Policies and Passcodes

I've created a policy for user access to VPN and WiFi. Those two parts work. I included a passcode requirment with the following parameters.
Require passcode - Checked
Allow simple value - Checked
Require alphanumeric value - Not Checked
Minimum passcode length - 4
Minimum number of complex characters - 0
Maximum passcode age (in days)- 0
Passcode lock (in minutes) Disabled
Maximum number of failed attempts - 7
During user import the users get prompted for the passcode setup. No matter what the passcode, the numeric keypad is disabled and the alphabetic keyboard is displayed. Four users were only able to enter passcode consisting of letters and only 4 characters long. Adding numbers or characters results in an error wrong passcode. One user was able to retain his 5 character number only passcode without issue. On my test system. 8557 is invalid as is any 4+ numeric sequence. Mp8557 also is invalid. mpie is valid.
The buggiest things are the inconsistencies. I reloaded the profile. I can now create a wider range of passwords than I could when I started typing the thread. I changed my passcode to 8557 and it accepted that. It also changed back to the numeric keypad. But now I can't create an alphanumeric password. Is anyone else having these issues?

On my settings, I have:
*Minimum number of complex characters - <blank>*
*Maximum passcode age (in days)- <blank>*
instead of zero. I don't know if that makes the difference or not.

Similar Messages

My iphone has been lost in spain what can I do besides make a complaint to the police and lock it with the located iphone ?

my iphone has been lost in spain what can I do besides make a complaint to the police and lock it with the located iphone ?

The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, all a thief or whoever finds it has to do is force the phone into recovery mode & restore it. While this deletes all data on the phone, it also removes the passcode so the phone can then be used as a phone or touch.

Ipad asking for apple id and passcode after restore i do not have these what to do please... ive tried everything its my ipad i have recipt

i brought an ipad for my daughter 2 years ago i have had to restore this due to her entering the wrong passcode few times as she is only 8 i have done all that was asked now its asking me for the apple id and passcode i have entered all the ids and passwords i can think off the hint of id has gave me no clue at all i have been trying to do this all night its her birthday tomorrow and i need it unlocked i have recipt is there anny way at all thank you

Perhaps you have been given the incorrect user id deliberately.
If this is the case and the phone won't work, then you are stuffed and there is nothing you can do. You will never be able to use the phone again, so cut your losses and return it for a full refund and buy a new phone from a legitimate source next time.

I left my iPhone in bathroom last night and it was gone this morning. I notified the police and no one has turned it in. How do I find it and how do I find my serial number. I went to iTunes on my macbook but could not find a preferences or devices tab

I left my iphone in a bathroom last night and it was gone this morning when it was unlocked. I notified the police and no one turned it in. How do I find where it is located? Also, how do I find my serical number? I went to itunes on my macbook but could not find a preferences or devices button. Finally, I know my password but don't know my apple id. How do I find it?

Answered here:
https://discussions.apple.com/thread/6157706?tstart=0
Don't double post.
To locate the SN:
http://support.apple.com/kb/ht4061

Converting a delete statement using VPD policies and context

Hello,
I'm trying to convert a delete statement in a update statement using VPD policies and context.
+/* Supose the user 'user1' already exists. This is an application user */+
conn user1/pwd
create table user1.test_a (
id                number(4),
description       varchar2(100),
deleted           number(1)
+);+
alter table user1.test_a add constraint test_a_pk primary key (id);
insert into user1.test_a (1, 'abc', 0);
insert into user1.test_a (2, 'def', 0);
commit;
I'd like to convert each physical deletion into a logical deletion: statements like "delete from user1.test_a where id = 1" must be converted into "update user1.test_a set deleted = 1 where id = 1".
I've found the following way: I will create a policy to avoid physical deletion. Additionally, the policy function should update the deletion flag too.
conn user1/pwd
+/* Create context package */+
create or replace package user1.pkg_security_context is
procedure p_set_ctx(
i_test_a_id      in   user1.test_a.id   %type
+);+
end;
+/+
create or replace package body user1.pkg_security_context is
procedure p_set_ctx (
i_test_a_id      in   user1.test_a.id   %type
+) is+
begin
dbms_session.set_context( 'user1_ctx', 'test_a_id', i_test_a_id );
end;
end;
+/+
show errors
+/* Create trigger to set the context before deletion */+
create or replace trigger user1.test_a_bef_trg
before delete on user1.test_a
for each row
declare
pragma autonomous_transaction;
begin
-- only commits the preceding update, not the delete that fired the trigger.
commit;
user1.pkg_security_context.p_set_ctx( :old.id );
end;
+/+
show errors
create context user1_ctx using user1.pkg_security_context;
+/* Policy function */+
create or replace function user1.f_policy_chk_dels (
object_schema in   varchar2,
object_name   in   varchar2
+) return varchar2+
is
out_string                 varchar2(400)   default '1=2 ';
+/*+
* out_string is the return value.
* - 'WHERE 1=2' means 'nothing to access'
begin
if ( loc_logged_usr_authorized > 0 ) then
+/*+
* Set the flag deleted to 1
update user1.test_a set deleted = 1 where id = sys_context( 'user1_ctx', 'test_a_id' );
out_string := out_string || 'or 1=1 ';
end if;
return out_string;
end;
+/+
show errors
+/*+
* Create policy
begin
dbms_rls.add_policy(
object_schema   => 'user1'                   ,
object_name     => 'test_a'                  ,
policy_name     => 'policy_chk_dels'         ,
function_schema => 'user1'                   , -- function schema
policy_function => 'f_policy_chk_dels'       , -- policy function
statement_types => 'DELETE'
+);+
end;
+/+
When I try to delete a record of the table test_a:
conn user1/pwd
SQL> delete from ilogdia.oplsimulaciones sim       where sim.id = 9999;
+0 rows deleted+
No rows has been deleted, but the update stmt does not work. That means, the "deleted" flag has not been updated.
Any ideas?
Thank you in advance.
Marco A. Serrano
Edited by: albrotar on Oct 15, 2012 8:42 AM
Edited by: albrotar on Oct 15, 2012 8:42 AM
Edited by: albrotar on Oct 15, 2012 8:43 AM

The policy function is applied once per statement execution. The policy function executes first and the UPDATE statement, presumably, updates no rows because the context is not yet populated. The row-level populates the context (I'm assuming that your session can even see context values populated by an autonomous transaction-- I would guess it could but I'd have to test that) after the UPDATE statement is already complete. The COMMIT in the row-level trigger is also pointless-- it only applies to changes made by the current autonomous transaction, of which there are none-- it cannot apply to changes made in other autonomous transactions. Declaring the row-level trigger to use autonomous transactions doesn't seem to accomplish anything other than to open the question of whether the values set in the context by the autonomous transaction are visible in the caller's transaction.
Even if this, somehow, did work, using autonomous transactions would be a very bad idea since Oracle is free to roll-back a partially executed statement (and the work done by its triggers) and re-execute it. Oracle does that with some regularity to maintain write consistency.
Justin

HT5463 my incoming calls will not ring when locked. how do I get rid of the lock screen and passcode for good?

I have mu phone set up on locked screen and passcode. I want to take this off. I am unable to receive calls in locked screen.
I need to hear all my incoming calls.

Double check settings - do not disturb - is off.

My ipad was stolen. I reported it to the Toronto Police and put it as lost mode. Now what?

I reported it to the Toronto Police and put it as lost mode. Now what?

If the iPad was running iOS 7, the thief will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

Install user name and passcode,still not OK to install FLASH PLAYER!

I download FLASH PLAYER,but when I install it, it need me to input my user name and passcode, I done, but still cann't get through it.
I have my own user name and passcode in ADOBE, but seems it is not match the Install FLASH PLAYER request, now I cann't open website any video.
Pls help!

There are countless topics here on this same page with the same question: you need to enter your computer's administrator id & password.

Apple TV 2 does not accept my Apple ID and passcode to turn the home share on. Help me!!

Apple TV 2 does not accept my Apple ID and passcode to turn the home share on. Help me!!

start here: Troubleshooting Home Sharing with Apple TV (2nd generation).

HT1695 Forgot network and passcode for i pod touch

I have forgotten my network name and passcode for my i pod touch. What do I do??

Ask the person(s) responsible for that network.
Or reset the network password. For the latter, download the manual for the router to find out how to do that.

Understanding (default) archiving and retention policies and tags

I am taking a look at archiving and policies and tags and am a bit confused.
If I look at the "Default Archive and Retention Policy", I see a lot of Tags assigned to this policy. On the Mailboxes tab, I see no mailboxes listed.
although no mailboxes are listed in there, are all users that (will) have archive enabled still using this default Policy?
I see a lot of Personal Tags in there assigned. 1 Month Delete, 1 Week Delete; Are all these tags active, or is the list you see there all tags that a user CAN personally use and assign to his folder?
For example, what does the tag do: "1 Month Delete", Personal Tag, Delete and Alllow Recovery, Age limit for Retention 30, Retention Enable True?
there is also a tag called "Default 2 year move to archive", with type All other folders in the mailbox. Does this mean that all users that have this policy assigned, that all their mail older than 2 years will be moved to their archive? Or can
the user enable this tag?
The longer I look at this list, the less I understand.... Maybe someone can give a short explanation?
Thanks!
Olaf

Hi,
For the question 1:
Yes. Exchange Setup creates the retention policy Default Archive and Retention Policy. When you enable a personal archive for a mailbox, the Default Archive and Retention Policy is automatically applied to the mailbox if it doesn't already have a retention
policy.
For the question 2:
Users can apply these personal tags to folders they create or individual items.
For the question 3:
First, we should know what the "Delete and Allow Recovery" retention action do.
Delete and Allow Recovery: This action emulates the behavior when the Deleted Items folder is emptied. Tags that have this action applied are known as deletion tags. When this action occurs, and deleted item retention is configured for the mailbox database
or the user, messages move to the Recoverable Items folder. The Recoverable Items folder (previously known as the dumpster) provides the user another chance to recover deleted messages.
So about the tag you mentioned above, it's a personal tag, when a mailbox item reaches its retention age(here is 30 days), the items will be deleted in the source folder and moved to the Recoverable Items folder.
For the question 4:
If you choose the type "All other folders in the mailbox", then this would be a Default Policy Tag (DPT). This DPT is applied to all other items where a RPT is not applied.
For example, if you have created a retention policy tag and apply it to default folder Inbox, then Inbox folder won't be affected by a default policy tag whose type is "All other folders in the mailbox".
Please note that a mailbox can't have more than one retention policy. If you later apply a retention policy to the mailbox, tags from the Default Archive and Retention Policy are no longer available to the mailbox.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Can apple help me find my iPod touch 5g??? I have already reported it to the police and they haven't called back, i also have the find my iPhone app in it but I don't have the location thingy turned on so what else can I do to locate it pleazz help

Can apple help me find my iPod touch 5g??? I have already reported it to the police and they haven't called back, i also have the find my iPhone app in it but I don't have the location thingy turned on so what else can I do to locate it pleazz help this iPod is relly valuable to me I had gotten it for Christmas and now I proved that I can't be trusted with it HELP :c

Police don't "track down" lost items, per se. They'll keep your information on file in the event that someone finds your iPod and turns it in. Otherwise, there's nothing the police can or will do in regards to finding lost property.
Sorry, but your iPod is most likely gone for good.
Regards.

Is Cisco Nexus 5596UP support vlan base Policing and traffic shaping on code NX OS version: 5.1(3)N1(1)

Is Cisco Nexus 5596UP support vlan base Policing and traffic shaping on code NX OS version: 5.1(3)N1(1)
where i couldn't see any police command under the policy map

I have tested this issue on another 5548UP with L3 running the same NX-OS version and get the same problem. Show CDP from the switch is not discovering devices, but the neightbors can see the 5K in question. Reboot sometimes will fix it, but not always. I suspect a problem with the software since that doesn't happen in NX-OS 5.2. The one I am using is
Software
BIOS:      version 3.6.0
loader:    version N/A
kickstart: version 5.1(3)N2(1)
system:    version 5.1(3)N2(1)

Auto-Lock and Passcode Lock

So even though I'm not the dumbest rock in the box, I cannot for the life of me understand the difference between auto-lock and passcode lock. When I go into settings and then into general, I have set my phone to auto-lock at 5 minutes. I also have set a 4-digit passcode, but I don't understand what the "after 1 minute" setting means. What am I missing? I've read p. 98 of my user's guide over and over, yet I still don't get it. Thanks for any help and for resisting comment on my learning curve.
imac / ibook / iphone Mac OS X (10.3.9)

So would my 5 minute passcode lock "override" the 1
minute auto-lock?
There is no 5-minute passcode lock. You have them backwards.
Auto-lock (which is more like "sleep") is the one that has the various times you can select. But the screen does "lock," in that you have to swipe your finger across the screen to "unlock" it.
Passcode lock adds the 4-digit code to the process. The time you've specified for Auto-lock (1-5 minutes) still applies. The display will go to "sleep" (i.e., "auto-lock") within that amount of time.
But say you've just put the phone down temporarily -- right in front of you, while you're doing something else -- and you see it go to "sleep." Do you want to have to enter your passcode immediately, or do you want a 1-minute "grace period," giving you the chance to pick up your phone and "wake it up" without having to enter the code? That "grace period" is what "After 1 min." means on the Passcode Lock page.

Sysvol directory contains two policies and scripts

Hello,
I have a question
Why I have two policies and scripts under my AD Sysvol?
Omar A. G. Dweik Senior System Engineer Qatar - Doha

Hello,
Thanks for your quick replay
what version of AD are you using? Windows 2008 R2
someone manually create Policies and scripts folders on another DC? yes
Have you seen any errors in the logs for FRS replication on any of your DC's? I will check
Thanks
FZ2H
why did someone manually create the folders? this shouldn't be needed and will be what has caused this issue
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Policies and Passcodes

Similar Messages

Maybe you are looking for