Portal Configuration Issue

Hi All,
I have configured a SAP provided standard iview,assigned this iview to a page ,then this page to a workset,then this workset to role and the role to two users.When I am testing the respective page through a test user ID the contents of that page is displayed correctly,for other user the contents are not getting displayed.So,what can be the possible reason for this kind of issue.
Thanks,
Khyana Prabha Mohanty

Hi Khyana,
If you are using the ess/mss iview, then you can check the authorization in the SAP system for particular user.
Check the defult trace log for the userid. login to /nwa and monitoring > logging and tracing >> default trace > search with userid
Hope it will helps
Best Regards
Arun Jaiswal

Similar Messages

Enterprise Portal Configuration Issue - GRC 10.0

Hi All,
I am following AC10EP Configuration guide to integrate portal and GRC 10.0.
According to the configuration guide i need add any entry for SPML under AUTH integration scenario as shown below.
When I am trying to add the same in my system i am getting the issue as "Choose the key from allowed namespace" as shown below.
Please suggest if there is any solution to get this fixed.
Regards,
Sai.

Hi Prasant,
Thanks for the details.
I have made all my configuration correctly. Just now my issue got fixed. I got the same message as shown above and when i clicked on ENTER button it just accepted and went through.
It is just a warning message and i stopped seeing it without clicking on ENTER button
Though its not a issue, I made it an issue for myself
Hopefully if anyone come across the same should correct it seeing this post
Regards,
Sai.

BizTalk ESB Portal Configuration Issue

Hi,
Can anyone please help me to resolve this below issue?
Actually i have installed/configured ESB toolkit in Dev server and Hosted ESB web site and Webservice. all are in same machine. I am able to successfully browse the portal and able to see the exceptions.
but when i installed/configured ESBToolkit in another environment, here BizTalk is in one machine and DB is in another machine. and the Web site and WS is hosted in Biztalk machine. initially i got few configuration errors which i was resolved and after
that i am getting the below errors.
Error:
1.       Index (zero based) must be greater than or equal to zero
and less than the size of the argument list.
2.       Syntax error or access violation. Source: Microsoft.Practices.ESB.BizTalkOperations.BizTalkQuery
Warning:
1.       Exception message: An unexpected error occurred during
initialization of the BizTalk Operations Service. ---> Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
The above error is getting from “ESB.BizTalkOperationsService” web service which was created while configuring ESB Toolkit. The ESB Portal is accessing this web
service and getting the data.
I have verified the Portal source code, and find out ESP web site is calling Application() method in the ESB.BizTalkOperationsService.
that time i am getting this error. this will happen only two diffferent servers for biztalk and DB.
As per my understanding, this method is getting the BizTalk application details from BtsmgmtDB. but one thing i noticed, in the web.config
in ESB.BizTalkOperationsService does not have the Db connection string. so I am little confused how it is getting data without
DB details.
I referred some URLs and verified the user permission/ authenitication. every thing is correctly configured.
I
Can anyone please help me to resolve this issue?
Best Regards,
Vinoth

Hi Abhishek,
Thanks for your Quick response.
I did the above steps as you mentioned above. now i am getting 2 errors and waring like
First Error in Event viewer
Error in the application.
Source: Microsoft.Practices.ESB.BizTalkOperations.BizTalkQuery
Method: Void .ctor()
Error Source: Microsoft.BizTalk.ExplorerOM
Error TargetSite: Void set_ConnectionString(System.String)
Error StackTrace:    at Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer.set_ConnectionString(String value)
   at Microsoft.Practices.ESB.BizTalkOperations.BizTalkQuery..ctor()
second error:
1.       Index (zero based) must be greater than or equal to zero and less than the size of the argument
list.
Warning:
1.       Exception message: An unexpected error occurred during
initialization of the BizTalk Operations Service. ---> Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
do you have any idea about this?
Thanks,
Vinoth

Portal communication Error / Configuration issue.

Hi All,
I am not able to open a web templet in the Web Application Designer,
it gives a pop up saying : The request operation could not performed due to portal communication error,
portal unavailability or Configuration issue.
Thank you,
Nisha Jagtap.

Hi Nisha,
1 Logon to portal
2. Goto System Administration  System Configuration  System Landscape .
On the Right hand side Portal Content folder is displayed. Open it and check if a subfolder Systems and find the system which used to integrate bw and ep.
check the below thread for configuration of sso between ep and bw which gives you claer idea
SSO steps between EP and BW System
Koti Reddy

9iAS 1.0.2.2/Portal 3.0.9 - Installation Error at "Portal Configuration Assistant"

I was installing the iAS1.0.2.2 and at the Portal Configuration Assistant, at the 23% I received the following error:
"An unexpected error ocurred during the Install Process. Check the install.log ....."
(FYI this is the second time I try to install it and in both cases I received the same error at the same point, so I decided to ask for help)
At the end of the Install.log is the following:
=====================
STEP 7 : Installing WWC layer Components
INSTALL_ACTION : installWWC(): ..\..\bin\sqlplus portal30/portal30@<DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)HOST=administrator)(PORT=1521)))(CONNECT_DATA=(SID=virtual))) @..\..\portal30\admin\plsql\wwc\wwcinst.sql portal30 USERS TEMP wvinswwc.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
ORA-00439: feature not enabled: Function-based indexes
Errors encountered in the Install process. Installation Aborted
=========================
I noticed during the installation, before the Configuration Assistant (aprox at 97%), the installation opened a DOS session and I could see some errors with some Indexes but I don't know in which Log are registered. maybe it can help to troubleshoot my above problem?
Operating System: NT4 SP6
Database: 8.1.7.0 standard edition
iAS 1.0.2.2 standard edition
both under the same machine
Let me know if there is any other info I can provide.
Tks in advance!

There has been some confusion around certification on SE over the past week. I want to clarify the situation.
We discovered an issue with the Portal on SE last week. We inadvertently used function based and bitmapped indexes (EE only features). This issue has been masked to date because the install proceeded normally after the errors were raised. In 3.0.9 we made the install more strict in that it will stop by default if it hits an unexpected error.
On further research, we have determined that these errors have little or no impact on the general functioning of the product and as such are maintaining the position that Portal 3.x is indeed certified on 8.1.7
Standard Edition.
There is unfortunately a necessary work around to the install issue (which we will rectify as soon as possible). In order to install on SE, you must execute the Oracle Portal Configuration Assistant (OPCA) from
the command line and specify the "verbose" mode (see next post). In this mode, the errors are ignored and the install proceeds appropriately.
Regards,
The Oracle9iAS Portal Development Team

Configuration Issue in User Mapping ..

Hi,
Pls help resolve this issue..
When i go to " UserMapping " option using the "Personalize " link , i get the following error msg..
"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system"
Also , if i go thru "User Administration -> User Mapping "
then it says,
--"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system .
Usually reason is user mapping being configured for Strong encryption, but necessary additional files might be missing.Check Security log file for information "--
I am not able to solve this problem..Pls help
Thanks in advance

Hi Venkat,
Here the quick and dirty solution:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
I would rather recommend to install the unlimited strength jurisdiction policy files.
For more info on this, check this thread:
JCE Jurisdiction does not allow Portal to start
Hope this helps,
Robert

BAM Portal configuration error in BizTalk Server 2013 R2

I have tried 2 attempts to build out a BizTalk Server 2013 R2, I have followed the MSDN Install instructions, and I keep on getting an error when configuring BAM Portal. I have the logfile available, I need to know what the experts need to see in order to
give me an answer. Understand that we have been using BizTalk Server 2013 for the last two years, and a new developer wants the R2 version and BAM Portal configured. As an administrator I have fought this to no end, and now I have enough evidence to go back
to our project manager and explain why you do not install every feature on a server. Prove me wrong EXPERTS!

" I need to know what the experts need to see in order to give me an answer."
Experts needs:
1) Little background of the issue you are facing.
2) The log file generated.
3) The configuration of your server.
"now I have enough evidence to go back to our project manager and explain why you do not install every
feature on a server."
Disagree, It is indeed possible to install all the components and feature on a server. Somewhere someone would have installed BizTalk 2013 R2 and all its components in exactly same server configuration successfully in which you are trying to achieve, the
only difference could be a missing Package, Patch, Cumulative Update, Service or any configuration miss at your end.
Pls read more about BizTalk 2013R2 installation on Installation Overview for BizTalk Server 2013 and 2013 R2.
Review the Hardware
and Software Requirements for BizTalk Server 2013 and 2013 R2.
Understand the Considerations
Before Installing BizTalk Server 2013 and 2013 R2.
Prepare Your Computer for Installation.
Specifically for BAM Portal. Microsoft has documented Prerequisites, Permissions and Considerations.
Planning for the BAM Portal
I would advice you to refer this post by Sandro . BAM Portal configuration error
Rachit

ISE 1.2 AUP Multi-Portal Configuration

Currently we have ISE 1.2 configured using a multi-portal configuration. We use a guest portal for both Guest Access and for devices we consider non-compliant employee. Guest users are authenticated against an inernal user database in ISE, and the company owned devices auth against AD. If we login with a guest account that was created using the sponsor portal, we do not get the acceptable usage policy to check before getting access. If we login using the AD account, we do get the Acceptable Usage Policy to check before getting access. It appears this is the same portal, so why do we not get it for both?

for guest AUP configuration
AUP for posture assesment config

Portal display issue in Portal 7.3 version

Hi Experts,
We are using portal 7.3 vesion,one of the user getting portal disply issue,it is not appearing proper ess portal screen.
we checked with other user,they will not getting the same issue,it is only one use faceing this issue.
please let me know what is the root cause of the issue.
Thank you in advance..
Regards,
Jyothi

Hi All,
pradyp: sorry for the delay reply, yes they have adobe flash player in their systems.
in google chrome and mozila, its looking good. actually we have two company users like A and B,A company user dont have this problem but B company some of the user( only mss role users) have this issue.
Earier we have assigned new theme with new logo to the B company users through rule collection.
my understanding the problem arraised with new theme with new logo.am i right ?
Could you please help me any one.
Regards,
Jyothi

Configuration issue of syslog.conf

Dear All,
My client is facing a configuration issue of syslog.conf.
They have set a cacti on a Linux server for monitoring of all servers snmp & syslog.
The part of snmp has set up successfully but cannot send the syslog to the cacti.
My client want the syslog can keep on the localhost and send to cacti for monitoring
we have tried to do the following things for make it work:
Insert the information (*.* @10.251.99.74) in /etc/syslog.conf
Restart service of system-log
Deleted all word of loghost in the /etc/hosts file
But still not work. Anyone can give me suggestion or idea about this?

Thank you for your reply.
It is tab. But I think the problem is solaris cannot use *.* to represent all logs.
I have used the following is work
*.err;ker.debug;daemon.notice;mail.crit @10.251.99.74
If that is not the mail reason, please put me right.

Anti-relay filter configuration issues

Configuration issues with the anti-relay filter in Messaging Server 4.1x.
The following information addresses common questions about configuration issues
with the anti-relay filter in Messaging Server 4.1x: 

<OL>
<LI>Question: 
What is the difference between the delivery
and submission
options? 

Answer: 
The submission option
allows specified users to send email to any email address in the world.
These users are typically internal users.

The delivery option
allows specified users to receive email from anybody. These users
are also typically internal users.

A standard filter will appear something as follows: 

# This is the anti-relay config file written by Jay at iPlanet
# The first section sets default conditions
resolvehostnames:0
useauthinfo:0
advertiseauthinfo:1
# This section sets domains to be delivered to by anybody
delivery:*@my.domain.com
# This section sets domains that can send any place
submission:129.12.4.*


<LI>Question: 
The delivery
option works properly. However, why doesn't the
submission option
appear to be allowing emails from specified users to pass through?

Answer: 
The problem with the submission behavior could be due to the setting of the
the resolvehostnames
parameter. If this parameter is turned on
(resolvehostnames:1),
then all entries in this configuration file must be fully qualified
host names. Although wildcards will work, you cannot specify IP
addresses with this configuration setting.


<LI>Question: 
Is it possible to allow people outside of my network to connect to the server
and send mail out?

Answer: 
Yes. To allow outside users to connect to the server and send mail
to any address, without granting the same privilege to the rest of the world,
activate the authenticated SMTP portion of the filter via the
useauthinfo option.
Setting this parameter to "1" (i.e., useauthinfo:1
) will require a user who is not in a
submission address and who is attempting to send email to an address not in
the delivery range to authenticate with a user ID and password.
</OL>

For additional information on the anti-relay filter, please refer to the
Messaging Server 4.1 Administrator's Guide at 

http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/ubefiltr.htm#1073677

Prashant:
Are you using a UBE filter to configure domain-based anti-relayinging? We had better luck with the anti-relay plug-in. There is some info on this (for 4.15) at
http://docs.sun.com/source/816-6044-10/ubefiltr.htm#1069973
You have to enable the plug-in using configutil, per the above. The anti-relay plug-in is controlled by antirelay.conf. Be aware that the pattern matching rules are very limited, and not well documented. Fortunately, the source code to the plug-in is included, and you can see what it is doing. To pass the tests we had to add a hard-coded test for a "%" in the source and recompile:
*** antirelay.c.orig Thu Oct 31 04:42:13 2002
--- antirelay.c Thu Oct 31 04:22:07 2002
*** 934,939 ****
--- 934,940 ----
* Weight must be non-zero to begin with so that matches on just "*"
* will work.
+ if( strchr(text,'%') != NULL ) return ABORT;
weight = TRUE;
for ( ; *p; text++, p++) {
if (*text == '\0' && p != '')
Not a really elegant hack, but we didn't need a fully functional regex engine.

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue
=============================================
Hi All,
I have installed Oracle 11g Fusion Middleware (11.1.1.3.0) on Oracle Linux 5 and getting some issues while configuring. What's happening is that when I run my report, it looks for the library attached to it. If I define the REPORTS_PATH in reports.sh, it works fine.
What I want to achieve is to push reports to use REPORTS_PATH environment variable from rwserver.conf instead of reports.sh
Someone told me to remove the REPORTS_PATH from reports.sh and add the REPORTS_PATH from reports.sh to a default.env in rwserver.conf, but it didn't worked.
What I know about the report server stuff in 11g Fusion Middleware is that it consists of two different servers (Standalone and In Process). Our application runs report using SRW.RUN_REPORT which basically use In Process report server setting in rwserver.conf to run the report.
The heirarchy in which reports try to look for the REPORTS_PATH is
1) REPORTS.sh
2) rwserver.conf
3) Settings as per Oracle Enterprise Manager Configuration Settings.
My standalone report server name is ReportsServer_hostname_asinst_F and the In Process Server name is rep_wls_reports_hostname_asinst_frd. When I define rep_wls_reports_hostname_asinst_frd (In process Report Server Name) for the server name parameter, I do not get any results for the report run using srw.run_report. Also I can't see the reason behind the report executed because of the following issue
http://hostname:8888/reports/rwservlet/showjobs?server=rep_wls_reports_hostname_asinst_frd
REP-51019: System user authentication is missing.
** the Singlesignon in rwservlet.properties is defined as no
But when I define ReportsServer_hostname_asinst_F (Standalone Report Server Name) as server parameter and ran the report using srw.run_report, I get result with the REPORTS_PATH defined in reports.sh not using rwserver.conf file.
http://hostname:8888/reports/rwservlet/showjobs?server=ReportsServer_hostname_asinst_F
(which shows the report just run).
Can someone who did Report Server configuration using ENV files (changing rwserver.conf), pls. send me the screenshots. Want to make sure if I am changing the correct files under correct location.
Pls. feel free to ask me questions related to the environment set up.
Thanks

Your question belongs in {forum:id=84}
John

Profit cebter and copany code configuration issue

i am making one sales order in which the item number level when i put profit center GB03100004 earlier i was getting company
code in profit segment as GB03, but now i am getting as GB01.
is this related to any configuration issue, please let me know.

Hi,
Goto the T.Code KE53.
Enter the Controlling area.
Enter the profit centre.
Click on Company Codes.
Check for which company code the field "Assigned" is ticked.
Please check with your FICO consultant for more information and modifications.
Regards,
Krishna.

Error in portal configuration assistant

Hi,
While trying to install Oracle instant portal, I am getting an error during portal configuration assistant step.
ORA-12154 : tns cannot resolve conn ...
What do I need to do in order to fix this error? I see a tnsnames.ora in 2 locations:
{oracle_home}/infra/network/admin
{oracle_home}/portal/network/admin
What is the reason for this error and what needs to be done to fix it.
thanks,
Samit

The services of infrastructure instance must be up before installing Portal or other Middle Tier instances.

EM Configuration issue.

I have installed grid agent on different server. When i ran emctl status agent i am getting below error.
EM Configuration issue. /u01/app/oracle/product/10g/hostname.com_ORCL.
OS is AIX
Thanks in advance...

I am in AGENT_HOME.You are under Agent installation that's one thing. You also need to make sure your environment variable ORACLE_HOME point to AGENT_HOME not the database installation.

Portal Configuration Issue

Similar Messages

Maybe you are looking for