Populate one Autocomplete box on selection of another in DataGrid

I have 2 Auto complete box inside Editable DataGrid. first for 'Type' second for 'Subtype'. I need to populate the corresponding subtypes on the selection of Type in any row of DataGrid.
If I have 2 subtypes with same name in 2 different types then on selection of subtypes system shows only first selected type in both the 'Type' Auto complete box.
Please guide me to resolve the issue.

Hi Mahendra
Please go through the below link for your answer.
Creating Cascading Drop Down Lists in Visual Studio LightSwitch
HTH
Regards
Rashmi Ranjan Panigrahi
www.lightswitchspecial.com
If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.
This will help other users to find their answer quickly.

Similar Messages

How to populate multiple text boxes by selecting a value from drop down

I apologize in advance if this is redundant, but I have searched this forum relentlessly to no avail. I have a form connected to an MS Access database. The database is linked to another datadase on an Advantage server. This is dynamic data that has an ODBC driver allowing to link access tables to the Advantage data. Macros on access updates the table being used on this form. The livecycle form connects to the access data via a DSN on a machine that uses acrobat (not reader). This is a physician office, this form should expedite ordering radiology tests on patients. The plan is to use a drop down to select a chart number that will trigger several text boxes to populate dynamically with the corresponding demographic values like name, age, insurance etc.
Using a data drop down I am able to select the chart number. When I used the example from the office supplies database, so that a button will trigger the event with the following code:
if (Len(Ltrim(Rtrim(SelectField.rawValue))) > 0) then
$sourceSet.DataConnection.#command.query.commandType = "text"
$sourceSet.DataConnection.#command.query.select.nodes.
item(0).value = Concat("Select * from OfficeSupplies Where ID = ", Ltrim(Rtrim(SelectField.rawValue)) ,"")
I recieve a syntax error, despite adjusting quotation since I am using text rather than numeric fields.
My question is the following:
Is there a simple javascript that I can use to populate these text boxes (which may be read only but would be better if it allows user input)? Or does anyone recommend an alternative method? I would be happy with a link that solves this problem if someone can provide. I am somewhat familiar with js but open to any suggesstion.
Thanks
PS this form could also be linked to a Sequel database if that offers an advantage.

The View object API has a setQurery() method that you can use to set the query as needed before executing it via executeQuery(). You can do this in a custom Application Module method exposed to its client interface and bound to the binding layer. You can call this method from your backing bean on a value change listener.

Populate a dropdown based on selected in another dropdown in a seperate table

Good Day All;
This may sound like a simple question to most, but… It has had me frustrated trying to figure out.
I am trying to populate a dropdown based on what is selected in another dropdown.
Let me explain what I have done so far.
LifeCycle Designer 8.05.2
When I had both dropdowns in the same table, I did not have a problem. The code I used is
Table name is “Table1”
if(directorate.rawValue == "1")
division.clearItems();
division.addItem("select")
I was asked to move things around and now “division” is located in “Table2”
I know I need to reference “Table1” but I am running into a Syntax error. I have tried the following code;
if(Table1 Row1 directorate.rawValue == "1")
division.clearItems();
division.addItem("Faire un choix")
if(Table1.Row1.directorate.rawValue == "1")
division.clearItems();
division.addItem("Faire un choix")
Any help would be appreciated
Chomp

You're missing a semicolon at the end of the addItem line, and on the second code sample you've got no periods in the SOM reference (Table1 Row1 directorate).
The easiest way to get the path to another field is to ctrl-click on the field while you are in the script editor.

Pre-Populate Dropdown based on information selected in another dropdown

Hello,
I hope this make since. I am working on building a form using Adobe Livecycle Designer. I have a dropdown list in multiple fields on the same form that will have the same information selected. I want the additional fields to automatically populate the information a user selects in the first dropdown list. Is this possible ??? If so, what would be the script/code necessary to do so ??? Thank you for your help.
Example
City, State appears in 4 different fields based on the selection in field 1, the additional 3 fields auto-populates the same information.
Field/List 1: New York, NY <-- Selected City, State
Field/List 2: New York, NY <-- Auto Populated based on field 1
Field/List 3: New York, NY <-- Auto Populated based on field 1
Field/List 4: New York, NY <-- Auto Populated based on field 1

In the exit event of the first State field, using Javascript, something like this should work:
State2.rawValue = this.rawValue;
State3.rawValue = this.rawValue;
State4.rawValue = this.rawValue;
...where "State2", "State3", etc. are references to the other dropdowns you want to populate with the same information from the first state field.
Be sure to set the binding values in the BINDING tab of the dropdowns to the same in each dropdown,
Brian

How do I populate one Combo box based on input from another

Hi,
I have a dynamic Combo box populated from a database. Now I want to use the onChanged event to dynamically populate a second combo box on the same page.
Any ideas on how to do this?
Robert
[email protected]

Here is an example:
let us consider it not coming from the database:
<html>
<head>
<title>New Page 1</title>
<script>
function popSub()
var n = 1;
var mainValue;
mainValue = document.test.main.options[document.test.main.selectedIndex].value ;
if (mainValue=="Age" )
                    document.test.sub.options[n].value = 'below18';
                    document.test.sub.options[n].text = 'Below 18';
                    n =     n + 1;
if (mainValue=="Age" )
                    document.test.sub.options[n].value = 'over18';
                    document.test.sub.options[n].text = 'Over 18';
                    n =     n + 1;
if (mainValue=="Sex" )
                    document.test.sub.options[n].value = 'male';
                    document.test.sub.options[n].text = 'Male';
                    n =     n + 1;
if (mainValue=="Sex" )
                    document.test.sub.options[n].value = 'female';
                    document.test.sub.options[n].text = 'Female';
                    n =     n + 1;
</script>
</head>
<body>
<form method="POST" name="test">
<p><select size="1" name="main" onClick="popSub()">
<option value="Age">Age</option>
<option value="Sex">Sex</option>
<option selected>select one</option>
</select></p>
<p><select size="1" name="sub">
<option value=""></option>
<option value=""></option>
<option value=""></option>
</select></p>
<p><input type="submit" value="Submit" name="B1"><input type="reset" value="Reset" name="B2"></p>
</form>
</body>
</html>
If it coming from the database then you have to write the javascript function in jsp as follows:
out.println('<script language="JavaScript">');
out.println('function popSub()');
out.println('{');
out.println('var n = 1;');
out.println('var mainValue;');
out.println('mainValue = document.test.main.options[document.test.main.selectedIndex].value ;');
// start one for loop from 1 to record count
out.println('if (mainValue=="' + valuefrom the resultset + '")');
out.println('{');
out.println("document.test.sub.options[n].value = '" + value from the result set +"';");
out.println("document.test.sub.options[n].text = '"+value from the result set+"';");
out.println('n=n+1;');
out.println('}');
// end of the for loop
finish the javascript function using out.println

Clearing Value in one Prompt based on selection in another

Hello,
I have 2 prompts in my BEx query designer for same characterstics ( one is single value, characterstic variable and another one is Hierarchy node variable ). During the query execution, If user selects a value in first prompt and goes to the other prompt and selects a value, i need to clear the selected value in the first prompt. And vice versa as well.....
Please suggest.

Jagan,
Let me explain my isue in detail...
I have created 2 variables for the same characterstics and both of them are ready for input. One variable is of characterstic type and other is Hierarchy node type.
Now, when user executes the query he sees two prompts. Lets say user selects a value for one prompt and then goes to second prompt and selects another value for the second prompt, then i need to clear the values that was selected by him for the first prompt. And vice versa....

If one check box is selected I want to unselect the others

Hello,
I am putting scripts on an insurace governmental form. This form has a few check boxs on top of it "not radio buttons"... I would like to be able to unset some of these checkboxes if one one is set ... I searched arround and I could not find an example... Thanks in advance for your help...
Regards
Jeff..

Instead of naming the checkboxes 'Checkbox1', 'Checkbox2', 'Checkbox3', etc., you need to give them all the same name (e.g. 'Checkbox' or, preferably, something a little more descriptive of their purpose) and then set the export value (under the 'Options' tab when setting up each field) to the individual values that each checkbox is used for.

Populate error message if not selected any of the check box in select scren

hi,
           I am working on a bdc program to upload selected fields, I have populated my 10 fields on selection screen. Given one check box for test run. If I have selected test run check box and not selected any of the field check boxes, it has to populate one error message message 'select atleast one field checkbox' and should stay on selection screen itself. I used 'S' and used message leave list-processing, but i need error message 'E' and populate message select on check box and do not go for process.
thanks & regards,
   Sekhar.

Hi,
as you don't want to process further and also want to stay on the same screen,then use this at
AT SELECTION-SCREEN.
if p_test_run = 'X' AND.......   " conditions for which msg is to be raised
    MESSAGE Ixxx(xyz).    " *use msg type 'I' Information message*
    LEAVE LIST-PROCESSING.
    LEAVE SCREEN.
endif
regards,
neha
Edited by: Neha Shukla on Mar 6, 2009 11:22 AM

How to populate one internal table from another using field symbols

Hi Gurus,
I have a problem. I have to populate one internal table (sructure t_otput) from another internal table (sructure t_from) using field symbol.
Structure for from table.
types: begin of t_from,
         year(4) type c,
         ww(2) type c,
         site type marc-werks,
         demand type i,
       end of t_from.
Structure for output table.
types: begin of t_display,
         title(30),
         WW1(10),
         WW2(10),
         WW3(10),
       end of t_display.
The from table looks like this:
Year | WW | Site | Demand
2005 | 1 | OR1 | 12.00
2005 | 2 | OR1 | 13.00
2005 | 3 | OR1 | 14.00
The display table which has to be populated should look like this:
Title | WW1   | WW2   | WW3
OR1    |       |       |
Demand | 12.00 | 13.00 | 14.00
How to populate display table using field symbol?
Please give code snippets
Thanks,
Gopal

Gopal,
Here is the code, however I am not vary clear about the ORG1 and Demand display that you have shown in the display. I am sure with this code it should not be a big deal to tweak in whatever manner you want.
TABLES : marc.
TYPES: BEGIN OF type_display,
title(30),
ww1(10),
ww2(10),
ww3(10),
END OF type_display.
TYPES: BEGIN OF type_from,
year(4) TYPE c,
ww(2) TYPE c,
site TYPE marc-werks,
demand TYPE i,
END OF type_from.
data : t_from type table of type_from,
       t_display type table of type_display.
field-symbols : <fs_from> type type_from,
                <fs_display> type type_display.
data : wa_from type type_From,
       wa_display type type_display.
wa_from-year = '2005'.
wa_from-ww   = '1'.
wa_from-site = 'OR1'.
wa_from-demand = '12.00'.
insert wa_from into table t_from.
wa_from-year = '2005'.
wa_from-ww   = '2'.
wa_from-site = 'OR1'.
wa_from-demand = '13.00'.
insert wa_from into table t_from.
wa_from-year = '2005'.
wa_from-ww   = '3'.
wa_from-site = 'OR1'.
wa_from-demand = '14.00'.
insert wa_from into table t_from.
data : variable(3) type c.
field-symbols : <fs_any> type any.
break-point.
Loop at t_from assigning <fs_from>.
variable = 'WW'.
wa_display-title = <fs_from>-site.
concatenate variable <fs_from>-ww into variable.
assign component variable of structure wa_display to <fs_any>.
<fs_any> = <fs_from>-demand.
endloop.
append wa_display to t_display.
clear wa_display.
loop at t_display assigning <Fs_display>.
write :/ <fs_display>.
endloop.
Note : Please award points if this helps you.
Regards,
Ravi

How can I make a field unfillable when a check box or radio box is selected?

I'm looking to create a rule that makes selected fields un-fillable when one check box is selected, and fillable when another is selected. Is this possible in Adobe Acrobat?

In that case they are mutually exclusive, or at least should be...
You can use something like this as the custom MouseUp script for the check-boxes:
if (event.target.value=="Yes") {
     this.getField("Field1").readonly = true;
     this.getField("Field2").readonly = true;
     this.getField("Field3").readonly = true;
     this.resetForm(["Field1", "Field2", "Field3"]); // this line will clear those fields as well
} else if (event.target.value=="No") {
     this.getField("Field1").readonly = false;
     this.getField("Field2").readonly = false;
     this.getField("Field3").readonly = false;

How to populate a table based on a row selection from another table.

Hi, i just started to use ADF BC and Faces. Could some one help me or point me a solution on the following scenario .
By using a search component , a table is being displayed as a search result. If i select any row in the resulted table , i need to populate an another table at the bottom of the same page from another view. These two tables are related by primary key . May i know how to populate a table based on a row selection from another table. Thanks
ganesh

I understand your requirement and the tutorial doesn't talk about Association between the views so that you can create a Master-Detail or in DB parlance, a Parent-Child relationship.
I will assume that we are dealing with two entities here: Department and Employees where a particular Department has many Employees and hence a Parent-Child relationship.
Firstly, you need to create an Association between the two Entities - Department and Employees. You can do that by right clicking on the model's entity and then associating the two entities with the appropriate key say, DepartmentId.
Once you have done that, you need to link the two entities in the View section with this Association that you created. Then go to AppModule and make sure that in the Available View Objects: 'EmployeesView' appears under 'DepartmentView' as "EmployeesView via <link you created>". Shuttle the 'DepartmentView' to the right, Data Model and then shuttle
"EmployeesView via <link you created>" to the right, Data Model under 'DepartmentView'.
This will then be reflected in your Data Controls. After that, you simply would have to drag this View into your page as a Master-Detail form...and then when you run this page, any row selected in the Master table, would display the data in the Detail table.
Also, refer to this link: [Master-Detail|http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html]
Hope this helps.

Field Populates based on Selection in Another Field

Hi everyone,
I have created a new position description template using a pdf form. In this form I have various fields. I would like to populate one field based on what I have selected in another field. For example, I have a field called competency. In this field I can select and choose a competency. If I select "Accountability" I would like the description field to say " Accepts personal responsibility for the quality and timeliness of work. Can be relied upon to achieve results with little need for supervision. " alternatively if I select "Compliance" I would like the description field to say "Complies with policies, procedures, workflows and instructions." Can anyone assist me with script or is there another way of making this happen.
Thanks in advance

I think this is what you are looking for:
Make sure that you select "Commit selected value immediately" in the options tab of the drop down menu.
//Place this script in the custom validation script of the drop down menu
//Create a text field caleld Text2
var MySelection = event.value;
switch (MySelection) {
case "Accountability":
    this.getField("Text2").value = "Accepts personal responsibility for the quality and timeliness of work. Can be relied upon to achieve results with little need for supervision. ";
break;
case "Compliance":
    this.getField("Text2").value = "Complies with policies, procedures, workflows and instructions.";
    break;
I hope this helps.

How to populate one dropdown on select of other dropdown in a table

Hi
My requirement is that I want to populate one dropdown on selection of some value in other drop down.The two dropdown are present in two columns of a Table.
Can any body help for the same.
Regards
Nitin

Hi,
Try This
Bind "enable" properties of Both DD1 and DD2 to
context attributes of type boolean. DD1Enable,DD2Enable
1: set their value to false intially
wdContext.currentContextElement.setDD1Enable(false);
wdContext.currentContextElement.setDD2Enable(false);
Bind the selected property of the table to a
Context attribute of type boolean(Initially false), say "selected"
2: Then use check box in the table to get current lead selection
write in "onToggle" action of checkBox
int len=wdContext.nodeTable().size();
for(int i=0;i<len;i++)
         if(wdContext.currentTableElement().getSelected()==true)
             wdContext.currentDD1Element().setDD1Enabled(true);
             wdContext.currentDD2Element().setDD2Enabled(true);
         }else
     wdContext.currentDD1Element().setCountryEnabled(false);
     wdContext.currentDD2Element().setStateEnabled(false);
This is how u get leadselection and able to change particular row in the table
Regards
Lakshmi

How to disbale a group of checkboxes when i select one check box WEBDYNPRO

Hi Friends,
Can any body help me how to disbale a group of checkboxes when i select one check box WEBDYNPRO Abap
Also can any body tell me how to handle chain endchain type of scenario in WEBDYNPRO Abap
Thank you..
Sai

Hi
In the context tab , create 2 context attributes ca_attr1 and ca_attr2   of type WDY_BOOLEAN under a context node cn_node
now in ur Layout , bind the ENABLE property of CheckBoxGroup UI Element with this attribute ca_attr1
bind the ENABLE property of CheckBox UI Element with this attribute ca_attr2
create a action for ur Checkbox , for the OnToggle property of ur checkbox
in OnactionToggle , check if ca_attr2 is 'X' , set ca_attr2 to ' ' ( for disable)
this can be done by code wizard , press control +f7 and use read/set context attributes , use get_attribute and set_attribute methods
// if ca_attr2 is 'X'
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
    DATA ls_cn_node TYPE wd_this->element_cn_node .
    DATA lv_attr LIKE ls_city-ca_attr2.
    lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
*   get element via lead selection
    lo_el_cn_node = lo_nd_cn_node->get_element( ).
*   get single attribute
    lo_el_cn_node->get_attribute(
      EXPORTING
        name = `CA_ATTR2`
      IMPORTING
        value = lv_attr ).
// if lv_attr2 is 'X' , use set_attribute method for ca_attr1
IF lv_Attr EQ 'X' .
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
    DATA ls_cn_node TYPE wd_this->element_cn_node .
    DATA lv_attr LIKE ls_city-ca_attr.
*   navigate from <CONTEXT> to <CN_VISIBLE> via lead selection
    lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
*   get element via lead selection
    lo_el_cn_node = lo_nd_cn_node->get_element( ).
*   set single attribute
    lo_el_cn_node->set_attribute(
      EXPORTING
        name = `CA_ATTR1`
        value = ' ').
ENDIF.
regards,
amit

How to make a selection in one photo and move it to another photo

I have always used Photoshop Elements, from 7 up to 12. I just bought Photoshop CC. I am totally confused over it. There's not photo Bin, that is where I use to drag from the open photo down to the one I wanted the selection in. I tried doing it
by making the pictures smaller and dragging them down to the bottom, but then things got messed up and every time I opened another photo to use it open on top of the previous one. To me this is important as this is what I have done
in Elements all the time. I can learn the other stuff about Photoshop later, but this one thing is important to me to be able to figure out. I make pictures for people who have lost their pets or for birthdays and use a lot of digital scrapping stuff in
them. It's always been easy to do so, but now I am totally in a daze over how to do it. Always wanted Photoshop, but I only have 30 days to decided if I like it and if I can't figure this one thing out I will have to return the program. Can someone
point me in the right direction for some tutorials on how to do this one thing?

Oh, and I'm not sure what you mean Load Files into Stack. ??????
In the menu Edit there is an item Scripts and there is an Item Load …
If you want to rescale, rotate, … parts of your composition you should work with Smart Objects.
So see if Photoshop > Preferences > General > Palce or Drag Raster Images as Smart Objects is checked and then use File > Place to put the elements into your layered file.
Whenever you need to adjust one select it in the Layers Panel and invoke Edit > Free Transform (cmd-T).
The advantages of Smart Objects are numerous:
• multiple instances of a SO in a containing document that update simultaneously on saving an edited SO (please note that for a SO to maintain a connection to the external file one needs to use File > Place Linked instead of File > Place Embedded )
• the possibility of placing vector content as Vector Smart Objects (though this will output as pixels)
• non-destructive application of Filters
• non-destructive application of transformation, warp, puppet warp (not all of these are available for Vector SO, but by converting such a one to a regular SO they become applicable)
• combination of elements of different color spaces
• the ability to Replace Contents of SO (for example when faking as-of-yet non-existent products by mapping packaging design elements onto images of a blank container and the design is likely to change)
• Stack Modes for certain combinations of photographic images

Populate one Autocomplete box on selection of another in DataGrid

Similar Messages

Maybe you are looking for