PO : ME23N

Hi,
in Tcode ME23N i display a PO (import), in the header of this PO i can show only the amounts (for delivery costs) for the foreign currency (column : condition value). But i want also show the amount with the local currency.
Please advise
Regards

Hi ,
Use below fm to display currency in local currency or some other currency.
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY_N'
EXPORTING
client = sy-mandt
date = p_ep_bldat "Posting date or Document date
foreign_amount = p_ep_hwbas "Amount
foreign_currency = c_eur "Currency already program is showing like USD Or JPY
local_currency = currency "Your To-Be Local currency
RATE = 0
type_of_rate = 'M'
READ_TCURR = 'X'
IMPORTING
EXCHANGE_RATE =
FOREIGN_FACTOR =
local_amount = p_ep_hwbas "After converting value into TO-Be Currency
LOCAL_FACTOR =
EXCHANGE_RATEX =
FIXED_RATE =
DERIVED_RATE_TYPE =
EXCEPTIONS
no_rate_found = 1
overflow = 2
no_factors_found = 3
no_spread_found = 4
derived_2_times = 5
OTHERS = 6 .
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Finally you will get value into p_ep_hwbas .
Pass parameters accordingly.definitely it will work.
For correct conversion rates you have to maintain entries in OB08 transaction.
I used this fm so many times for my reqt.
If usefull please reward .
I think your problem will be solved with this fm.
Please reward if its useful to you.
Thanks
Sivaparvathi
Message was edited by:
 Siva Parvathi

Similar Messages

ME23N purchase order history - add new fields (not in layout)

Hello,
I would like to expand the layout of Purchase order history (ME23N).
I would like to add the field MKPF-BKTXT into the purchase order history for more information.
Who can help? - Thank you. - Dietlinde

Hello,
You might have to enhance the column set of the layout..I am not sure if it could be done.. but that's the way to go.. You might want to confirm this from your technical team.
Good Luck!!

Material number is not populating in PO in tcode ME23N

Hi,
The material number is not populating in PO in transaction ME23N. The coloumns is displaying as blank and supressed(Gray).
This problem occured during the upgradation from 4.6C to ECC6.0.
We have checked the SPRO configuration for field selections and these are not having any problem.
Data is updated in database tabes but it is not displayed in ME23N screen.
Please advice.
Thanks,
Rakesh

check OSS Note 492757 - ME21N/ME52N: You cannot set field selection for material
maybe it helps to solve your issue

From ALV to ME23N

Hi
I have displayed data for Stock transfer order in ALV report.Now the user wants to click on PO number and go to ME23n to display that stock transfer order. Please tell how do i do that.
thanks.

Hi,
*-----Build Field catalog
CLEAR x_fieldcat.
cnt = cnt + 1.
x_fieldcat-col_pos = cnt.
x_fieldcat-fieldname = 'EBELN'.
x_fieldcat-tabname = 'ITAB'.
 x_fieldcat-hotspot = 'X'.
x_fieldcat-seltext_l = 'PO NO'.
APPEND x_fieldcat TO fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 i_callback_pf_status_set = 'PF_STAT'
 i_callback_user_command = 'USER_CMD'
 is_layout = layout
 it_sort = it_sort
 it_fieldcat = fieldcat
 is_sel_hide = v_sel_mode
 TABLES
 t_outtab = itab.
FORM user_cmd USING ucomm1 LIKE sy-ucomm
 selfield TYPE slis_selfield."#ec *
CASE ucomm1 .
WHEN '&IC1'.
 SET PARAMETER ID 'BES' FIELD selfield-value.
 CALL TRANSACTION 'ME23N' .
ENDCASE.
Endform.

How can I print PDF attachments from ABAP report in transaction ME23N?

Hi,
Users attach PDF files using "services for objects" in transaction ME23N.
How can I print the PDF attachments from ABAP report ?
Thanks in advance,,

Hi,
check this link,this might help you to solve your problem
/people/thomas.jung3/blog/2005/04/28/setting-up-an-adobe-writer-for-abap-output
Regards
Kiran Sure

GR\IR Assgt in ME23N after ECC6 upgrade

Hi All,
We have recently upgraded our system from SAP R3 4.7 to SAP ECC 6.0. After the upgrade we have noticed an issue in the GR\IR functionality of ME23N.
When we open a PO History in ME23N and view the GR\IR Assgt view the GRs and IRs are no longer matched together as they used to do in 4.7
Has anyone else experienced this problem and if so have they been able to solve it?
Regards,
Colm

Hi Colm,
Please check note 1413324 is implemented in your system.
You will than not have any sums anymore. The sums in the GR/IR
asignment were taken out in the standard, since they did not
reflect the desired result. It would be desired to have the sum of
GR minus the sum of IR for to see, wether there are derivations.
The sum of GR plus IR does not make sence.
The problem is, that with the ALV grid, it is not posible to substract
the invoices from the goods receipts without multiplying one of them
by minus 1. Furthermore it is neither posible to multiply by minus 1
only for the calculation. So, if we deliver a usefull sum, this would
mean negative invoice values in the history screen.
This is why we only offer the sums by a modification note. This is
note 1275531. This unfortunately is a Pilot note.
Hope this helps,
Kind Regards,
Matthew

Custom Screen using BADI seen in ME23N, ME22N Display, but not in ME21N

Hi,
I have developed a custom screen for purchase order using badi ME_PROCESS_PO_CUST and ME_GUI_PO_CUST.
But, its not visible in ME21N, whereas its dipalyed in ME23N, ME22N .
Please advise.
Thanks,
Shivaa....

In TC CMOD you can create a new proyect and use the component MEREQ001 with this component you can see adicional tab in those TC.

Send Status data to be taken by default in the messages defind during ME23N

Hi,
Is there any way to fix the following data defined in Communication Method tab for a message created in ME23N for Medium "External Send" option:
Send Status--
Requested Status: Return All Statusses
Send By Mail: All statusses
Kindly suggest.
Regards,
Puja

do you mean display the send statuses in ME23N?
I have not yet seen it, however it is a good idea and can probably be achieved with user exits and own screens.
The message in the PO shows green processed if it is succesfully submitted to the next system (print server/fax server/mail server) who takes care about outputting /sending the message.
if you do faxing and mailing with SAP, then you can get the statuses for SOST.

Delivery Schedule in ME23N

I have eblen and ebelp and I want the data for Delivery Schedule as we see in the transaction ME23N
What is the required table for the same

Its there in these tables .
EBAN Purchase Requisition
EKET Scheduling Agreement Schedule Lines
EKETH Scheduling Agreement Schedules: History
VSEBAN_CN Version: Purchase requisition
Reward points if you feel the answer helped.
Regards,
Ankur Bhandari

Table where the Delivery date is stored in Confirmation tab on Me23n

Hello ABAB Gurus,
Can anyone give me the table name where the Delivery date is stored in Confirmation tab in Item in ME23n.
If anyone is aware of it then please let me know .
Sagar

Hi,
Check the table EKES and field name is EINDT..
Thanks,
Naren

How to get the PO no in the smart form and in the print program from ME23N

hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.

Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa

Hiding a customized tab (from header and item) in ME21N, ME22N and ME23N

Hi SAP gurus,
I need to make invisible a customized tab in Po creation(me21n), change(me22n) and display(me23n) in enjoySAP transaction for a particulat Doucument type.
Please let me know the possibility and the solution to implement.
Thanks,
Kishore P

Hi Kishore,
The customized tab cannot be made visible or invisible conditionally. Instead you can write some text inside the tab to distinguish between different document types.
Hope this helps.
Regards,
Abhijeet Kapgate

Short dump while change/display a PO ME22N and ME23N

while i try to use tcode ME21N it works but when try to use Tcode ME22N and ME23N it gives me a short dump
as i have pasted the short dump screen shot in this thread please have a look and reply .
offering points is against the forums RoE
Message was edited by: Suhas Saha

Did you check for OSS notes (as this seems to be a standard program) - e.g. 1930814 - Exception NOT_FOUND in the program /NFM/SAPLSELECTS. If no OSS note solved the problem, then raise an OSS message.
Regards,
Raymond
PS: And don't promise points, it's against The SCN Rules of Engagement

Me23n user exit dynpro problem

Hello Everybody,
I'm developing a user exit for me23n transaction. I have added a tab in which i have some fields i want to fill, but i'm having the next problem.
when i enter in the me23n transaction, i push the edit button and those fields appear on editable state, but when i modify the values and push save the fields the fields continue in editable state.
I have tried to solve this problem in the catching the MESAVE action in the pai of the me22 and calling leaving to the transaction me23 with the vnew values but it's not working. Any ideas?
Here is the source code ( dynpro 111)
process after input.
field ekpo_ci-zzref_alb.
field ekpo_ci-ZZFECH_DES.
field ekpo_ci-zzeqveh.
field ekpo_ci-zzmatricula.
field ekpo_ci-zzeqtar.
field ekpo_ci-zztarjeta.
field ekpo_ci-ZZCENTRO_SER.
field ekpo_ci-ZZREF_FACT.
field ekpo_ci-ZZCLIENTE.
field ekpo_ci-ZZPAIS.
field ekpo_ci-zzdoc.
module user_command_0111.
module USER_COMMAND_0111 input.
if sy-tcode = 'ME23N' and sy-ucomm = 'METOGG'.
leave to transaction 'ME22N'.
endif.
if sy-tcode = 'ME22N' and sy-ucomm = 'METOGG'.
leave to transaction 'ME23N'.
endif.
if sy-tcode = 'ME22N' and sy-ucomm = 'MESAVE'.
sy-ucomm = 'METOGG'.
leave to transaction 'ME23N'.
endif.
Thanx

Hi,
Check the code below:
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = '0001'
language = sy-langu
name = sname "sales doc is given here
object = 'VBBK'
TABLES
lines = tlines.
if not tlines is initial.
LOOP AT tlines.
CASE sy-tabix.
WHEN 1.
ztable-field1 = tlines-tdline.
WHEN 2.
ztable-field2 = tlines-tdline.
WHEN 3.
ztable-field3 = tlines-tdline.
ENDLOOP.
UPDATE ztable SET field1= ztable-field1
field2= ztable-field2
field3 = ztable-field3
WHERE vbeln = vbak-vbeln.
ENDIF.
endif.
Regards
Kannaiah

ABAP runtime error while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N

Dear All Expert,
I am facing problem while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N,
Please find the below ABAP Runtime Error.
Runtime Errors         LOAD_TYPE_VERSION_MISMATCH
Date and Time          10.02.2011 11:13:07
Short text
     Change of a Dictionary structure at runtime of a program.
What happened?
     Runtime error
     The current ABAP program "CL_IM_WRF_MM_PROC_PO==========CP" had to be
      terminated because one
     of the statements could not be executed at runtime.
What can you do?
     Restart the program.
     If the error persists, contact your SAP administrator.
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY"
      changed
     during the flow of the transaction.
     As the type was already used in the old version
     and in the new type should be used in the same transaction in the new
      version, the transaction had to be cancelled to avoid inconsistencies.
How to correct the error
    Try to restart the program.
System environment
    SAP-Release 700
    Application server... "iqe"
    Network address...... "172.25.0.85"
    Operating system..... "Linux"
    Release.............. "2.6.9-55.ELsmp"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "iqe"
    Database type..... "ORACLE"
    Database name..... "IQE"
    Database user ID.. "SAPSR3"
    Terminal................. "MUMJML5727"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Dec 26 2010 20:17:07"
    create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
    Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 285
Patch text.. " "
Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 16192
EM...... 25139088
Heap.... 0
Page.... 40960
MM Used. 8038136
MM Free. 4528408
User and Transaction
Client.............. 600
User................ "JKMM"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D524AD1FD7A42F9E1000000AC190055"
Program............. "CL_IM_WRF_MM_PROC_PO==========CP"
Screen.............. " "
Screen line......... " "
Information on where terminated
    The termination occurred during generation of the ABAP/4 program
     "CL_IM_WRF_MM_PROC_PO==========CP".
    The termination occurred in line 213
    of the source code of program "CL_IM_WRF_MM_PROC_PO==========CM007" (when
     calling the editor 2130).
Source Code Extract
Line SourceCde
183   DATA: l_flag TYPE wrf_pbas_boolean.
184
185   CALL FUNCTION 'WRF_POHF_MSG_READ_PREVIEW_FLAG'
186     IMPORTING
187       e_preview_flag = l_flag.
188
189   IF NOT l_flag IS INITIAL.
190
191     DATA: l_header TYPE REF TO cl_po_header_handle_mm.
192
193     MOVE im_header ?TO l_header.
194
195     CALL METHOD l_header->if_output_mm~preview( ).
196
197     CALL FUNCTION 'WRF_POHF_MSG_RESET_PREV_FLAG'.
198
199 ***$ Widening Cast for printing information.
200 **    CALL FUNCTION 'WRF_POHF_STORE_PRINT_INFO_SET'
201 **      EXPORTING
202 **        im_header = l_header.
203
204 * Printing Preview
205 * IF NOT gv_preview IS INITIAL.
206 *    CALL METHOD l_header->if_output_mm~overview( ).
207 *    CALL METHOD l_header->if_output_mm~preview( ).
208 * clear gv_preview.
209   ENDIF.
210
211 * ENDIF.
212
>>>>> ENDMETHOD.
Internal notes
    The termination was triggered in function "ab_RxDdicStruShareFailed"
    of the SAP kernel, in line 2539 of the module
     "//bas/700_REL/src/krn/runt/abtypload.c#11".
    The internal operation just processed is " ".
    Internal mode was started at 20110210111306.
    Name of the changed type......: "WRF_POHF_KOMP_STY"
    New version of the type.......: 20070508193207
    Old version of the type.......: 20070508193207
    New user......................: "Type" "WRF_POHF_KOMP_STY"
    Version of the new user.......: 20070508193207
    Old user......................: "???" "???"
    Version of the old user.......: "???"
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(CTrcStack2+0x78)[0x6cbb78]
(CTrcStack+0xb)[0x6cc17b]
(ab_rabax+0x3be5)[0xb8d985]
(_Z24ab_RxDdicStruShareFailedPKtm4RUDIS0_S1_S0_+0x163)[0xb16823]
(_Z19ab_GetDdicTypeIndexPKtm4RUDI+0x1f6)[0xb0dbb6]
(_Z11ab_LoadViewPtjPKtPK11PROGRAMHEADPj+0x27e)[0xb16ede]
(_Z18ab_GetDdicTypeLoad4RUDI+0x6e)[0xb1705e]
(ab_GetView+0xc1d)[0xb0ee1d]
(_Z20CompressInitRcByDatajPK6CG_DIRjjS1_jj4RUDIPKhj+0x60d)[0xe32b2d]
(_Z21cg_CompressStackFrameP4TRIGjj+0x169)[0xe33399]
(_Z8cg_blkleP3ENV+0x75f)[0xe4779f]
(_Z9sc_cblklePKt8ENV_KINDP7SC_INFO+0x394)[0xe90024]
(sc_blkle+0xdd)[0xec6e4d]
(rs_oper_abap1729+0x37)[0x10eb237]
(rs_expan_abap+0xa1996)[0xfd7a2a]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_inclu+0x5fa)[0xe0d50a]
(rs_oper_abap2160+0x3a)[0x1115d6a]
(rs_expan_abap+0xcd41d)[0x10034b1]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_checkStart+0x41)[0xe1ac51]
(cg_generate+0xb65)[0xe57755]
(ab_gabap+0x14a)[0xb01a5a]
(dy_gen_abap+0x63c)[0x74428c]
(ab_genprog+0x13d3)[0xb03d13]
(_Z17ab_LoadProgOrTrfoPKtjPj+0xb56)[0x8f9ab6]
(_Z11ab_LoadProgPKtj+0x11)[0x8f9ca1]
(_Z15LoadGlobalClassPKtjjj9ClasState+0x24c)[0x958c2c]
(_Z11FillCfixIntPK4CREFP4CFIXjj9ClasState+0x214)[0x957404]
(_Z11ab_FillCfixtj+0x65)[0x957ae5]
(_Z26ab_CrefToCladId_ActivateOKtPh+0x7d)[0x957b6d]
(_Z8ab_jaboov+0x623)[0x959793]
(_Z8ab_extriv+0x607)[0x8ba9c7]
(_Z9ab_xeventPKt+0x1c1)[0xa1c021]
(_Z8ab_triggv+0x9c)[0xa1c77c]
(ab_run+0x97)[0xbde5c7]
(N_ab_run+0x9)[0x736359]
(dynpmcal+0x669)[0x7333b9]
(dynppai0+0x8eb)[0x734d9b]
(dynprctl+0x3e9)[0x733db9]
(dynpen00+0x4a5)[0x726eb5]
(Thdynpen00+0x359)[0x541bd9]
(TskhLoop+0xc49)[0x54d999]
(ThStart+0x20f)[0x55b29f]
(DpMain+0x2da)[0x4bd49a]
(nlsui_main+0x9)[0x4910c9]
(main+0x33)[0x491103]
/lib64/tls/libc.so.6(__libc_start_main+0xdb)[0x3cde51c3fb]
Please help me to resolve the issue.
Thanks & Regards
SKK

read this part again: The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY" changed during the flow of the transaction. As the type was already used in the old version and in the new type should be used in the same transaction in the new version, the transaction had to be cancelled to avoid inconsistencies. How to correct the error Try to restart the program
how often had you restarted ME21N before you posted this message?
In best case this message appears only once, because the program / or dictionary was changed while you executed ME21N
If many times, then contact your ABAPer, because then he probably did not transport all objects that were changed, or the objects have to be regenerated in your system.

Dump While Executing ME21N, ME22N and ME23N

Hi,
Am getting the below Short Dump while executing ME21N, ME22N and ME23N.
Runtime Errors         SYNTAX_ERROR
Date and Time          08.07.2009 15:41:00
|Short text
Syntax error in program "ME_PROCESS_PO_CUST============CP ".
|What happened?
|    Error in the ABAP Application Program
|
|    The current ABAP program "CL_EX_ME_PROCESS_PO_CUST======CP" had to be
|     terminated because it has
|    come across a statement that unfortunately cannot be executed.
|
|    The following syntax error occurred in program
|     "ME_PROCESS_PO_CUST============CP " in include
|     "ME_PROCESS_PO_CUST============CM000 " in
|    line 14:
|    "The specified type cannot be converted into the target variables."
|    " "
|    " "
|    " "
|
|    The include has been created and last changed by:
|    Created by: "SILABAP "
|    Last changed by: "SILABAP "
|    Error in the ABAP Application Program
|
|    The current ABAP program "CL_EX_ME_PROCESS_PO_CUST======CP" had to be
|     terminated because it has
|    come across a statement that unfortunately cannot be executed.
|Error analysis
|    The following syntax error was found in the program
|     ME_PROCESS_PO_CUST============CP :
|    "The specified type cannot be converted into the target variables."
|    " "
|    " "
|    " "
|Trigger Location of Runtime Error
|    Program                                 CL_EX_ME_PROCESS_PO_CUST======CP
|    Include                                 CL_EX_ME_PROCESS_PO_CUST======CM001
|    Row                                     1
|    Module type                             (METHOD)
Module Name                             IF_EX_ME_PROCESS_PO_CUST~INITIALIZE
|Source Code Extract
|Line |SourceCde
|>>>>>|method IF_EX_ME_PROCESS_PO_CUST~INITIALIZE.
|    2| CLASS CL_EXIT_MASTER DEFINITION LOAD.
3
|    4| DATA l_badi TYPE REF TO ME_PROCESS_PO_CUST.
5
6
7
8
9
|   10| TRY.
11
|   12|    GET BADI l_badi
|   13|     CONTEXT me.
14
|   15|    CALL BADI l_badi->INITIALIZE
|   16|.
17
18
19
|   20|    CATCH CX_BADI_NOT_IMPLEMENTED CX_BADI_INITIAL_REFERENCE.
Please let me know is there any OSS note to resolve the Issue.
Thanks,
Subas

Hi,
when I try to do the same in my system SAP gives me an information message as follows:-
Changes to transported Business Add-In definitions are incompatible
Message no. ENHANCEMENT236
Diagnosis
This business add-in definition has already been transported. Subsequent changes could invalidate existing business add-in implementations.
System Response
The runtime behaviour is no longer predictable. Syntax errors or short dumps may occur.
Procedure
If possible, do not make these changes. Alternatively, create a new business add-in definition incorporating the changes and use it, along with the existing definition.
It clearly indicates that the BADI definition should not be changed if active implementations already exists.
I am really now not sure how to solve your issue.
Try deactiviting the standard BADI implementation.
Then again add the filter and then remove it.
And then try activating the BADI implementation once again.
Regards,
Ankur Parab

PO : ME23N

Similar Messages

Maybe you are looking for