Popup dialog restricted to parent area

Hi
I need a dialog to prompt the user with some data (text box, radio buttons...), but I want it to be relatively positioned to the component I used to trigger it and, most important, the dialog must be confined inside the area of my application.
In this case I'm creating an applet, and both Popup and JDialog are "real" popups, and can be outside the area of my applet, which is not what I need. Putting a JDialog in place through positioning is not enough too, because the user may scroll the page, and I need the popup to remain in place inside the applet.
In other words, what I need is much like a tooltip, but with more than just text.
Any help is appreciated!
Thanks!

You're welcome.
I didn't knew about JTabbedPane, but that's exactly what I need. ;-)Err... that's JOptionPane :o)
And, by a look at the API or in the relevant [tutorial chapter|http://java.sun.com/docs/books/tutorial/uiswing/components/dialog.html#features] , you'll find out that a JOptionPane instantiated through its constructor, although it provides a reasonable dialog form, will miss a title. To show the title, you'd have to use either of the JOptionPane.showXXX() methods, or a JOPtionPane instance method createDialog(). Both ways turn out creating a regular JDialog, whose location can be dragged outside of the parent area.
So, if the dialog title is not a requirement, you can use my suggestion straight.
Otherwise, you'll have to consider additional coding; a quick list of suggestions:
1) add a title manually. It may be hard to provide a title that looks exactly like a regular JDialog's title, but as a strating point you can provide your own "title-like" Border (N.B.: the default TitledBorder does definitely not look like a dialog's title).
2) consider using JInternalFrames and dialogs. That however forces a, possibly contrieved, structuring of your UI, where your current applet's content panel should be located instead in a single JInternalFrame of a JDesktopPane, itself becoming the applet's contentPane. The dialog would then be shown via a myJOptionPane.createInternalFrame(). However, I am unsure about the modality of the internal "dialog" in this case.

Similar Messages

Create a confirmation popup dialog when submitting a form

Hi all,
I have a simple business : ask a question (yes/no) to a user when he is submitting a form.
This form is an "ADF Form (11g)" and is displayed in a inline dialog. It is triggered for an EntityView when user clicks on an edit button of a table row.
I've tried lot of different solutions but it never works.
Let me tell you about these:
Solution 1: Adding a showPopupBehavior
    <af:document id="d1">
      <af:messages id="m1"/>
      <af:form id="f1">
        <af:panelFormLayout id="pfl1">
          <af:inputDate value="#{bindings.Datedeb.inputValue}" label="From:" required="#{bindings.Datedeb.hints.mandatory}" shortDesc="#{bindings.Datedeb.hints.tooltip}" id="id2">
            <f:validator binding="#{bindings.Datedeb.validator}"/>
            <af:convertDateTime pattern="#{bindings.Datedeb.format}"/>
          </af:inputDate>
       
          <f:facet name="footer">
            <af:group id="g1">
              <af:commandButton text="Submit" id="cb1">
                <af:showPopupBehavior popupId="p1" />
                <af:returnActionListener/>
              </af:commandButton>
              <af:popup id="p1">
                <af:dialog id="d2" title="Assistance" type="yesNo" dialogListener="#{backingBeanScope.dialogBackingBean.mustClosePreviousAddress}">
                  <af:outputText value="Do you want to close the previous adress automatically ? " id="ot1"/>
                </af:dialog>
              </af:popup>
            </af:group>
          </f:facet>
        </af:panelFormLayout>
      </af:form>
    </af:document>The issue is that the +<af:returnActionListener/>+ is never triggered and the form do not close.
Solution 2: Adding a showPopupBehavior and change the triggerType
    <af:document id="d1">
      <af:messages id="m1"/>
      <af:form id="f1">
        <af:panelFormLayout id="pfl1">
          <af:inputDate value="#{bindings.Datedeb.inputValue}" label="From:" required="#{bindings.Datedeb.hints.mandatory}" shortDesc="#{bindings.Datedeb.hints.tooltip}" id="id2">
            <f:validator binding="#{bindings.Datedeb.validator}"/>
            <af:convertDateTime pattern="#{bindings.Datedeb.format}"/>
          </af:inputDate>
       
          <f:facet name="footer">
            <af:group id="g1">
              <af:commandButton text="Submit" id="cb1">
                <af:showPopupBehavior popupId="p1" triggerType="click" />
                <af:returnActionListener/>
              </af:commandButton>
              <af:popup id="p1">
                <af:dialog id="d2" title="Assistance" type="yesNo" dialogListener="#{backingBeanScope.dialogBackingBean.mustClosePreviousAddress}">
                  <af:outputText value="Do you want to close the previous adress automatically ? " id="ot1"/>
                </af:dialog>
              </af:popup>
            </af:group>
          </f:facet>
        </af:panelFormLayout>
      </af:form>
    </af:document>By reading in your forum I find this solution to be able to initiate a popup and execute the commandButton action by adding the triggerType="click" on the showPopupBehavior.
The issue then is that the dialog get closed without waiting for a user response on the popup dialog (yes/no)
Solution 3: Adding aAdfFacesContext.getCurrentInstance().returnFromDialog(null, null); in my dialog listener
    <af:document id="d1">
      <af:messages id="m1"/>
      <af:form id="f1">
        <af:panelFormLayout id="pfl1">
          <af:inputDate value="#{bindings.Datedeb.inputValue}" label="From:" required="#{bindings.Datedeb.hints.mandatory}" shortDesc="#{bindings.Datedeb.hints.tooltip}" id="id2">
            <f:validator binding="#{bindings.Datedeb.validator}"/>
            <af:convertDateTime pattern="#{bindings.Datedeb.format}"/>
          </af:inputDate>
       
          <f:facet name="footer">
            <af:group id="g1">
              <af:commandButton text="Submit" id="cb1">
                <af:showPopupBehavior popupId="p1" triggerType="click" />
              </af:commandButton>
              <af:popup id="p1">
                <af:dialog id="d2" title="Assistance" type="yesNo" dialogListener="#{backingBeanScope.dialogBackingBean.mustClosePreviousAddress}">
                  <af:outputText value="Do you want to close the previous adress automatically ? " id="ot1"/>
                </af:dialog>
              </af:popup>
            </af:group>
          </f:facet>
        </af:panelFormLayout>
      </af:form>
    </af:document>
public void mustClosePreviousAddress(DialogEvent dialogEvent)
    //Business logic
    AdfFacesContext.getCurrentInstance().returnFromDialog(null, null);
}It looks like it work and close the dialog when click on yes/no on the popup dialog but the value are not submitted and the data model do not change.
Solution 4: Sendind an ActionEvent on the button when user has made his selection
    <af:document id="d1">
      <af:messages id="m1"/>
      <af:form id="f1">
        <af:panelFormLayout id="pfl1">
          <af:inputDate value="#{bindings.Datedeb.inputValue}" label="From:" required="#{bindings.Datedeb.hints.mandatory}" shortDesc="#{bindings.Datedeb.hints.tooltip}" id="id2">
            <f:validator binding="#{bindings.Datedeb.validator}"/>
            <af:convertDateTime pattern="#{bindings.Datedeb.format}"/>
          </af:inputDate>
       
          <f:facet name="footer">
            <af:group id="g1">
              <af:commandButton text="Submit" id="cb1" binding="#{backingBeanScope.dialogBackingBean.cb1}">
                <af:showPopupBehavior popupId="p1" />
                <af:returnActionListener/>
              </af:commandButton>
              <af:popup id="p1">
                <af:dialog id="d2" title="Assistance" type="yesNo" dialogListener="#{backingBeanScope.dialogBackingBean.mustClosePreviousAddress}">
                  <af:outputText value="Do you want to close the previous adress automatically ? " id="ot1"/>
                </af:dialog>
              </af:popup>
            </af:group>
          </f:facet>
        </af:panelFormLayout>
      </af:form>
    </af:document>
public void mustClosePreviousAddress(DialogEvent dialogEvent)
    //Business logic
    cb1.queueEvent(new ActionEvent(cb1));
}The same as foor the third solution, it looks like it work and close the dialog when click on yes/no on the popup dialog but the value are not submitted and the data model do not change.
I've verified with an actionListener, the actionEvent received when the user click on the button is exactly the same as the one i've dispatched manually.
Can you help me with a solution adressing this issue?
Best regards,
Alex

Mmm something like this ?
    public void newDialogListener(DialogEvent dialogEvent) {
        if (dialogEvent.getOutcome().name().equals("ok")) {
            this.getBindings().getOperationBinding("Commit").execute();
                // Do something
    }

Form reset on clicking 'OK' in the popup dialog.

hi,
Use case :
Need to open a popup dialog on clicking the command button in the page.On clicking on 'OK' in the popup dialog,need to reset the form in the parent.
i dont want to use a managed bean for the same. Need to achieve the use case by using Java script.
In the below example need to reset the value in the input text.
Code :
<af:document id="d1">
<af:form id="f1">
<af:inputText label="Label 1" id="it2"/>
<af:commandButton text="Click" id="cb1">
<af:showPopupBehavior triggerType="action" popupId="dialog"/>
<af:clientListener method="showPopup" type="action"/>
</af:commandButton>
<af:panelGroupLayout id="pgl1">
<af:popup id="dialog" contentDelivery="lazyUncached" >
<af:dialog title="test" rendered="true" type="ok" id="d2" resize="on" contentHeight="100" contentWidth="100" closeIconVisible="false" >
<af:outputLabel id="it1" value="Hello World"/>
</af:dialog>
</af:popup>
</af:panelGroupLayout>
</af:form>
<af:resource type="javascript">
function showPopup(event)
var source = event.getSource();
var popupId = "dialog";
var popup = AdfPage.PAGE.findComponentByAbsoluteId(popupId);
if (!popup.isPopupVisible())
var hints = {};
hints[AdfRichPopup.HINT_LAUNCH_ID] = source.getClientId();
hints[AdfRichPopup.HINT_ALIGN_ID] = source.getClientId();
hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
popup.show(hints);
</af:resource>
</af:document>
Thanks
Prafull

Sorry, I, for one, refuse to provide a hack solution - why do you insist on fighting the framework instead of using it the way it should be?
Yes, I can understand - if there is a declarative way to do something, avoid writing code in a managed bean, that's fine.
But using JavaScript instead of a managed bean - you are setting yourself up for a lot of pain.
The proper, correct, standard, most common way to do this would be via a managed bean.
The hackish, misguided, least appropriate, most prone to breaking way to do this would be via JavaScript.
John

How to re-show a dialog with the parent window

I am writing an Menu drivern application:
-- A JCMDIPane is put in the JFrame.
-- Multiple JCMDIFrames are added to the JCMDIPane via menu selecting events
-- Each JCMDIFrame (call it parent) may pop up a Dialog window (child) (Thes dialogs are modal)
Here is my problem:
When you switch away from this Java application to other applications (reading mauls, editing word documents, surfing web), of course, the Java program is hiding behind these applications and only left a Icon on your taskbar. The problem is that when switch back from other application to this Java program, However, it only shows the parent window (the JCMDIFrame ) and the child (the dialog) is behind. You have to using Alt_Tab to get the focus on the child and show it.
My question is:
Is there any way can we show the Dialog window is on the parent window (as it originally shown)?
I have tried to overwriting the paint method of JCMDIFrame :
public void paint(Graphics g)
super.paint(g);
if(child != null && child.isShowing())
child.setVisible(true);
This works on other applications but not on the Internet Explore (It always show the dialog).
Anybody can give me a clue?
Thanks!

When you pop up a dialog, if you use the constructor:
Dialog(Frame owner, boolean modal);
and pass it an instance of the parent frame (and set "modal" to "true"), then it is my understanding that it should always appear in front of the parent - are you sure this is what you are doing?
Double check by doing myDialog.getOwner() and make sure it's not null.

I am trying to set up a child account where websites are restricted unless they are on the approved list, however youtube is still allowed. How do I block youtube?

I am trying to set up a child account where websites are restricted unless they are on the approved list, however youtube is still allowed. How do I block youtube?

Hello jmkibert,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mavericks: Set up parental controls
http://support.apple.com/kb/PH14414
Web > try to limit access to adult websites > customize > never allow these websites.
Have a nice day,
Mario

Acquire data from a tab delimited file using a popup dialog object on a stamp

I am trying to import data from a tab delimited file using a popup dialog object on a stamp. I have purchased the book by Thom Parker--All About PDF Stamps in Acrobat and Paperless Workflows and have been working through the examples in the appendix.
My problem is understanding how to bring the data into the dialog object from the file.
I don't want to plagiarize his book--so am electing at this time not to show my code. The script is reading the file, just not bringing in the records from the file so that I can select which line to import into the stamp.
I have typed in the code exactly how the book describes, but when the popup dialog object is selected, there is nothing in the drop-down. When I click OK, the first record is put on the stamp--except for the fields that I am wanting to appear in the dialog object popup box.
I have searched the forums, and also the JavaScript reference. There are examples of the popup dialog object, but none of them show how to import the data from a file--just for the items to be typed in as the list.
Any help would be greatly appreciated! i have been trying to work on this for several months now.

Karl
Thank you for getting back with me!
In answer to your questions:
1. Your trusted function is not a trusted function. Did you put this
function into a folder level script so that it will get executed at system
startup?--
yes--I saved the script as a .js file and put it in the following path (I have Acrobat XI Pro for Windows)
C:\Documents and Settings\tjohnson\Application Data\Adobe\Acrobat\Privileged\11.0\JavaScripts\GetTabData.js
2. The script cannot find your tab delimited data file, or it cannot
extract the data. Did you add the data file in the correct location? The
location from the script in the book would be c:\mydata\Contacts.txt
Yes--the file is in the same path as the book.
Below is my code that references the file.
var cPath = "/c/mydata/Contacts.txt";
the slashes in the book go in the direction of the text above--should they go in the direction that you have in your question?
Also, the name and email address need to be separated by one Tab character.
They are.
3. The fields need to be named the same way as the columns in the data file (the two names are in the first line of the file).
My headings are RevByFromTab and EmailFromTab--which match the names of the two fields on the stamp.
So, check that you are not getting any errors in the JavaScript console
(Ctrl-J or Cmd-J), and verify that the tab delimited file is in the correct
location
When I run in the java script console--and I just run the script on the stamp,
it says
TypeError: event.source is null
17:Console:Exec
undefined
When I place the stamp on the page, the popup box is working, but when you click on the down arrow, there is nothing listed. When I click OK, the RevByFromTab is populated by the first item in the file, but the EmailFromTab field says undefined.
Thank you
Message was edited by: tdjohnson7700

Close ADF Popup Dialog with html button in Inline Frame

hi,
I'm using jdev 11.1.1.2,
I have a adf popup dialog which contains an Inline Frame(source is a jsp file).I want to close the dialog with a html submit button in the frame page. when the submit button is clicked, auto close the dialog.
can anyone help in this.
Thanks

Try to close the popup from Javascript using a sciptlet similar to the following one:
var popup = AdfPage.PAGE.findComponent('<yourPopupClientId>');
if (popup.isPopupVisible()) {
popup.hide();
}where <tt><yourPopupClientId></tt> should be replaced with the popup's client ID. The client ID is composed of the popup's ID from the <af:popup> tag preceded with IDs of the eventual parent naming containers where the popup has been declared.
For example, if the tag is <tt><af:popup id="myPopup"></tt>, then the clientId might be:
<tt>  myPopup
  container1:myPopup
  container1:container2:myPopup</tt>
... and so on, depending on where you have defined the popup in your JSF page (i.e. within which naming containers), you should determine it first.

How to make panel collection with auto width and height in popup dialog ?

Hi,
I have ony af:popup in that I have added af:dialog. And in this af:dialog I have added af:table which is surrounded by af:panelCollection.
Means my popup structure is like as below
af:popup
af:dialog
af:panelCollection
af:table
If I set resize="on" in af:dialog then I can able to resize my popup dialog but the panelCollection inside the af:dialog is not become auto adjusted.
I am able to make panelCollection width auto adjusted by using AFStretchWidh style class but not able to adjust its height.
Hope you can understand my problem and pls try to provide me its solution if you have already implemented this.
Regards,
DevD

I believe you are using af:panelGroupLayout because there are some other components except af:panelCollection, so try this combination
<af:popup id="p1">
<af:dialog id="d2" resize="on" stretchChildren="first">
    <af:panelStretchLayout id="psl2">
      <f:facet name="bottom"/>
      <f:facet name="center">
        <af:panelCollection id="pc1">
          <f:facet name="menus"/>
          <f:facet name="toolbar"/>
          <f:facet name="statusbar"/>
          <af:table var="row" rowBandingInterval="0" id="t1">
            <af:column sortable="false" headerText="col1" id="c1">
              <af:outputText value="#{row.col1}" id="ot5"/>
            </af:column>
            <af:column sortable="false" headerText="col2" id="c3">
              <af:outputText value="#{row.col2}" id="ot4"/>
            </af:column>
            <af:column sortable="false" headerText="col3" id="c2">
              <af:outputText value="#{row.col3}" id="ot3"/>
            </af:column>
            <af:column sortable="false" headerText="col4" id="c4">
              <af:outputText value="#{row.col4}" id="ot2"/>
            </af:column>
            <af:column sortable="false" headerText="col5" id="c5">
              <af:outputText value="#{row.col5}" id="ot1"/>
            </af:column>
          </af:table>
        </af:panelCollection>
      </f:facet>
    </af:panelStretchLayout>
</af:dialog>
</af:popup>Put only af:panelCollection in CENTER facet of af:panelStretchLayout and use other facets of af:panelStretchLayout for other components.

Cancel / Reset links in popup dialog

Hi, I'm new to ADF 11g (using Jdeveloper 11.1.1.4.0) so this is probably an easy question. I have a popup dialog (using <af:popup>, <af:dialog>), and in the dialog, I want to have Cancel and Reset links. I know that if I set the type attribute of <af:dialog> to "cancel", I could get a Cancel button for free. But I want to have a Cancel link instead of a button so I have the type attribute of <af:dialog> set to "none" to not show any of the default buttons. How could I best implement a Cancel link as a commandLink or goLink? The documentation for <af:dialog> at http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_dialog.html says this about the cancel button behavior and I just want to have the same for my Cancel link:
The ESC key, "cancel" button and close icon queues a client dialog event with a "cancel" outcome. Dialog events with a "cancel" outcome will not be sent to the server.
Also, I want to have a Reset link in my dialog that just resets the form fields in the dialog. How would this be done? I saw that there's a <af:resetButton> component available, but this renders as a button and again I want to have a Reset link instead of a button.
Thanks.

Ok, this worked for me:
<af:resource type="javascript">
function closePopup(actionEvent) {
var eventSource = actionEvent.getSource();
var popup = eventSource.findComponent("p1"); // p1 is the id of my popup
popup.hide();
actionEvent.cancel();
</af:resource>
<af:commandLink text="Cancel" id="cl1" partialSubmit="true">
<af:clientListener type="click" method="closePopup"/>
</af:commandLink>
Interestingly, I found that if I did not have partialSubmit="true" on the commandLink, then the popup would disappear on its own. I did not even have to have a clientListener on the commandLink. I guess this is due to the following mentioned at http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_dialog.html
Using partial submit custom buttons is recommended because by default, a popup will not restore visibility after a full postback. The immediate parent (af:popup) controls this behavior. If the parent popup's autoCancel property is enabled, full submit commands will cause the popup dialog to auto-dismiss. When the autoCancel property is disabled, full submit commands will restore visibility on postback. See the af:popup tag documentation for more information on controlling aspects of auto-dismissal.
Does anyone know what the difference between using popup.hide() and popup.cancel() would be in the above javascript? They seem to have the same effect. Also, do I really need to have actionEvent.cancel() in the above javascript? I have seen that in some other examples, but not really sure if it's really necessary as having it there or not there doesn't seem to make a difference either.

Popup Dialog taskflow

hi all,
I want to go one page to another page using popup dialog.
i try some thing like in the following link http://blogs.oracle.com/DavidGiammona/.
but popup dialog come up with "The website cannot display the page" and i found the following javascript error.
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729)
Timestamp: Thu, 21 Jan 2010 05:17:21 UTC
Message: Access is denied.
Line: 14012
Char: 2
Code: 0
URI: http://127.0.0.1:7101/stars21-web-context-root/afr/partition/ie/default/opt/boot-SHEPHERD-PS1-9296.js
Is there any other way to use taskflow inside popup?
with Regards,
WP

I currently use task flows inside of popups. Here are a couple criteria though
1. Your task flow will have to be fragments.
2. One the task flow that will open up inside the popup, you will need to change some of the attributes:
Run as Dialog => true
Display Type => dialog
The link that will transfer control to the task flow can be setup like:
UseWindow => true
WindowEmbedStyle => inlineDocument
and then specify the modality of the window etc. But that should be enough for you to get that working.
Any questions, let me know.

ER?: JSPX popup dialogs/windows and the JDev IDE

Hi JDev team
One thing I'm starting to find tedious in the JDev 11gTP4 IDE is when I have a JSPX page with a <af:popup> dialog/window, and I want to work with the popup rather than the rest of the page (say to drag n drop something into the popup in the editor window), I need to either search through the JSPX source code, or click down many levels in the structure window until I find the actual popup (....which if I then click on the popup node in the structure window, the editor window will display in the editor window).
Possibly I could do a search through the code searching for "popup", but if I have several popups this can also take sometime as I need to search 1 by 1.
As such, is there a shortcut I'm not aware of for navigating popups in a JSPX page, or alternatively could we raise an ER such that the Structure Window or similar shows an easily accessible, clickable list of popups and their ids available in the JSPX page please?
Cheers,
CM.

In addition to editing popups, Visual Editor also provides ways to edit ADF components which are clipped (ie., not fully visible in VE). Select the component which is clipped and select 'Design This Container' from the contextual action menu (small drop down menu on the top-right corner of the component). Visual Editor will show the component (and its hierarchy) in the visual editor.

Customize Popup dialog

hi,
i created a popup dialog. but i dont want the maximize and minimize options for that dialog.can anyone say how to do it?.

> can anyone say how to do it?.
Using a sack of potatoes.
Why?
Because a motorcycle has no doors.
Translation: You are not only asking this question in totally the wrong forum, it is devoid of any and all details to such an extent, one cannot even recommend what forum you should use. No language mentioned. No operating system. Pretty much nothing...

Creating AWT child dialog within a parent hangs in 1.7 but works with 1.6

Hi,
We are making use of Java AWT packages. In which we are creating an child dialog within a parent window and it hangs, meaning none of the buttons on the child window works, even the close is not happening (parent, child and console all hangs, need to kill the applet from the task manager). No error/exception is seen in the Console. No deadlocks noticed in the thread dumps.
This is seen only with JRE1.7 (update 10,11,13,15) version. But the same code is working fine with JRE 1.6 version.
We also have same codebase of next release, where the code is changed to Swings and that seems to work with JRE1.7.
Can somebody suggest me what might be causing it to fail with JRE_1.7 at the earliest as this a critical issue.
Thanks in advance!

We have a tuxedo service which needs to communicate with a POS device by socket. The parent process provides the tuxedo service. The child process provides the connection management for the device. Unnamed pipe is used for communication between the parent and the child. In the child process, there is no code related to tuxedo. The benefit of that design is the tuxedo server does not need to wait for connection from the device when boots up, and the tuxedo service does not need to wait for connection from the device when the service is called.
The tuxedo server was developed 10 years ago, and worked fine till we upgraded tuxedo from 10 to 12 recently. That means it worked for 10 years, and it worked in tuxedo 6.5, tuxedo 10. But in tuxedo 12, tmboot does not return for this tuxedo server. We have to press CTRL-C and yes to cancel. After cancel, the tuxedo service seems working fine.

Any way to apply "chapter markers" in uninterrupted playback (without popup dialog box) ?

Long story short: I hate the default marker color of olive green, especially since my current project is shot in nature so they are essentially visually invisible when I look at the timeline with thumbnails on. So it'd be nice to use chapter markers (I've given them a hotkey) since they're vibrant red. But when I use the keystroke, the marker options popup dialog box appears. Is it possible to disable the popup?
I use markers by adding them on the fly while watching all raw footage stringed together in a dedicated timeline (to quickly weed out select takes). This is a somewhat common technique amongst editors who learned from old "film" film editors (they did the same with workprints & a grease pencil). Currently I'm having to press "D" to select the current clip playing, and then press "M" (custom hotkey) to mark the take. It'd be nice to do so in a single button push… anyone know of such a way?
Of course, just letting us change the marker colors would be nice too. Btw, I already did feature requests for these.
This issue alone causes me to just do projects in FCP7 still. I'm trying to finally fully transition to Premiere Pro with this one, but this marker thing is killing me... Adobe peoples if you're reading this.

Hi Ann, thanks for the suggestions. As with a lot of editors, having just the video head displayed occupies every clip's duration when looking at a long timeline. And dealing with the chapter marker popup is a huge speedbump when we're talking about literally dozens of markers.
I posted my questions as a shot in the dark, assuming there was a 99.9% chance that there's no solution in Premiere, but I appreciate your info.

Automatically click OK or close LabVIEW popup dialog box

I am able to automate user actions on any front panels within the project by modifying its values (signaling) through VI References, but I can't figure out how to access a popup dialog box to automatically close it or click OK.
Is there a way to do this without replacing all LabVIEW built-in dialog box calls with a custom one?

Just curious, why automate user interactions? Why not have a "mode" you are in. If it's a user interaction mode, you do what the user chooses. If it's not set in user interaction mode, you just use a state machine to go to the next step, and you don't show the dialog.
My suggestion here seems much simpler then having value signaling propery nodes all over the block diagram.
CLA, LabVIEW Versions 2010-2013

Popup dialog restricted to parent area

Similar Messages

Maybe you are looking for