Populate Series ID in header using block trigger

Hi Gurus,
I need your help.
What is the correct block trigger that i should use in order to populate a series id in a field
only when the NEW record button in the toolbar.
Hoping for your reply.
Thanks

orville wrote:
What is the correct block trigger that i should use in order to populate a series id in a field
only when the NEW record button in the toolbar.
Since you're using only the button to add a record, you can either include the code in your button trigger and initialize the ID or you can use the WHEN-NEW_RECORD-INSTANCE trigger and test the record status.
Something like this:
IF :SYSTEM.RECORD_STATUS IN ('CHANGED', 'NEW') THEN
  :BLOCK.SERIAL_ID := :SYSTEM.TRIGGER_RECORD;
END IF;This is a simple example, you can further evolve the code to suite your requirements.
Tony

Similar Messages

  • Use reference trigger for cyclic recording data

    Hi,
    Before I start, let me briefly introduce what hardware I have and what I want to achieve.
      I  got SCXI-1000 (Chassis), SCXI-1102C (module), SCXI-1303 (terminal block,
      mainly for temperature sensor input); a couple month ago  I bought feedthrough SCXI-1180 and terminal SCXI-1302 to input my digital signal (see attached PNG file). In fact, I have two digital signals to input. The first one is Injection digital signal (input as PFI0) which will trigger the start of recording my
    temperature profile; The second is packing signal (input as PFI1), which I want to use as a reference trigger to stop the recording and save as the cycle file.
    And then the injection cycle keeps going. Please see the attached VI for details.
        I get my digital trigger working to start recording my temperature sensor profile. However, I can't get the second part trigger to stop the recording.
    The error message from running my VI is that a reference trigger is only applicable for finite sampling. It seems that I need continuous sampling to recording my temperature profile! So, by looking through my VI, please give some suggestions to do the task and solutions to solve the conflictions for sampling.
      Your assistance is higly appreciated.
    HW
    Solved!
    Go to Solution.
    Attachments:
    Arburg digital signals.png ‏17 KB
    Trigger_Test2_TransientComparison.vi ‏109 KB

    Hi, Jim:
    I've tried with the way you suggested to poll out the digital line. In your VI, it will stop the running of the whole program when the second signal jumps up. If you see my VI attached, I'd like to start recording with the first trigger and then stop the cycle file by the second trigger signal falls down, and then keep recording the second cycle until clicking stop (reference to my signal illustration).
    So what I am trying is to use both trigger signal to output a boolean value (when both trigger signals are 0), reverse it to true (1), and use it to stop the cycle file. But I am still little far away from doing the task. Is there any way to do the cyclic file as I want with or without 'Write to Measurement File' VI?
    Please edit my VI and save in V8.5. Thanks for your help! 
    Best Regards
    HW
    Attachments:
    Trigger_signal_illustration.png ‏12 KB
    Read_AI_Test2-Dig_Chan_triggers.vi ‏111 KB

  • Make Header billing block editable in vl03n

    When a outbound delivery is tied to sto then header billing block is coming in display mode in vl02n i want to make this editable. Are there some enhancement point to do so?

    I checked coding in the PBO of screen 2112 (Header -> financial processing) where the billing block (LIKP-FAKSK) is located.
    According to the logic this field will be greyed out (screen-input = 0) only if the delivery is not billing relevant (if both standard vbuk-fkstk or inter company vbuk-fkivk billing relevant flags are blank).
    Include: MV50AF0F_FELDAUSWAHL
    Form: FELDAUSWAHL
    if screen-name eq 'LIKP-FAKSK'.
      if xvbuk-fkstk eq space and
         xvbuk-fkivk eq space.
        screen-input = 0.
        exit.
      endif.
    endif.
    So the delivery type you are looking at is not relevant to billing at all
    There are definitely some enhancement points after the above code which you can use to override and influence this behavior. But I would suggest not doing so unless you clarify with the customer on why this delivery is treated by the system as not billing relevant.

  • Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command

    Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
    and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
    My questions are How do you direct this utility to point to the desktop or the TFTP folder
    does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
    My router is suppose to have 10.0.0.3 255.0.0.0
    Gateway of 10.0.0.1 255.0.0.0
    My TFTP Server 10.0.0.2 255.0.0.0
    How do I get the MAC address of the Router or the TFTP Server and which one  is required?
    my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
    =====================================================================================
    rommon 10 >
    rommon 10 > set
    PS1=rommon ! >
    FE_PORT=0
    WARM_REBOOT=
    RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
    BSI=0
    RET_2_RCALTS=
    RANDOM_NUM=1600357627
    ?=0
    IP_ADDRESS=10.0.0.3
    IP_SUBNET_MASK=255.0.0.0
    DEFAULT_GATEWAY=10.0.0.1
    TFTP_SERVER=10.0.0.2
    TFTP_FILE=
    rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
    rommon 12 > TFTP_CHECKSUM=0
    rommon 13 > SET
    monitor: command "SET" not found
    rommon 14 > set
    PS1=rommon ! >
    FE_PORT=0
    WARM_REBOOT=
    RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
    BSI=0
    RET_2_RCALTS=
    RANDOM_NUM=1600357627
    IP_ADDRESS=10.0.0.3
    IP_SUBNET_MASK=255.0.0.0
    DEFAULT_GATEWAY=10.0.0.1
    TFTP_SERVER=10.0.0.2
    ?=0
    TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
    TFTP_CHECKSUM=0
    rommon 15 > tftpdnld
              IP_ADDRESS: 10.0.0.3
          IP_SUBNET_MASK: 255.0.0.0
         DEFAULT_GATEWAY: 10.0.0.1
             TFTP_SERVER: 10.0.0.2
               TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
            TFTP_VERBOSE: Progress
        TFTP_RETRY_COUNT: 18
            TFTP_TIMEOUT: 7200
           TFTP_CHECKSUM: No
            TFTP_MACADDR: 30:37:a6:49:35:a8
                 FE_PORT: Fast Ethernet 0
           FE_SPEED_MODE: Auto
    Invoke this command for disaster recovery only.
    WARNING: all existing data in all partitions on flash: will be lost!
    Do you wish to continue? y/n:  [n]:  y
    ARP: address resolution for 10.0.0.2 timed out.
    ARP failed with failure code 1.  TFTP transfer aborted.
    TFTP: Operation terminated prematurely.
    rommon 16 >       " not found
    rommon 17 >FE_SPEED_MODE=2
    variable name contains illegal (non-printable) characters
    rommon
    rommon 18 > set
    PS1=rommon ! >
    FE_PORT=0
    WARM_REBOOT=
    RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
    BSI=0
    RET_2_RCALTS=
    RANDOM_NUM=1600357627
    IP_ADDRESS=10.0.0.3
    IP_SUBNET_MASK=255.0.0.0
    DEFAULT_GATEWAY=10.0.0.1
    TFTP_SERVER=10.0.0.2
    TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
    TFTP_CHECKSUM=0
    ?=0
    rommon 19 > tftpdnld [ur]
    usage: tftpdnld [-hr]
      Use this command for disaster recovery only to recover an image via TFTP.
      Monitor variables are used to set up parameters for the transfer.
      (Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
      "ctrl-c" or "break" stops the transfer before flash erase begins.
      The following variables are REQUIRED to be set for tftpdnld:
                IP_ADDRESS: The IP address for this unit
            IP_SUBNET_MASK: The subnet mask for this unit
           DEFAULT_GATEWAY: The default gateway for this unit
               TFTP_SERVER: The IP address of the server to fetch from
                 TFTP_FILE: The filename to fetch
      The following variables are OPTIONAL:
              TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
          TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
              TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
             TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
              TFTP_MACADDR: The MAC address for this unit
                   FE_PORT: 0= (default), 1
             FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                            5=Auto (default)
          TFTP_DESTINATION: The flash destination device for the file
                            flash:(default), usbflash0:, usbflash1:
      Command line options:
       -h: this help screen
       -r: do not write flash, load to DRAM only and launch image
    rommon 20 > tftpdnld
              IP_ADDRESS: 10.0.0.3
          IP_SUBNET_MASK: 255.0.0.0
         DEFAULT_GATEWAY: 10.0.0.1
             TFTP_SERVER: 10.0.0.2
               TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
            TFTP_VERBOSE: Progress
        TFTP_RETRY_COUNT: 18
            TFTP_TIMEOUT: 7200
           TFTP_CHECKSUM: No
            TFTP_MACADDR: 30:37:a6:49:35:a8
                 FE_PORT: Fast Ethernet 0
           FE_SPEED_MODE: Auto
    Invoke this command for disaster recovery only.
    WARNING: all existing data in all partitions on flash: will be lost!
    Do you wish to continue? y/n:  [n]:  y
    ARP: address resolution for 10.0.0.2 timed out.
    ARP failed with failure code 1.  TFTP transfer aborted.
    TFTP: Operation terminated prematurely.
    rommon 21 >

    What I notice in the original post is this error
    ARP: address resolution for 10.0.0.2 timed out.
    which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
    HTH
    Rick

  • How can I change excel column header using Labile.

    Dear Experts,
                          How can i change excel column header using LabVIEW.
    Thanks for any and all help!
    M.S.Sivaraj.
    Sivaraj M.S
    CLD

    As I said in my previous post, column headers in Excel are merely row 1 cells. May be I missing something here, so please be more explicit with your question.
    I guess you are using the Excel Report tools, and you want to modify an existing sheet. From my limited experience with the Excel Report tools, it is not possible to open an existing woorkbook (except as template...), so the answer to your question should be "Forget it"...
    The work around is to use the example I pointed for you before, and either to write the whole new colum headers as a string array, starting in A1, or to write a single string to a given cell in row 1.
    Hope this helps 
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • Issue in File to RFC to File Scenario with BPM using Block Step

    Hi Everybody,
                           I am doing File to RFC to File Scenario for multiple records using BPM using Block Step. The File Message is getting posted and after that, the message is getting stuck up in the qRFC Monitor (Inbound Queue).
                        After seeing the message in Inbound Queue, I am trying to execute and release the message. But when i execute the LUW, it says " Function module doesnt exist or EXCEPTION raised" in Inbound queue.
    Could somebody suggest me the outcome of this? What does this mean and how to
    release the stuck up message in Queue.
    Thanks and Regards,
    N.Jayanth Kumar

    Hi Rajesh,
                           After going through the blog, i saw the trace messages. It says      
    " The   exception occurred (program: CL_SWF_XI_INBOUND=============CP, include CL_SWF_XI_INBOUND=============CM00F, line: 19)"
    Regards,
    N.Jayanth Kumar

  • How can i get a file header using this method cl_gui_frontend_services= gui

    Hi Experts,
    How can i get a file header using this method cl_gui_frontend_services=>gui_download
    Thanks
    Basu

    Hi,
    You can use the FM - GUI_DOWNLOAD to specify the headers. It can be done in the following manner -
    TYPES: BEGIN OF ty_head, "Structure for header
                 h(10) TYPE c,
                 END OF ty_head.
    DATA: it_head  TYPE TABLE OF ty_head WITH HEADER LINE.
    "Adding header details
    it_head-h = 'Field1'.
    APPEND it_head.
    it_head-h = 'Field2'.
    APPEND it_head.
    it_head-h = 'Field3'.
    APPEND it_head.
    it_head-h = 'Field4'.
    APPEND it_head.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                        = p_file
       filetype                        = 'ASC'
       write_field_separator           = 'X'
       header                          = '00'  "<= note this
      TABLES
        data_tab                        = it_tab
       fieldnames                      = it_head[] "<= Pass your header table here
    EXCEPTIONS
       OTHERS                          = 1.
    Hope this helps.
    Regards,
    Himanshu

  • Problem setting Unicode (utf-8) in http header using tomcat

    Hi:
    I am trying to set a file name in utf-8 to http header using the following code:
    response.setContentType("text/html; charset=utf-8");
    response.setHeader("Content-disposition", "attachment; filename=&#35299;&#27770;.zip");
    // I actually has file name in utf-8 here to set to the header, and I know that the name is correctly
    // and I also looked into the response object MimeHeaders object and saw the head is correctly there
    then write the content of zip file using ServletOutputStream.
    The problem I have is that the file name is not displayed correctly when prompted to save or open in the pop up window next. I found out using Fiddler that the request header is wrong:
    Content-disposition: attachment; filename=&#65533;zn&#65533;�.zip
    I am using Tomcat 5.0.28. Any idea how to get this working?
    Thanks in advance!

    You are setting the charset for the content to be UTF-8. (That is why the method is called setContentType.) But HTTP headers are not part of the content and so that has no effect on the header.
    The original specification for HTTP only allowed US-ASCII characters in headers. It is possible that more recent versions have features that allow for non-ASCII header data, but I don't know if that is the case or how you would use those features if they exist.

  • How to process (populate & merge) XFA PDF Forms using Adobe library in Java

    We have the XFA Forms (.pdf) created in Adobe LiveCycle designer 8.2 ES. We have the following requirement :
    1. We need to populate data in those forms using standalone Java programs.
    2. We need to merge the populated forms and create a single PDF out of these forms, using standalone Java programs.
    Can both of these be done using Adobe PDF Library or Acrobat SDK?
    What is the difference between Adobe PDF Library or Acrobat SDK?
    We already have the licensed version of Adobe Acrobat Professional 9 with LiveCycle Designer 8.2 ES. Where can I get the relevant Adobe Java APIs from?
    Can someone provide some sample code that could be used for the above requirements?
    Please provide your inputs on these. We have been using IText, but facing some limitations in that recently.

    The answer looks quite clear, and the conclusion is essentially simple: Don't use LiveCycle Designer.
    Keep in mind that LiveCycle Designer originated as design tool for the according servers (that's way back in JetForms's days). For reasons I still can follow, Adobe decided to thow this design tool after any Acrobat Pro for Windows buyer. And the forms industry is now suffering from the mess that created.
    Also, keep in mind that the term "Server" is used here as "service providing application".
    Rants aside, was there a specific feature making you chose XFA (aka LiveCycle Designer)? Knowing these reasons can help us finding suitable workarounds.
    HTH.
    Max Wyss.

  • Abort inserting a record in a table using a trigger

    Hi there,
    Is there any way to abort inserting a record in a table using a trigger?
    For full details, I have the following table ("myTable"):
    BSC INTEGER NOT NULL,
    BTS VARCHAR2(20) NOT NULL,
    INFO1 INTEGER,
    INFO2 INTEGER
    myTable_PK = PRIMARY KEY (BSC,BTS)
    I have also a stored procedure that imports a data from text file and inserts them to the specified table (using UTL_FILE package). The stored procedure works great.
    But the thing that in the text file itselft it might be (due to third-parity report generation bug) that the primary key will be violated or the BSC/BTS field has null value. In such case I just want to ignore the insertion statement using a trigger.
    Thanks

    Ok Jens, could you tell me what exception could I use?
    Below a protion of my StoredProcedure.
    CREATE OR REPLACE PROCEDURE update_myTable() IS
    FHANDLE UTL_FILE.FILE_TYPE;
    BSC INTEGER;
    BTS VARCHAR2(20);
    INFO1 INTEGER;
    INFO2 INTEGER;
    BEGIN
    FHANDLE := UTL_FILE.FOPEN('LOG_FILE_DIR',FILENAME,'R',4000);
    LOOP
    UTL_FILE.GET_LINE(FHANDLE,STR);
    -- Process the line STR and generates BSC, BTS, INFO1, and INFO2 values
    EXECUTE IMMEDIATE 'INSERT INTO myTable VALUES(:1,:2,:3,:4)' USING BSC,BTS,INFO1,INFO2;
    END LOOP;
    EXCEPTION WHEN NO_DATA_FOUND THEN UTL_FILE.FCLOSE(FHANDLE);
    END UPDATE_R205BTS;
    Remember that I am already using an exception with NO_DATA_FOUND to indicate the end of file then closing it.
    Thanks for your reply

  • How can i add a table header using DefaultTableModel?

    Im having problems finding examples of creating a table header using the DefaultTableModel. Can anyone point me in the right direction?
    so far i am able to create a table and add rows, but i need the first row to be the header with title and i am not able to do that with this model.
    Below is an excerpt of what i have thus far...
    JTableHeader header = new JTableHeader();
            checkOutTable.setModel(tableModel);
            checkOutTable.setRowSelectionAllowed(true);
    private DefaultTableModel tableModel = new DefaultTableModel(
                new Object [][] {
                        {"Item ID", "Title", "Type", "Serial ID", "Status", "Response", "Print"},
                    new String [] {
                        "TITLE 1", "TITLE 2", "TITLE 3", "TITLE 4", "TITLE 5", "TITLE 6", "TITLE 7"
                ){Class[] types = new Class[] { java.lang.Object.class,
                        java.lang.Object.class, java.lang.Object.class,
                        java.lang.Object.class, java.lang.Object.class,
                        java.lang.Object.class, java.lang.Object.class };
                public Class getColumnClass(int columnIndex) {
                    return types[columnIndex];
                }};

    Use the constructor that takes a Vector of column names and a row count.
    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/table/DefaultTableModel.html#DefaultTableModel(java.util.Vector,%20int)

  • How to show the VALUE as the Column Header using SQL query?

    Hi
    I have a requirement to show the picked value as the column header using SQL query.
    Example:
    ======
    SELECT EMPNO FROM EMP
    WHERE EMPNO=7934;
    Result Should be:
    7934
    7934

    I have a requirement to show the picked value as the column header using SQL query.In sql*plus you can do
    SQL> set verify on
    SQL> def e =  7934
    old: SELECT empno "&&e"  FROM emp  WHERE empno = &&e
    new: SELECT empno "7934"  FROM emp  WHERE empno = 7934
    SQL> SELECT empno "7934"  FROM emp  WHERE empno = 7934
          7934
          7934
    1 row selected.

  • Changing colors in webdynpro page header using themes

    hi all,
             I have created  a webdynpro page. how to change the color webdynpro page header using themes.
    where to make changes in the themes.
    Regards,
    Shanthakumar

    Hi
    Check it out
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3ea0d790-0201-0010-80b8-b680496a3838
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d2b1d790-0201-0010-25b7-d1fb059a8ad9

  • Populate sharepoint2013 document library coloumns using infopath2013 form

    Hi
    Is it possible to populate sharepoint2013 document library columns using Infopath2013 forms?
    A form created in info path is published to the document library.
    As default when you create a new form from the library - fill it and then you can save the form and are presented with pop-up-box where you type inn the filename. This data (Filename) is stored under the library  column "Name" for the form-file.
    However it would be terrific if the user also had to input data in the other columns . These columns are required* in the library.
    Im a total newb at infopath, any help would be much appreciated!
    And showing how would be very nice too!
    brgs
    bjorn

    By mapping fields on the infopath form to the sharepoint list/library (column type basic text), I could populate the metadata columns as i wanted.

  • Using external trigger channels with PCI-1422

    I need to trigger some 5 volt relays with my PCI1422 board similar to the way it is done with digital I/O on a standard board. Can this be done using the trigger channels? I have tried this and only get a 2V state change...

    Hi,
    How much current are your 5V relays pulling? Have you tried to measure the voltage change on your 1422 trigger lines with a Voltmeter without connecting it to the relays? The Trigger lines on the 1422 should give a 5V TTL signal, so something must be pulling that signal down.
    Hope this helps.
    Morten Jensen
    National Instruments

Maybe you are looking for

  • [Feature Request] Seperate tab in log window for System.err

    By default, the stack traces of exceptions (and throwables in general) are printed to the System.err stream. So, wouldn't it be useful to include a 2nd tab for System.err messages? It could be optional to either include or leave out the System.err ou

  • My Face Time APP went missing. Where can I find it or get it back?

    I Have an iPad 2 with IOS 8.1.3 . Capacity 13.4 GB. Since updating from IOS 8 to IOS 8.1.3 my Face Time app has Belén removed. Can antoje tell me hete i can get it back? Thanks everyone!   Diane.

  • Strange behavior when using Runtime.exec() to run batch file

    I've been struggling with this for hours. I have a Swing application which upon clicking a button, I want to execute a batch file. This batch file itself uses a command window. When I use Runtime load = Runtime.getRuntime(); load.exec("cmd /c start c

  • WRT110 losing wireless connectivity periodically

    My new WRT110 loses all wireless (and wireless only) client connectivity just abougt everyday. It just drops out and is no longer an observable wireless network. A quick reboot of the router fixes it but that's a quick reboot I don't want to do. I us

  • Exp-01017 invalid username/password

    Hello, all; I'm trying to do daily exports of a database on 8.1.5. A few months ago we had to reinstall the Oracle software and get the database running again from an export. Ever since then we've had problems doing the daily exports like we used to.