PO number and Po item?

Hi ,
Can anybody know..
I need one FM which takes the PO number and Po item and which returns ?
The corresponding invoice line item details. Please look into the issue and help me ?
Thanks
Siva.

Hi,
You just go through this fn.m u2018MM_PO_GET_INVOICE'.
Hope it will helpful.
Regards,
Anki Reddy.

Similar Messages

  • Purchase requistion number and line item number linkage with work order opr

    Hello,
    I want to know what is the link between Purchase requisition number along with its line item number with work order operation number.
    For the non stock component assign to Work order operation ( say operation 10) the PR get generated for that component which assign to that operation .
    in which table we can find that PR as input and output as Work order number along with its operation .
    In AFVC table if we put PR as input then it does not show any entry for that PR number?
    Regards
    Vaibhav

    HI Vaibhav,
    If you have the Work Order Number AUFNR, then you can get AUFPL from AFKO.
    Then Pass AUFPL to AFVC table to get BANFN(Purchase requisition number) and BNFPO(Item number of the purchase requisition in the order).
    Regards,
    Ravi

  • MIGO-sales order number and line item not validated for 501E mvt in MIGO.

    Hi All,
    In MIGO i am trying to post for 501E(specisl stock=order on hand) movement type, here i am entering the material and in the where TAb even if I enter wrong sales order number or wrong sales order line item number. the system allows to post .
    its not validating the material against the sales order number and line item number that is entered to check whether that material really exists in that particular sales order or not.
    is there a way to fix this?
    Thanks
    Mahendra

    hi
    i dont think vvalidation is possibel
    as the system dont know whaich material is assigned to which SO
    as we r takeing the stock without PO
    if u want to validate then system can validate the quantity that is also with use of some user exit
    correct me if i am wrong

  • Line item number and ledger item number posted differently

    Hi Friends ,
      I have a BAPI for posting the documents in SAP from another system.This BAPI is using the standard BAPI -  'BAPI_ACC_DOCUMENT_POST' to post the documents.But when I post the document using this BAPI the line item number and ledger item number in the document are posted differently. ie . for line item no 1 ledger item is 24 .But when I am posting it directly it is same ie for line item no 1 ledger item no is also 1.Lot of other programs in our R/3 system is dependent in this logic.What could be the parameters in BAPI that could affect line item and ledager item ? Can anybody help me in finding out the reason for this ?
    Thanks in advance ,
    Joby

    Hi ,
    Anybody can help me on this issue ?
    Thanks in advance ,
    Joby

  • According to PO number and Line item data should come once but its repeatin

    I am calculating IR Quantity and IR value......
    for a PO  if there are four same  line items i wanted them once but they are displaying for each and every line item
    If my po is 2003000151 and line item 0010 if both are same then i wanted ir quantity 500
    but its displaying like this
      PO                 item   IR
    2003000151   0010 500
    2003000151   0010 500
    2003000151   0010 500
    2003000151   0010 500
    I need like this
    2003000151   0010 500
    2003000151   0010
    2003000151   0010
    2003000151   0010
    If po number and line item are same IR quantity should be displayed only once..
    What should be done if it should not repeat in each and every line item if both PO and line item are same

    i am having internal table of it_ekko.
    in that i am having some data of PO no, Line Item,IR value and IR qty......
    i am having data like below.
    PO                        Line Item   IR Value    IR QTY 
    200310051          0010         1500           4500
    200310051          0010        1500           4500
    200310052         0010           0                   0
    200310052          0010       0               0
    now where ever IR value and IR qty is present i wanted that to display only once against that PO and line item
    i wanted like below
    PO                        Line Item   IR Value    IR QTY 
    200310051          0010         1500           4500
    200310051          0010            0              0
    200310052         0010             0                0
    200310052          0010            0               0
    Field names for IR value and IR Qty are Menge2 and dmbtr2.
    How to do that.........
    I cant use
    Delete adjacent duplicates of it_ekko by ebeln = wa_ekko-ebeln and
                                                                          ebelp = wa_ekko-ebelp.
    because i wanted that po and same line items , how many times it is like that only.....
    in it_ekko table i only wanted to delete duplicates of menge2 and dmbtr2.
    Pls suggest the code

  • How to get PO number and line item in he check item method of MB_MIGO_BADI

    Hi All,
    First time I am using BADI and I am stuck in one issue.
    I am using CHECK_ITEM method of MB_MIGO_BADI.
    While pressing CHECK button MIGO for a GR(wrt to a PO),a warning message has to displayed.This warning message has to displayed according to the line item in the purchase order.
    In the CHECK_ITEM method, how I will get the PO number and the line item imported into that method.?
    Thanks.

    HI  ,
    in Check_item method 
    DATA: ls_extdata TYPE zqsscrap_screen_field .
    LOOP AT gt_extdata INTO ls_extdata .
    endloop.
    Check what you are getting  .
    regards
    Deepak.

  • PO comparison with similar materila number and line items

    Dear Friends,
       I wish to know in a report how i classify the pos having similar material and line items in each other, Like po number is 12 and has material numbers 1, 2, 3
    where po number 13 and has material 1,2,3. how i fetched the data from the table and classify them with similar material and line items, please tell me. any article, example, code will be grete help of mine,
    thanking you
    regards
    Naim

    Guess you need to display report with Purchase Order nos where Material nos are similar.
    On selection screen add parameters Material and Line Item no. Both should ba mandatory.
    Get data from EKPO where MATNR = P_MATNR and EBELP = P_EBELP.
    Display the same in report output.
    Just need to check with you - Material nos can be same on multiple POs but Material, Item no combination may not be.
    I can use same material in another PO with different Line Item as other PO already has some line items. Why do you need this check?

  • PO Number and Line Item Number for Invoice Plan Number

    Hi Experts,
    Can somebody please guide me how to fetch the PO Number and respective PO Line Item Number for an Invoice Plan (FPLNR).
    In FPLA Table, PO number is available but line item number is not available.  If a PO is having multiple line items, different line items will have different Invoice Plan numbers.
    Thanks in Advance.
    Radha Krishna Madineedi

    Hi Ramesh,
    I have got the answer after posting this thread.  We can get the PO Number and the Line Item from EKPO Table itself by passing the FPLNR.
    Anyway,  thanks for your reply.
    Regards
    Radha Krishna.

  • How to manage the same counter based on Order Number and Order Items

    Hi All,
       we need some help to build an infocube and a query as described in the following scenario.
    ODS 1 (Order Numbers aggregated at month level) defined as:
    - Order Month
    - Customer
    - Counter
    ODS 2 (Order Items aggregated at month level) defined as:
    - Order Month
    - Customer
    - Product
    - Counter
    We would like to build an InfoCube that allows us to create a query through which we are able to compare:
    -  ODS 1 - Counter, that means the number of orders without considering the product
    -  ODS 2 - Counter, that means the number of orders where a specific product is included
    For example:
    ODS 1:
    Order Month........Customer........Counter
    200701...............20001.............10
    200701...............20002.............5
    ODS 2:
    Order Month.............Customer...................Product..........Counter
    200701.....................20001.......................A....................1
    200701.....................20001.......................B....................10
    200701.....................20002.......................A....................4
    200701.....................20002.......................C....................5
    The desired query should show the following result
    Ord Month.Customer..Product.....Counter....Counter
    .................................................(ODS2).....(ODS1)
    200701......20001.......A..............1..............10
    200701......20001.......B..............10.............10
    200701......20002.......A..............4..............5
    200701......20002.......C..............5..............5
    Do you have any idea how to get this result?
    Thanks
    Kind Regards

    Hi Valeria,
        Have a look,
    <a href="http://sapbwneelam.blogspot.com/2007/08/sap-tables.html">How to... Count the occurrences of a characteristic</a>
    <a href="http://sapbwneelam.blogspot.com/">More Docs .....</a>
    Hope it Helps
    Srini

  • F110- Check number and open item

    Good Morning SAP Guru's,
    A new one for me here that I need some help with-
    I executed F110 on our payment method 9 and I got a debit entry to offset the item and it moved them to cleared however I still have the item in open items as a credit.  Is this because I didn't print the check yet?  The debit entry has nothing in the reference field which would/should be the check number if printed. 
    What am I doing wrong?
    POINTS PROMISED

    hi,
    After running the Payment Run you have to do 1 more step
    Fo to Tcode Se38 and enter the RFFOUS_C and execute it.
    It will ask u abt the Program Run date and Identification Feature, pls fill all the required information and execute it.
    Pls note u must creat the Check lot number in Tcode FCHI.
    Assing points if this solution is works out......
    Ranjit

  • BOM Item number and the pr number created through network

    We can create PR through network. If we know the PR number and the item number, how do we find the BOM item number in the network?
    BOM item number
    Item number of the BOM components copied into the order.

    RSDB
    RSBD POSNR

  • 57F4 Challan printing with Purchase order number and parent material

    Dear Team,
    As a SAP standard 57F4 subcontracting challan will have only legal entities,child materials, quantity, assable value etc.
    but as a client requirement we need to incorporate the PO number and line item in the 57F4 challan, additionally client requires the parent material also printed in 57F4 challan
    Anybody can help me how to get the PO number and parent material in 57F4 Printing, because i have already searched in MSEG table but for the material document number iam not able to find the PO number and line item.
    iam posing the GI with referenc to purchase order only. but even iam not getting the PO number with reference to the posted document number in the table.
    J Sridharan
    Satyam Computer Services Limited

    thanks for your reply hemalatha,
    i have tried with OMJ3 transaction, but it is purely a print parameter settings for J1IF form. please help me where i can maintain this settings to get the output in MSEG table.
    moreover iam creating all the subcontract material documents with ref to PO number only through MB1B transaction. please advise.
    Regards
    Sridharan

  • Line item and Ledger item difference when parking through BAPI

    Hi Friends ,
      I have a BAPI for parking the documents in SAP from another system.This BAPI is using the function module PRELIMINARY_POSTING_FB01  to park the documents.But when I park the documents using this BAPI  and post the document manually  the line item number and ledger item number in the document are posted differently. ie . for line item no 1 ledger item is 24 .But when I am posting it directly it is same.Lot of other programs in our R/3 system is dependent in this logic.Can anybody help me in finding out the reason for this ?
    Thanks in advance ,
    Joby

    Hello,
    Which BAPI you are using. Use BAPI_INCOMINGINVOICE_PARK.

  • HOW TO GET CONNECTIVITY BETWEEN PO NUMBER AND BILL OF MATERIALS

    SIR
    my requirement is that to print the purchase order number and the item in that po number and if that item contains any components in BOM (tcode -cs02) then to print those all components.
    Ebeln and  matnr is stored in ekpo table .
    corresponding to that matnr how to see the component because STPO(bom item table) do not contain ebeln and matnr field.
    it contains the component field ie IDNRK
    SO PLEASE TELL ME HOW TO WRITE A REPORT TO DISPLAY ALL THESE THREE THINGS
    po number and item inside it and if this item contains component then to display all that components .
    reply as soon as possible.

    Hi
    Pass the PO Material and Plant
    <b>EKPO-MATNR and EKPO-WERKS to MAST table and take the BOM related fields
    STLAN
    STLNR
    STLAL</b>and use them in STKO and STPO tables and get the BOM info.
    Reward points if useful
    Regards
    Anji

  • 57F4 challan print - getting parent item no and po number for child item

    Hi ,
    In 57F4 challan, Subcontract components - i.e Child items are used for creating the challans.
    However while printing needs the parent item no with the purchase order number for that child item number.
    It is getting stored in RM07M structure.
    Any inputs / suggestions how to retrive parent item number and purchase order number for child item i.e for subcontract items?
    Thank you .
    Prasad.

    Thank you for the reply. I checked the table RSEG table for material document and PO details, however the RSEG gets populated when there is credit or debit entries.
    In this 57F4 challan there is no credit or debit enteries hence would not get in RSEG table.
    Appreciate your inputs for any other alternative.
    OR is there any table or Function Module to get the enteries of the struture of RM07M .

Maybe you are looking for