PO Yet to be Send to Vendor

Dear All,
               PO printout is taken then it goes to the higher authority, then it comes back to user. In between they loose the Track .User requires that Printout has been taken, but not send to vendor .Is there any report we can get or any other alternative is there to achieve it.
I know that in ME9F we can get the report for list of Pou2019s for which printout has been taken or not,but this requirement is slightly different.
Any feedback .
Regards
Biswajit

I thnik you are not clear . Process is like this .
1. User Take the Pritout
2. Send it to Higher Authority for Sign off
3. In between they loose the Track ......
4. It doesn't mean that IF output has taken means  PO has been send to the Vendor .
In mE9F we can ger the list of Po's for which Po pritout has  been taken or not   ,but you can't get whether it has been send it to the Vendor.
Now I want the Report that Po has been sent to Venodr. As far as my knowledge is concerned this isn't possble in std. still I want to get the confiramation from other expert.

Similar Messages

  • I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

    I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

    To diagnose problems with Thunderbird, try the following:
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • My iPad 2 lost its mail after I upgraded to IOS8. It crashes every time I click on mail. Yet, I can send photos and forward things in outgoing mail.

    Lost my mail
    after I upgraded to IOS8. It crashes every time I click on mail. Yet, I can send photos and forward things in outgoing mail. how to restore?

    Answering my own question here. It's fixed! Another user recommended I switch to another wireless network then back to mine. And it worked! Mail is sending again with no problem.

  • I can download photos to my computer via my Ipod Touch but not a video of 833mb yet I can send it to my FB account on the same said device, does this make any sense?

    I can download photos to my computer via my Ipod Touch but not a video of 833mb yet I can send it to my FB account on the same said device, does this make any sense?

    See:
    iOS: Importing personal photos and videos from iOS devices to your computer
    Do y have XP? if so see that topic in the above link,
    Can you go to My Computer>iPod>DCIM folder and copy it from there?
    Windows XP can't import video files larger than 500 MB using Camera and Scanner Wizard. You can transfer these files from your device by selecting them in My Computer and dragging or copying the files to your computer's hard drive.

  • HT1414 If you lost your ipad and your years worth of insurance is not over yet can they send you a new ipad for free?

    If you lost your ipad and your years worth of insurance is not over yet can they send you a new ipad for free?

    No. Sorry. That year's worth of 'insurance' (which I'm presuming you mean the warranty) only covers manufacturer's defects. Theft is not an manufacturer's defect.

  • VMI scenario: purchase order confirmation send to vendor

    Hello Dear Sappers,
    I'm using message type ORDRSP (Idoc ORDERS05) for inbound idoc  for Vendor Managed Inventory, and it works. Then, once the PO is created in our SAP, the system automatically send a PO confimattion message to our vendor through message variant VMI in the partner profile for the EDI message category ORDCHG.
    The system, once the PO is created, send an automatically ORDCHG Idoc to the vendor. The problem is that the system send the PO confirmation before the PO is release/aproved. That is a problem. My requeriment is to send the PO confirmation Idoc to the vendor after the PO is release.
    This is my configuration:
    Partner profile:
    When a message of the ORDRSP type is processed, a purchase order is created for the vendor who sent the purchase order confirmation.
    When a message of the ORDRSP type is processed, a purchase order is created for the vendor who sent the purchase order confirmation.
    Partner no.          VENDOR_AG
    Description:          VENDOR AG
    Partner Type:     LI
    Message Type:     ORDRSP
    Message Code:     VMI
    Process Code:     ORDV
    Processing:          Trigger immediately
    Send Purchase Order confirmation number to VENDOR AG:
    Partner no.          VENDOR_AG
    Description:          VENDOR AG
    Partner Type:     LI
    Partner Function     VN
    Message Type:     ORDCHG
    Idoc Type:          ORDERS05
    Message Code:     VMI
    Receiver Port:     CI.SPARES
    Pack Size:          1
    Output Mode:     Transfer Idoc immediately
    Message Control     Application: EF; Message type ZPOC; Process code ME11 and Change message indicator set.
    I created the Output Type ZPOC but when I tried to added manually to the PO "Maintain outgoing EDI-connection data for partner VENDOR_AG.
    However the strange thing is that the system send the PO confimation IDoc ORDCHG anyway (without any Output Type). But send the Idoc inmediatly the PO is created (not yet release).
    My question here is: how can I only send to the vendor the IDoc ORDCHG only when the PO is release?
    Thanks a lot to all
    Fred

    Hi,
    This problem was solved. I had to remove the message variant VMI from the partner profile. Keep the message type ORDCHG but without VMI variant. And with that way, the system do not send the Idoc after the PO is created. SAP send the Idoc after the PO is release and do it by Output Type determination.
    The key was to remove the message variant! Unbelievable!
    Thanks to all.
    Fred.-

  • Approved payment proposal send to vendors through email

    Hi All,
    We want to send the payment advice to vendors via e-mail as soon as the payment proposal is approved.
    We have the workflow here, once the payment proposal has been created, it will go for the approval.
    the approver will approve the proposal if it is okay.
    so, once this proposal has been approved, the payment advice should send to corresponding vendors through email;
    Regards,
    Shwetha

    Hello,
    You can control whether a payment advice note is to be sent by e-mail via BTE interface 00002040.
    The Function Module Sample Process is SAMPLE_PROCESS_00002040 which you
    can find by using transaction BERP. You can use this Function Module as
    a reference for the BTE and find instructions for setting up the
    interface.
    Note 407827 and1033893 provide good hint on how to achieve your business needs. Furthermore, I'd suggest you to send payment advices after payment run and not after proposal run.
    REgards,
    REnan

  • PO send to vendor through e-mail

    Hi All,
    while sending the PO to vendor through e mail, some POs sent to vendor. but some are not. I have seen the in the vendor master address screen the e mail is correct.
    And i have seen the messages in PO , the medium 5 (external send) is also maintained for the all POs which is sent and not sent.
    So please guide in this in which part the error will be possible
    Thanks in advance
    with regards
    Allen

    Follow this
    Basically there are two mail types: Internet mail (external mail) and SAPOffice mail.
    Mail is sent via the output determination in both cases.
    If you use the external mail, the message for the purchasing document is converted into a corresponding text file which is sent to the vendor via the Internet.
    SAPOffice mail is sent only within the R/3 System and has mainly the function of providing information.
    In particular, it is not possible to attach a message (form) for a purchasing document to a SAPOffice mail.
    When using external mail, the following basic settings are required:
    1. You must maintain an e-mail address in the address in the vendor master.
    2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
    o Note that it is not possible to change the e-mail address of the vendor
    o You can use a temporary email address in Transaction ME21N.
    3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail.
    You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define
    Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
    4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
    5. In the condition records for the output type (for example,Transaction MN04), use medium '5' (External send).
    6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been
    carried out.
    7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
    To use the SAPOffice mail, the following basic settings are required:
    1. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail.
    You can branch to the maintenance of the communication strategy via the input help.
    2. Use the SAP standard environment (program "RSNASTSO" and FORM routine "SAPOFFICE_AUFRUF") as the processing routines.
    3. In the condition records for the output type (for example,Transaction MN04), use medium '7' (SAPOffice) and also partner role 'MP' (mail partner).
    Additional settings:
    Problem:
    How can you both change the mail title and text for the sending of a mail message and maintain a replacement parameter, for example a document number.
    Solution:
    1. The replacement routine is maintained in the Customizing for the output type in the detail screen on the 'General data' tab under 'Replacement of text symbols' (for Release < 4.6B, this can be found on the 'Mail' tab page).
    Program: SAPMM06E
    FORM routine: TEXT_SYMBOL_REPLACE
    2. Maintain mail title and text.
    o If you want to send a purchase order within an R/3 system using the SAP office, you can maintain both the mail title ('Re:') and also a mail text in the Customizing for the output type To do this, select the directory mail title and text for the corresponding message type.
    o If you want to send a purchase order as (external) mail, for example, to a vendor, you have to maintain the mail title in the condition record for the output type (for example in Transaction MN05) on the 'Communication method' tab page. Enter the mail title in the 'Text for cover page' field. You cannot maintain an additional mail text.
    o Note that the values from the mail title are used to create the description for the attachment.
    3. The replacement parameters must be enclosed by &. Example: You want to enter the title 'PO number '. For this you have to enter the following in the Document Title field (Message Customizing ->
    sub-option: Mail title and texts) 'PO number &EKKO-EBELN&'

  • PO output sending to vendor via email by PDF Format

    Hi All,
    Business needs to send the PO output in PDF Format to multiple vendor contact via email. They also needs soem text in the body of the mail.
    Is it possible to config via standard SAP or we need to develop a customed program?
    Suppose If it is possible via standard SAP can some one post the detailed steps.
    Thanks in Advance
    Regards
    Karthick

    External Send - Sending PO by email
    In order to send PO, your Basis team must configure the system first so that external email can be send out from SAP.  If it is not configured, no settings you do on MM will work.
    1. You must maintain email address in vendor master data.
    2. The same applies to your user master data.  For the output type for default values, a communication strategy needs 
    to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the 
    Customizing via the following path: 
    (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). 
    As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
    3. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
    4. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
    5. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
    6. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node

  • PDF format PO send to Vendor

    Hi,
    Once we created ME21N or released the PO from ME29N, system should sent a mail with attachment of PO in PDF format to Vendor,
    1) If vendor did not get the mail or attachment, then Buyer should get the mail,
    2) if Buyer get the mail. he will process the mail once again , send the email to vendor with attachment.
    3)How we come to know about the vendor has successfully received the mail with attachment of pdf format PO.?
    How we proceed this development and how to get?

    Hi,
    Check Sap note 191470
    Goto NACE .
    u2022 Select EF and click on OUTPUT TYPES.
    u2022 Then select Output Type NEU and click on processing routines .
    u2022 In that you have to add a new entry - medium 5 .
    u2022 Then you need to assign a program, form routine and form.
    u2022 You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
    u2022 Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
    u2022 For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
    u2022 Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as TEXT_SYMBOL_REPLACE .
    u2022 Now the subject will be PO No. 1800004202.
    u2022 You need to maintain your email id in tcode SU01 and also the vendor's email id.
    u2022 Now while creating a new purchase order , change the medium to External Send .
    u2022 Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
    u2022 Goto tcode ME9F .
    u2022 Execute.
    u2022 Select the checkbox and click on Output Message.
    u2022 You will get a message MAII 00000000000123 generated.
    also check,
    go to MN04
    here give the condition as NEU
    choose key combination as Purchasing Output Determination: Document Type
    select doc type and partner function as VN vendor mediuam as 5 external send
    select communication here strategy give as CS01
    For subject of the mail go to Mail Title and Texts. In title give PO No. &EKKO-EBELN&
    Also if you want to convert PO in PDF format :
    Get spool request in SP01
    Then go to SE38. Program name: RSTXPDF4 Execute.
    Give the spool number & execute.
    PDF will be created for PO.

  • Surveys does not send to Vendor.

    Hi SRM community.,
    I am settup the ROS scenario, let me explain my problem in srm 7.0 scenario classic extended scenary
    1.- vendor link into ros_selfreg  and create the registration process(ok no problem)
    2,. prescree process the user review the  petition and accept and send the mail with the surveys. the system show and green status and sucessfull process.
    problem or question.  
    into the SOST transaccion I can not see the e-mail with the survey or link. its working that way.
    thanks. I am appreciate your valuable time.

    Oscar,
    Pl run the report UXS_ADD_MISSING_XSLT_NAME.
    The earlier settings I mentioned were for sending user id and password mails.
    Regards,
    Nikhil

  • Mm: debit note , send to vendor for compensation of money

    dear mm-gurus,
    i m facing a problem.
    i m not aware about the process of debit note that is sent to vendor for compensation of money
    for the quantity of rejected material on quality basis and line rejection basis.
    please help me out,
    useful reply will be awarded..
    please give me the detailed procedure for this.
    thanks:
    piyush singh

    Hi Piyush,
    1.Created the PO say for 10 qty.
    2.Done  the GR  say for 5 qty.
    3.Do the Invoice for 10 qty.
    4.Now qualityDept has rejected 5 qty & want  to send to the respective vendor.
    5.Now you can create the Credit Memo for  5 qty and send to the vendor.(not Debit Memo).
    Further you can refer
    http://help.sap.com/saphelp_46c/helpdata/en/a8/b99f58452b11d189430000e829fbbd/frameset.htm
    I hope u understand the process..!
    Rahim

  • Supplimentary invoice send by vendor

    hi,
    how to post supplimentary A/P invoice.
    suppose i have procure one material with pricr Rs 1 today ,so for 10 qty vendor sendmi invoice of rs 10, but at the end of the month raw mat price increases i.e Rs 2 , so again for 10 qty vendor send mi one more invoice of Rs 10 with ref to main invoice,so how i will enter that invoice in system with resoect to that po.
    for Supplimentary A/P invoice only part II (A&C) will update,because we r not receiving any physical qty st the time of supplimentary invoice so part1 will not update.
                                thnx.

    hi,
    thnx for reply,  dear friend whatever varun has given is some how from excise point of view it is wrong,
    how i will tell u,
    First he said that make A/R credit memo,credit memo is created when u r cancelling the invoice,so in our case we cannot cancel the invoice as it is tax invoice and u have already given to customer,u cannot cancel it and if u have taken cenvat credit then u cannot cancel it.
    Second solutn he has given that to creat one non stock item and make delivery of that item, create outgoing invoice and then A/R, this is also not possible again from excise point of view,see when u have dispatch the material first time at that time also u have done excise register entry, and noew at the time of supply inv,u r not dispatching any material ur just creating invoice no physical dispatch of material, so rg1 should not be update again.

  • PO should be send to vendor (PDF)as soon it is approved and print hard copy

    Hi,
    I have 2 requirements as below
    1) The PO should be send to the vendor in PDF as soon as it is released to the e mail id of the vendor maintained in the vendor master. Also a hard copy of the PO should  get printed.
    2)if the PO does not require a approval ,PO should be send to the vendor as soon as it is saved & print hard copy.
    Hi gurus can you pl tell me the stepwise config to be made.
    KN

    Hi,
    I just came across your post about Sending PO to a vendor through e-mail with PDF attachement.
    I have a similar issue on hand.
    My Program name - Z_SAPFM06P
    Routine - ENTRY_NEU
    Form - Z_MEDRUCK
    My requirement : After creation of a PO, on click of 'Save' button, an e-mail needs to be sent to a given receipient.
    As of now, I have included the code in the routine - ENTRY_NEU and I'm facing probelms with the FM - SO_NEW_DOCUMENT_ATT_SEND_API1.
    Pls let me know what exactly is the codeand where to I need to include it. Pls tell me how to go about tis issue step-by-step.
    In general you will have to do the following:
    1) Set NAST-NACHA = 8 (Special function)
    2) Before OPEN_FORM (maybe in In enhancement spot) if NAST-NACHA = 8, then set itcpo-tdgetotf = 'X' (to get OTF back from CLOSE_FORM!)
    3) During CLOSE_FORM, if NAST-NACHA = '8', get OTF output from TABLES parameter OTFDATA
    4) Convert this OTF output to PDF using following sample code:
    data: I_PDF STRUCTURE  TLINE occurs 0,
            I_OTF i_otf LIKE itcoo OCCURS 0.
        CALL FUNCTION 'CONVERT_OTF'
             EXPORTING
                  format                = 'PDF'
                  max_linewidth         = 134
             IMPORTING
                  bin_filesize          = w_bytes
             TABLES
                  otf                   = i_otf
                  lines                 = i_pdf
             EXCEPTIONS
                  err_max_linewidth     = 1
                  err_format            = 2
                  err_conv_not_possible = 3
                  OTHERS                = 4.
    5) Send email with PDF attachment using the method(s) mentioned in one of these excellent blogs:
    /people/thomas.jung3/blog/2004/09/07/sending-e-mail-from-abap--version-46d-and-lower--api-interface
    /people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
    pherasath

  • Rejecting materail send to vendor

    hello guru
       I have some dout in my mind i  want discuss with u regarding
    we would send one PO to vendor , after that we had receive material from him with excise invoice , we  had clear invoice also (paid every thing), settelement was over
    now iam the owner of tha materail.
    today we found that quality of materail is not good , so  we r rejected all materail from my company,,, ok  vendor also agrees to receive materail,
    then how u delete first made excise , how u going to create excise invoice to vendor, how u going to send materail to vendor with excise plz tell me in detail
    regards
    sapman

    Other Outward Movements
    Use
    In the standard procedure for creating outgoing excise invoices (see Sales from Factories), the excise invoice is created with reference to a delivery note or an invoice. The system also allows you to create an excise invoice with reference to various other documents, as follows:
    ·        Goods issue documents (for example, transfer postings)
    ·        Vendor excise invoices (for when you return faulty goods to a vendor, for example)
    ·        Factory excise invoice (for sales returns)
    In addition, you can create an excise invoice without reference to any document at all.
    Prerequisites
    You have specified, per excise group, whether you want to create these excise invoices in one or two steps (see below). You do so in Customizing for Logistics – General, by choosing Taxes on Goods Movements ® India ® Basic Settings ® Maintain Excise Groups.
    You have also specified the maximum number of items allowed per excise invoice, in Customizing for Logistics – General, by choosing Taxes on Goods Movements ® India ® Basic Settings ® Maintain Excise Registrations.
    Features
    Depending on your Customizing settings, you create excise invoices in a single step or in two steps, as follows:
    ·        In the two-step procedure, the excise clerk first creates the excise invoice, but no postings are made. An excise supervisor then verifies that the invoice is correct and, if so, posts it.
    ·        If the excise clerks are more experienced, you may want to use the one-step procedure, which is quicker, but more prone to error.
    In this case, when you create an excise invoice, the system automatically posts it in the background.
    Note that the functions for creating and canceling these excise invoices are different from those for other excise invoices.

Maybe you are looking for