Port range fowarding wrt54g error message

im not very tech savy so im not really sure of technical name and such. I am trying to open ports for my xbox 360, ports 88(udp),3074(both),53(both), and 80(tcp).when i click save changes an error message comes up saying DUPLICATED APPLICATION NAME! PLEASE CHANGE YOUR ENTRY!
PLEASE HELP
thankyou 
goalkeeper202046

Use different application names for each forwarding, e.g. "xbox1", "xbox2", etc. Each entry needs a unique name.

Similar Messages

  • FTP Passive Port Range Fowarding

    Hi,
    Im using vsftpd on a Linux Server and I need to forward a port range to this server (passive mode).
    I can do it with any of the other routers I have but not with the RV220w.
    I created a custom service with a start and finish range, but there is no place to enter a range under the Port Fowarding tab like I have with the other routers.
    Im using the latest firmware by the way.
    Any tips ?
    Thank you

    Hi , 
    Can you try please to do Access rules instead of Port forwarding. under firewall --> access Rules
    from WAN to LAN | always allow | Choose your service | Source = any | Dnat = Local IP server
    Enable rule 
    Please let me know after your testing
    Please rate this port or marked as answered to help other Cisco Customers
    thanks
    Mehdi

  • When I connect to USB port error message appears on computer screen and i tunes software shuts down. This is a brand new ipod shuffle.

    When I connect my brand new ipod shuffle to the USB port I get an error message on the computer screen and the i-tunes software shuts down.

    URGENT help please!!! I have looked everywhere on the internet and theres no information on anything

  • Error message caused by an improper shut down

    Hi
    When I try and lunch the web services from server admin I get this message in the log.
    Address already in use: make_sock: could not bind to address 192.168.1.15 port 80
    Is this error message caused by an improper shut down, the apache processes are still hanging around and apachectl restart won't work.
    How can I clear them
    Thanks
    Message was edited by: stevewaters

    That message could be caused by many things - either a pre-existing copy of Apache, or some other process altogether.
    Did you install/enable Apache 2 on your server? If so, that could be the problem since Server Admin only knows how to manage Apache 1.3, so can't restart Apache 2.0.
    You can use the command-line tool lsof to find which process is listening to port 80. You'll then need to make the call as to how to fix it - either by shutting down the process, killing it, or changing the port that your Server Admin configuration listens to:
    <pre class=command>sudo lsof -i :80</pre>

  • TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

    I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

    Did you try this:
    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.
    Also see:
    HT4061 error message 3014.: Apple Support Communities

  • OBI11g intallation issue - Error in validating the port range for auto port

    I am using the intaller to install OBIEE 11g on my machine. When I get to step 6, I receive the error messages below. Currently I also have OBIEE 10g on my machine so the ports may be already used.
    Does any one know how I can resolve this issue? I previously installed both 10g and 11g on my old laptop but I can't figure out why I'm getting these errors this time.
    INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    INST-08010: Error in validating the port range for auto port allocation. At least 9 ports should be free within the range 9700-9999 for the BI System Components.
    Ensure that a minimum of 9 ports are free within the range 9700-9999 for auto port allocation to work correctly for the BI System Components.

    your hosts file have duplicate name that point to two different IP addresses.
    10.37.29.1 test1.xyz.com
    10.10.10.1 test1.xyz.com

  • INST-08010: Error in validating the port range for auto port allocation

    Hello guys, I am using the installer to install OBIEE 11.1.7.0 on my machine. When I get to step 6, I receive the error messages below:
    INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL.
    Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL.
    INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    My Operating System  below:
    Linux Red Hat 5.9 X86 64bit
    My uname -a are below:
    Linux redhat59 2.6.18-348.el5 #1 SMP Wed Nov 28 21:22:00 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
    My /etc/hosts file are  below:
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    127.0.0.1   localhost.localdomain localhost
    10.10.80.19 redhat59
    My /etc/sysconfig/network are below:
    NETWORKING=yes
    NETWORKING_IPV6=no
    HOSTNAME=redhat59
    GATEWAY=10.174.27.228
    My /etc/sysconfig/iptables are below:
    # Generated by iptables-save v1.3.5 on Tue Dec  3 17:01:17 2013
    *filter
    :INPUT ACCEPT [425:33860]
    :FORWARD ACCEPT [0:0]
    :OUTPUT ACCEPT [307:40164]
    COMMIT
    # Completed on Tue Dec  3 17:01:17 2013
    My ifconfig are below:
    eth0      Link encap:Ethernet  HWaddr 52:54:00:55:9B:C9
              inet addr:10.174.27.233  Bcast:10.174.27.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:200216 errors:0 dropped:0 overruns:0 frame:0
              TX packets:95849 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:110668992 (105.5 MiB)  TX bytes:209784134 (200.0 MiB)
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:109200 errors:0 dropped:0 overruns:0 frame:0
              TX packets:109200 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:257845896 (245.9 MiB)  TX bytes:257845896 (245.9 MiB)
    my /etc/sysconfig/network-scripts/ifcfg-eth0 are below:
    # Virtio Network Device
    DEVICE=eth0
    BOOTPROTO=static
    BROADCAST=10.174.27.255
    HWADDR=52:54:00:55:9B:C9
    IPADDR=10.174.27.233
    NETMASK=255.255.255.0
    NETWORK=10.174.27.0
    ONBOOT=yes
    Have any suggestion please?
    Many Thanks
    D

    In setDomainEnv.sh set debugFlag=false or you can just remove it.
    NodeManager is a charm after that. it can take any number of ports.
    Cheers !!

  • Error message connecting a Vista Computer to WRT54G v6

    I just bought a new computer and I am trying to connect it to the router by using EasyLink Connect.
    I keep getting an error message that the computer doesn't have a wired connection to router.  But it is connected correctly.
    I disabled the firewall, but it didn't help.

    I hope Embarq is a DSL connection ::
    Configuration for DSL connection:-
    Before doing the following steps, you have to connect the modem to the
    router's Internet Port and the computer to the Ethernet Port Number 1.
    1. Press and hold the reset button for 30 seconds.
    2. Then, unplug the power keep holding down the reset button for
    another 30 Seconds.
    3. Plug back the power back in, and keep holding down the reset button
    for 30 Seconds.
    4. Release the reset button.
    ===================================================================
    Access the setup page of the router by launching an
    Browser and type on the address bar, 192.168.1.1 and press enter. When
    it prompts for the username and password, leave the username field
    empty and provide password as "admin" (Without quotes)
    click on ok.
    On the main setup page the ""Internet Connection Type"" should be
    on ""Obtain IP Automatically - DHCP ?. Click on the Save Settings
    button.
    Now click on the sub tab ""MAC address clone"".
    - Click on enable
    Click Clone & click save settings
    Check WAN Ip on Status page of router ....
    If getting Valid Ip .... try going online
    If not ... power cycle for 4-5 minutes & then agian check the WAN Ip address .....
    With these settings you will be able to go ONLINE!!! using the router wired as well as wireless.

  • Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certif

    Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certificate ______ cancel ______ continue....  This thing is so annoying when trying to go somewhere i just want the error message to go away.

    In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
    http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

  • Error Message on attempting to delete a Number Range in CO82--Msg No-NR019

    While deleting the Number range groups in CO82, initially I was able to delete them, but later, I was not able to do so. The error message is as below.
    "The number range number 18 does not exist
    Message no. NR019"
    What is the implication and how to solve or correct this?
    I have seen the earlier threads, but the solution is not clear.
    Thanks in advance
    Sanjay

    Closing the issue

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Number range does not exist error message while releasing billing document

    Hi,
    We are trying to release a billing document to Accounting through VF02. But the system throws an error message that "For object RF_BELEG 1000, number range interval  does not exist FBN1".  Note : System does not specify which number range is missing...
    There are existing number range intervals for the company code which looks fine. Any advise where this number ranges are missing.
    Regards,
    Sakthy

    Hi,
    I suggest you to check the which document type has assigned for biiling document and against that document type , have to ssign the id for number range and check whethere internal assignment or external assignment.
    I hope this will make sense.
    Panneer

  • Error Message "No logical port exists to call web services" installing SM7

    I am trying to use SLM to download a service stack.  However, the option is not available in step 2.5.  There is an error message "No logical port exists to call web services".  I have performed the Wizard install, but the Wizard seems to have left out this step.  I have looked around for documentation on how to configure the port, but cannot find anything more useful than comments to the effect that I should configure the port.

    I found the problem, I think, although I am now on to the next problem.  "Web Services for software lifecycle manager not available'.
    The documentation is lacking.  When the RFC connection is set up, the user id is j2ee_admin, using the install password.  This is not specified anywhere in the install instructions that I could find, there is only a reference to a 'user id and password'.
    The LPCONFIG is used to create a logical port, that ties the RFC to the LP.  However, no name is specified that is to be used for the LP.

  • "Port In Use" error message when trying to sync Palm m500 to Windows Vista machine

    An error message on my Palm displays "Error: Serial Port in Use (Serial 0307)" when I try to sync my Palm m500 to my Windows Vista (32 bit) Home Basic machine. It worked until about 3 months ago and I don't have a restore point that far back to try System Restore. I've upgraded to Palm Desktop 6.2.2 (was using 4.xx) and downloaded the PalmHotSyncSetup from Pimlico Software but nothing helps. Any ideas are appreciated.
    Post relates to: Palm m500

    I would try connecting the Palm's cradle, with the Palm in it, to your PC and then, in Device Manager, right-clicking on Palm Handheld #2 and selecting Uninstall Driver.  Palm Handheld/Palm Handheld #1 could be visible if you connect the Palm to USB port you may have tried using perviously.
    After uninstalling Palm Desktop, reboot the PC, make sure Palm Desktop 6.2.2 is installed (since you are using Vista) and then try reconnecting the Palm.
    One last thing: Make sure that you are using a 32-bit version of Windows.  There is no 64-bit USB driver support from Palm or ACCESS.  If you do have a 64-bit version of Windows Vista installed, that would clearly explain why you are having so much trouble getting your m500-series PDA to sync. This thread tells you how to check for a 32 or 64-bit install of Windows.
    Alan G

  • TS2634 My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What

    My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What can I do next since it doesn't give me even one clue as to what the error would be?

    Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted :  a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone.  I deleted that event, then went through the calendar resync one by one, and all seems OK now.
    In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them.  It would be nice to have a similar way to work with Calendar!
    Thanks for pointing me to the right article.

Maybe you are looking for

  • Is there a limit on number of characters for WPA2/AES on Itouch 4th Generation, IOS 5.0?

    Seen on a few sites that the Itouch prefers 10 to 24 characters, 24 being the maximum.  We are using MobileIron to create profiles, and the current WPA2 Pass phrase is 58 charcters long in ASCII format.  Any help is greatly appreciated. King regards

  • Using iWeb to host podcasts

    Hello, I have just been emailed by Apple to say my submitted podcasts have been approved and will be available in a few hours to download and subscribe too, but there seems to be a problem getting the podcasts to download... I have submitted it via i

  • Multiple cursors and xmlforest

    This is my first time working with XML in PLSQL. I'm trying to parse values from a plsql procedure into a Word document using XML. My procedure looks something like: CREATE OR REPLACE PROCEDURE GET_XML_FA (PP_ID IN VARCHAR2, PP_PERIOD IN VARCHAR2 IS

  • Port Configuration EDI/IDoc

    Please anybody can explain me in detail Port Configuration for EDI/IDoc(T Code WE21). please explain how can i create new port. it's urgent please. thanks RP

  • Organizer 10 freezes up

    I just installed Elements 10. The edit portion seems ok, but when I start with or toggle to the organizer, my screen shows recent photos as it searchs for more. The message says 2% has loaded, but it never seems to be able to advance from that point.