Populating the Addressee field using Customer Interface program

Hello All,
Can any body tell me how to populate the "Addressee" column in the HZ_Party_Sites table using Customer Interface Program. Which field should be populated in RA_Customers_Interface_All table inorder to populate the "Addressee" field.
Thank you,
Vijay

You can post this thread in this
Customers as well.
Thanks
GM

Similar Messages

Variables in BPS populating the template built using web interface builder

Hi All,
I have a issue :
I created some variables in bps0 (under a planning area) based on Fiscal Year, Fiscal Year/Period, Posting Period, Cal. Yr /Quarter and Version.
Then I created a template using the web interface builder .
The end user goes and puts the varaibels in the SEM template and that will run the BW queries in BW (ABAP code has been written to popluate the values entered in SEM tempalte in to BW variable screen).
Now the problem is it works well for all values other than for #(not assigned).
What should be done to make it work even for #?
We do not have # as the value in master data for all the above info objects. We have # only for 0version and for the rest I can't even see the master data as it says " master data is not maintained" .
when I come back and look in bps0 then I see that the values entered in the SEM template are getting accumulated in selection conditionds in bps0 (when we click on the variable then when we see the selection conditions there it is getting accumulated)
Can anyone please suggest a solution to make the # (not assigned) work and to clear the selection conditions table after refresh of the SEM template?
Thanks
Sri

Hi
You should create a BEX Web Query and integrate it in the upper level of WEB Layout.
Check this link for a step by step guide about this topic
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/how-to%20guides%20-%20rig%20official/bi/nw04/how%20to%20integrate%20bex%20web%20applications%20into%20bps%20web%20interfaces.doc
Ciao
Andr

Custom PL/SQL API that inserts the data into a custom interface table.

We are developing a custom Web ADI integrator for importing suppliers into Oracle.
The Web ADI interface is a custom PL/SQL API that inserts the data into a custom interface table. We have defined the content, uploader and an importer. The importer is again a custom PL/SQL API that will process the records inserted into the custom table and updates the STATUS column of the custom interface table. We want to show the status column back on the spreadsheet.
Defined the 'Document Row' import rule and added the rows that would identify the unique record.
Errored row import rule, we are using a SELECT * from custom_table where status<>'Success' and vendor_name=$param$.vendor_name
The source of this parameter is import.vendor_name
We have also defined an Error lookup.
After the above setup is completed, we invoke the create document and click on Oracle->Upload.
The records are getting imported, but the importer program is failing with An error has occurred while running an API import. The ERRORED_ROWS step 20003:ER_500141, parameter number 1 must contain the value BIND in attribute 1.'

The same issue.
Need help.
Also checked bne.log, no additional information.
<bne:document xmlns:bne="http://www.oracle.com/bne">
<bne:message bne:type="DATA" bne:text="BNE_VALID_ROW_COUNT" bne:value="11" />
<bne:message bne:type="DATA" bne:text="BNE_INVALID_ROW_COUNT" bne:value="0" />
<bne:message bne:type="ERROR" bne:text="An error has occurred while running an API import"
bne:cause="The ERRORED_ROWS step 20003:ER_500165, parameter number 1 must contain the value BIND in attribute 1."
bne:action="" bne:source="BneAPIImporter" >
<bne:context bne:collection="collection_1" />
</bne:message><bne:message bne:type="STATUS"
bne:text="No rows uploaded" bne:value="" >
<bne:context bne:collection="collection_1" /></bne:message>
<bne:message bne:type="STATUS" bne:text="0 rows were invalid" bne:value="" >
<bne:context bne:collection="collection_1" /></bne:message></bne:document>

Populating the Signature field of OIM UPA table

The OIM UPA table has a SIGNATURE field which customers can use for storing digital signature of the snapshot (for non-repudiation purposes).
By default - the value of this field is "NULL" in the database.
Did not find any documentation on how this field is populated.
Has any one made use of this non-repudiation feature.
Thanks,
Chetan

If you want this functionality it is actually not that hard to create a scheduled task that populates the signature field using a third party non repudiation provider.
Doing local non repudiation is per definition non useful so you do need a trusted third party (i.e. Guardtime (http://www.guardtime.com/)) that provides the service.
Best regards
/Martin

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

API's used in Interface programs of Oracle Applications

hi
can any one let me know about the PL/SQL API's that are used in interface programs of oracle applications.
in what cases we are using them
and if possible their syntax
thanks in advance
bye

Pl Sql APIs are used for uploading / correcting the mass Data of Oracle HRMS and Oracle Payroll , For Technical person they are Fast and Easy for data Migration Purpose
You Can Seach more on Metalink.
You can search these APIs from your Data Base where name like '%API'

Tools to list all table-field used by a program

Hello everyone
Is there any available tool providing the list of fields used by a program?
There are several tools to list the tables used by a program but I need to have a list of the fields of those tables.
Here is a scenario.
DATA: lv_matnr TYPE matnr.
SELECT SINGLE matnr INTO lv_matnr FROM mara WHERE mtart = 'FERT'
WRITE:/ lv_matnr.
The list should contain the following information:
MARA-MATNR
MARA-MTART
Because both fields are used by the program. None of the other fields of the table mara should be listed.
Regards
dstj

All BlackBerry device use the same APN blackberry.net. This is unique accross all carrier.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Stop thunderbird from automatically populating the To: field when replying

Is there a way to stop Thunderbird from automatically populating the To: field when replying to an email?.
Also is there a way to get Thunderbird to request confirmation of addresses emails are to be sent to?

'Reply' is supposed to do exactly that. Use 'Forward' instead.
Wrt return receipts check this article.
http://kb.mozillazine.org/Figuring_out_whether_the_recipient_read_your_message

To read all the database fields used in a Crystal report 10 file using Vb 6 Code

Hi
Iam in development of an Application in Visual basic which lists all the
database fields used in a particular report (crystal 10)
In simple i need to show all the checked fields in the database fields section in field explorer section of the crystal report file.
regards
venkateshG

Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

What are the key fields used to group double orders in t-code SDD1?

What are the key fields used to group double orders in t-code SDD1?
Cheers,
VT

Hi,
You can group the duplicate sales documents with the help of the following fields,
Sold-To-Party,Document type,date and sales area details.
Regards,
Gopal.

Communication between thread in the same process using file interface.

Hi,
I am developing driver and i need to communicate between two thread.
>can anyone guide me on implementing communication between two thread in the same process using File Interface. First thread will be driver and second will be application.I need to send IOCTL like commands using File interface ie is WriteFile(),ReadFile()
from Host process to driver through file-interface(which run's in driver context).Host process should not be blocked for the duration of the driver to process the command.
>File-interface will run in driver context and it will be responsible to receive command from application and pass it to the driver.
what are the complexity introduced?
>Can anyone also give me the link/reference to get more information on this topic?
>How to replace IOCTL command's for instance baud _rate change command with a file interface for example with IRP.

Here is the detailed query:
Hardware Abstraction Layer will interact with Driver(Both will be running in complete different process) .there is a IOCTL for command and File interface for read and write.
My requirement is:
Both should run in the same process so HAL will run as one thread and driver as another thread in the same process .I don't want HAL to wait for completion of request and also i don't want driver to be blocked .
We are planning to use a File Interface for communication between Hardware abstraction layer and Driver
HAL will send the command or read/write operation to a file interface and driver will get the command or read/write request from the File interface
There is a flexibility to change Hardware Abstraction layer and also the Driver
Is it possible to use IOCTL between two thread under same process? if not what other options do we have.
Can we use File interface to send command (like IOCTL) between two thread?

Hashing of the password field using MD5 and then store in the XML

Hi,
I need to design a form with User ID and a Password field. When i extract the XML from the form i need to hash the password field using MD5 and then store it. Does anyone have some kind of experience in doint it. Can you please suggest some way to do it.
Thanks,
Sayoni.

Hi,
To hash password you can use function from http://kevin.vanzonneveld.net/techblog/article/javascript_equivalent_for_phps_md5/ or try to find another implementation. Just call this function on some event like button click for example.
Also I made some example. See attach.
BR,
Paul Butenko

Populated the new field with historic data

HI,
I have a data for 2 years now I am enhancing the data source how can I populated the new field with historic data.Is it by
1)deleting all the data in BW side and the doing an init then setting up a regular delta
2)running a repair full request with selection condition.
or is there any other option available? which is the best scenario to load these historic data?
Regards,
Ravi

Hi,
I think your datasource is already in production, and you want to data only from today onwards for enhanced fields, i.e. historical data is not required for enhanced fields..
1.Fix ECC down time for 20 to 30 munities
2. Keep all objects on Qty system in ECC and BW.
3.Run Delta laods in BW for 2 to 3 times.So with this step you can clear SMQ1 and RSA7. Check the entries in RSA7, if it is ZERO then it is fine.
4. Move DS from ECC Qty to ECC PROD .
5. Replicate in BW.
6. Move all BW objects from BW Qty to BW Prod.
7. Delete Init load in InfoPackage level (Not in ODS/CUbe).
8.Load Init without DataTransfer.
9.Then Run Delta.
10. Next day on wards deltas will come as usual.
If you need Historical data also.
1.Delete data in Cube.
2.Fix Down Time and load Init then Delta.
Check
SAP Note 328181 - Changes to extraction structures inCustomizing Cockpit
Thanks
Reddy

Custom Interface Program Errors out with ORA-01722: invalid number in R12

Hi,
We were upgrading to R12 in which our custom interface load program errors out with "ORA-01722: invalid number". Please find structure of control file as below :
LOAD DATA
APPEND
INTO TABLE RRAT_RCAP_GIO_MAN_ADJ_STG
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED by '"'
TRAILING NULLCOLS
PERIOD_NAME CHAR "ltrim(rtrim(:PERIOD_NAME))"
,SOURCE_TYPE CHAR "ltrim(rtrim(:SOURCE_TYPE))"
,ADJ_ACCOUNT CHAR "ltrim(rtrim(:ADJ_ACCOUNT))"
,USD_NET INTEGER EXTERNAL
,ERROR_CODE CONSTANT 'LOADED DATA'
,PROCESS_FLAG CONSTANT 1
,CREATED_BY "fnd_global.user_id"
,CREATION_DATE sysdate
,LAST_UPDATED_BY "fnd_global.user_id"
,LAST_UPDATE_DATE sysdate
,LAST_UPDATE_LOGIN "fnd_global.login_id"
,REQUEST_ID "fnd_global.conc_request_id"
=====================================Log file ================
Record 1: Rejected - Error on table "XXATORCL"."XXAT_VCAP_GIO_MAN_ADJ_STG", column USD_NET.
ORA-01722: invalid number
===================sample file ==========================
JUL-11,Manual,8213-880011-00000000-259390-1Z-0000-0000,1001
JUL-11,Manual,8213-880011-00000000-253701-1Z-0000-0000,73
==========================================
I had tried with last successfully uploaded file as well which is also now not uploading.
Please help me in this issue.
Thanks,
Piyush

i am using R12 now. Please avoide INTEGER EXTERNAL part from the control file. please refer below :
LOAD DATA
APPEND
INTO TABLE RRAT_RCAP_GIO_MAN_ADJ_STG
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED by '"'
TRAILING NULLCOLS
PERIOD_NAME CHAR "ltrim(rtrim(:PERIOD_NAME))"
,SOURCE_TYPE CHAR "ltrim(rtrim(:SOURCE_TYPE))"
,ADJ_ACCOUNT CHAR "ltrim(rtrim(:ADJ_ACCOUNT))"
,USD_NET
,ERROR_CODE CONSTANT 'LOADED DATA'
,PROCESS_FLAG CONSTANT 1
,CREATED_BY "fnd_global.user_id"
,CREATION_DATE sysdate
,LAST_UPDATED_BY "fnd_global.user_id"
,LAST_UPDATE_DATE sysdate
,LAST_UPDATE_LOGIN "fnd_global.login_id"
,REQUEST_ID "fnd_global.conc_request_id"
====================
Srini,
Just one thing i want to explain you that previously it was working fine but suddenly (might after upgrading in R12) started giving error. I had tested with old data files also which were loaded successfully in the system. but now it is giving error. Please help me in this issue.
Regards,

Search help is populating the input field with wrong data

Hi Guys,
I have created a ZCITY table for which has below 2 field
ZZCITY (Code ) (5 Char) u2013 Key field
ZZNAME (City Name ) (40 Character)
I have added a custom field ZZCITY & ZZNAME in CI_CATSDB. Funtional guy has configured to make ZZNAME as VISIBLE and ZZCITY is HIDDEN on CAT2 screen in Data Entry area.
I created search help on table ZCITY with export parameters as ZZCITY and ZZNAME.
In SE11, I have mapped the export parameters with CI_CATSDB
Now in tcode CAT2, when I press F4 on City Name field, the list is displayed with City code and City names. And when I select any city code, the ZZNAME is populated by City code instead of City name.
I want that City Name should be populated in ZZNAME and City Code should be populated in hidden field ZZCITY.
Please tell me how I can fix this problem.
Thanks in advance.
mini

Hi
Try selecting the Improting Check box aswell. if a screen field is hidden or display mode we can not use F4 help for that field.
you can also take the help of DYNP_READ_VALUES to get the selected value before PAI
Check whats happening in Debug.
Cheers
Ram

Populating the Addressee field using Customer Interface program

Similar Messages

Maybe you are looking for