Port communication and installation setup
Hi,
We are going to install MBAM 2.5 in our environment in before that I do have 2 queries which I would like to clarify -
1 - What the ports require for MBAM communication.
2 - From where I can download the MBAM 2.5 setup. For set up should be have the license for MDOP?
Please advice.
Regards
Govind
Hi,
2 - In order to download it on your MVLS portal you must be eligible to the SA with MDOP
1 - the following common port are :
1433 between the webservices and the SQL server
80/443 for the reporting server role
80/443 between the endpoints and the webservices server role
the sccm agent common port
Regards,
Follow me on Twitter http://www.twitter.com/liontux | My Blog (French/English) :
http://security.sakuranohana.fr/
Similar Messages
-
ASA 5505 unable to access ASDM ( just needs some ports ope and FWDing setup)
I was able to access the ASDM launcher in the browser yesterday via https://192.168.111.1/admin and I was stuck there as the browser version says that my ASA image does not work with my ASDM version... So i tried some trouble shooting and think that i may have changed the image to an image that does not exist. (I'm not sure where it is that I would actually place that image either) Now i am unable to access through the browser at all.
Anyways, I am ok with SSH/CLI and have been using my firewall in this manner. I am walking into this companies current configuration and simply need to do the following:
I need to OPEN ports 9000, 85, 40085, 49005 so that my mobile device can pull my security cameras in the office
I need to set port forwarding so that any connections that hit outside-in ip address 205.214.36.53:1610 >>> http://192.168.111.30:1610/AndroidWS/ for our new mobile CRM.
I have been through some of your related discussions and am falling short somewhere. Please help
here is my "show run" and my "dir"
ciscoasa(config)# show run
: Saved
ASA Version 9.0(2)
hostname ciscoasa
domain-name scec.local
enable password ol40hHpZTtZQFXMJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ol40hHpZTtZQFXMJ encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif INSIDE
security-level 100
ip address 192.168.111.1 255.255.255.0
interface Vlan2
nameif OUTSIDE
security-level 0
ip address 205.214.236.50 255.255.255.240
boot system disk0:/asa902-k8.bin
boot system disk0:/asa825-k8.bin
boot system disk0:/asa831-k8.bin
ftp mode passive
dns domain-lookup INSIDE
dns domain-lookup OUTSIDE
dns server-group DefaultDNS
name-server 192.168.111.50
name-server 8.8.8.8
domain-name scec.local
object network LAN
subnet 192.168.111.0 255.255.255.0
object network SERVER1
host 192.168.111.50
object network SERVER1_PUBLIC
host 205.214.236.51
object network SERVER2
host 192.168.111.20
object network SERVER2_PUBLIC
host 205.214.236.52
object network SERVER3
host 192.168.111.30
object network SERVER3_PUBLIC
host 205.214.236.53
object network SERVER4
host 192.168.111.40
object network SERVER4_PUBLIC
host 205.214.236.54
object network SERVER5
host 192.168.111.10
object network SERVER5_PUBLIC
host 205.214.236.55
object-group service SERVER1_PORTS tcp
port-object eq www
port-object eq https
port-object eq smtp
port-object eq pop3
port-object eq imap4
port-object eq 3389
object-group service SERVER2_PORTS tcp
port-object eq 3389
object-group service SERVER3_PORTS tcp
port-object eq 3389
object-group service SERVER4_PORTS tcp
port-object eq 3389
object-group service SERVER5_PORTS tcp
port-object eq 3389
port-object eq www
port-object eq https
access-list OUTSIDE_IN extended deny ip 10.0.0.0 255.0.0.0 any log
access-list OUTSIDE_IN extended deny ip 172.16.0.0 255.240.0.0 any log
access-list OUTSIDE_IN extended deny ip 192.168.0.0 255.255.0.0 any log
access-list OUTSIDE_IN extended deny ip 127.0.0.0 255.0.0.0 any log
access-list OUTSIDE_IN extended deny ip 0.0.0.0 255.255.255.0 any log
access-list OUTSIDE_IN extended deny ip 244.0.0.0 255.255.255.240 any log
access-list OUTSIDE_IN extended deny ip host 255.255.255.255 any log
access-list OUTSIDE_IN extended permit icmp any any echo-reply
access-list OUTSIDE_IN extended permit icmp any any time-exceeded
access-list OUTSIDE_IN extended permit icmp any any unreachable
access-list OUTSIDE_IN extended permit tcp any object SERVER1 object-group SERVER1_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER2 object-group SERVER2_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER3 object-group SERVER3_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER4 object-group SERVER4_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER5 object-group SERVER5_PORTS
access-list inside-out extended permit ip any any
pager lines 24
logging asdm informational
mtu INSIDE 1500
mtu OUTSIDE 1500
ip audit name OUTSIDE_ATTACK attack action alarm drop
ip audit name OUTSIDE_INFO info action alarm
ip audit name INSIDE_ATTACK attack action alarm drop reset
ip audit name INSIDE_INFO info action alarm
ip audit interface INSIDE INSIDE_INFO
ip audit interface OUTSIDE OUTSIDE_INFO
ip audit interface OUTSIDE OUTSIDE_ATTACK
ip audit signature 2000 disable
ip audit signature 2001 disable
ip audit signature 2004 disable
ip audit signature 2005 disable
ip audit signature 6051 disable
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-509.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (INSIDE,OUTSIDE) source static SERVER1 SERVER1_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER2 SERVER2_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER3 SERVER3_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER4 SERVER4_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER5 SERVER5_PUBLIC
object network LAN
nat (INSIDE,OUTSIDE) dynamic interface
access-group inside-out in interface INSIDE
access-group OUTSIDE_IN in interface OUTSIDE
route OUTSIDE 0.0.0.0 0.0.0.0 205.214.236.49 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
aaa authorization exec LOCAL
http server enable
http 0.0.0.0 0.0.0.0 INSIDE
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 INSIDE
ssh 0.0.0.0 0.0.0.0 OUTSIDE
ssh timeout 5
ssh version 2
console timeout 0
dhcpd option 3 ip 192.168.111.1
dhcpd address 192.168.111.100-192.168.111.200 INSIDE
dhcpd dns 192.168.111.50 8.8.8.8 interface INSIDE
dhcpd enable INSIDE
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username wti password OIEBfkGT1DRShCnN encrypted privilege 15
username admin password g/t7o/eHDKMomDrS encrypted privilege 15
username vpnuser password 8DcFkqJ9hi39UQw. encrypted privilege 15
username sysadmin password mi1AUI982JWkJuWt encrypted
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:6dd04d2527e7929343ebd090969e18a1
: end
ciscoasa(config)# dir
Directory of disk0:/
148 -rwx 15390720 09:08:54 Jul 31 2013 asa825-k8.bin
149 -rwx 27611136 09:43:48 Oct 31 2013 asa902-k8.bin
150 -rwx 2048 00:00:00 Jan 01 1980 FSCK0000.REC
20 drwx 2048 09:12:16 Jul 31 2013 coredumpinfo
151 -rwx 16280544 09:14:46 Jul 31 2013 asdm-645.bin
10 drwx 2048 09:19:42 Jul 31 2013 log
19 drwx 2048 09:20:08 Jul 31 2013 crypto_archive
153 -rwx 14240396 14:14:18 Jun 11 2014 asdm-631.bin
154 -rwx 4096 00:00:00 Jan 01 1980 FSCK0001.REC
155 -rwx 12998641 09:20:28 Jul 31 2013 csd_3.5.2008-k9.pkg
156 drwx 2048 09:20:30 Jul 31 2013 sdesktop
157 -rwx 6487517 09:20:32 Jul 31 2013 anyconnect-macosx-i386-2.5.2014-k9.pkg
158 -rwx 6689498 09:20:36 Jul 31 2013 anyconnect-linux-2.5.2014-k9.pkg
159 -rwx 4678691 09:20:38 Jul 31 2013 anyconnect-win-2.5.2014-k9.pkg
160 -rwx 4096 00:00:00 Jan 01 1980 FSCK0002.REC
161 -rwx 4096 00:00:00 Jan 01 1980 FSCK0003.REC
162 -rwx 4096 00:00:00 Jan 01 1980 FSCK0004.REC
163 -rwx 6144 00:00:00 Jan 01 1980 FSCK0005.REC
164 -rwx 6144 00:00:00 Jan 01 1980 FSCK0006.REC
165 -rwx 6144 00:00:00 Jan 01 1980 FSCK0007.REC
166 -rwx 22528 00:00:00 Jan 01 1980 FSCK0008.REC
167 -rwx 38912 00:00:00 Jan 01 1980 FSCK0009.REC
168 -rwx 34816 00:00:00 Jan 01 1980 FSCK0010.REC
169 -rwx 43008 00:00:00 Jan 01 1980 FSCK0011.REC
170 -rwx 2048 00:00:00 Jan 01 1980 FSCK0012.REC
171 -rwx 26624 00:00:00 Jan 01 1980 FSCK0013.REC
172 -rwx 2048 00:00:00 Jan 01 1980 FSCK0014.REC
173 -rwx 26624 00:00:00 Jan 01 1980 FSCK0015.REC
174 -rwx 2048 00:00:00 Jan 01 1980 FSCK0016.REC
175 -rwx 2505 09:46:08 Oct 31 2013 8_2_5_0_startup_cfg.sav
176 -rwx 1189 09:46:12 Oct 31 2013 upgrade_startup_errors_201310310946.log
177 -rwx 100 16:42:40 Jun 10 2014 upgrade_startup_errors_201406101642.log
178 -rwx 100 14:52:26 Jun 11 2014 upgrade_startup_errors_201406111452.log
127004672 bytes total (21886976 bytes free)
Please let me know if you need any other information from me so that i can get our mobile devices to connect to the new CRM from outside the network and allow the owner access on his mobile device to the company cameras.
************** (NOTE: I can do both of these things currently from within the network without any issues)*************
THANKSJgreene -
This doesn't specifically answer your question, but if you want to get ASDM functionality back you need to load a newer version onto flash memory and then point the ASA to that with the configuration command:
asdm image disk0:/asdm-version.bin
You are running ASA Version 9.0(2) so you need at least version 7 of ASDM to support that. Interestingly enough your "asdm image" statement in your config points to asdm-509.bin and you have asdm-631.bin and asdm-645.bin on flash. None of those will work. I suggest loading up asdm-721.bin and changing the asdm image statement accordingly. I am pretty sure a reboot is required after that is done.
Good Luck!
-Jeff -
Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out ASAP
Hello nitinrathod29,
There are some possible fixes for this issue.
Please check the following thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/47bc6990-00f2-4d85-b3f8-9de03c637f43/visual-studio-2013-update-2rc-stucks-on-creating-system-restore?forum=vssetup
https://social.msdn.microsoft.com/Forums/vstudio/en-US/81478f51-37bb-4dbb-bd0c-beade1fd50ab/visual-studio-2012-professional-installation-getting-stuck-creating-a-system-restore-point?forum=vssetup
So here are them:
1. Check if you have any software which may prevent the installer from running. For example, Windows Defender or any other software which may restrict your permissions.
2. Just start the computer.
3. Run the setup as admin.
4. Check your UAC permissions.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Java and serial port communication
Hello,
In my code i have parsed a file through which i have extracted the port name and baud rate .
Now i want to open the port with this portname and baud rate.
I have a device moxa card which has 16 port and want to open each and and read and write data into it.
thanking you.RXTX seems to be a decent library for serial/parallel communication using Java.
[http://www.rxtx.org/] -
Forms6i and port communication
Hello everybody.
Our organization plan to develop a forms 6i application. But the problem is that a TPE ,"Terminal de Paiement Electronique", is to be used with it. The process is like that : a person inserts his card into the TPE , then all the card data will be sent to the form applicatiopn , or also the application modify data of the card.
But I noticed that forms6i does not have built-ins to communicate with such machines via port communication.
So I want to get help how to solve this problem.
Thank you very much indeed.If I use USER_EXIT, should I put the dll file in the same directory as the fmx files ? You know there are also user_exit examples shipped with forms6i : they are located in %forms6i_home%/form60/userexit. I tried to execute the sample form Ue_samp.fmb but there was an error that the user_exit does not exist ,although all the C files was copied in the directory where I work.
And if I use user_exit with the card reader, do you think that there will not be any problem of communication between forms and the TPE ?
Thank you. -
Hi,
I am extremely new to servers and all their tricky details so I apologize for any seemingly "dumb" questions. I'm sure I'll have a ton.
Essentially it boils down to this...a few months ago I was able (through much frustration) to successfully set up our Snow Leopard Server to run our mail. However, because we are in the midst of having a website built which will be hosted by MediaTemple we were advised to simply have the mail hosted there as well. Unfortunately this brings me to the point I'm at now. I am now trying to set up our server for some different needs and in starting this I reinstalled Snow Leopard and am at square one again. I just wanted to see if anyone could help me set this up correctly for our current needs.
Our current configuration is this: modem to time capsule to server. We have a static IP provided to us by Comcast. We essentially only want to use this server for file sharing with some employees we have across the U.S. and for the iCal capability. I'm assuming this will have to be done through VPN and that it would be easiest if we have a domain name set up with the server. To avoid getting into subdomain territory or any type of clashing with our Public Website domain which is hosted by MediaTemple we'd like to just use an alternate domain such as www.example.info. It doesn't have to be .info...we have at least 3 different ones registered.
Obviously we need it very secure seeing as it's mostly being used to share company files. So I'm assuming we don't want to go the gateway route. Which brings me to how I should configure the port forwarding and all that.
Can anyone help with the best way to configure this thing? Please, please, please!If you're planning on using a VPN for your remote users, then the ONLY port forwarding to setup is for the VPN ports. Nothing else. Once users are connected to VPN they'll act just like any other user on the LAN, so routers, port forwarding and the like don't come into play.
VPNs typically use some combination of ports 500, 1701, 1723, and 4500, depending on the setup. -
Changing of the standard port 1521 and afterward problems with Single Sign
System / Host Environment
Operating System: HP-UX 11i, Existing Oracle RDBMS Vers. 9.2 x, Listener on standard port 1521
9iAS System Architecture: 9iAS Infrastructure and Middle tier (AS Instance) on the same machine
Problem Environment:
-Before and during the installation of 9iAS infrastructure the Listener of the existing Oracle RDBMS was stopped
-The installation of 9iAS Infrastructure (db: IASDB) Version 9.0.2.0 works well
-Afterwards the port 1521 of IASDB changed to 1525. For a detail description of IASB port changing please refer to Doc. ID: 211 929.1 AFTER CHANGE 'IASDB' LISTENER PORT
-The installation of Patch Set 2 (Common Patch 2703110) follows (9iAS is now up to Release 9.0.2.2).
-The Installation of 9iAS Middle tier (AS Instance) Version 9.0.3 follows
Problem description:
-During the installation of 9iAS Middle tier problems with Single Sign On occurs.
The reason of this problems seems a communication problem between the Single Sign On login sequence and the IASDB. After a reset of the port changing (back to the standard port 1521) the installation of 9iAS Middle tier works well.
Through this incorrect and problematic behaviour we have some notes and questions:
-Well at first the description of the port changing in Doc. ID: 211 929.1 seems us incomplete. Some configuration still carry on the standard port 1521 and not the knew value of the port 1525.
-So we want to know all configuration files and parts where we have to change the port value manually ?
-What will happened to the Single Sign On function with this manually port changing. Does Single Sign On works later on correct or have we to change much more ?Currently, changing the listener port is not supported. It must stay on 1521. I believe this is to be fixed in a latter release (perhaps 9.0.4)
-
Title says it all:
How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.Hi Auracles1,
Here's a pretty discussion regarding wireless printing with this device and a Mac.
http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/HP-Officejet-6500-E 709n-wireless-issue/m-p/258853
I have a similar OfficeJet and it was a multi-step process. (1) Install printer drivers on the machine, (2) Add the printer queue in print & fax, (3) Run the "setup wizard" from the disc for wireless printing. -
How can I set up a WD My Cloud with my Airport Extreme - I can't get it to open ports 80 and 443?
For remote internet access to the WD My Cloud Mirror, I have been advised that ports 80 and 443 must be open in order to reach the WDMyCloudMirror. My Motorola Gateway (Surfboard SB6141) is connected directly to my Airport Extreme (WAN port) which is in turn connected to the WDMyCloudMirror (all by ethernet cables). I do not have FULL instructions on how to properly manually configure the Airport Extreme to open the ports. I have tried an earlier posting which provides many of the steps, but not all of the required information is included (how to determinge the IP address to be assigned, etc.). I did the best I could with the information given, but the test using "YouGetSignal" showed the ports as still closed and attemps to reach the WDMyCloudMirror by the internet failed as well (of course). The WDMyCloudMirror has enough Apple "stuff" included in it (software, I suspect) that an Apple legal acceptance is required for its set-up, yet Western Digital Tecnical Support is unable (or unwilling?) to help with this aspect of its configuration required to work within the Airport Extreme environment. I have returned the WD My Cloud Mirror to Amazon as "not able to work", but I have not given up the hope that I can eventually get the ports open so that I can get this cloud device, or one similar, to permit remote internet access.
Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course. -
I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
Question about Photoshop scratch disk and specific setup
Hi Folks
Thanks for the help in advance.
I'm a novice and need help finding a solution to a new PC Build. (Windows 7 Pro 64bit with Photoshop CS6)
I only recently found out about having a scratch disk dedicated for photoshop (very novice i know ), and was wondering if a 120-128GB SSD would be enough? (Please bear in mind I can't fit large SSD raid configs to my budget, plus I live in New Zealand, so prices are higher for SSD at the moment).
I only edit single camera RAW files at a time around 25mb per file, with no large amount of layers and very rarely do large images i.e. Panorama etc. I have searched the forums but could not find a concrete answer.
My setup was originally meant for a HTPC (I don't intend to overclock), but I will also be using it for light photography projects. Specs below:
CPU: Intel i7 3770
Mobo: Asrock B75 Pro3-M (or Asus P8H77m Pro, depending on budget)
16gb Ram (maybe bump up to 32gb later)
120-128gb SSD for OS and apps
120-128gb SSD scratch disk
2 TB HDD for storage
If anyone knows, the motherboards I've listed have 3x Sata3 ports, Asrock has one Intel chip and two Asmedia controlled Sata3 ports, while Asus has 2x Intel controlled and 1x Marvell controlled Sata3 port. If I went with the Asrock, would it be okay to connect the OS/Apps SSD to the intel controlled sata3 port and have the scratch disk and storage HDD to the Asmedia sata3 ports?
And one more novice question, when I begin to edit my images, is it best to transfer my photos from memory card to storage HDD then work from there? Or would it be quicker opening images direct from a USB 3.0 card reader / USB 3.0 external hard drive?
Thanks again everyone, really appreciate itpriddye wrote:
Just to clarify, if/when I get one 256gb SSD for my main C: drive, I can load the OS/Apps and store some data for the time being (until I get another SSD) and use the 2TB HDD for scratch disk only?
Yes, that's what I meant. You could try putting Photoshop scratch on C: at least temporarily, and watch your free space carefully. If you don't work on big documents or set your history states to be very large, it might be workable. But be careful. The safe "set it and forget it" configuration is to make your HDD the one and only Photoshop scratch drive.
When I do get around to getting the second 256gb, I will look at installing the two SSD's in RAID configuration. If i were to do this, can I load the OS/Apps to the RAID SSD's as well as using them for scratch disks and have the 2TB HDD for storage? I hope that makes sense.
Sounds about right; with 512GB on tap you should be able to run just about everything from C:, as long as you don't keep your entire photo library on there. Realistically, on a big system that's got a lot of apps installed and has been used for some time, Windows and your apps may end up consuming 100 to 150 GB, so that would still leave you a lot of breathing room.
Keep in mind that what you describe may require 3rd party re-partitioning software and/or backup and restoral, or a complete reinstallation of Windows and everything (usually the latter is what is recommended when moving up to a RAID system volume).
By the way, SSDs stay in best working order if you overprovision - i.e., maintain a fair amount of free space. The internal controllers need the free space to keep the data organized well and maintain top performance.
-Noel -
Need help regarding Apache httpd.conf and PHP setup.
Hi,
I am facing problem setting up my PHP and apache setup. I have installed Apache2.2 Root path = C:\Program Files\Apache Software Foundation\Apache2.2
I have also installed PHP in my C:\PHP drive earlier. I moved this PHP folder to C:\Program Files\Apache Software Foundation\Apache2.2 just to keep all things at one place.
I have copied php5ts.dll at 4 locations - C:\Program Files\Apache Group\Apache2 \bin , %SYSTEMROOT%\System32, %SYSTEMROOT%\system and %SYSTEMROOT%. I have also added these paths in Environment variable 'PATH'.
In httpd.conf file entries are as follows:
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
I have added these 3 lines as
LoadModule php5_module php/php5apache2.dll
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
When restarting apache http server I get message as:
httpd.exe error ...... cannot load C:\Program Files\Apache Software Foundation\Apache2.2\php\php5ts.dll into the server. The specified module could not be found.
I have checked that php5ts.dll DLL exist at above path. Please help me out urgently.Sorry I don't have Windows available to check the paths. With recent versions
of PHP I never copied files out of the php source directory.
Make sure the Oracle 10g Instant Client is in your PATH environment variable.
You could try using the PHP Windows MSI installer.
cj -
Oracle SOA Suite 11.1.1.5.0 installation setup files
Hi,
Please share me the Oracle SOA Suite 11.1.1.5.0 and OSB installation setup.
like Oracle Weblogic server for OSB, RCU, SOA Suite.
I could able to find in Oracle site only the latest SOA version [11.1.1.6.3] not the older versions.
Thanks,
PradeepPradeep,
You may find 11.1.1.5 installable at https://edelivery.oracle.com
It is recommended to use latest version available though.
Regards,
Anuj -
Informatica 9 download and installation process on windows 7 pro. 64 bit
Hi All,
Would like to download and install informatica 9 on windows 7 professional 64 bit OS.I have gone through all community posts and discussion over here and have a done a lot google search.But the same download files are not available currently in oracle site guess it used to get update as per the market availabilty.
e:g community discussion.https://community.informatica.com/message/91640
Can someone please help me out to the steps to download (exact files including licenses files) and installation steps.
Regards,
BikashLogon to edelivery.oracle.com
and then select Business Intelligent and then download Powercenter with DAC 9.1
follow the same steps what you found on net for installation
if helps mark
~ http://cool-bi.com -
I started a support case with Microsoft to help me with raising the our domain Forest level because i received a message stating that there were Windows 2000 PDC still listed in the database. These PDCs were removed years ago. The tech saw all of the problems
i was having with domain replication so that is where he started. running the MS PortQryUI shows that ports 3268 and 3269 are not listening, (TCP port 3268 (unknown service): NOT LISTENING) when run FROM a Child domain controller against the Parent
Domain controller. Between the 2 Child domain controllers these ports are listening.
The Windows firewall is not running on any of the controllers, i removed a virus protect client from all of the servers, although i didn't enable the firewall there either, but these ports are still not listening on the Parent DC.
I need help debugging this. I am not very familiar with network sniffers so if i need to run one i'll need some guidance. This DC only has one NIC, all IP addresses are static, all servers are setup like this. All servers are in the same subnet, on the same
lan, on the same cisco switch, there shouldn't be anything blocking this port from starting.
I looked over other post that show this same problem, but they don't give a solution. If i am not using the Windows firewall why wouldn't these ports be open?
Any ideas? web searches are all over the map on trying to find the reason for this.
BobbyTry running the below command on the DCs that you think have the ports blocked or all the DCs.
netdiag /test:ipsec /debug > c:\dcname-ipseclog.log
Open that from the C drive and see if there is anything saying block or filters.
Also, just for kicks have you disabled the firewall service on the DCs?
And just for kicks have you tried enabling firewalls ports on all the DCs? The KB is below
http://support.microsoft.com/kb/555381/en-us
Step 1 - netdiag results
Step 2 - disable the firewall service on all DCs if step 1 was negative
Step 3 - enable the firewalls on all DCs per KB 555381 if step 2 doesn't work
Let us know how it goes!
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection
Maybe you are looking for
-
Voice recognition worked perfect in my new car until about a month ago. Thinking it was when I updated to 6.1.4. Now it never understands what I am saying when trying to call one of my contacts. If I say a number to call, it can understand that, bu
-
Trivia Game: Error while testing CS3 app in CS4
I have been attempting to test an exercise file for a Trivia Game written in AS3 using the Flash CS3 IDE. Unfotunately I have been receiving two errors each time its run while using Flash Professional CS4.: <ol> <li><strong> 1023: Incompatible overri
-
Hi I recently bought an iPad and when I plugged it in to my laptop, iTunes didn't recognise it. After this I tried to plug I'm my iPhone which I regularly plug In and now it doesn't recognise that either. What have I done wrong?
-
Hi I have this really big problem with my iTunes. It keeps on skipping some songs and not others. I haven't purchased anything from the Itunes music store and i've tried to de-authorization method but it just keeps on saying i've got an error. I reme
-
GR processing time can be customer based
Hi, Would like to know whether for GR Processing Time can be customer based instead of setup in Material master? Please kindly advise. Thanks Regards, shirley