
I am changing Sales order line item serial number. So the equipment number and Serial number both are changed for that particular line item. But I am unable to know, what was the last Equipment number, and Last serial number for that material of sales order line item.
Can any one please help me, how to determine the details about the date and time of change of serial number of a particular sales order line item ?

I have already checked for VA02 -> Line item -> Environment ->changes. It show changes related to fields available in VA02.
But it is not showing changes related to Serial number change.
I have also checked with table CDHDR, CDPOS. But the data related to change in serial number of SO line item is not captured in those tables also.
Is there any other way to know?

PO item serial No

Similar Messages

Maybe you are looking for