Pop-up menu(coustomised) inside graphs and plots

For my application it is to found that it would be more helpful if i can include a coustomised popup menu inside a graph rather than a default one.How can i make use such a facility in my application. please refer a solution
With hopefully
Rathesh

Hi
There are several ways to acheive your objective. In the past i was searching for similar things and i found following code snippets.
go through these codes and decide which one you should use. after that you must ake sure that the context menu apears only when you right click on the correct control (Not very difficult if you are using event structure)
Please let me know if you have any doubts
Tushar
[email protected]
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog
Attachments:
Pop Up Menus.zip ‏770 KB

Similar Messages

Can I have a pop down menu on the left and then text fields directly to the right? I can only get them to be one above the other.

Hi All,
I am building a form and would like to create a pop down menu on the left (and ideally with the options being colour boxes boxes but this does not seem possible), and then have three text separated text lines on the right of the pop down menu for notes related to the pop down choices.
Do you know if this is possible?
Thanks,
Matt

It sounds like you're creating the form in FormsCentral. You have limited options in the FormsCentral designer as far as layout. You can place multiple fields on a line, or one field per line. If you create the design/layout in a program like InDesign or Word, generate a PDF, and add the fields form in Acrobat, you have complete flexibility over the placement of the fields.
The items in a dropdown field are limited to text that are all the same color.

How Do i Make Graphs and Plots in Java

Hi,
I am a newbie to Java, and definitely brand new to the gaphics world.
I have a data file, which happens to be huge ( A text file size of 10 MB). This file contains some collected data. The data is divided into the very familiar two variable format.
I wanted to plot this data with one variable against the other in a 2D graph.
If some one coud lead me to the right direction, or help me out, i shall be thankful.
M

2D graphics tutorial

Pop-up Menu in Numbers unwrap and display in next column

I'm creating a row which will contain consecutive pop-up menus. The text is large for the cell (on purpose) but I'm hoping that the text can rollover into the next cell, but it won't do it. I've formatted the cell NOT to wrap, but it is hiding under the next cell. How can I fix it?
Thanks!

Two soluces:
(1) enlarge the column
(2) shorten the items
Yvan KOENIG (from FRANCE jeudi 15 janvier 2009 20:16:07)

Pop up menu and if function ?

i am try to do set a if function, but it keep getting error
there is a pop up menu in C1, Lunch and Dinner
if C1 = Lunch, Sushi tip out is 4%
If C1 = Dinner, Sushi tip out is 5%
=if(C1="lunch",(B9*0.04),(B9*0.05)
isn't working
can anyone help?
thx

Here is my suggestion:
C9=B9*(0.04+IF(C1="Lunch", 0, 0.01))
I think the only problem you had was that lunch in your formula was spelled "lunch" but was being compared to the value from the pop-up menu spelled "Lunch"... which is different

Behaviors Pop Up Menu

I have been using adding the behavior 'Show Pop Up Menu' to create a drop down list for my link menu. I add all the page links and upload. It works fine on the website. However if I try to change anything the next time I open the page in dreamweaver it has lost all the links.
In the events box I have still got On mouse out - hide menu etc but when I double click on On mouse over - show pop up menu all the links and text have dissapeared in the Contents section of the wizard part.
Can anyone help me with where I am going wrong. As everytime I want to make a change I have to re add all the pages and all the links.
Thanks in advance
Rachel

Thank you, I am using Dreamweaver MX.
I am a novice and have sort of understood that link you gave me! Basically does it mean that the show pop up menu behaviour is rubbish and there is no solution to my problem!?!
x

Strange Navigation Issues After Using Pop-up Menu

I have a Blu-ray project I'm working on. It's 1920x1080 resolution.
I have a main menu and then seven sub-menus as chapter-selection menus for three different videos.
The Main Menu has four buttons. Button one is a highlights video, button two takes the user to the first of three chapter-selection menus for the first video. Button three takes the user to the first of two chapter-selection menus for the second video and button four takes the user to the first of two chapter-selection menus for the third video. I have transitions from the main menu to each of the three chapter-selection menus and back from any of the seven chapter-selection menus to the main menu.
I also have a pop-up menu with the same four buttons on it as the main menu, except that the top button takes you to the main menu rather than playing the highlights video.
The problem I have is that all of the navagition works fine when moving around the menus, unless you open the pop-up menu during a video and navigate to one of the chapter-selection menus. When you do this, it works. It goes to the first page of the chapter-selection menu for any of the three videos, but if you then go to the main menu from there (each chapter-selection menu has a "back to main menu" button on it), it will play the transition, but then jump you to one of the chapter-selection menus for the video who's chapter-selection menu you were just on.
For example: If I play the highlights video and while it's playing I open the pop-up menu and choose Video 3, it will take me to the first chapter-selection menu for Video 3. If, once that menu comes up, I then scroll down to the "Back to Main Menu" button on that page and choose it, the transition from that menu to the Main Menu will play, but after it finishes, the Blu-ray will jump to the last chapter-selection menu page for Video 3. If I then navigate back to menu page 1 of the chapter-selection menus for Video 3 and choose the exact same "Back to Main Menu" button, the transition will play again and this time the Main Menu will open up.
The links for all of the menu buttons are correct, I've check them numerous times. It just seems that they get screwed up after you've navigated somewhere from the pop-up menu.
Sorry this is so long, but I wanted to try to explain it as best as possible.
Any suggestions?
Thanks.

Hey Shark. I read your explanation of what's happening, but I am not sure why you are having that weird navigation issue. There are a lot of weird anomalies that happen with Encore authored blu-rays, and things that just don't work that really should. For the price, it does the job, but there are limitations.
Last year when I started using it for blu-ray authoring, there were non-stop road blocks and things to overcome.
Check out the documented misery. It gets better at the end .
http://forums.adobe.com/message/3446748#3446748

Switching tables with a pop-up menu??

Hi all, I was wondering if it is possible to switch tables in a cell through a pop-up menu. To be more specific I have a pop-up menu in cell B9 and a table in E9 that works with the B9 pop-up. The table in E9 is A1-B30. I would like to make another pop-up that has 3 items in it that would switch out the table in E9 to reflect what has been chosen in the new pop-up. The info in B9 can stay the same. From playing around I have learned that you can not have the same cells in a table referenced if you have 2 pop-ups on the same sheet, you have to alter your table slightly to make it work. Any chance on this?
Thanks
Peter

I'm getting lost on the switching out part. You need to explain in more detail what you expect to happen. Switching out means nothing in a spreadsheet (at least in standard terminology).
What specifically happens when you change the new pull down?
You wrote "The table in E9 is A1-B30. " Huh? That looks like an equation, not a table. Plus you cannot store a tabel in a cell.
If you intend that the cell E9 has something like =My Table:: a1- My Table ::b30
And you want the MYTable part to change to a different table name, then you can use the address and Index functions to do this. Have address build the cell reference into a string referenceing your pull downs and the index takes that string and uses it like a standard equation.
Something like this:
=index(address(1,1,,,B10))-index(address(2,30,,b10))
This would takt the cell A1 on whatever sheet was selected in B10 drop down and subtract cell B30 from that same sheet.
Jason

Fireworks 8 pop up menu problem

My problem involves creating a pop-up menu in Fireworks 8 and
then when Iimport into Dreamweave 8, and then preview using
Firefox, or EI, the box gets cut off and the words hang off the
edge. I have the width and height specifications in Fireworks set
to automatic. When I preview in Firefox or EI from fireworks, it
looks great, so it almost seems it is something in the transition
from Fireworks to Dreamweaver. Anyone deal with this?

My problem involves creating a pop-up menu in Fireworks 8 and
then when Iimport into Dreamweave 8, and then preview using
Firefox, or EI, the box gets cut off and the words hang off the
edge. I have the width and height specifications in Fireworks set
to automatic. When I preview in Firefox or EI from fireworks, it
looks great, so it almost seems it is something in the transition
from Fireworks to Dreamweaver. Anyone deal with this?

XY graph multi plot live points and colour control

Hi All,
I'm trying to do something that should be simple but is proving to be difficult so far. I have had a good look through previous topics and found things similar but not actually what I want.
In my experiment I scan intensity vs wavelength.
Ideally I want to be able to:
1) run a scan and see the points plotted live.
2) Then I want the plot to stay on the graph when I run the next scan, etc.
3) I'd like to do an arbitrary number of scans. e.g. To initiate a scan I press a button, an arbitrary number of times.
4) I want to make it so that the current scan is plotted live in one colour (red), and all the previous scans remain plotted in another colour (blue).
5) Sometimes I may want to clear the graph of all scans and begin again, without having to stop the VI.
Items 1-3 can be taken care of easily by placing the Build XY graph and XY graph object inside the for loop that runs the scan, and unticking 'Clear data on each call' in the propertes of Build graph. See first attached VI.
However, at the beginning of a scan it joins the last point of the previous scan to the first point of the next scan.
The difficult parts are 4 and 5.
For item 4 you need to build an array of plots, which is easy if you know the number of plots, but here the number is arbitrary. So how do I do that? I've had a go by trying to use Insert Array in different ways but I haven't worked it out. Then hopefully using the XY graph property nodes I can set the colours of the plots.
For part 5 it is not enough just to use the invoke node = reinitialize to default, and have a button that executes the node. This clears the graph but then when you run the next scan all the previous plots pop up again, indicating that the array that stores the plots is not actually cleared. The second attachment shows how I'm clearing the graph.
My biggest problem is item 4, and combining item 4 and 5 together.
Please help.
Solved!
Go to Solution.
Attachments:
Current method_Items 1-3.vi ‏18 KB
Item 5 idea_with no item 4.vi ‏18 KB

The key is understanding the data type. If you hover over the graph's terminal, you will see that multiple plots are simply an array of single plots. Once you know that, something like this quick modification is fairly easy to come up with. I also added events to make it more readable. Note that this isn't actually a good way of doing things (for instance, you can't abort the drawing in the middle), but it shows the graph concept. You might wish to look at some code like producer/consumer designs.
As for the colors, you're right that the properties can help you there. I will leave it to you to figure out the exact properties, but when you start a new plot, you will basically want to reset all the others to white and make the new one red.
Try to take over the world!
Attachments:
XY Chart.vi ‏17 KB

Choose Plot Columns as Series or Plot Rows as Series from the pop-up menu in the bottom ba

I am trying to construct a 2D graph in Numbers 3.5 (2109) that shows at two time points the voting intentions by political party. The instruction given by Help is below, but I cannot find the bottom bar or the pop-up box.
Switch rows and columns as data series
When you add a chart, Numbers defines default data series for it. In most cases, if a table is square or if it’s wider than it is tall, the table rows are the default series. Otherwise, the columns are the default series. You can change whether rows or columns are the data series.
Select the chart.
Choose Plot Columns as Series or Plot Rows as Series from the pop-up menu in the bottom bar.
Bar showing options to plot rows or columns as series
Click Done.

Hi Phil,
Click once on the chart (graph) to select it. Then click on Edit Data References. The pop-up appears bottom left of the Numbers window.
Regards,
Ian.

Where is grapher pop-up menu (piecewise functions)?

Hi,
I am struggling to learn Grapher, and the only documentation I found is the help file.
I want to enter a piecewise defined function. The help file says:
1- Choose Equation > New Equation.
2- Choose Condition from the pop-up menu next to the Equation field.
3- Enter the number of conditions in the equation.
4- Enter the conditions and expressions in the template.
I am stuck a step 2: where is the said pop-up menu? I tried the equation column on the left. The contextual pop-up menu there (right-click) only has "Reevaluate expression". I tried the equation editing area at the top. The contextual pop-up menu there (right-click) only has "Copy as" and "Copy LaTeX expression". At the far right of that area there is also a menu (as identified by a downward-pointing triangle), which only contains maths templates. At the very bottom left, an action menu contains new {equation, point set, group}.
In short, I cannot find the pop menu supposed to contain the condition item.
What did I miss?
Many thanks,
Jean-Denis

I finally found it myself: the condition is one of the math template in the math template pop-up menu at the far right of the equation-editing area. This is not obvious because it is not labelled as such until you hover the mouse pointer over it. It looks like a brace with two lines.
OK thanks everybody. Back to Grapher.
Jean-Denis

TS3147 My printer was no longer being detected, so I uninstalled it and when I went to reinstall it I discovered that I no longer have a printer pop up menu to select my printer.

I had a power failure and then began getting a message that the printer (Canon Pixma 610) was not detected. So, I unplugged it from the computer, restarted the computer and no change. The printer was still showing as the default printer, but not being detected. So I deleted the printer and then tried to reinstall it. However, when I clicked on the + sign to reinstall nothing came up. The screen was blank with no printer choices. I went to the Canon website to try and download the driver and received this message: There is no driver for the OS Version you selected. The driver may be included in your OS or you may not need a driver. I would appreciate any help...

MSG2014 wrote:
I finally contacted Canon and they informed me that my printer is not compatible with Maverick
As Greg stated, the Canon support person is simply referring to what they see on the web and knosw nothing about Mac's. The reality is that the v10.8 driver will work on 10.9. You just may need to get past Gatekeeper to install it. So here is a link to the v10.8 driver. If you get a message stating that the driver is not signed and cannot be installed, then this is Gatekeeper blocking it. So to install it, right click (or Control-click) on the installer and select Open from the pop-up menu. Now you will have the option to install.
The second issue is the printer not appearing in the Add printer window. The USB cable is often the cause as suggested already. Also USB hubs can be a cause. To check if the Mac can see the printer, open System Information and select USB in the left column. The top right pane will show all the USB busses in your Mac. The MP610 should be listed under one of these busses. If it is not present, then try another USB cable and/or another USB port on the Mac. Until you see the MP610 in this view, you will not be able to add the printer.

Keyboard shortcut to open a cells pop-up menu and select from list of options.

I guessed Option-Return would be the shortcut from this, as it typically lets you edit a cells contents, but no. Read the keyboard Shortcuts list in Numbers>Help but didn't see anything.

Hi ts,
Thanks for drawing my attention to this! Let's add some missing detail…
While "you just press spacebar" to open the pop-up menu, that won't select a menu item.
After you've opened the menu, 'you could press the first letter' of an entry, ( 'like every other pop-up list on Earth,') or you could press the down arrow to step down the list (and the up arrow to step up, if you went beyond the item you wanted to choose).
And you can change your mind; the menu will stay open until you confirm your choice (by pressing the space bar again, OR by pressing return OR by pressing enter).
Note that pressing the first letter will select the 'smallest' item name beginning with that letter. To move to another item name starting with that letter, you'll need to use the up or down arrow key (or the mouse).
Thanks again for posting. With luck, WideEyedPupil will still be monitoring this discussion, and will see these posts.
Regards,
Barry

Pop-up menu feature and IE issues

I am using Firework MX 2004, Version 7.0 Build 288, to create drop down menus using the “Pop-up Menu” feature. The pop-up menus that I create work great in Netscape and Firefox, but fair in IE 6.0. The pop-up menus appear under certain elements such as select boxes in IE 6.0. I have read and tried some of the solutions on Blogs in regard to setting the z-index in div tags, but to no avail. Any help or work around would be greatly appreciated! Unfortunately, the huge company I work at switched from Netscape to IE 6.0 as the corporate platform, and I don’t have the patients to upgrade Fireworks if that is the solution. The last time I upgraded from Fireworks 4 toFirework MX 2004 the Macromedia Tech Support area had to e-mail me special registry entries for the product registration to work, and it took a very long time. I still have the emails to remind me of the pain. Thanks William!

I found this: http://kb2.adobe.com/cps/158/tn_15842.html
And this:
Fireworks generated html and javascript calls its layers with a z-index beggining with a value of 1. Try doing a search of text external JS file and you will see your menus.
I would rename the offending layer that runs over the top of the menu layers in the with z-index:0
Also this: http://www.adobe.com/devnet/fireworks/articles/fw8_popups.html
Hope something here works, that being said...the menus from that version arenb't very good. a better solution is CSS menus. A quick solution is from Project Seven here:http://projectseven.com/products/menusystems/pmm2/index.htm for $95. It's a DW extension and simple to use. Alkso compatiple with most browsers.

Pop-up menu(coustomised) inside graphs and plots

Similar Messages

Maybe you are looking for