Popup window processing indicator?

I am using a javascript:popUp2(url. xsize,ysize) redirectl to another Apex Application.
When I process a query in that popup it takes about 30 seconds to produce results but since the popup window has no "Microsoft Flag" waving or other indication that the query is processing the user has no way of knowing it is actually doing anything.
Is there a way I can put some sort of "processing" indication in that popup or other App?
An hourglass cursor or a processing message ticker would be good.
Any suggestions?

You can use this example from Carl Backstrom:
http://htmldb.oracle.com/pls/otn/f?p=11933:69
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Similar Messages

  • Popup Window - Passing Parameters

    I need some help w/ popup windows and passing parameters back and forth.
    On page 7 (report page), I have:
    - TXT_P7_SALESREP displays the names of the selected sales reps, defaults to All
    - CMD_P7_PICKSALESREP opens the pop up window when clicked
    - H_P7_SALESREPIDLIST stores the list of the currently selected sales rep ids (used to generate the report)
    On page 10 (popup page), I have:
    - CBL_P10_SALESREP a check box list of all sales reps (by name)
    - H_P10_SALESREPIDLIST stores the list of currently selected sales rep ids
    - CMD_P10_OK to submit the changes and close the page
    - CMD_P10_CANCEL to close the popup window w/o saving any changes (I got this working already via the close popup window process)
    The process should be something like:1) User opens report page, 'All' is displayed in the text box, and H_P7_SALESREPIDLIST contains all the sales rep ids
    2) User clicks CMD_P7_PICKSALESREP to change list of sales reps
          2a) Popup window opens & the value of H_P10_SALESREPIDLIST is set to the value of H_P7_SALESREPIDLIST
          2b) CBL_P10_SALESREP has values checked based on the value of H_P10_SALESREPIDLIST (all by default, but a user could change sales reps multiple times)
    3) User makes their changes and hits OK
          3a) Value of H_P10_SALESREPIDLIST is updated w/ list of currently selected sales reps
          3b) Value of H_P7_SALESREPIDLIST is updated w/ the value of H_P10_SALESREPIDLIST
          3c) Popup window is closed, returning the user to the report page
          3d) TXT_P7_SALESREP is updated via the contents of H_P7_SALESREPIDLIST
    4) User runs the report which is processed/displayed based on the values of H_P7_SALESREPIDLISTI tried putting javascript:popupURL('f?p=&APP_ID.:10:&SESSION.::NO::H_P10_SALESREPIDLIST:&H_P7_SALESREPIDLIST'); in the URL Target for CMD_P7_PICKSALESREP, but it didn't work. I just dont know enough about passing parameters and APEX-specifics to set this up myself. Any help would be appreciated.
    I'd prefer to do this w/ as little javascript coding as possible, but I understand it may be necessary.

    Hello
    Change the URL for CMD_P7_PICKSALESREP to be
    javascript:showPopup();
    Add the JS below into the HTML Header of page 7 <script>
    function showPopup() {
    popupURL('f?p=&APP_ID.:10:&SESSION.::NO::H_P10_SALESREPIDLIST:' +  $v('H_P7_SALESREPIDLIST') )
    </script>Change the URL for CMD_P10_OK to be
    javascript:updateValues();
    Add the JS below into the HTML header of page 10 <script>
    function updateValeus() {
    $s('H_P10_SALESREPIDLIST', $v('CBL_P10_SALESREP') )
    window.opener.document.getElementById('H_P7_SALESREPIDLIST').value= $v('H_P10_SALESREPIDLIST')
    window.opener.document.getElementById('H_P10_SALESREPIDLIST').value= $v('H_P10_SALESREPIDLIST')
    doSubmit();
    window.close();
    </script>varad

  • How to pass field value from popup window to oninput processing of other pg

    Hi,
    I want to pass a field value from the popup window to oninput processing of main page ( from where popup window is triggered). and need to close the popup window. How to do it ?
    In the popup window's oninputprocessing, im doing some validation checks. If it passes all the validations, then only the control shd come to main page ..else it should stay in popup window only .
    Regards,
    Jothi.

    Hi Jothi,
    you can use java script to pass the value and close your popup window. use the following code.
    in your popup window:
    function passData(h1)
             window.opener.document.getElementById('var1').value = h1 ;
             window.close();
    then call this function when you finish your validations.
    in your main page layout create an input field with id as passed in the function above "var1".
    In the value attribute give it your variable as follow:
    <htmlb:inputField id      = "var1"
                              value   = "<%= var2 %>"
                              visible = "false" />
    "var2" will be assigned the value from your popup window.
    I hope this will help you..
    Regards,
    Husain

  • Need help with a popup window problem

    I have this code within my certAppB.js page :
    function AppSubmit() {
         str1 = "Submitting this form will begin the approval process.";
         str2 = "You will not be able to come back to this form to edit it again.";
         str3 = "Do you want to continue submitting this form?";
         if((confirm(str1 + "\n" + str2 + "\n" + str3))){
              document.forms[0].status.value="Submitted";
              document.forms[0].submit();
    Which produces a popup windows that says:
    Submitting this form will begin the approval process
    You will not be able to come back to this form to edit it again
    Do you want to continue submitting this form?
    OK Cancel (these are 2 buttons)
    I want to change this to say:
    Submitting this form will begin the approval process. You will not be able to change this form once submitted. You also agree that the following statement is true and correct to the best of your knowledge and belief:
    "I, [User Name], hereby certify and state on behalf of [Company Name] that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.�6314, as applicable, including authorized waivers, as they currently exist on [Date]."
    Do you want to continue submitting this form?
    OK           Cancel
    So I have to pull the users [User Name], [Company Name], and the [Date].
    On the approverView.jsp login page ( which is the first login page users see after loggin) it shows
    the users full name, so I nabbed the code from that page:
    <body>
    <jsp:include page="logo.jsp" />
    <jsp:include page="unav-navigate.jsp" />
    <table width="100%" border="0" cellspacing="0" cellpadding="5" class="info">
    <tr>
    <td width="25%" valign="top">
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="welcome">Welcome
    <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
    <bean:write name="UserContainer" property="userView.lastName" scope="session"/>
    !</span><br>
    </logic:present>
    <span class="sm">If you are not this person, please click <html:link styleClass="norm" href="/fake_name/logoff.do">here</html:link>.</span></td>
    <td width="2%"> </td>
    <td width="73%" valign="top"><jsp:include page="instruction.jsp" /></td>
    </tr>
    </table>
    and made this code out of it to pull the username,companyname:
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="User"> User
    <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
    <bean:write name="UserContainer" property="userView.lastName" scope="session"/>
    !</span><br>
    </logic:present>
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="Company">Company
         <bean:write name="UserContainer" property="userView.companyName" scope="session"/>
    !</span><br>
    </logic:present>
    This is the userView.java page that is referanced :
    * Created on Mar 28, 2003
    * To change this generated comment go to
    * Window>Preferences>Java>Code Generation>Code Template
    package org.fake.name.view;
    import java.io.Serializable;
    import java.util.List;
    import org.gama.cafs.businessobjects.TorqueDb;
    * @author chris
    public class UserView implements Serializable {
         private int userId;
         private int memberId;
         private int companyId;
         private String role;
         private String firstName;
         private String lastName;
         private String companyTitle;
         private String emailAddress;
         private String phoneNumber;
         private String companyName;
         private String address1;
         private String address2;
         private String address3;
         private String city;
         private String state;
         private String province;
         private String postalCode;
         private String countryName;
         private List productTypes = null;
         private List productTypeAcronyms = null;
         private List productTypeIds = null;
         private List tradeNameIds = null;
         private List tradeNames = null;
         private TorqueDb torqueDb = null;
         public UserView() { }
         * @return String
         public String getAddress1() {
              return address1;
         * @return String
         public String getAddress2() {
              return address2;
         * @return String
         public String getAddress3() {
              return address3;
         * @return String
         public String getCity() {
              return city;
         * @return String
         public String getCompanyName() {
              return companyName;
         * @return String
         public String getCompanyTitle() {
              return companyTitle;
         * @return String
         public String getCountryName() {
              return countryName;
         * @return String
         public String getEmailAddress() {
              return emailAddress;
         * @return String
         public String getFirstName() {
              return firstName;
         * @return String
         public String getLastName() {
              return lastName;
         * @return int
         public int getMemberId() {
              return memberId;
         * @return String
         public String getPhoneNumber() {
              return phoneNumber;
         * @return String
         public String getPostalCode() {
              return postalCode;
         * @return Set
         public List getProductTypes() {
              return productTypes;
         * @return String
         public String getProvince() {
              return province;
         * @return String
         public String getRole() {
              return role;
         * @return String
         public String getState() {
              return state;
         * @return int
         public int getUserId() {
              return userId;
         * Sets the address1.
         * @param address1 The address1 to set
         public void setAddress1(String address1) {
              this.address1 = trimString(address1);
         * Sets the address2.
         * @param address2 The address2 to set
         public void setAddress2(String address2) {
              this.address2 = trimString(address2);
         * Sets the address3.
         * @param address3 The address3 to set
         public void setAddress3(String address3) {
              this.address3 = trimString(address3);
         * Sets the city.
         * @param city The city to set
         public void setCity(String city) {
              this.city = trimString(city);
         * Sets the companyName.
         * @param companyName The companyName to set
         public void setCompanyName(String companyName) {
              this.companyName = trimString(companyName);
         * Sets the companyTitle.
         * @param companyTitle The companyTitle to set
         public void setCompanyTitle(String companyTitle) {
              this.companyTitle = trimString(companyTitle);
         * Sets the countryName.
         * @param countryName The countryName to set
         public void setCountryName(String countryName) {
              this.countryName = trimString(countryName);
         * Sets the emailAddress.
         * @param emailAddress The emailAddress to set
         public void setEmailAddress(String emailAddress) {
              this.emailAddress = trimString(emailAddress);
         * Sets the firstName.
         * @param firstName The firstName to set
         public void setFirstName(String firstName) {
              this.firstName = trimString(firstName);
         * Sets the lastName.
         * @param lastName The lastName to set
         public void setLastName(String lastName) {
              this.lastName = trimString(lastName);
         * Sets the memberId.
         * @param memberId The memberId to set
         public void setMemberId(int memberId) {
              this.memberId = memberId;
         * Sets the phoneNumber.
         * @param phoneNumber The phoneNumber to set
         public void setPhoneNumber(String phoneNumber) {
              this.phoneNumber = trimString(phoneNumber);
         * Sets the postalCode.
         * @param postalCode The postalCode to set
         public void setPostalCode(String postalCode) {
              this.postalCode = trimString(postalCode);
         * Sets the productTypes.
         * @param productTypes The productTypes to set
         public void setProductTypes(List productTypes) {
              this.productTypes = productTypes;
         * Sets the province.
         * @param province The province to set
         public void setProvince(String province) {
              this.province = trimString(province);
         * Sets the role.
         * @param role The role to set
         public void setRole(String role) {
              this.role = trimString(role);
         * Sets the state.
         * @param state The state to set
         public void setState(String state) {
              this.state = trimString(state);
         * Sets the userId.
         * @param userId The userId to set
         public void setUserId(int userId) {
              this.userId = userId;
         * @return List
         public List getProductTypeAcronyms() {
              return productTypeAcronyms;
         * Sets the productTypeIds.
         * @param productTypeIds The productTypeIds to set
         public void setProductTypeAcronyms(List productTypeAcronyms) {
              this.productTypeAcronyms = productTypeAcronyms;
         public List getProductTypeIds() {
              return productTypeIds;
         public void setProductTypeIds(List productTypeIds) {
              this.productTypeIds = productTypeIds;
         private String trimString(String str) {
              String tmp = null;
              if (str != null)
                   tmp = str.trim();
              else
                   tmp = str;
              return tmp;
         public List getTradeNameIds() {
              return tradeNameIds;
         public List getTradeNames() {
              return tradeNames;
         public void setTradeNameIds(List list) {
              tradeNameIds = list;
         public void setTradeNames(List list) {
              tradeNames = list;
         public TorqueDb getTorqueDb() {
              return torqueDb;
         public void setTorqueDb(TorqueDb db) {
              torqueDb = db;
         public int getCompanyId() {
              return companyId;
         public void setCompanyId(int i) {
              companyId = i;
    Question:
    How do I insert the code I assembled:
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="User"> User
    <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
    <bean:write name="UserContainer" property="userView.lastName" scope="session"/>
    !</span><br>
    </logic:present>
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="Company">Company
         <bean:write name="UserContainer" property="userView.companyName" scope="session"/>
    !</span><br>
    </logic:present>
    INTO the function:
    function AppSubmit() {
         str1 = "Submitting this form will begin the approval process.";
         str2 = "You will not be able to come back to this form to edit it again.";
         str3 = "Do you want to continue submitting this form?";
         if((confirm(str1 + "\n" + str2 + "\n" + str3))){
              document.forms[0].status.value="Submitted";
              document.forms[0].submit();
    So that the popup window will show the [username], [CompanyName], [Date]. I can�t find any doc�s on how to insert logic into a function with str�s.
    Any help would be very much appreciated. Thanks in advance.
    Applications used by me: Sun solaris 8 server, Tomcat 4.1.24, pulling from postgresql 7.3, and I edit in Eclipse 2.11.

    These two tags:
    <logic:present name="UserContainer" property="userView" scope="session">
    </logic:present>
    surround things you only want to happen if there is a userView object present.
    This tag:
    <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
    is replaced with the value of userView.getFirstName().
    So:
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="User"> User
    <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
    <bean:write name="UserContainer" property="userView.lastName" scope="session"/>
    !</span><br>
    </logic:present>
    becomes:
    User Jim Steinberger !
    if the userView object is present and firstName == Jim and lastName == Steinberger.
    To insert those values into your JavaScript function:
    <logic:present name="UserContainer" property="userView" scope="session">
    function AppSubmit() {
    str1 = "Submitting this form will begin the approval process.";
    str2 = "You will not be able to come back to this form to edit it again.";
    str3 = "You also agree that the following statement is true and correct to the best of your knowledge and belief:";
    str4 = "";
    str5 = "I, <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
    <bean:write name="UserContainer" property="userView.lastName" scope="session"/>, hereby certify and state on behalf of <bean:write name="UserContainer" property="userView.companyName" scope="session"/> that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.?6314, as applicable, including authorized waivers, as they currently exist on " + new Date().getDate() + "/" + new Date().getMonth() + "/" + new Date().getFullYear() + ".";
    str6 = "Do you want to continue submitting this form?";
    if((confirm( str1 + "\n" + str2 + "\n" + str3 + "\n\n\n" + str4 + "\n" + str5 + "\n" + str6 ))){
    document.forms[0].status.value="Submitted";
    document.forms[0].submit();
    </logic:present>
    Should become:
    function AppSubmit() {
    str1 = "Submitting this form will begin the approval process.";
    str2 = "You will not be able to come back to this form to edit it again.";
    str3 = "You also agree that the following statement is true and correct to the best of your knowledge and belief:";
    str4 = "I, Jim Steinberger, hereby certify and state on behalf of Dynamic Edge, Inc. that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.?6314, as applicable, including authorized waivers, as they currently exist on " + new Date().getDate() + "/" + new Date().getMonth() + "/" + new Date().getFullYear() + ".";
    str6 = "Do you want to continue submitting this form?";
    if((confirm( str1 + "\n" + str2 + "\n" + str3 + "\n\n" + str4 + "\n" + str5 + "\n\n" + str6 ))){
    document.forms[0].status.value="Submitted";
    document.forms[0].submit();
    after being processed by Tomcat and Struts. (Note: the function will not appear if userView is missing)
    By the way, you might be missing the closing bracket to function AppSubmit() { which might throw a JavaScript error. Just FYI :)
    Good luck!
    Jim Steinberger
    [email protected]

  • Popup windows are small and cannot be resized in Firefox v31.0. v30.0 and earlier does not have this problem. Example: Hostgator's SmarterMail. XP, 7, 8.1.

    My webmail interface is SmarterMail from Plesk as supplied by Hostgator. When Firefox updated to v31.0, I lost the ability to send mail because the popup windows for "New", "Reply", "Reply All", and "Forward" are too small to enter information and cannot be resized or maximized.
    This problem does not occur with older versions of Firefox (tested 16.0.2, 21.0, 24.0, and 30.0) or with Chrome or Internet Explorer. While I am writing to you from a Windows XP Pro SP3 system, I have also verified the problem under Windows 7 Pro (x64) and Windows 8.1 (x64).
    It's not profile settings, malware, or add-ons. I've tried Firefox Safemode and I've tried "Reset Firefox".
    For the time being the workaround is to disable Firefox updates and downgrade everybody with v31 to v30. Please fix this ASAP. You have lots of people reporting it.

    As a temporary workaround, you can block website scripts from resizing windows. It's a bit of a sledgehammer, but another user who has this problem indicated that it does stop the SmarterMail script from rolling up the window.
    Here's how:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''dom''' and pause while the list is filtered
    (3) Double-click the '''dom.disable_window_move_resize''' preference to switch it from false to true.

  • Error when calling a popup window in the initial screen of an application

    Hi,
        I am calling a popup window in the Initial screen to select the variant list.
    I am getting an error reference to Null Object reference.
    Here is the Error.
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
    Exception              CX_SY_REF_IS_INITIAL
    Date and Time          15.06.2007 10:00:16
    Short text
    Access via 'NULL' object reference not possible.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_WDR_MESSAGE_AREA===========CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
    procedure "SUPPLY_VIEW_DATA" "(METHOD)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
    "CL_WDR_MESSAGE_AREA===========CP" or "CL_WDR_MESSAGE_AREA===========CM00Q"
    "SUPPLY_VIEW_DATA"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "SUPPLY_VIEW_DATA" "(METHOD)", or its possible occurrence must be declared in
    the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
    Looking for Ur valuable suggestions.
    Cheers,
    Sam

    Hi Sam,
    The correct code for creating a popup window will be:
      data lo_window_manager type ref to if_wd_window_manager.
      data lo_api_component  type ref to if_wd_component.
      data lo_window         type ref to if_wd_window.
      lo_api_component  = wd_comp_controller->wd_get_api( ).
      lo_window_manager = lo_api_component->get_window_manager( ).
      lo_window         = lo_window_manager->create_window(
                         window_name            = 'WINDOW_NAME'
    *                    title                  =
    *                    close_in_any_case      = abap_true
                         message_display_mode   = if_wd_window=>co_msg_display_mode_selected
    *                    close_button           = abap_true
                         button_kind            = if_wd_window=>co_buttons_okcancel
                         message_type           = if_wd_window=>co_msg_type_none
                         default_button         = if_wd_window=>co_button_ok
      lo_window->open( ).
    Hope this helps.
    Regards,
    Ram

  • How do I get a popup window to stay open with a validation failure?

    Environment:
    APEX 3.1.1.00.09 on AIX 5.3
    Oracle 10.2.0.2 EE on AIX 5.3
    Sample app on apex.oracle.com:
    Workspace: galway
    User: gwicke
    Pass: gwicke
    Steps:
    1- run Page 3
    2- select J & B Marketing from drop down
    3- select only contract from drop down
    4- click on Edit Existing Contract
    5- click on Add New Builder
    6- Enter the same builder from calling page: Builder Name: Alvarez Construction City: Baton Rouge State: LA
    7- click Add Builder
    The original version of this page would add the new builder to the database, pass the information back to the calling page and close the popup window. Cool.
    I have added a validation on the popup page (Page 4) to check for an existing builder with the same name and city.
    What I'd like to have happen is the popup window stay open so the user can see the error message with the instructions for them to click on the CANCEL button and then select the builder from the drop down list. When they click the CANCEL button I need to have the window close.
    What is happening is the window is closing as soon as the Add Builder button is clicked.
    This is because there is a region called 'scripts' that contains javascript to submit the page and close the window and the condition on the region is only that the Builder Name is not null. So, the good news is that I understand why the window is closing but I'm not sure the best way to keep it open when the error condition happens.
    Thanks very much for your help. I'm sure you recall everything about this app you helped me with many months ago. NOT!! :-)
    -gary

    Gary, I think I've got it working the way you want.
    1. I added a conditional branch to page 4 which fires on the not exists builder condition condition.
    2. I disabled the reset page process. With that running, the conditional branch to page 4 woul always fire because the builder name and city were always cleared by the time the branch executed.
    3. I noticed that the new builder did not show up in your select list until I refreshed page 2. I haven't had a chance to look at that. Maybe a branch back to page 2 from page 4 after successfully loading a new builder will take care of that.
    Bob

  • Deadlock between "Save as" dialog box and another popup window in Firefox

    I have only seen this problem with recent versions of Firefox on Mac OS X, and I have run into it several times in the last few months (I am using Firefox 9), where Firefox seems to get into a dead-lock, and I can't find anyway round this except killing and restarting Firefox.
    The dead-lock happens when I am in the "Save as" dialog box -- i.e. the popup when I try to save something. If I get a pop-up window warning me that the script on some webpage is unresponsive, this leads to a dead-lock. The reason is this popup expects a response from me -- to stop or let the script continue, but it is unable to accept my response, I assume because the "Save As" dialog box has the focus, but I am unable to continue with the "Save As" dialog (I simply get a beep if I press the save or cancel buttons), presumably because of the "unresponsive" popup is expecting my response.
    I don't know if the "unresponsive script" popup happens because I am taking too long with the "Save As" dialog, or if it is prompted by the script from another page (I have many tabs opened)
    Is there anyway to get around this without killing the Firefox process? Also, can this problem be fixed so that the dead-lock does not occur?

    As I said, the problem is not because Firefox is hanging, or because I cannot save my files. It is happening because the "unrespnsive script" popup is allowed to occur while I am in the "Save As" dialog -- i.e. I have chosen to save something, e.g. a web page, and this prompt the "Save As" dialog, i.e. where I specify the file name and where to save to -- this is working fine.
    However, when you are in the "Save As" dialog, the "Save As" window is the only window of Firefox that you can interact with. However, if the "unresponsive script" popup window happens to pop-up when you are inside the "Save As" dialog (which does not occur very often, and I have not encounter it except on recent versions of Firefox o the Mac; I have used Firefox on Windows and Linux for many years), then you get into this dead-lock, because you cannot answer the "unresponsive script" pop-up (i.e to continue or terminate the script), as you cannot interact with the new pop-up window, but at the same time, you cannot continue with the "Save As" dialog -- you can interact with the "Save As" window (i.e. press buttons etc.), but the actions are ignored.
    To be clear, what I suspect I am seeing is a bug in the User interface code for the Mac version of Firefox.
    I have noticed yesterday that I got an "unresponsive script" pop-up on the Windows version of Firefox immediately after I have finished my "Save As" dialog. I have no way of being certain (unless I look at the code), but my guess is that the "unresponsive script" pop-up was delayed until after I finished the "Save As" dialog on the Windows version, i.e. option 3 in my previous post, but this does not seem to happen on the Mac version.

  • Refresh only page item while submitting data from the popup window

    Hi All,
    I'm pretty new to Apex .....
    I have a form with text items as first few entries and then a radio button list and few text items again. On selecting certain radio button I have a popup window which acts as an interface for the next text item in the calling page. The purpose of having the popup window is that the text item following the radio button takes the input with certain character delimiters along with the data. Instead of using delimiters while entering the data I want a meaningful data to be keyed in the popup window and all the string operation to be done as a background process. I have been successful this far. I'm using the below javascript on click of the submit button.
    javascript:doSubmit();
    window.opener.doSubmit('REFRESH');
    window.close();
    On doing this I'm losing the values submitted for the items prior to the radio button(including radio button). Please note, I have a dynamic action set on page load to reset the values. Is it possible to refresh just the page item from the popup window.
    Also, I tried excluding the window.opener.doSubmit('REFRESH'); from the above javascript. It sets the item with the expected value (viewed it in the session items, however I would like to view the concatenated string on my calling page) but following this there is an insert operation which uses all the necessary items in the form. All values except the value returned from the popup window is populated into the table. Am I missing something.
    Any help in this regard is appreciated.
    Thank you!!!
    Regards,
    Ganesh

    Value set using Javascript is only in your browser page but is not yet available in the session. This is why the report doesn't return the expected output.
    Before refreshing the report you would need to set the session state of this item.
    You can set it after you assign the item a new value or before the report is refreshed
    For Interactive Reports, this is available built in
    you can go to Report Attributes >Advanced Attributes -> Page Items to Submit and specify P2_X1 for the field(and any other page item that the report is dependent on)
    For standard reports, you can create a Dynamic Action that is triggered "before refresh" of the report's region, and choose PLSQL as the action types, give a dummy BEGIN NULL END; for the code and specify this item name in the page item to submit field so that it sets the items's value in session.

  • How to open URL as a popup window through BRANCH in APEX reports

    Hi
    I am using APEX 4.0
    I have a branch with a target type of URL. The branch is triggered by pressing a button. There is also a plsql process on the same button which fires at the process point of "On Submit-After Computations and Validations". I want to open the branch URL as the popup Window. I tried doing it with javascript, but then the plsql process doesn't execute. Any pointers will be helpful.
    Thanks
    Hina

    You can use the apex.submit javascript function. This function allows to store some item value from session scope to database scope. So that a page process picks the correct item value. Not sure if it works with computations thou.
    See the docs: JavaScript APIs
    Example
    Submits the current page with a REQUEST value of 'DELETE'.
    apex.submit({ request:"DELETE", set:{"P1_DEPTNO":10, "P1_EMPNO":5433});
    Then add a branch with type "branch to function returning URL" This page branch can be made conditional on the same request as the page process.
    The returned url would be either include the javascript popup or window.open function or simply be the url. Important thing here would be to use a function that reads the url item  from database state, since at that moment the computation or page process will have set the item on database level, but it is not directly available on page level.
    meaning ":p2_item" or v('P2_ITEM') should work. &P2_ITEM. in the url will probably not work.

  • Resizing popup window

    hello ,
    i have a problem with resizing a popup window from fullscreen to centered and smaller
    now is there anyone who can look at my js and html/css ?

    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
        "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" lang="en">
    <head>
        <link rel="stylesheet" title="Standard" href="styles.css" type="text/css" media="screen" />
    <script language="javascript" type="text/javascript" >
    function popupwindow(url, title, w, h)
        var left = (screen.width/2)-(w/2);
        var top = (screen.height/2)-(h/2);
        var new_left = window.screenX + (((window.outerWidth/2) - (w/2)));
        var new_top = window.screenY + (((window.outerHeight/2) - (w/2)));
        return window.open(url, title, 'width='+w+', height='+h+', top='+new_top+', left='+new_left+',toolbar=no, location=no, directories=no, status=no, menubar=no, scrollbars=no, copyhistory=no');
    popupwindow('index.html','','500','768');
    </script>
        <script language="JavaScript" type="text/javascript" src="contentflow.js"></script><script tyle="text/javascript">
    var cf = new ContentFlow('contentFlow', {reflectionColor: "#000000"});
    function MM_openBrWindow(theURL,winName,features) { //v2.0
      window.open(theURL,winName,features);
        </script>
    </head>
    <body>
        <h1 id="title"><img src="title.png"/></h1>
        <h3 style="text-align: center; margin: 10px 0 30px 0; text-decoration: none;">version 1.0.2</h3>
        <ul id="menu">
            <li><a href="index.html">start</a></li>
            <li><a href="docu.html">documentation</a></li>
            <li><a href="changelog.html">changelog</a></li>
            <li><a href="license.html">license</a></li>
            <li><a href="mailto:[email protected]">contact</a></li>
        </ul>
        <div class="maincontent">
            <p>
            ContentFlow is a flexible flow written in javascript, which can handle any kind of content.
            It's distributed under the <a href="licens.html">MIT License</a>.
            </p>
            <p>
            With ContentFlow it is now possible to have any number of flows within one web page.
            Each separately configurable, satisfying different visual needs.
            </p>
            <p>
            It's easy to implement and to extend.
            You are free to define your own methods for displaying content and interacting with it.
            You can control all aspects of the flow without loosing the ease of use.
            </p>
            <p>
            ContentFlow can handle different kinds of control, like keyboard and mouse, and can be used with and without a reflection.
            For a complete list of features and compatibilities take a look at the <a href="http://www.jacksasylum.eu/ContentFlow/features.html">feature list</a>.
            </p>
        <!-- ===== FLOW ===== -->
        <div id="contentFlow" class="ContentFlow">
            <!-- should be place before flow so that contained images will be loaded first -->
            <div class="loadIndicator"><div class="indicator"></div></div>
            <div class="flow">
                <div class="item">
                    <img class="content" src="pics/pic1.png"/>
                    <div class="caption">pic1: some stripes</div>
                </div>
                <div class="item">
                    <img class="content" src="pics/pic2.png"/>
                    <div class="caption">pic2: some stripes</div>
                </div>
                <div class="item">
                    <img class="content" src="pics/pic1.png"/>
                    <div class="caption">pic1: some stripes</div>
                </div>
                <div class="item">
                    <img class="content" src="pics/pic0.png"/>
                    <div class="caption">pic0: some stripes</div>
                </div>
                <div class="item">
                    <img class="content" src="pics/pic1.png"/>
                    <div class="caption">pic1: some stripes</div>
                </div>
                <div class="item">
                    <img class="content" src="pics/pic2.png"/>
                    <div class="caption">pic2: some stripes</div>
                </div>
                <div class="item">
                    <img class="content" src="pics/pic1.png"/>
                    <div class="caption">pic1: some stripes</div>
                </div>
                <div class="item">
                    <img class="content" src="pics/pic0.png"/>
                    <div class="caption">pic0: some stripes</div>
                </div>
                <div class="item">
                    <img class="content" src="pics/pic1.png"/>
                    <div class="caption">pic1: some stripes</div>
                </div>
                <div class="item">
                    <img class="content" src="pics/pic2.png"/>
                    <div class="caption">pic2: some stripes</div>
                </div>
                <div class="item">
                    <img class="content" src="pics/pic1.png"/>
                    <div class="caption">pic1: some stripes</div>
                </div>
            </div>
            <div class="globalCaption"></div>
            <div class="scrollbar">
                <div class="slider"><div class="position"></div></div>
            </div>
        </div>
    </body>
    </html>

  • Modal popup window refresh the parent (calling) window/view

    I have a modal popup window that is adding detail records.  When this window is closed via the Hide method in my controller I would like to refresh the parent (calling) window/view.
    What is the best way to do this?
    Regards,
    Diane

    Here's my process.....
    2-windows & 3 views
    Window 1 - Selection View and Detail View
    Window 2 - Add View (used as a modal popup window called by a button click on the detail view)
    Selection View has all the options for obtaining a list of data for the detail view.  The detail view has an Add button.  Component controller has the hide method and access to the other components that do the update/query methods. On the detail view the user can click Add and a popup modal window shows.  User enters data and clicks either the add or cancel button.  The Detail view needs to refresh to show the additional data that has been added by the modal window.  There are calcuated values in the detail view from a supply function.  This function is not running and the values are not changed.
    What should be put in the hide method that will cause the detail view to obtain new data and supply the calculated values?  If I was using the Add view as part of the same window as the detail/selection views I'd just put in a navigation link between the detail and add views and fire the plug.  I like the idea of the popup window so I'd like to get this to work.
    I put the wdContext.initialize() in the hide method - which yes - caused the detail view to run - however the context lost all the key values so I received a data not found.  I then tried to initialize those nodes that did not contain the key values but the detail view did not display new values.
    Thanks for any ideas.....Diane
    Edited by: Diane Fuller on Jan 8, 2009 6:48 AM

  • I downloaded and installed Photoshop Elements & Premiere Elements.  I then launched Photoshop Elements Organizer and imported approx. 28,000 photos (including some videos).  A window opened indicating that many of the photos had tags, and asking if I want

    I downloaded and installed Photoshop Elements & Premiere Elements.  I then launched Photoshop Elements Organizer and imported approx. 28,000 photos (including some videos).  A window opened indicating that many of the photos had tags, and asking if I wanted to add the tags.  I said yes, and the process began.  When it reached 60% a window opened indicating that "Elements 13 Organizer has stopped working", with the only option being to "Close program."
    I've since tried to open organizer several times, but it goes immediately to "Elements 13 Organizer has stopped working".  I was able to open Editor, and tried opening Organizer from Editor, but encountered the same problem.
    FYI, I have an open case (#0214505556), but have not received the help I need.

    This issue is with respect to Elements 13.

  • More than 3 buttons in a Popup Window

    Hi,
    is it possible to provide more than 3 buttons in a popup window?
    In the Interface IF_WD_WINDOW I can only find button types like co_buttons_yesnocancel which represents 3 buttons, but it would be nice to have 4 buttons.
    Is this possible at all?
    Regards, Steffen

    You have a few choices.  First why not move the processing for these buttons into the view of the popup.  If your logic is structured into the component or custom controller, then you should be able to trigger those calls just as easily from the view popup. 
    The other option is to create a separate component for the popup - with the custom buttoms. You can then create your actions as interface actions and register event handlers from your calling component - basically just normal cross-component eventing.

  • Popup window problem in tomcat

    I have this code within my certAppB.js page :
    function AppSubmit() {
         str1 = "Submitting this form will begin the approval process.";
         str2 = "You will not be able to come back to this form to edit it again.";
         str3 = "Do you want to continue submitting this form?";
         if((confirm(str1 + "\n" + str2 + "\n" + str3))){
              document.forms[0].status.value="Submitted";
              document.forms[0].submit();
    Which produces a popup windows that says:
    Submitting this form will begin the approval process
    You will not be able to come back to this form to edit it again
    Do you want to continue submitting this form?
    OK Cancel (these are 2 buttons)
    I want to change this to say:
    Submitting this form will begin the approval process. You will not be able to change this form once submitted. You also agree that the following statement is true and correct to the best of your knowledge and belief:
    "I, [User Name], hereby certify and state on behalf of [Company Name] that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.�6314, as applicable, including authorized waivers, as they currently exist on [Date]."
    Do you want to continue submitting this form?
    OK           Cancel
    So I have to pull the users [User Name], [Company Name], and the [Date].
    On the approverView.jsp login page ( which is the first login page users see after loggin) it shows
    the users full name, so I nabbed the code from that page:
    <body>
    <jsp:include page="logo.jsp" />
    <jsp:include page="unav-navigate.jsp" />
    <table width="100%" border="0" cellspacing="0" cellpadding="5" class="info">
    <tr>
    <td width="25%" valign="top">
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="welcome">Welcome
    <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
    <bean:write name="UserContainer" property="userView.lastName" scope="session"/>
    !</span><br>
    </logic:present>
    <span class="sm">If you are not this person, please click <html:link styleClass="norm" href="/fake_name/logoff.do">here</html:link>.</span></td>
    <td width="2%"> </td>
    <td width="73%" valign="top"><jsp:include page="instruction.jsp" /></td>
    </tr>
    </table>
    and made this code out of it to pull the username,companyname:
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="User"> User
    <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
    <bean:write name="UserContainer" property="userView.lastName" scope="session"/>
    !</span><br>
    </logic:present>
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="Company">Company
         <bean:write name="UserContainer" property="userView.companyName" scope="session"/>
    !</span><br>
    </logic:present>
    This is the userView.java page that is referanced :
    * Created on Mar 28, 2003
    * To change this generated comment go to
    * Window>Preferences>Java>Code Generation>Code Template
    package org.fake.name.view;
    import java.io.Serializable;
    import java.util.List;
    import org.gama.cafs.businessobjects.TorqueDb;
    * @author chris
    public class UserView implements Serializable {
         private int userId;
         private int memberId;
         private int companyId;
         private String role;
         private String firstName;
         private String lastName;
         private String companyTitle;
         private String emailAddress;
         private String phoneNumber;
         private String companyName;
         private String address1;
         private String address2;
         private String address3;
         private String city;
         private String state;
         private String province;
         private String postalCode;
         private String countryName;
         private List productTypes = null;
         private List productTypeAcronyms = null;
         private List productTypeIds = null;
         private List tradeNameIds = null;
         private List tradeNames = null;
         private TorqueDb torqueDb = null;
         public UserView() { }
         * @return String
         public String getAddress1() {
              return address1;
         * @return String
         public String getAddress2() {
              return address2;
         * @return String
         public String getAddress3() {
              return address3;
         * @return String
         public String getCity() {
              return city;
         * @return String
         public String getCompanyName() {
              return companyName;
         * @return String
         public String getCompanyTitle() {
              return companyTitle;
         * @return String
         public String getCountryName() {
              return countryName;
         * @return String
         public String getEmailAddress() {
              return emailAddress;
         * @return String
         public String getFirstName() {
              return firstName;
         * @return String
         public String getLastName() {
              return lastName;
         * @return int
         public int getMemberId() {
              return memberId;
         * @return String
         public String getPhoneNumber() {
              return phoneNumber;
         * @return String
         public String getPostalCode() {
              return postalCode;
         * @return Set
         public List getProductTypes() {
              return productTypes;
         * @return String
         public String getProvince() {
              return province;
         * @return String
         public String getRole() {
              return role;
         * @return String
         public String getState() {
              return state;
         * @return int
         public int getUserId() {
              return userId;
         * Sets the address1.
         * @param address1 The address1 to set
         public void setAddress1(String address1) {
              this.address1 = trimString(address1);
         * Sets the address2.
         * @param address2 The address2 to set
         public void setAddress2(String address2) {
              this.address2 = trimString(address2);
         * Sets the address3.
         * @param address3 The address3 to set
         public void setAddress3(String address3) {
              this.address3 = trimString(address3);
         * Sets the city.
         * @param city The city to set
         public void setCity(String city) {
              this.city = trimString(city);
         * Sets the companyName.
         * @param companyName The companyName to set
         public void setCompanyName(String companyName) {
              this.companyName = trimString(companyName);
         * Sets the companyTitle.
         * @param companyTitle The companyTitle to set
         public void setCompanyTitle(String companyTitle) {
              this.companyTitle = trimString(companyTitle);
         * Sets the countryName.
         * @param countryName The countryName to set
         public void setCountryName(String countryName) {
              this.countryName = trimString(countryName);
         * Sets the emailAddress.
         * @param emailAddress The emailAddress to set
         public void setEmailAddress(String emailAddress) {
              this.emailAddress = trimString(emailAddress);
         * Sets the firstName.
         * @param firstName The firstName to set
         public void setFirstName(String firstName) {
              this.firstName = trimString(firstName);
         * Sets the lastName.
         * @param lastName The lastName to set
         public void setLastName(String lastName) {
              this.lastName = trimString(lastName);
         * Sets the memberId.
         * @param memberId The memberId to set
         public void setMemberId(int memberId) {
              this.memberId = memberId;
         * Sets the phoneNumber.
         * @param phoneNumber The phoneNumber to set
         public void setPhoneNumber(String phoneNumber) {
              this.phoneNumber = trimString(phoneNumber);
         * Sets the postalCode.
         * @param postalCode The postalCode to set
         public void setPostalCode(String postalCode) {
              this.postalCode = trimString(postalCode);
         * Sets the productTypes.
         * @param productTypes The productTypes to set
         public void setProductTypes(List productTypes) {
              this.productTypes = productTypes;
         * Sets the province.
         * @param province The province to set
         public void setProvince(String province) {
              this.province = trimString(province);
         * Sets the role.
         * @param role The role to set
         public void setRole(String role) {
              this.role = trimString(role);
         * Sets the state.
         * @param state The state to set
         public void setState(String state) {
              this.state = trimString(state);
         * Sets the userId.
         * @param userId The userId to set
         public void setUserId(int userId) {
              this.userId = userId;
         * @return List
         public List getProductTypeAcronyms() {
              return productTypeAcronyms;
         * Sets the productTypeIds.
         * @param productTypeIds The productTypeIds to set
         public void setProductTypeAcronyms(List productTypeAcronyms) {
              this.productTypeAcronyms = productTypeAcronyms;
         public List getProductTypeIds() {
              return productTypeIds;
         public void setProductTypeIds(List productTypeIds) {
              this.productTypeIds = productTypeIds;
         private String trimString(String str) {
              String tmp = null;
              if (str != null)
                   tmp = str.trim();
              else
                   tmp = str;
              return tmp;
         public List getTradeNameIds() {
              return tradeNameIds;
         public List getTradeNames() {
              return tradeNames;
         public void setTradeNameIds(List list) {
              tradeNameIds = list;
         public void setTradeNames(List list) {
              tradeNames = list;
         public TorqueDb getTorqueDb() {
              return torqueDb;
         public void setTorqueDb(TorqueDb db) {
              torqueDb = db;
         public int getCompanyId() {
              return companyId;
         public void setCompanyId(int i) {
              companyId = i;
    Question:
    How do I insert the code I assembled:
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="User"> User
    <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
    <bean:write name="UserContainer" property="userView.lastName" scope="session"/>
    !</span><br>
    </logic:present>
    <logic:present name="UserContainer" property="userView" scope="session">
    <span class="Company">Company
         <bean:write name="UserContainer" property="userView.companyName" scope="session"/>
    !</span><br>
    </logic:present>
    INTO the function:
    function AppSubmit() {
         str1 = "Submitting this form will begin the approval process.";
         str2 = "You will not be able to come back to this form to edit it again.";
         str3 = "Do you want to continue submitting this form?";
         if((confirm(str1 + "\n" + str2 + "\n" + str3))){
              document.forms[0].status.value="Submitted";
              document.forms[0].submit();
    So that the popup window will show the [username], [CompanyName], [Date]. I can�t find any doc�s on how to insert logic into a function with str�s.
    Any help would be very much appreciated. Thanks in advance.
    Applications used by me: Sun solaris 8 server, Tomcat 4.1.24, pulling from postgresql 7.3, and I edit in Eclipse 2.11.

    if the user info is in a bean, you can write it out:
    function AppSubmit() {
    str1 = "welcome, <bean:write name="UserContainer" property="userView.firstName" scope="session"/> ...";
    The javascript code will is interpreted only on the browser, it has no idea that it was written with fixed strings or inserted from the bean.
    If the user info is in form fields, you can do something like this:
    function AppSubmit() {
    str1 = "welcome, " + document.forms['myform'].username.value + " ...";
    ...

Maybe you are looking for

  • Windows server 2008 R2 Standard Edition

    Dear Team, I am having server 2008 R2 standard edition. The Server is getting shut down and showing error in event viewer "Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first" Please reply on this asap to res

  • BIP Report is not opening in Siebel

    Hi All, We're having an issue with opening the BIP report except for the html format. After selecting i.e. the format pdf and click 'Submit' it takes a few seconds then the pop-up window appears where we can 'Open' or 'Save' the file. If I click Open

  • Adobe Photoshop CS5 Subscription Failure

    Hi there. I'm trying to install Adobe Photoshop CS5 on my laptop and every time, after installing the product and entering the serial number, the process fails and tells me 'We are unable to start your subscription for Adobe Photoshop CS5 Subscriptio

  • HELP! Unable to run root.sh

    I have just started to install the Oracle 8.0.5 for Linux and have run into a little problem (I am using RedHat 5.1). I setup the proper oracle user and group and set up the proper env variables in the .profile of the oralce user I setup like so: LD_

  • Install LR3 with LionOSX- not importing CR2 files

    When LR3 is installed, it will not import my CR2 files.  tried an un-install and still no results.  when i install LR3.5 on laptop (without Lion) everything works fine.  what is going on?