PO released dates by releases ?

Dear MM gurus,
Request pl let me know is there any Standard Report to see the PO Releases along with dates & release levels with sap user id. (PO releases history)
Pl help
thanx in advance
regards
Srihari

Hi
As u know ME28 and ME29N used to release PO's
U can check release date from CDHDR table in SE16/SE11
follow the path
T code SE16 -Table CDHDR -->enter PO number in <b>Document Number</b> -->enter Trnx ( click yellow arrow in front of it enter both trnx code i.e me28/me29n execute)
Now execute the report u will able to see release date for ur PO
Also u can check Release date/user ID in ME23N
Go to Environment-->Header changes
here ur able to see release date
Vishal...

Similar Messages

MSI Big Bang XPower II X79 release date

Whats the release date for this motherboard to the UNITED STATES?
MSI Big Bang XPower II X79 LGA 2011

We don't know, we have nothing to do with MSI marketing. We are MSI product users the same as you helping each other with problems and have nothing to do directly with MSI. You would need to ask MSI. Question like that my typical answer is that you will know the release date after you see it for sale in the stores.
>> How to contact MSI <<
http://us.msi.com/service/PreSaleForm/
As a matter of fact if we knew the release dates of products like that we would post it in the forum to avoid those kind of questions all of the time.

Why is it that when looking through new apps in the apps store on my ipad in release date mode does it return to the first 1-12 after viewing pparticular apps?

why is it that when I look through the new apps in the apps store in release date mode it returns to the first page after veiwing more information about some apps, I could be ten to twenty pages in and have it happen.
Also, I only speak and read English and although there are probably great apps for people from other nations, I don't want to wade through all the apps that I can't make use of. I expect that people of other nationalities or languages don't want to have to wade through every app that they can't make use of, is there not a way that alI users could filter by language?
I mean no offence to anyone but with a collection of hundreds of thousands of apps in all languages and the jump back to the begining after possibly being into the list by a number of pages I stop looking after awhile and I'm sure I've missed some excellent apps by doing so.

Contact iTunes support : http://www.apple.com/support/itunes/contact/

Report for POs pending Release (approval) and POs overdue (past deliv date)

Hi All,
In ME2N - std report for POs. How do I set the selection critieria in order to get the following information
1. POs pending Approval (subject to Release Strategy)
2. POs pending delivery from Vendor where the delivery date requested in the POs is past. (How does Selection parameter WE101 help in this report.? How to show how many days past requested delivery date in the PO?)
Thanks in advance

Dear,
1. POs pending Approval (subject to Release Strategy) : -
Enter ME2N, select Dynamic Selection.
Here click on Purchasing Document Header,
Double click on Release Indicator field and assign "X" ,
Then souble click on Subject to release and also give "Yes" indicator then click on execute you get list of purchase order which is unrelease.
2) POs pending delivery from Vendor: -
Enter ME2N, Select selection parameter WE101,
Here you can find list of pending purchase order, You can see document date or delivery date from change layout to find out how it is past.
Regards,
Mahesh Wagh

Standard report with po released date

hi mm experts,
request pl let me know is there any standard report which gives the po details and release indicator with released date of po.
pl help.
regards
Srihari

Hi
U can get Po release date per release code, use CDHDR and CDPOS tables in SE16
Enter transaction as ME28/ ME29N, Enter the range date,enter the object value as PO number (PO number should be 10 digit if the PO is not 10 digit, then add zero value for the prefix).
Then you can find the release date
Rest details u can find from ME2N report i.e Po details and Release indicator using dyanamic selection
Vishal...

Purchase Order released date field and table name

Hi,
Please tell me the Purchase Order released date field and table name.
Regards
Deepak

Hi,
Table : EKKO.
Fields : FRGKE,FRGZU.
You can get release date of PO from CDHDR table.
give object value as your po number and check.dont forget to give leading zeros.
The udate will be date field and transaction will be me29n for relaesed po.

Release date and release no of Scheduling Agreement

Hi All,
I have a problem with Scheduling agreement.
I have created a scheduling agreement with long validity period.
I maintained delivery schedules within that validity period.
I have generated forecast schedules. then using ME84, creating a releases.
the problem is occurs here.
it was not updating the release no and release date for the schedule line.
still it is showing a *yellow light* .
where is the problem and why it was not updating.
and can u please explain the process and significance of those lights.
Thanks in Advance.
Regards
Kishore

Verify the table T161M has the values
kvewe = 'B'
kappl = 'EL'
druvo = 1
kschl = LHPA
as mentioned in the code.
The solution is add in SPAD the

Table for Invoice release date

Hello,
Can anyone tell me the table name in which I can get the Invoice release date (Invoice was blocked previously and released with MRBR). I want the date at which it is released through MRBR.
Thanks,
Input

Dear Input_Output,
When ever we perform LIV and is blocked for payment (due to price variance or other variance) is stored on table RBKP_BLOCKED
Now when we release it through t. Code MRBR that time its get deleted from RBKP_BLOCKED
Now to get the date of release Use can Use table CDHDR
Where OBJECTID =Invoice no+year (e.g 51056066022011 where is 5105606602 invoice no 2011 is year)
Tcode =MRBR
You will get the fields called UDATE and UTIME these are your release date and release time
Hope it clears

TAble for PO Release date

Hi all,
Plz tell me the table in which i can get PO Release date.
Best Regards,
Savita

Hi Savita,
The Release dates of the PO are unfortunately not stored in SAP but as stated above you can check the change documents in the follwowing manner:
Go to CDPOS table with Objectid = <PO Number> and OBJSCTCLASS = EINKBELEG and FNAME = FRGKE and NEW_VALUE = <Final release code> and get the CHANGENR from CDPOS. Then go CDHDR with the CHANGENR and get the update date..

Table for PR Release date

Hi Friends,
I want to capture the PR release date. But I could not find the table. Can anybody please provide me the table where PR relase date is captured?
In ME53N, in item detail, in "Quantities/Dates", the release date is not the actual relaease date on which the PR got released. I can see the actual release date in Environment-->Item change. But I could not find the table wheere it stores the actual release date.
Please suggest.
Thanks & Regards
Satya

Hi,
As I have explained in my mail, that field is not the actual PR release date. even afterrelease also that field is changeable. System bydefault takes the PR creation date as release date. But If I release after 10 days of PR creation, then EBAN-->FRGDT is not getting updated.
Please suggest.
Thanks & Regards
Satya

DP forecast not released to SNP - error "Invalid Data Status"

Hello,
When DP forecast was released to SNP, one material - Location went into error. The error is "Invalid Data Status"
Release to DP to SNP is thru background job, and it check the material status (only material with active status is considered for release).
But for the above error, the material is active.
What could be the possible reason for this error & how can it be resolved.
Thanks in advance.

Hi Datta,
In consistency match, there are multiple objects. Since DP is new to me, I am not aware of the objects that should be selected. Can you tell me which objects should I select for this and what will be the outcome of this.
Also can you please explain me why do we execute his transaction?
Thanks in advance.

How can I sort albums in a genre by release date in the itunes store

How can I sort albums in a genre by release date in the itunes store

Did you figure this out? Am having the same problem.
EDIT:
Found the group in store (in this case Juana Molina) It said music -> alternative
Changed to column view, and could not find the artist at all in any of the sub categories.
iTunes is really the biggest pain in the .... and has gotten worse over the years.

How can I get Firefox to "grab onto" and then "hold onto" the data signal until I tell Firefox to release it at the end of my session of internet browsing?

ok, I hope that my description of this problem does not come out in such a disorganized fashion that it makes the description difficult to follow. here goes: every 30 seconds to 1 minute (or thereabouts, I'm estimating) my mobile phone's browser (whether Firefox or any other) loses the data signal, so that tje next time that. I click on something, I get an error message that the "data connection timed out, retry" or "network unavailable" or "check that you are connected to that internet", etc. etc. etc. I have downloaded many apps that are supposed to boost data connectivity and/or improve internet speed, blah, blah, blah, till I discovered that was a problem with the server being able to keep up with staying locked onto my browser. in one of these apps diagnostic screens, I found a notation that therr was something wrong with my cell's relative position. well, how could that be, I wondered, since I had "GPS tracking" "GPS reporting" and "location sharing" all enabled? but, then I noticed, on the image of my cell's location as represented by this particular app, that every half minute, or so, the blue dot which represented my cell's location would slip to the left about one quarter of an inch, or so, and in the longitude and latitude part of this app's diagnostic screen I saw that the numerical designations of my cell's longitude and latitude were zero and zero. it suddenly occurred to me that the server had lost sight of my cell because my cell had moved too far out of the range of that server's sight due to the rotation of the earth. well, blow me down, what am I supposed to do to fix that? how can I tell my cell phone's OS to send out some kind of identifying info on a constant basis, so that the server could keep track of it (and I would not lose the signal)? or, conversely, how could I get my cell phone's browser to grab onto the signal and not let go of it until I was done with that internet session, at which time I would then manually release the signal myself? I hope that my explanation of the problem made enough sense that you could follow it and that you can come up with a workable solution for me. oh yeah, my phone is an LG OPTIMUS ELITE 696. thanx, from the enragedkangaroo.

Hello,
I'm afraid I don't think there is going to be much we can do to help you here. The description sounds like an issue with the phone rather than with Firefox specifically.
I don't think the problem can be caused by you moving out of range of the cell, due to the rotation of the earth. The cell towers (that provide phone signal) are sitting on the earth, just like you, and so move at the same speed as you. This might be a concern with satellite phones using Low Earth Obit satellites but this isn't the case here.
I think the best thing to do would be to get in touch with your Phone Operator or Device Manufacturer for support. If you are out of the support period or can't get support from them for some other reason then a standard 'cure-all' for mobile phones is to do a Factory Reset. This will return your phone to its default factory settings and wipe all of your data / modifications off the phone. This tends to solve most problems and is probably what the official support team would tell you to do. I can't guarantee that it will help but it has a good chance.
There are instructions on resetting your phone here:
http://www.hard-reset.com/lg-optimus-elite-hard-reset.html
I hope that helps.

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

I purchased an iPad mini on October 10th. I want to return it and get the new ipad mini retina when it comes out. How do I do that if the new ipad mini release date isn't until "later in November", which is beyond the 14 days from my purchase date?

I purchased an iPad mini on October 10th. I want to return it and get the new ipad mini retina when it comes out. I am currently still within the 14 day return/exchange window but how can I exchange it if the new ipad mini release date isn't until "later in November", which would be beyond the 14 days from my purchase date? If apple announces a new version of a product you just purchased but won't actually release it for more than 14 days, how can you possibly exchange the one you just bought? Is my only option to return the one I bought on the 10th (so return by 10/24) and then not have an iPad until the new one is available for purchase? Or would it make any sense to return the one I bought, get a new one, which would presumably have another 14 day return window, and then exchange THAT one for the new ipad mini w/ retina when it comes out (hopefully within that second 14 day window)?

Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

PO released dates by releases ?

Similar Messages

Maybe you are looking for