Populate Depreciation areas to the assets created with no depreciation area

Hi,
We created few Assets under a particular asset class. But only after creating we realised that there were no depreciation areas in it. So I added the depreciation areas to this asset class and then run
AFBN to populate the newly created depreciation areas to the existing assets.But it is not working. Could you please help me to populate these depreciation areas to those existing assets. Is it possible or not?
Please note, the depreciation area tab is completely blank. When I try AFBN for Depr area 01 (Derived Depr area), the system throws a message "Define depreciation area correctly".
I also tried AFBN with "Leave values initial" indicator checked. But still no results.
Do any one of you know how to populate the depr areas to those assets? The User have already created 45-50 assets. If there is no solution, then the last resort is to delete these assets.
Thanks & Regards,
Vinod

Hi Vinod,
AFBN is a simple tool, which copies entries from a source area to a target area. If you have no areas at all defined in the asset master record, there is no source to be copied.
I would propose to delete these assets with AS06 if possible and start over in this asset class. As I understand your description you can not have any posting to such assets up to now.
Regards,
Markus

Similar Messages

  • Which table contains net book value for Assets created with AS91.

    Which table contains net book value for Assets created with AS91.
    I have a problem locating where the net book value is stored in SAP.  Is it simply calculated and not stored in any one place?  I am trying to predict how SAP will calculate the net book value for some assets we plan on converting, but my formula doesn't always work consistently and I have not idea what is going on.  If it is stored in a table some place, can anyone please let me know!
    Thank you all

    Hi anar.samadzade & Michael Stewart
    It is not possible to directly get net book value of an any Table. You must migrate the gross book value (acquisition cost) and the accumulated depreciation. SAP will then calculate the NBV.
    Gross Block & Accumulate Dep you will get from Table: ANLC
    http://fixedassetsaccounting.net/migrating-fixed-assets-into-sap-a-harlex-guide/
    Dear anar.samadzade Ask Questions politely
    Regards
    Viswa

  • Problems retriving the asset created in a batch input using Abnan

    I created a batch input program that use the transaction ABNAN. I need to create a report with all the assets created and their respective documents in the batch input. However, that information is not given in the messages that are retrieve when the transaction is called. I use the following code:
      CALL TRANSACTION tcode USING bdcdata
                       MODE   call_mode
                       UPDATE update_mode
                       MESSAGES INTO messtab.
    At the end of this, messtab have a message id that correspond to this message:" text was saved".
    The asset number and the document # is given in a pop up message that appear when the person press save. This message is not included in the batch input.
    How can i get the asset created and its respective document?

    Hello Orlando
    Please refer to the ABAP documentation for "CALL TRANSACTION":
    CALL TRANSACTION 'ME21'  USING BDCTAB
                        MODE   'N'
                        UPDATE 'A'  " asynchronous !!!
                        MESSAGES INTO MESSTAB.
    CALL TRANSACTION 'ME21'  USING BDCTAB
                        MODE   'N'
                        UPDATE 'S'  " synchronous -> like COMMIT WORK AND WAIT
                        MESSAGES INTO MESSTAB.
    Regards
      Uwe

  • Reg: PO release notification needs to send to the PR Creater with PO num

    HI Gurus,
    Iam new to workfow. I have one senario in workflow.
    Requirement: when ever PO release notification needs to send to the PR Creater with PO number and corresponding PR number.
    Please guide how to do this .
    My questions :
    1.How can we can get the PR Creater user id to send notification mail
    Thanks & Regards
    Ramesh

    Hi Ramesh ,
    Which workflow you are using for PO . If it is the standard one , there is a rule used in the worklfow called 20000027.
    In this there is an USer exit . In this exit , you can write your code for sending the workitem to the PR creator.
    If you are using a custom workflow for this , then create a new rule and in that write the code for fetching the PR Creator and assign the user ro the actor tab. Incluse this rule in ur task .
    This will solve your problem.

  • Would like to re-create the webpages created with iWeb to iCloud and post

    Would like to re-create the webpages created with iWeb to iCloud and post to the internet

    Unfortunately, iCloud does not support the hosting of webpages. You will need to find a 3rd party web host in order to publish your web sites.
    Depending on the version of iWeb you are using you have a couple of publishing options:
    iWeb '09 (3.0.4) you can publish to an FTP Server or a local folder. ( With the built in FTP in iWeb you will end up with an address like "www.YourDomain.com/sitename/Home.html )
    iWeb '08 you can publish your website to a local folder. Then upload to your host with an FTP application like CyberDuck
    I have been using IX Webhosting for several years with little to no problems "usually the problem was something I did" and they have been quick to solve any issue I have come across. The have plans that start at $3.95 a mo (USD) and their customer service is top notch.
    http://jeffnitschke.com/IXWebHosting.html
    http://jeffnitschke.com/wordpress/2012/06/how-do-i-move-my-mobileme-site-ix-web- hosting-blog/
    "I may receive some form of compensation from my recommendation or link."

  • Client wanted  to delete the document created with the wrong GL with the WB

    Dear All,
    The user had by mistake posted the the document in a wrong GL with with WBS element under the Project.
    We have tried to reverse it through a reversal posting. But it could not be done.
    Client wanted  to delete the document created with the wrong GL with the WBS element.
    How this can be set right?
    Please advice.
    Regards
    Bijudas

    document cannot be deleted in SAP
    reverse the document and then report

  • Client wanted to delete the document created with the wrong GL with the WBS

    Dear All,
    The user had by mistake posted the the document in a wrong GL with with WBS element under the Project.
    We have tried to reverse it through a reversal posting. But it could not be done.
    Client wanted to delete the document created with the wrong GL with the WBS element.
    How this can be set right?
    Please advice.
    Regards

    document cannot be deleted in SAP
    reverse the document and then report

  • Trial version problem with the wrie Create with the trial version

    help me
    trial version problem with the write Create with the trial version
    i wanna delete the Create with the trail version

    Publication on businCata I am sorry I do not understand your inquiry.  Can you please restate your question?  What Adobe software or service is your inquiry in relation too?

  • How can I see a list of the assets associated with a sequence?

    How can I see a list of the assets, both online and offline, associated with a sequence?

    Exporting an EDL or copying and pasting a timeline into a bin gives a complete list of the clips in a sequence, but what I really would like is a list of the files used, without any duplications due to multiple clips from a single reel. Is there any quick way to automatically generate such a list?

  • How to know the PO  Created with RFQ or Not..??

    Hi MM Gurus,
    How to know the purchase order created with one quotation or not. because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation. i created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying. so how to knows once PO cretd with Quotation or not. . and I dont wanted to disply quotation once created Po.
    Thanks in Advance.
    N.A.Reddy

    Hi Pradeep. Thanks for the mail.
    the problem is ....with *quotation...*
    How to know the purchase order created with one quotation or not.
    because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation.
    I created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying.
    so how to knows once PO cretd with Quotation or not. .
    and I dont wanted to disply quotation once created Po.
    Thanks in Advance.
    N.A.Reddy

  • Retreiving the content created with the Note Tool via Javascript??

    Hey guys, is it possible to retrieve the text content created with the Note Tool from the tool palette  in a photoshop document via Javascript? Basically, I wanted to store some text inside the Photoshop psd document, and then later on I can use scripting to access the content to be use as variables.
    I have search the Javascript scripting reference pdf and the forum here, and I can't find any info the Note Tool. Much appreciated.

    Ok, so I am using the activeDocument.info.keywords property to store my text content. The content is basically a chunk of text that contains some parameters that the user can modify to save out a document. In my script, I am using a variable to store the content from the info.keywords property. But my next hurdle is how can I extract specific part of that variable into other variables, like storing the C:\projects\Textures\ into another variable? I've done some research and got a sense that the "match" method in javascript along with the use of regular expressions might do the job. But I am stuck. Any suggestions?
    info.keywords property has the follow chunk of text:
    // file path to save 
    path(C:\projects\Textures\)  
    // save file format (psd or tga, etc)
    format (tga) 
    // include a single alpha channel with the file y/n 
    alpha(n) 
    // alpha name - default should be "alpha1" 
    alphaName(alpha1) 
    // scale from the original size 
    scale(.5) 
    //sharpening
    sharpen(.5)
    script code:
    var saveDoc = activeDocument.info.keywords;
    var savePath = saveDoc[0].match(regular expression goes here); // how to grab C:\projects\Textures\ from the saveDoc variable???
    alert(savePath);

  • How to restrict Asset Books LOV in the Asset creating work bench

    Currently when users try to create Assets, they are able to see all the Corporate Books in the Book field. We want to restrict this LOV to show only book/s relevant for that Operating Unit.
    Regards,
    Ravi

    Asset Book security by responsibility is possible.
    Please review the user guide/white paper.
    Here is the note.
    Subject: Attaching existing depreciation book to organization hierarchy
    Doc ID: 139518.1 Type: BULLETIN
    Modified Date: 22-OCT-2008 Status: PUBLISHED
    This article is being delivered in Draft form and may contain
    errors. Please use the MetaLink "Feedback" button to advise
    Oracle of any issues related to this article.
    Purpose
    Security by book is new feature for Release 11i. The purpose of this document
    is to describe how to attach existing depreciation book to asset organizations.
    This can useful mainly for customers after upgrade to 11i.
    Prerequisites
    Following steps assume an Asset Organization is already defined.
    Step by step instructions
    1. Query for your Asset Organization in Organization Window:
    Navigator -> Setup -> Security -> Organization -> Description
    Select "Asset Organization: from "Organization Classifications"
    2. When you are in the Organization form, click the Others button.
    The Book Controls window will appear.
    3. Query up the existing book that you wish to attach to the organization
    or you can create New Asset book.
    4. In order to save this book to the organization, the form trigger must recognize
    that a change has occurred to the book information. To create a simple change
    that will enable the Save function to work, enter the Description field and simply
    add a space at the end
    5. Navigate to the File menu and select File: Save. Although there is no visible
    alteration to the book information, the form will now be able to save the book
    to your organization.
    RELATED DOCUMENTS
    ORACLE APPLICATIONS WHITE PAPER Security by Book, from 24-MAR-2000
    Oracle Assets Users's Guide, Setting Up Security by Book, page 9-60

  • Why the metadata created with EM can't be found in JDeveloper

    I created some dimensions and measures. then put them in a cube.And I created a measure folder and added the measures .
    I do all the task with EM. And when I use JDeveloper to build a crosstable, only the demo measures and dimensions are in the available box . None of mine was there!
    Any one can tell me if there any thing necessary I haven't done ?

    You need to do 2 things:
    - make sure you've applied the 9.2.0.4.1 Oracle patch
    - run the cwm2_olap_metadata_refresh.mr_refresh stored proc. Make sure you're connected as OLAPSYS. You need to run this after any OLAP metadata change.
    Here's a few other forum posts that deal with the same issue:
    Re: JDeveloper does not show my OLAP metadata
    Re: How to define appropriate OLAP metadata?
    Regards,
    s.l.

  • How can I reverse the acction create with F110

    When I use F110 for Automatic Payment Transaction,how can I reverse the document  if it nessesary?

    If the payment is done and accounting documents are created, then you have to use FB08 for reversal(FBRA for reset)
    If the invoices are at proposal level, you can delete the proposal(EditProposal-Delete)
    Rgds
    Murali. N

  • Does my iDisk website folder have the same contents as the folder created with Publish to Folder?

    Should I make a back up of the website folder on iDisk?  Is this folder the same as the Domain.sites2 folder in the Library?
    Is it the same as the folder that's created when I click Publish to Folder in iWeb?  It's so confusing - from where should I save, copy, or backup
    my website?  Thanks for clearing this up.

    The folder on iDisk is the published files - the Domain.sites2 has the unpublished data.
    The published files on the iDisk aren't much use to you since you need to republish your site to a new server directly from iWeb or via a local folder and FTP.
    Publishing....
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    Hosting...
    http://www.iwebformusicians.com/iWeb/Website-Hosting.html

Maybe you are looking for