Popup not displayed with hierarchyViewer

here is the code I have used
<af:popup id="popupDialog" contentDelivery="lazyUncached">
<af:menu >
<af:commandMenuItem text="Accept" id="cmi1"
inlineStyle="text-align:left;"/>
<af:commandMenuItem text="Reject" id="cmi2"
inlineStyle="text-align:left;"/>
<af:commandMenuItem text="Override" id="cmi3"
inlineStyle="text-align:left;"/>
</af:menu>
</af:popup>
The below code is present in dvt:hierarchyViewer's node tag
<af:panelGroupLayout layout="vertical" halign="center"
inlineStyle="width:100%;" id="pgl2">
<af:showPopupBehavior popupId="::popupDialog"
triggerType="mouseOver"
align="afterStart" alignId="pgl2"/>
When mouseOver is done popup is not displayed.
Am I missing some thing.
Thanks
Naga

I take it you're an Oracle employee using a later JDev release than what's available publically? Oracle employees are asked to use the internal Oracle forums.
However can I make a suggestion that first you move your <af:showPopupBehavior> tag to a child of an <af:commandButton> and change the triggerType = "action", and see if that works. This will tell you have the basics working. Then try moving the <af:showPopupBehaviour> tag to a non DVT control, such as an image, and see if this works.
In addition how come you're <af:showPopupBehavior> popupId specifies colon-colon-popupDialog?
CM.

Similar Messages

Iphone 4 contact pictures do not display with incoming calls

iphone 4 contact pictures do not display with incoming calls. they did before the ios 6 upgrade

I am assuming that you have associated a picture with the contact in the information for the contact

Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

No on the book title, no problem there.
The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
Thanks for getting back to me.

Itunes store does not display with in the itunes player, why?

I have latest iTunes download. I have PC with Windows Vista. My system requirements are what they should be for the iTunes player. I have gone through all of the troubleshooting that i am willing to go through to make this work - Can someone !! Tell me why does the iTunes store NOT DISPLAY with in the iTunes Player?
I click on the iTunes Store from the iTunes player...center screen with in the player shows that its "Accessing iTunes Store" when its finishes - the screen remains blank! and stays like that...
Again why does the iTunes store not display with in iTunes?
Also , my Safari acts the same why...i open the browser and the Screen just sits there never finding, opening, or access anything from the web...YES I am connected to the internet? SO why does Safari sit there...

http://support.microsoft.com/kb/972034
This worked for me.
Reset HOSTS File back to defaults

Popup not displaying

I have created my new topic and added a new popup in my
topic. I generate my winhelp, open my help project, go to topic,
click popup and my popup window displays but you can only see the
title of the popup not the description.

Welcome to our community, Trish
I seem to recall from vague and distant WinHelp memory that
it's happening to you because the topic is formatted with a
non-scrolling region (NSR). If my memory is correct, the answer is
that you need to remove the NSR from the offending topic.
Cheers... Rick

Alert.show and popups not displaying text in flex4 compatibility

I'm using the Fx4 SDK in compatiblity mode to compile my Fx3 applications; everything seems ok, but for popups. No text is being displayed by any popup, not my custom titleWindow popped up with PopUpManager.createPopUp() nor my Alert.show boxes... Why could this be happening?
thanks,
gtb

To fix this I did the following:
1. remove the compatibility directive:
-compatibility-version=3.0
2. add as an additional compiler option the following directive
-theme PATH_TO_FX4SDK/frameworks/themes/Halo/halo.swc
3. change the namespace on my css file.
for the standard flex components:
@namespace "library://ns.adobe.com/flex/mx";
and for my custom components
@namespace "*";
finally make your application's framework conform to Flex4SDK.
gtb

Pge Template Popup not displaying the buttons

I assigned the template popup to a page. But now the button in that page is not displaying.
Any help?
Thanks
Deb

It's always helpful if you provide the following information up front with any question:
- APEX version
- DB version and edition
- Web server architecture (EPG, OHS or APEX listener)
- Browser(s) used
- Theme
- Templates
- Region type
I assigned the template popup to a page. But now the button in that page is not displaying.What is the purpose of this page? Is it actually a pop-up? Or just intended to have minimal structure? What button—what is its purpose? Is it in a region or item position? An HTML button or a template button?
The problem is not with the page template. while opening the page I am passing the printer friendly parameter as YES which I have to. And that i causing all the mess.Printer friendly mode typically applies some generic changes to how a page renders, one of which is not to show buttons.
Why do you have to have the page in printer friendly mode? And why do you want a button then to be displayed against normal convention?

Web catalog is not displayed, with the Office Ad-in 11g

Hi,
I'm working with the Oracle BI Add-in for Microsoft Office,
I can connect successfully to the office server,but when I try to select a report ,I can't beacuse the catalog is not displayed.
My office version is 2007. and I'm working with Oracle BI 11g
Thanks i...
Edited by: user13810056 on 16-may-2011 15:08

Hi thanks for the Info,
According to the page , I need to change the default port from 9704 to 7001 in the bioffice.xml.
That file should be located in this path :
C:\BI11g\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\_WL_user\bioffice_11.1.1\hsq62b\war\WEB-INF\
But I dont find the bioffice_11.1.1 folder inside the WLuser* folder
Instead I find a bioffice.xml file in this path:
C:\BI11g\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\bioffice_11.1.1\cvsibb\war\WEB-INF
Edited by: Andres on 17-may-2011 7:30

Emoticons Will not display with new version

Downloaded the new version, and now the (finger) and (wtf) emoticons will not display. Every single other one does display. Why is this happening? I have tried restarting my computer, and redownloading Skype itself. Is there any way to fix this? I know I have the emoticons display on because every one BUT those ones work.
Attachments:
Capture1.JPG ‏16 KB

These hidden emoticons indeed got removed with 6.14 because of them or their shortcodes having the potential to offend some users. Here's some feedback from users wanting it back, so feel free to show your support there if you are passioante about them: http://community.skype.com/t5/Windows-desktop-client-Ideas/Restore-6-13-set-of-emotes/idi-p/2958795
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Detail sections not displayed with Crystal Reports 2010 Runtime (SP1 also)

I have migrated a VB app from RDC 9 to Crystal Reports 2010 and I'm experiencing a very strange issue.
In a report with 6 nested groups, the detail part is splitted in 7 section, and the whole detail has the "keep together" flag activated. At runtime, some detail sections are not displayed. There is no suppress condition on the detail section. The missed sections are those near bottom of the page. I suppose that when there is no room to print the section on the page and it should go on the next page, Crystal forget to display it.
I exported the report in Crystal format and reopened with Crystal Reports designer and the missed section are displayed.
The same report is displayed correctly using RDC 9.
If I show the group tree and select the missed section group, the section is correctly displayed on a separate preview page.
I've some screenshot to better demonstrate the problem.
I hoped SP1 will resolve the issue but unfortunately it didn't.
Pier Alberto Guidotti

This issue has been escalated for a fix. tracking number is TE5000325237. For anyone wanting to attach to this thread with a similar issue, please note the behavior as decribed in the TE below. If the description does not match your issue exactly, please create a new thread.
Description - Steps to Reproduce;
1) Run the report in the CR 2008 designer - note the second page
2) Run the report in VS2010 app using CRVS2010 SP1:
CrystalReportViewer1.ReportSource = <path to report>
3) Look at page 2 and compare to page 2 from the CR2008 designer (also, see attached compare.jpg file which is a screen shot of both views) - note missing group on page 2
4) Export to PDF, DO, RTF - same issue
5) Print to printer using the viewer print button - same issue
6) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
crReportDocument.PrintToPrinter(1, 1, 1, 2)
        MsgBox("Done")
7) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
Dim rcd As ISCDReportClientDocument
        rcd = crReportDocument.ReportClientDocument
        rcd.PrintOutputController.PrintReport()
        MsgBox("Done")
8) Export to RPT file format - view this export in the CR2008 Designer - report looks as it should
9) Add report to the .NET2010 project. trying to view the repor tin the .NET2010 IDE results in .NET crashing.
- Ludek

Functioning Monitor will not display with Mac Mini

I'm trying to get an IBM E74 CRT monitor working with an early 2009 Mac Mini. I have it connected with Apple's mini-DVI to VGA adapater. The Mac "sees" the monitor since with screen sharing I can see the Display System Preference when the monitor is attached. It shows the monitor as an IBM E74 and allows what appear to be appropriate choices as far as resolution and refresh rate are concerned. I tried many combinations of resolution and refresh rate with no difference in behavior.
The monitor always acts like no signal is detected (built it message on monitor display). This monitor works fine with a B&W G3 and a late 2007 MacBook Pro. Any ideas why the Mac Mini is not driving the monitor? Have tried all combinations cycling power on the monitor, connecting / disconnecting while the Mac Mini is power up. Have had the monitor connected and powered on when booting the Mac Mini. For whatever reason the monitor does not seem to work with the Mac Mini, but works fine with other computers.
The monitor despite its' age has pretty low time on it and is quite serviceable. Are there quirks with the VGA interface that we may be running into? I would like to get this combo working together if at all possible.

I would say the VGA interface did evolve somewhat over that time period. In particular, the thing that may have changed that could be the underlying cause of the problem is sync termination impedance has trended upwards. It's not unusual to find older monitors with low impedance on sync. Some even had 75 ohm impedance, which required a line driver for sync the same as for video.
It could be the IBM monitor has fairly low termination impedance and the mini is unable to provide sufficient output on the sync lines to drive TTL levels, whereas the MBP is doing better. You could check this with a simple ohm meter with the IBM monitor turned off. Ideally, for the mini, you would want to see a high impedance reading on H and V sync, like close to 2k ohms. If it's 500 ohms or less, then the mini may not be able to drive sync properly.
On an old monitor like that, it is likely to have old fashioned components with axial leads rather than surface mount components. If you are handy with a soldering iron, you could find the offending resistors and bring the monitor up to a more modern, high impedance standard of 1.8k to 2.2k.

Flash content will not display with Player: 10.3.183.7

Hello,
I helped to design a website last year in Flash based off a template purchased from myflashxml.com. Up until the latest version of flash 10.3, all seemed to work ok. As soon as upgrading to 10.3, we see the shift up to the left on the intro and then no content displayed on the actual website (two different flash files).
I understand the issue with the shifting to the left, but I cannot seem to figure out the problem with the second flash file not loading anything, just simply a blank black screen. I have uninstalled 10.3 using the uninstaller, installed archived versions of flash player and the archived versions work properly, even on IE9. As soon as I upgrade the latest flash version, I begin to see the same issues.
I am currently running a few different computers with a few different setups. I have tried this on multiple machines with the following setups:
All are Intel processors.
Windows 7 Professional 64bit (icore5)
IE8, IE9, Firefox
Windows Vista Ultimate 64bit (core 2 duo)
IE8, Firefox, Google Chrome, Safari
Windows 7 Professional 64bit (core 2 duo)
IE8, Firefox
If anyone has any suggestions as to what to try, I am completely open. Please let me know if you need more information.

Could you send the swf's that aren't loading to [email protected]? I'll take a look and see if I can spot any issues.
Thanks,
Chirs

PC will not display with ATI videocard

Hi all,
I have a problem with my MSI 970A-G46 mainboard and my MSI 6970 lightning videocard.
When i try to upgrade my girlfriends PC from a Nvidia gtx 460 to a MSI 6970 the screen stays black when i boot with the 6970.
When i boot with the Nvidia card everything works just fine.
When i have both cards in and have the Nvidia in the first PCI-E slot and the MSI in the second slot and hook up a monitor to both cards the 6970 will display as a second monitor.
So this should tell me the 6970 is not broken and the 6970 comes from my home PC and it worked just fine there
I tried to uninstall all Nvidia drivers/files even from the registry and use driversweeper too, but no luck.
Does anyone have any bright ideas or has someone had a simular problem?
I hope somebody can help me out..
Robin
mainboard : 970A-G46
bios : 1.11
cpu : amd fx 4100
PSU : coolermaster 750 watt
GFX : MSI 6970 lightning

I could not wait till tomorrow, so i went over and i cleared the CMOS, but nothing changed. It still starts up with a black screen.
What I did notice is that when i plugged the DVI cable into the card, the display stopped saying no signal.
So it does respond to the card. Well sort of .
I will take the card home for testing in my own PC tomorrow, as that is the PC where the card came from.
If it doesnt work there i guess something happend to it..
Will post back.

Legend does not display with Line Chart

I have a query that I wrote with Bex Query Designer v3.5.11 for a BW 3.5 system. When I click Graphical Display tab in the query results, "Column Chart" shows a legend, showing which colors mean what. However, when I switch to a different type of chart, such as Line Chart, Legend does not appear. Anyone know how to make this appear? without the legend, the chart isn't very useful.

You can create a Web Template, Drag a Chart.
1) Assign a query to the chart
2) Right click over the Chart and select Edit Chart
3) Select Chart Designer.
4) Look for "Series" in the Overview Window
5) Expand the Series.
6) Activate the checkbox "Show Labels" on all the
series that you want to have values.
Regards
Armando Flores

Graphic/Image not displayed with conditional formatting in Report Designer

We are facing problems with displaying an image in a conditional formatting in the Report Designer. The image itself is in the mime repository and can be displayed in the report if no conditional formatting is used. But if it is used the image doesn't appear in the report.
Backend setup: SP 8
Frontend setup: Patch 8, hotfix 2, Revision 95
Any help is highly appreciated.
Sven

Hi,
I could not reproduce your problem in internal SP8 system. Also images in rows with conditional formatting are displayed.
Do you get any errors after the execution in the portal?
Try to use exactly the same image in both rows (drag-and-drop with CTRL key pressed).
If then your problem still occurs, open a customer message. Describe your problem in detail and write technical name of the report you used.
Regards, Karol

Popup not displayed with hierarchyViewer

Similar Messages

Maybe you are looking for