PO not found in EBP but shown in shopping cart status

Hi all,
I am using classic scenario in SRM 5.0...when the shopping cart is created,the purchase requsition gets created automatically in the backend...I created a PO referring to that PR..The particular PO is seen in the status of the Shopping cart...but when i try to confirm goods receipt or to create invoice by referring to that PO in EBP its says Purhcase order not found...(Though its a classical scenario i hope we can do the above mentioned things in EBP-document only gets created in backend)...what might be the problem...Please help me...
Thanks&Regards,
Hari...

Hello,
In ppoma_bbp, check the attribute "system alias" (SYS), it should refer to your backend system.
Rgds,
Pierre

Similar Messages

Approved shopping carts not displayed in shopping cart status report

Hi Gurus
we are facing an issue in shopping cart status report. When the approver selects 'Approved by me' in shopping carts status report system is not showing any list. There are number shopping carts approved by the user . Other selection like selection period, status , completed indicator were selected properly. But if the approver selects 'Rejected by me' the system is showing all the shopping carts approved, rejected, and awaiting approval related to the approver.
This is happning with one user only. We had checked user authorization and parameters and every thing is fine . Aslo compared the same with other users for whom this report is working fine . We are in SRM 5.5 extended caassic senario.
Any suggestions/solutions on this
VB SAS

In olden days of SRM , we forcily assign account assignment for PR which do not have accounting data in the PR to create a successful SC in SRM and remove the account assignment while creating a PO in the backend.
but since your in SRM 7.0
and also you made ensure that your PR has account assignment but it is not sitting in the cockpit.
and your shopping card trying to create a PO and failed right?
since it has incomplete data , how PO is creating. How system can create a PO without vendor.
escalate to SAP bvia OSS message
BR
Muthu

Product Category not transferred from CCM 1.0 to Shopping Cart

Hello all,
I have a problem where user choose item from integrated SAP catalog CCM 1.0 and add it to the shopping cart (EBP is 5.0).
When SC is displayed Category is different than in catalog.
I have only one backend (R/3 4.7) working in classic scenario.
During testing I copied material groups several times from the same backend with TCode R3AS but using FM BBP_CATEGORY_GET_GUID I checked that I have only one GUID per product grup in EBP.
User does not have default category.
In OrgStructure > Extended Attributes there is no limit on Product Categories ("*" for backend system). In this case EBP is always using alphabetically the first listed category.
If I list categories in Extended Atributes, system always use the first listed and not the proper one from the catalog.

Hello Vadim,
I should be now red due to the mistake that I made in catalog files.
In file for Supplier Catalog I did not include /ccm/product_group. After I did it everything went OK. I was thinking that CategoryID is enough. :blush:
Your answer pointed me to right direction.
Gordan
P.S. Instead of inserting breakpoints you can use procedure explained in note 847229 "OCI data passed from CCM/SRM"
Message was edited by: Gordan Flego

Requisioner is not getting change button in fully approved shopping cart

Hi Experts,
I have problem in getting the change button in fully approved shopping cart which was not created purchase order in the backend due to faulty account assignment.It needs to be changed the account information by the requisitioner .
Requisioner is having LOW in settings of BBP_WFL_SECURITY in personalisation tab.
Thanks in advance.
koushik

Hi CK,
Thanks for the reply but as per our client business requirement, requisitioner should get the change option to correct his shopping cart as the follow on document (purchase order) was not creating due to incorrect acccounting structure in the shopping cart.How should requisitioner get change button in fully approved shopping cart to correct his accounting structure.
Thanks,
Koushik.

GR IR indocator check box not flagged in the PR created from Shopping cart

Hello All,
The PR created in R3 from the shopping cart is not flagged with GR IR indicator in the Valuation tab.
We are usign SRM 4.0 . This issues has happened since last two days.
Please advice how to track this and how to resolve this issue.
Thanks & Regards,
Madhan.

Hi Swati,
The mentioned settings are already exist in our system.
Recently the support pack have been implemented in our system and since the problem is coming.
Madhan.

EBP Error while creating shopping cart

Hi,
While creating shopping cart in local scenarion am getting the below error:
"Transaction type for local system missing"
Note: Our is IDES version.
Thanks,
Manu

Hi Manu,
Please go through the following links:
transaction type for local system missing
External Requirement not able to create on SRM
Thanks,
Pradeep

Issues @ Tropicare, FL store and Open box inventory not found in store but on website

I went to the Tropicare, FL Best buy store on 3/2/15 to a Vizio 65' TV that I had seen as an open box item last week on the best buy website. I originally went on Sunday 3/1 to buy this model from the Florida city store but by the time I got there it had been sold and removed from the website. So when I get to the Tropicare, FL store on 3/2 and show the rep the Open-Box ID: 200002100650426. They tell me they cannot find any such listing. I told them to check another Open-Box ID: 200002100650349 for the same item. I figured since they have the item listed twice on the website both as Geek squad certified that there should be 1 available. They could not find that product either. I pulled up the information on my phone to show the rep. He proceeds to tell me they don't use the website to track inventory and that it takes awhile for the website to update. I found this odd since the other stores I went to on Sunday 3/1 when I had gotten to the stores the items were sold and the items were removed from the website. So I had the rep call another store to see if the last TV only my list was available. They told me it was not, so I checked the website and it was gone. I showed the rep this and they blew me off once again stating they don't check inventory via the website. I told him I find it odd that best buy wouldn't track inventory via there website. He proceeds to show me more expensive options. At this point I was tried of running around south Florida trying to find the Vizio model I wanted. I purchased a LG 65' for $799 which was from the weekly ad. But I wanted to know what the policy was regarding open box items, inventory levels, and availability.
I still would like to buy the VIZIO - Open Box - 65" Class (64.5" Diag.) - LED - 1080p - Smart - HDTV - Black Model: D650I-C3 SKU: 1078018 Open-Box ID: 200002100650426 or Open-Box ID: 200002100650349. As of 3/3 the items are still on the best buy website listing them available for purchase. I would like to buy this item and return the LG I bought yesterday since it is the TV I wanted. BUt i'm afraid I'll run into he same situation of them not "finding" either of the items in there store in stock.
Any assistance or clarification would be greatly appreciated.
Thank you,
Omar

Hello Omar,
Finding open-box items in fantastic condition is always an exciting purchase! To find that not only one, but two open-box items listed at the same store weren't available would be quite disappointing. I am truly sorry for any frustration that this may have caused you.
With that said, I was able to locate the open-box items in our system, and they would appear to currently be in stock. However, it seems that these items are reserved to fulfill orders that have already been placed. With that said, the store should be responsible for updating their open-box inventory to correctly reflect open-box items available. As you seemed to experience, these inventories can change instantaneously, so stores should be vigilant with these updates.
I apologize for any disappointment that this may cause you. Please know that I am reaching out to the Tropicaire, FL store to ensure they are updating their open-box inventory appropriately. If you should need any further assistance, please let me know.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

3G not found by iTunes, but 3Gs is

I’ve owned an iPhone 3G for some time, and hardly ever syncd it, but up until recently, I wanted to, and found that iTunes running on my home-built Windows 7 64-bit PC wasn’t “seeing” the phone. When I plugged the phone in, iTunes would freeze for several minutes, then unfreeze, but still wouldn’t see the phone.
I always assumed it was the PC. I did many reinstalls of the iTunes software, including the "techier" version described in Apple's support forums, but couldn’t ever get it to work properly. Not a big problem since I had no such problem syncing the same phone to iTunes running on my XP laptop, and when I just had to sync something, I’d do it there.
But, just for fun, I decided to try my wife’s newer 3Gs on my home-built PC. It sees her phone immediately, which leads me to believe the problem isn’t the PC, but the 3G itself.
Any suggestions?
I’m really not in love with AT&T, so while I’m not ready to cut them loose completely, I don’t want to upgrade to a 3Gs and another 2-year contract if I don’t have to.
Thanks in advance!

Solved problem. Rebooted the Nano (hold down center and Menu until screen goes blank) and XP immediately recognized the device.

My iPod shuffle is not found in iTunes but is found on Windows

Ok here is my problem. When I purchased my iPod I loaded the iTunes program onto my computer from the disk that was included. For awhile I was able to import songs and add them to my iPod. After a few weeks I tried to add more songs to my iPod but when I connected it to the USB port in the back of my computer the iTunes program said there was not an iPod connected. At that time I did all of the 5 R's and eventually iTunes recognized my iPod and I was able to add my songs back to it. When I tried to add songs a few weeks later it did the same thing. I have tried every USB port that is located on my computer and it still does not show in iTunes. I have done ALL of the 5 R's. I have deleted the iTunes program and everything associated with it and reloaded it again (I have done this 3-4 times). My iPod is showing up in Windows but it is not showing up in iTunes. I have looked at all the manuals online and done everything they have told me to do and I still can't get this thing to work. So now I have an iPod with no music on it and can't get the program to acknowledge my iPod. PLEASE HELP!!!!!
Gateway Windows XP Pro Ad-Aware, Windows Firewall, Spybot

Question -
When you say your iPod is recognized by MyComputer, is it showing as an Apple iPod or a Removable Disk?
You might want to try restoring the iPod once more, and if it doesn't correct the issue or if you're unable to restore, you can go ahead and format the iPod through Windows. Doing so will erase everything on the iPod, however, it normally allows iTunes to recognize it right away.
To reformat the iPod through Windows:
-Connect the iPod and wait for it to be recognized in My Computer.
-Right Click on the iPod's icon in My Computer, whether it is an Apple iPod or a Removable Disk.
-Click on Format
-Click on QuickFormat
-Click on Start
When it is complete, iTunes should open more or less automatically with the iPod Setup Assistant, where you can rename it and sync files to it.
**Note: Sometimes, when going through this, your computer will become extremely sluggish. It is important to be patient, and not click on the buttons more than once.
Good luck!
Feel free to reply with more questions, or if you're having more problems.
~CG

T-code not in any role but shown in the SUIM report

Hi friends
I have a t-code which is not any role, but when i run the SUIM reports for Where used list>Authorization Values>In Roles by entering the S-tcode in the Object1 field and t-code in the entry value field the report brings out a role where this t-code is used. I have been into that role and checked if that t-code is in the menu tab, but i could not find it. I also ran the SUIM for Roles By Complex Selection Criteria but i could not find a role where this t-code is in. But how come when i run the report for Where Used list it brings this t-code
Any quick thoughts on this are highly appreciated as this is a High priortiy.
Thanks in advance
KV

Abhishek Belokar wrote:Hello Abhishek,
As Alex indicated, you can use this FM (function module) to correct inconsistencies, primarily on the UST* tables which are used by SUIM. If you have been doing a lot of manual changes to authorizations and using ranges, then this can happen (particularly so if you are changing authorizations in production...). As far as I know, in the latest SAP releases (from 6.40 onwards) this should not normally occur that easily...
I looked into this FM a bit, as I have not used it in quite some time now (see above comments).
Right upfront, the function group name which it belongs to (SUSI) has a "(FOR INTERNAL USE ONLY!)" comment in it...
Perhaps you also read that comment (which is activity '03')...
I was however not able to generate a test environment and execute it, because I am not authorized for SUSI... (see SAP note 587410 to distinguish between them).
I did find reports which call this, so you might be lucky there (and not need S_DEVELOP authorizations to do this... but without the table_type = 'X')
However, I did try to make a bit more sense of it, without actually running it... (some corrections to my above post - but still not authoritative on the topic)
table_type 'U' = (which is default) synchronizes USR04 from UST04, however UST04 might still have phantom entries in it.
table_type 'P' = synchronizes UST10* from UST04, though how that is meant to work I really dont know.
table_type 'A' = synchronizes UST12 from UST10*, see above and also includes "BIS" values.
table_type 'X' = syncrhonize UST04 from USR04, then table_type 'U', 'P' and 'A'.
Running it "just for fun" is okay in a sandbox...
Running it in a production system.... is also okay to fix a mess once you are there... but you could seriously disrupt the business processes (see above comment about manual changes, also in production).
>
> I ran this function module in a sandbox....and guess what...i saw some changes :
> I ran with parameter 'X':
>
> (Picked 3 UST* tables, number of entries)
> Table             Before           After
> UST04       67,651     67,340
> UST10C     10,972           10,968
> UST10S     198,915          198,902
Consider yourself blessed (unless the developers run this regularly in the sandbox...
Kind regards,
Julius

Videos not found in ipod but its ther in itunes.

i hav an 80gb classic....de problem is de sync has probs....i find de added videos in i tunes....all re acceptable fomats...it WAS also playing well in de ipod..but suddnly de video only appear in itunes nt in ipod....pls anybody answer my ques..bt everythin s in de itunes...no probs wit de songs only videos ...waitin fr my query to be solved

Hello de rock,
And welcome to Apple Discussions!
Do these videos still play okay in iTunes? Are you receiving any error messages about certain items not being able to transfer because they cannot be play on your iPod?
How do you have your iPod set up to sync? Automatically or manually? Do you also have the "sync all checked songs and videos" option ticked from under your iPod's Summary tab in iTunes? If so, make sure there are tick marks next to each one of your videos in your iTunes library. Then try re-syncing your iPod and see if that helps.
B-rock

Time capsule not found by airport but ethernet cable was working

So I turned time machine off some time ago,( got fed up with it constantly saving whilst recording music and slowing down stuff), now although i was happy (ish) as it was before, i can no longer find in preferences a drive to use as backup.
the alert box tells me that airport cannot locate, when i previously, and still do, have ethernet cabling connected .
The time capsule green light shows, but not backing up.
Can i find back up drives without airport utility being used?

Thanks for th response, i have upgraded to lion some time back and as i recall i've had this prob before and had to do a verification of some kind using the clean up disc utility.
I have already done...
the verification again without success, I did a repair disc permission on the Mac HDD,i did a restart of TC by unplugging and replugging without success.
I use TC for backup only, using ethernet and my router is wireless.
i'm reluctant to reset although I would if I could be sure.
What is the 5.6 utility?
My version 11.5.2, should i install the 5.6? if this is indeed an upgrade?
thanks for your time and patients
steve

Flickr contact not Found?? But Netflix works...

Cant get the Flickr login to see my Flickr account even tho all my pics are Public.
Having trouble logging into my YouTube account as well.
But logging into Netflix was a breeze and works well - except for some missing genres.
Any clues from fellow users?
Thanks
-jon

Got the answer from Flickr Support:
(even tho my photo were set to Public my Profile wasnt)
+Thank you for contacting Flickr Customer Care.+
+Currently your profile is hidden. Your screen name will not+
+appear in the member search. Also, your account will not appear on+
+the profile pages of your contacts. You can change this on your privacy+
+settings page.+

WD passport not found on MBA but on windows

Hey,
I've had a MBA and a 750gb WD my passport since august. the harddrive has worked fine till this morning when it wouldnt show up on my MBA or my brothers macbookpro, yet shows up on a windows unit?? this happened just after a software update to 10.7.2, possibly related??
please help!!! im screwed!!!

My guess is that it's not getting enough power to the port. You probably need a "Y adapter" cable that pulls additional power off of an additional plug. Here are a few possibilities.
http://www.bixnet.com/5vps2powercord.html
http://www.bixnet.com/usbcawibuba.html
http://www.overstock.com/Electronics/Apricorn-AUSB-Y-USB-Power-Adapter-Y-Cable/2 632913/product.html
http://www.amazon.com/USB-Power-Adapter-Y-Cable/dp/B000JIOHDE
I've got a 160 GB WD Passport that works fine off of one USB port on my MacBook and iBook G4 1.42. I've also got a 160 GB SimpleTech Pininfarina Design drive with WD Scorpio/Initio chipset. The latter works off of one port on my MacBook but requires the second power port on my iBook. The SimpleTech drive came with a Y cable, but the WD Passport didn't.

Delta records are not found in RSA7 but can be seen in RSA3

0HR_PY_1
Delta records for 0HR_PY_1 is not showing in RSA7 for the month of April
but showing in RSA3.How can we load to BI when they are not appearing in RSA7?
Can any one please guide what and how many transactions should exactly lead to the updation of RSA7 delta queue?
If the list of the transactions can be given,I can cross verify with the users whether these transactions are already over or not.Help is sincerely expected..Kindly help.
Regards
Sharif.

Hi,
Please examine this note for RSA7 : 380078

PO not found in EBP but shown in shopping cart status

Similar Messages

Maybe you are looking for