Pop up error message "Sorry womething went wrong. wait a few moments then retry."

I am having an error message pop up repeatedly on my HTC Droid Incredible saying "Sorry something went wrong. Wait a few moments and then retry. If possible persists, try logging in" Nothing stops it and log into what? Happens on texts, facebook, email, google search - anything. Apparently I am not only one having this problem if you google the issue. Took it to Verizon Store this morning and they did a soft reset which appeared to help for very short time but now it is back again. If I am on a phone call it will stop the call.
First problem I have had but getting to be too much. Customer service suggested a new phone but because it appears to be happening on all brands that will not help the problem. Also suggested using insurance but that, too, would NOT help this.
What is going on? What account are they referring to about logging in? Facebook? Google?, Email? Not sat and time for an answer that works

fjpor4321,
Sorry to see you have been getting an error message. Let's see if we can get to the root of what is causing that message. When does this problem occur? Is just when you are on a call or when doing other things? Place the device in Safe Mode: http://vz.to/1ov60Js . Does the problem persist in Safe Mode?
BrianP_VZW
Follow Us on Twitter @VZWSupport

Similar Messages

I purchased the movie The Avengers but when I try to download it to my iPad, I keep getting error messages. What went wrong?

I just purchased the movie The Avengers from my iPad. It took a while to download, but then I would get a error message that download isn't complete and to retry. I'd retry and the same message would pop up again. What went wrong?
Thanks.

While you can redownload most past purchases without charge, you can't redownload movies without paying again. See Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519

When trying to log into my mailbox I can not do so I get an error message saying "something went wrong try later" is the fault at your end?

I am running Firefox instead of "I E" thinking it was less prone to freezing.
I have "Bing" as my browser. I try to log into my outlook inbox as I normally do but I get a message on screen saying SOMETHING went wrong please try later, What & by whom?
It was working earlier now after waiting then trying several times I still cant.
When I have downloaded "Firefox" it also installs maintenance how do I do such a task when I can not find out where I should do so.
I went to my Yahoo account to see my newsletter from you, there I am able to install the latest "Firefox"
thinking that by doing so I could enter my outlook mail BUT NO

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Sorry, something went wrong and word was unable to start (2)

I have been using office home and student fine until now when it will not open, at first it would say it was unable to open with error message 40 now it is error message number 2, I have no idea how to open it.
help please?

Hi,
Is the complete error message "Sorry, something went wrong and Word was unable to start. (40)" and “Sorry, something went wrong and Word was unable to start. (2)”?
I agree with Sunil Shrikant Vyasasamudra. First you can repair Office from Control Panel > Programs and Features, maybe Office installation is corrupt.
If it doesn’t work, you can try “Fix it” tool in the KB below.
http://support.microsoft.com/kb/2827031
If there is anything else I can do for you on this matter, don't hesitate to tell me.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Sorry, something went wrong and word was unable to start (40)

so recently, my ms word has not been working at all. It doesn't work, whether I open a new document or an existing file, and it shows the error message 'sorry, something went wrong and Word was unable to start. (40). It only started to show up recently,
and i was wondering if it was because i have not yet updated to the latest version of Windows 8, which i have been unable to do successfully. I have already tried to open in safe mode, and the fix it tool. Does anyone have any idea what i can do?

Did other programs work well?
Repair your Office suites in Control panel>Program and features>Office>Change>Repair
If the repair doesn't work, please uninstall the current installed Office, and reinstall it again.
To uninstall the Office, follow the instructions in the following support article:
http://support.microsoft.com/kb/2739501
Tylor Wang
TechNet Community Support

MS Word 2013 unable to start. "Sorry, something went wrong and word was unable to start. (6)

I am trying to open MS Word 2013. I have purchased the MS Office online and pay a subscription. When opening MS Word, it comes up with the error message "Sorry, something went wrong and word was unable to start. (6)" This appears to be happening
with all MS office applications. Can someone please help?

I faced this same problem and reinstalled office several times but no luck, then followed below steps and got my issue resolved:
Solution is that you run word in "Administrative" mode:
To run the Word program in administrator mode, try the step below:
· go to Computer, Programs files/Program files X (86).
· Look for Microsoft Office ->Office 15.
· Look for Winword.exe
· Right click on it and click
Properties
· Click on the Compatibility tab
and check the box forRun as admin.
· Clickok.
Ref: http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/unable-to-open-word-sorry-something-went-wrong-and/aa080850-1fe3-46b5-8338-905633e8f9a0

Office Web Apps Issue - "Sorry, something went wrong" message when opening a document (any MS docx,ppt etc) in IE. With Chrome, it pops (Microsoft Office needs your permission) message and on RUN, it opens the document.

When opening any Microsoft documents ( docx, ppt etc) in SharePoint 2013,
Internet Explorer behavior : "Sorry, something went wrong" An unexpected error has occurred message and then nothing happens.
In Chrome : Pops (Microsoft Office needs your permission) message and on clicking RUN, it opens the document.
In Firefox : the documents opens, after asking which application do you want to use to open it.
The feature (Open Documents in Client Applications by Default) is not activate.
Why the MS documents are not working in IE 10?

Hi,
According to your post, my understanding is that you failed to open Microsoft documents in SharePoint 2013.
I recommend to Run the following PowerShell in OWA Server :
Remove-OfficeWebAppsHost # To Remove any restriction
Or
New-OfficeWebAppsHost -Domain <String> # To allow specific domain Name
In addition, you can allow OAuth via HTTP using the following commands:
$config = (Get-SPSecurityTokenServiceConfig)
$config.AllowOAuthOverHttp = $true
$config.Update()
Here are two similar articles for you to take a look at:
http://blogs.msdn.com/b/fabdulwahab/archive/2013/10/30/office-web-apps-with-sharepoint-2013-issues.aspx
http://stevemannspath.blogspot.in/2013/03/sharepoint-2013-office-web-apps-issue.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error while editing Workflow Task List Item - "Sorry, something went wrong.. Web must contain a discussion list

I have an custom approval workflow and when I try to edit an assigned approval Task it throws me an error
Sorry, something went wrong
Web must contain a discussion list
Any help appreciated!
Pravs

Hi,
For a better troubleshooting, I suggest you do as the followings:
1. Check the ULS log for more detailed error message, for SharePoint 2013, the ULS log is located at the path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can use ULS Log Viewer to check the information in the log.
2. You can use fiddler to track if there is something wrong in the workflow request.
Here are some detailed articles about debugging workflow:
https://msdn.microsoft.com/en-us/library/office/dn508412.aspx
https://sharepointlogviewer.codeplex.com/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Search Error - Sorry, something went wrong

Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator. is the message that I get when I try to search.
The search application seems to be working just fine. I have all green checks in my Search Application Topology and my crawl log show successes and no errors. I also get an error when I try to create a Enterprise Search Center.
I am at a loss and any help would be appreciated.
Thanks

Hi,
Refer to the solution from Peter Filbin in the thread below:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/1522176a-8fe1-4b4e-94a9-a89595e069b4/sharepoint-2013-search-not-working-sorry-something-went-wrong-everytime-do-i-have-to-set-it?forum=sharepointsearch
Thanks.
Tracy Cai
TechNet Community Support

Error in Search results - Sorry, something went wrong. Display template had an error

I'm receiving this error in custom search results page in our SharePoint 2013 Enterprise farm:
Sorry, something went wrong.
Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types.
'console' is undefined (CoreRender: ~ sitecollection/_catalogs/masterpage/Display Templates/Search/Item_mycustom_Site.js
I believe a similar error was resolved by March 2013 CU but our farm us running Aug 2013 CU. I have also tried adding domain to trusted zone in IE but still the same error.
I do not get this error in Google Chrome or in IE 10 or above. Not sure if it is an issue with my display template because error disappears when upgrading IE to 10 or 11.
Update: In IE 8 I can see search results with no error if the developer toolbar (F12) is enabled!
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

Hi ,
Did you try these steps
Open up the SharePoint 2013 Management Shell as Administrator
and run the following command: Enable-SPFeature SearchWebParts -url http://<central admin
url>
Use a browser on a different machine, or add you SharePoint
site(s) to the ‘Trusted Sites’ in IE.
Activate the feature : “My
Site Host“. This is a hidden feature scoped at the Site Collection level. The feature ID is 49571CD1-B6A1-43a3-BF75-955ACC79C8D8.
The feature folder under SharePointRoot is MySiteHost.
Install the update: http://www.microsoft.com/en-in/download/details.aspx?id=36989
Here are some similar threads for you to take a look at:
http://sharepoint.stackexchange.com/questions/70452/query-builder-for-result-source-not-working-in-central-admin
http://www.thesharepointbaker.co.uk/sharepoint-2013-gotchas-2/
http://bernado-nguyen-hoan.com/page/2/
Ref:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/6e86cf3f-8001-4d13-a700-9e70d8828f03/controlsearchboxjs-not-found?forum=sharepointsearch

Sorry, Something Went Wrong, Unexpected Error Occurred

Having a very strange issue with main SharePoint 2013 Page after upgraded all the way from 2003 to 2013. Initially setup 2013 Web App for just http and I could log in with my user account and do all things for which there are assigned privileges. Then converted
to SSL and I receive the Sorry, Something Went Wrong error on the main page. No other user account we have tried has any problem whatsoever. This is currently an upgrade test environment but am very worried that we will encounter other users that have the
same problem on the main page or some other site page. Thing is, I cannot find a single log entry that contains the Correlation value in the error report and it is only when hitting the site using SSL. It does not matter what computer I am using (tried multiple).
The other users testing have no issues so far.
Additional testing. When I change back to http set in Public URLs I have no problems but others do. When set to https in Public URLs I have problem and they don't. However, I was the first and only one, other than farm account (which never has problems)
to work on the site using straight http.
Any help on this would be appreciated. I have scanned through table upon table in the User Profile database thinking there must be something in there messing with profiles or setting some sort of default but cannot think of a thing. App Pool needs to be
restarted in addition to IISRESET?

Are you talking about central administration (e.g. "main SharePoint 2013 page")?
if yes, make sure to set bindings in IIS to include a certificate, preferably a wildcard * cert. and then run
Set-SPCentralAdministration -Port 443
https://technet.microsoft.com/en-us/library/ff607832(v=office.15).aspx
If you're talking about your team site, for ex. make sure you set binding for https on the site in IIS and use a wildcard cert.
You can run a Merge-SPLogFile -Path c:\SP-error.txt -Correlation Input-Your-CorrelationID-Here and then paste the results on this blog and the group can help you, better if more info is provided.
If there is a correlation ID, you can get it with Merge-SPLogFile.
https://technet.microsoft.com/en-us/library/ff607721(v=office.15).aspx you may have to use start and end times.
Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com

Workflows completes but goes to "Sorry something went wrong" page

SharePoint Version: 2013
Workflow Version: 2010
My Title: Junior SharePoint Administrator
I have been working weeks on a project to use workflows for a business process. It is as simple as setting variables and sending email to people.
I have successfully created a site workflow and published it. When I start the workflow, it starts fine but then show me this (very annoying and always unhelpful) error --> Sorry,
something went wrong. An unexpected error has occurred.
Funny thing, the workflow stills completes fine and I get the email notification I created in the workflow! No errors messages in the workflow history either - completely clean.
Is there any reason for this? I am concerned since it will be used by a large group of people monthly and this is a huge "NO" for UX experience and usability...
I have tried linking the Correlation ID to anything and looking through server logs. I have got nothing.
Help please? :)

get the time that the error occurs, and recheck the log file that during this time, whether there is related information.
what's your workflow do? what's the result by using other user account to start the workflow.
Qiao Wei <br/> My blog:<a href="http://blog.goobol.com">http://blog.goobol.com</a>

SharePoint 2013 - Refiners "Sorry, something went wrong."

Good Afternoon,
I have an issue that has had me stumped for a couple of days now. I have a number of search results pages and on one of them and only one of them I am getting an error.
Whenever I add a refiners webpart and save the page everything works fine. However if I add or remove any refiners I get the infamous "Sorry, something went wrong." Whats causing my problems though is that when I click on Show Details there is
no correlation ID and I cannot see any errors in the ULS logs that might be related to this.
Using SharePoint Manager 2013 I opened the page properties and selected the webpart and I am getting the following message against "Effective Storage" and "Permissions" : Trying to use an SPWeb object that has been closed or disposed
and is no longer valid.
So in desperation I deleted the page and recreated it but the issue persists. The only thing different about this page and the other pages is that this page show people results. However if I change the query to use the "System Everything" results
source I still get the error.
edit:
I have just tried to amend the refiners on an existing page and I can amend them with no issues. I then created a brand new page and I get the same error. On my new pages I changed nothing except adding the search box / search results and refiners web parts.
So its an issue that does not affect existing pages only new ones..
More info: I have just created a new site on the same same site collection and created a page on this new site and I get the same issue.
Regards,
Brian Jones

Hello,
Thanks for your interest.
These are the steps:
1. Create a new page
2. Add the following web parts, Search Box, Search Results, Refiners. If I then just save and close the page everything works fine.
3. Edit the page
4. Edit the refiners web part.
5. Click on change refiners* select any refiner that is already added and remove it (any it does not matter).
6. Click OK on the web part properties. Immediately I get this issue. As you can see there is no correlation id in the error message.
7. Edit the refiner web part again and re-add the refiner I removed. Click on OK on the web part edit pane. The issue persists.
8. If I delete the refiner web part and re-add it the refiners web part works fine again unless I try and modify the selected refiners.
Please note this issue occurs if I add refiners as well.
Brian Jones

Project Online - Sorry, something went wrong when trying to load PWA

Hi All
When trying to load a Project Online instance (a new deployment in this case), we get the 'Sorry, something went wrong' error message.
I tried to provision another PWA site (PWA2), and the same error occurs.
Anybody seen this?

Hello,
Providing it has provisioned correctly in the SharePoint Site Collection admin page, there isn't a lot you can do other than raise a support ticket via the Office 365 tenant. If these are new blank PWA instances, try switching the permission modes, see if
that helps.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Pop up error message "Sorry womething went wrong. wait a few moments then retry."

Similar Messages

Maybe you are looking for