Portal request object.

Hi:
I wanna use IPortalComponentRequest class to get values from portal but I cann't find the required libraries for the same.
Any ideas?
Thanks,
PKK.

Hi Praveen,
Let me warn you that this might not be a right solution.
But I will take you till where I reached..
To refer a DC in another DC, it is not enough to make a library reference..
Please find the below help path in the NW'04 documentation..
Web Dynpro->The Development Process->Setting Up a Web Dynpro Project->Developing in the Team
After creating a DC and defining a proper usage for it in the second DC project deploy them in order..
By this you won't get the NoClassDefFoundError. But you will get a "ClassCastException"..
So As I suggested in my previous mail, it is better to use "HttpServletRequest" type casting instead of "IPortalComponentRequest"
Or else give a try to run the app in EP6.0 SP3...
Thanks and Regards,
Sam Mathew

Similar Messages

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I get to the request object in a webflow.

How do I get to the request object in a webflow.
I created a input process and one function it needs to do is create a cookie.
Problem is I don't have a response object.
How do I create/get the response object so I can create a cookie.
Thanks
Michael C Ford
------------------ Code Line ------------------------------------
public Object process(HttpServletRequest req, Object requestContext)
throws ProcessingException
// get the pipeline and namespace info for the process
PipelineSession pSession = null;
String namespace = null;
String username = req.getRemoteUser();
pSession = getPipelineSession(req);
namespace = getCurrentNamespace(pSession);
/* ***** DO THE INITIAL CREATE OF THE BEAN *** */
 try {
 Properties props = new Properties();
 props.put(
 Context.INITIAL_CONTEXT_FACTORY,
 "weblogic.jndi.WLInitialContextFactory");
 Context ctx = new InitialContext(props);
 Object homeObject = ctx.lookup("com.??.??PortalMgr");
 SeechangePortalMgrHome seechangePortalMgrHome =
 (SeechangePortalMgrHome) javax.rmi.PortableRemoteObject.narrow(
 homeObject,
 SeechangePortalMgrHome.class);
 SeechangePortalMgr portalMgr = seechangePortalMgrHome.create();
/* Set the initail user */
portalMgr.setUser(username);
 UserRuntime userRuntime = (UserRuntime)portalMgr.getRuntimeObject();
 System.out.print("Run Time User is " + userRuntime.getUserName());
 System.out.print("Run Time User is " + userRuntime.getOrgSeq());
// ** cookies for Actuate XXX=(customer sequence ID), YYY=ZZZ is a dummy per
their requirement
 Cookie cCustSeqNumber = new Cookie("XXX",userRuntime.getOrgSeq());
 Cookie cPassword = new Cookie("YYY","ZZZ");
 cCustSeqNumber.setPath("/");
 cPassword.setPath("/");
 ??response.addCookie(cCustSeqNumber);
 ??response.addCookie(cPassword);
 } catch (Exception ee) {
 System.out.print("Unable to create Portal Manager" + ee);
// at this point we add the logic to produce the bean
return "success";

Thanks
Just what I needed, except I needed to caste response.
Michael C
"Daniel Selman" <[email protected]> wrote:
Michael,
// get the HttpServletResponse from the HttpServletRequest
HttpServletResponse response =
equest.getAttribute( WebflowConstants.HTTP_SERVLET_RESPONSE );
Cookie cPassword = new Cookie("YYY","ZZZ");
cCustSeqNumber.setPath("/");
cPassword.setPath("/");
response.addCookie(cCustSeqNumber);
response.addCookie(cPassword);
You HAVE the HttpServletRequest...
public Object process(HttpServletRequest req, ObjectrequestContext)
throws ProcessingExceptionMake sense?
Dan
"michael C Ford" <[email protected]> wrote in message
news:[email protected]...
How can I get to the response this way ?
this just stored the response as an attribute did it now ?
If I don't have it, how can I use it in a setAttribute ?
Sorry just a little slow
I can't do this can I ?
request.setAttribute(WebflowConstants.HTTP_SERVLET_RESPONSE,response);
Cookie cPassword = new Cookie("YYY","ZZZ");
cCustSeqNumber.setPath("/");
cPassword.setPath("/");
response.addCookie(cCustSeqNumber);
response.addCookie(cPassword);
"Daniel Selman" <[email protected]> wrote:
Michael,
I found this handy snippet in our code:
// Put the httpServletResponse into the request, this is done
in
case IPs want to
// use the response to deposit cookies. The IPs maynot howeverwrite
// anything to the response as this will cause an
IllegalStateException
request.setAttribute(WebflowConstants.HTTP_SERVLET_RESPONSE,
response);
So, the HttpServletResponse is bound into the HttpServletRequest usingthe
key, WebflowConstants.HTTP_SERVLET_RESPONSE.
Magic!
Sincerely,
Daniel Selman
"michael C Ford" <[email protected]> wrote in message
news:[email protected]...
How do I get to the request object in a webflow.
I created a input process and one function it needs to do is create
a
cookie.
Problem is I don't have a response object.
How do I create/get the response object so I can create a cookie.
Thanks
Michael C Ford
------------------ Code Line ------------------------------------
public Object process(HttpServletRequest req, Object
requestContext)
throws ProcessingException
// get the pipeline and namespace info for the process
PipelineSession pSession = null;
String namespace = null;
String username = req.getRemoteUser();
pSession = getPipelineSession(req);
namespace = getCurrentNamespace(pSession);
/* ***** DO THE INITIAL CREATE OF THE BEAN *** */
try {
Properties props = new Properties();
props.put(
Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
Context ctx = new InitialContext(props);
Object homeObject = ctx.lookup("com.??.??PortalMgr");
SeechangePortalMgrHome seechangePortalMgrHome =
(SeechangePortalMgrHome) javax.rmi.PortableRemoteObject.narrow(
homeObject,
SeechangePortalMgrHome.class);
SeechangePortalMgr portalMgr = seechangePortalMgrHome.create();
/* Set the initail user */
portalMgr.setUser(username);
UserRuntime userRuntime = (UserRuntime)portalMgr.getRuntimeObject();
System.out.print("Run Time User is " + userRuntime.getUserName());
System.out.print("Run Time User is " + userRuntime.getOrgSeq());
// ** cookies for Actuate XXX=(customer sequence ID), YYY=ZZZ isa
dummy per
their requirement
Cookie cCustSeqNumber = new
Cookie("XXX",userRuntime.getOrgSeq());
Cookie cPassword = new Cookie("YYY","ZZZ");
cCustSeqNumber.setPath("/");
cPassword.setPath("/");
??response.addCookie(cCustSeqNumber);
??response.addCookie(cPassword);
} catch (Exception ee) {
System.out.print("Unable to create Portal Manager" + ee);
// at this point we add the logic to produce the bean
return "success";

Getting the Request Object in the EJB published as a Web Service

Hi experts,
I have a Portal Service that call a BAPI in a back-end system with the Connector Framework. I have a Portal Component that calls the Portal Service, passing the Locale (request.getLocale()) and the User (request.getUser()) object. It's work fine!
I need to call the Portal Service by an EJB that is published as a Web Service. The connection between the EJB and Portal Service is ok, but I don't know how to get the Locale and the User object in the EJB to pass to the Portal Service.
Is possible to get the request object from the HTTP SOAP Request?
Thanks,
Gustavo

Hey Alice!
The Feature Hashing module is actually a wrapper around
Vowpal Wabbit's implementation of the murmurhash. Thus, it takes text in, and produces 2^N new features based on the text, where N is the bitsize specified in the module. These features (and not the original text!) should be used during model training.
The Learner will then keep track of these features behind the scenes.
When you publish your web service and these features are recomputed for new input text (same N), they are used as the features for scoring.
Does that make sense?
Regards,
AK

How to get Request object and LDAP user

Hi All,
How to get Request object, coz i want to see the out put of this code
IUser myUser = request.getUser();
String uid=myUser.getUid();
I want to get only LDAP user from the server, for that i am having code but i think this code is returning me all user from the server.
com.sap.security.api.IUser user = null;
try {
      IUserFactory userFactory = UMFactory.getUserFactory();
     IUserSearchFilter searchFilter = userFactory.getUserSearchFilter();
ISearchResult searchResult = userFactory.searchUsers(searchFilter);
   int count = 0;
    List list = new ArrayList();
     while (searchResult.hasNext()) {
                  count++;
                   String uniqueid = (String) searchResult.next();
                    user = userFactory.getUser(uniqueid);
                    list.add(user.getUniqueName());
This code is giving me all user from the server LDAP and as well as portal user.
But i want only LDAP.
Please help me out. It's urgent.
Regards,
Deepak

Hi
use the following code
//Request
IWDRequest = WDProtocolAdapter.getProtocolAdapter().getRequestObject();
//User
IWDClientUser = WDClientUser.getCurrentUser();
Regards
Ayyapparaj

How to handle data in a request object

I want to know the best way to handle data received from sql query to display on a jsp page and for page navigation. If I store data in a request object then the data is lost after displaying first page. When user hits Next link to view more data I need to do another query to database which I want to avoid. I display only 20 rows at a time. So if my query returns 100 rows I display 5 pages. I need to retain data when user hits next to view other pages. What is the best way to handle this?
- Raj

By caching your resultset. There are caching custom tags that perform this function. Check out http://www.servletsuite.com/jsp.htm.

How to call request object of IPortalComponent in KM Scheduler application

Hi
We are reading RFC Table data using JCO Connection Pool(JCOClientPoolEntry. Please find the below teo line code.If we put this code in KM Scheduler application then its throwing error for the request objecct of IPortalComponenetRequest.
IJCOClientPoolEntry jcoPoolEntry = null;
jcoPoolEntry = clientService.getJCOClientPoolEntry(sysId, request);
Can you please let me know how to use request object of IPortalComponent in KM Scheduler application?
Thanks,
Susmita

Hello GopalY,
In my experience its not possible to call OLE object in Webui. Maybe customer 3 party application will be supply some web service to handle credit card payments. I think this is the simple way to access 3party application.
Regards,
Zafer,

Getting value of parameter from request object

If i submit a form using button element of html form then i dont get name of the button element as Parameter of request object and hence its value.
why and how?
Thanks in advance

what do you mean submit a form with a button? You don't submit a form with a button, you submit it with a submit element. Unless you use Javascript to submit from an onclick handler in the button. In which case, you aren't submitting from the button, but from the script. I'm not sure that buttons are sent in forms. Why would they? If you are using buttons and Javascript, then you could use a hidden field and set it's value to the button's value when it's clicked before submitting the form.

Clearing variable from Request object

Hi everyone,
After getting value from request.getParameter("var"), I want to clear this "var" variable from request scope. So that in the next coming statements if i again call the same request.getParameter("var") statement than it must return null
So how to handle this issue of clearing certain variable from request scope or flushing the whole request object

I don't know what you are trying to do but it sounds confused. I would suggest you read the parameter once, at the beginning of the code. Store it in a variable and use that variable as necessary. If you still need help then would you explain what you are trying to achieve here.

Polish characters are not retrived from request object

Hi
I have a problem in passing POLISH character through request object.
I am calling a servlet from a jsp with a hyper link. when the link in jsp is clicked the following code will be executed
response.sendRedirect(response.encodeURL("http://hostname:8080/appName/abc.do?method=getReport&FirstName=Ko�tun&LastName=Pro�ciak"));
this code is passing two POLISH strings First Name & Last Name to the servlet.
In the servlet i am trying to retrieve the values of the parameters "FirstName" & "LastName".
Sring FN=request.getParameter("FirstName");
String LN=request.getParameter("LastName");
The variable FN & LN doesn't show the POLISH character in servlet.
I tried with the below option in JSP
<meta content="text/html; charset=ISO-8859-2" > (or)
<meta content="text/html; charset=UTF-8" >
(or)
<%@ page contentType="text/html;charset=ISO8859_2" %>
(or)
<%@ page contentType="text/html;charset=UTF-8" %>
In Servlet i tried using
request.setCharacterEncoding("ISO-8859-2");
(or)
request.setCharacterEncoding("UTF-8");
Pl help me.
Thanks in advance

Don't do it then. Those characters are not allowed inside a URL and have to be encoded. You know, that %... stuff.

Creating Activity object for a Service Request object...

[This thread was migrated from the On Demand Developer Forum in the old Siebel Community] 
drangineni
New Contributor
Ho do we use Activity object of a Service Request object. I am trying to
create an Activity object for a existing Service Request object.
I am looking for some sample code.
I greatly appreciate your help.
Product: CRM OnDemand
11-26-2006 12:40 PM
Re: Creating Activity object for a Service Request object...
BigSlick
Valued Contributor
drangineni, What programming language are you using?
BS
12-04-2006 10:56 AM
Re: Creating Activity object for a Service Request object...
drangineni
New Contributor
Hi, I am using C# .
12-04-2006 07:40 PM
Re: Creating Activity object for a Service Request object...
BigSlick
Valued Contributor
drangineni, assuming you know the service requestid or externalId of the
Sr you are dealin gwith you would first set that value.
ServiceRequest1[] objSRList =new ServiceRequest1[1];
objSRList[0] = new ServiceRequest1();
objSRList[0].ServiceRequestId = <YourSRId>;
Then you create an array of activities and initialize the first one:
objSRList[0].ListOfActivity = new Activity[1];
objSRList[0].ListOfActivity[0] = new Activity();
Now set the data fields
objSRList[0].ListOfActivity[0].Subject ="My Subject";
objSRList[0].ListOfActivity[0].Description ="My Description";
objSRList[0].ListOfActivity[0].Display = "Task"; //valid values are either
"Task" or "Appointment"
Then call the ServiceREquestInsertOrUpdate method on the ServiceRequest
WebService and pass in the above variable.
BS
12-06-2006 12:36 PM
Re: Creating Activity object for a Service Request object...
drangineni
New Contributor
Thank you BigSlick.
The following error is thrown when I use the
ServiceRequestInsertOrUpdate(objInput)
"No user key can be used for the Integration Component instance 'Service 
Request_Action'.(SBL-EAI-04397)"
When I use the prxySrvcRequest.ServiceRequestInsert(objInput), no error is
thrown and the Activity gets added, but a new Service Request object is
created, but the Activity gets added to an existing Service Request
object. I greatly appreciate your help.
The following is the code:
int ActivityLength = 0;
WSOD_ServiceRequest.ServiceRequest1[] ServiceRequest = new
WSOD_ServiceRequest.ServiceRequest1[1];
ServiceRequest[0] = new WSOD_ServiceRequest.ServiceRequest1();
ServiceRequest[0].ServiceRequestId = this.Request.QueryString["id"];
ServiceRequest[0].ListOfActivity = new
WebSelfService.WSOD_ServiceRequest.Activity[ActivityLength + 1];
ServiceRequest[0].ListOfActivity[0] = new WSOD_ServiceRequest.Activity();
ServiceRequest[0].ListOfActivity[ActivityLength].Description =
this.txtDescription.Text;
ServiceRequest[0].ListOfActivity[ActivityLength].Display = "Task";
ServiceRequest[0].ListOfActivity[ActivityLength].Subject = "My Subject";
WSOD_ServiceRequest.ServiceRequest prxySrvcRequest = new
WebSelfService.WSOD_ServiceRequest.ServiceRequest();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input
objInput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output
objOutput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output();
objInput.ListOfServiceRequest = ServiceRequest;
Session objSession;
objSession = (Session) Application["Session"];
prxySrvcRequest.Url = objSession.GetURL();
try
objOutput = prxySrvcRequest.ServiceRequestInsertOrUpdate(objInput);
catch(Exception e)
12-09-2006 09:53 AM
Re: Creating Activity object for a Service Request object...
drangineni
New Contributor
Thank you BigSlick.
The following error is thrown when I use the
ServiceRequestInsertOrUpdate(objInput)
"No user key can be used for the Integration Component instance 'Service 
Request_Action'.(SBL-EAI-04397)"
When I use the prxySrvcRequest.ServiceRequestInsert(objInput), no error is
thrown and the Activity gets added, but a new Service Request object is
created, but the Activity gets added to an existing Service Request
object. I greatly appreciate your help.
The following is the code:
int ActivityLength = 0;
WSOD_ServiceRequest.ServiceRequest1[] ServiceRequest = new
WSOD_ServiceRequest.ServiceRequest1[1];
ServiceRequest[0] = new WSOD_ServiceRequest.ServiceRequest1();
ServiceRequest[0].ServiceRequestId = this.Request.QueryString["id"];
ServiceRequest[0].ListOfActivity = new
WebSelfService.WSOD_ServiceRequest.Activity[ActivityLength + 1];
ServiceRequest[0].ListOfActivity[0] = new WSOD_ServiceRequest.Activity();
ServiceRequest[0].ListOfActivity[ActivityLength].Description =
this.txtDescription.Text;
ServiceRequest[0].ListOfActivity[ActivityLength].Display = "Task";
ServiceRequest[0].ListOfActivity[ActivityLength].Subject = "My Subject";
WSOD_ServiceRequest.ServiceRequest prxySrvcRequest = new
WebSelfService.WSOD_ServiceRequest.ServiceRequest();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input
objInput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output
objOutput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output();
objInput.ListOfServiceRequest = ServiceRequest;
Session objSession;
objSession = (Session) Application["Session"];
prxySrvcRequest.Url = objSession.GetURL();
try
objOutput = prxySrvcRequest.ServiceRequestInsertOrUpdate(objInput);
catch(Exception e)
12-10-2006 08:49 AM
Re: Creating Activity object for a Service Request object...
BigSlick
Valued Contributor
Ah yes, I forgot you also need to specify a unquie Id for the activity.
It's kinda strange.
Try adding this:
ServiceRequest[0].ListOfActivity[ActivityLength].ActivityId = "DummyId";
//OD will overwrite this with a real Id
Or if you have a unquie ID for your Activities you can use:
ServiceRequest[0].ListOfActivity[ActivityLength].ExternalSystemId = <Your
Unique Value>;
Hope that helps,
BS
12-11-2006 10:52 AM
Re: Creating Activity object for a Service Request object...
surgientweb
New Contributor
Hi all,
I have a similar problem, but mine is returning a message that field
"Display" is required. Looking at this post and the documentation it is
obvious that Display is a required field, but my WSDL did not include a
field called "Display", so my proxy did not generate one.
I tried adding a field called Display to the WSDL and the proxy class, but
I get a different error... I figure I maybe cannot add it manually like
that - but I think the bigger problem is it is not part of the WSDL that
Siebel OD generates for me in my admin account.
On top of that Display is not shown in the list of fields for Activity
through the admin interface.. is it possible my account is bugged? Am I
missing something simple here? BigSlick, I see you mention a .Display in
your code sample so I thought you might understand what is wrong. Here is
my code (I am trying to add a activity to a lead).
Thanks for any insight into this!
private void InsertLeadActivity(Session session, NameValueCollection data,
string leadID)
try
if (blnDebug)
Response.Write("Setting up Activity ";
// instantiate the proxy service
Activity_Service.Activity activityProxy = new Activity_Service.Activity();
// set up the target URL
activityProxy.Url = session.GetURL();
activityProxy.CookieContainer = session.GetCookieContainer();
// set up input argument
ActivityNWS_Activity_Insert_Input input = new
ActivityNWS_Activity_Insert_Input();
input.ListOfActivity = new Activity1[1];
input.ListOfActivity[0] = new Activity1();
if (blnDebug)
Response.Write("Getting Data ";
// dg note: name value
// input.ListOfActivity[0].MrMrs = data["MrMrs"];
input.ListOfActivity[0].LeadId = leadID.ToString();
input.ListOfActivity[0].Description = DataToString(data);
input.ListOfActivity[0].Subject = "Website Submission Activity";
input.ListOfActivity[0].Priority = "3-Low";
//input.ListOfActivity[0].DueDate =
DateTime.Now.AddDays(7).ToShortDateString();
input.ListOfActivity[0].Owner = this.defaultLeadOwner;
input.ListOfActivity[0].Type = "Call";
//input.ListOfActivity[0].Display = "Task";
input.ListOfActivity[0].ActivityId = "DummyId";
input.ListOfActivity[0].ExternalSystemId = "web";
activityProxy.Activity_Insert(input);
catch (Exception exInsertActivity1)
if (blnDebug)
Response.Write(" Error inserting activity. " +
exInsertActivity1.ToString() + " ";
01-06-2007 05:05 PM
Re: Creating Activity object for a Service Request object...
surgientweb
New Contributor
Figured it out.. the field "Display" is also known as "Activity"........
Here are some notes for other people.. good luck and feel free to write me
at raskawa-at-gmail-com if you want a code sample.
Some unpublished nice to knows for Siebel On Demand Activities....
In summary:
- .Activity is also known as Display in documentation and on the error
messages coming back from the WS. Also, it appears based on these boards
some people actually have a .Display field. Maybe different accounts
generate different WSDL's.... buggy.
- If a error message is thrown saying "Description is required" it really
means "Subject is required" (make sure .Subject has a value)
- If a error message is thrown complaining that ActionType is not right..
that is really .Type.. make sure it's lookup value is valid for the
dropdown values in your CRM OD system.
My code/values that worked..
input.ListOfActivity[0].LeadId = leadID.ToString();
input.ListOfActivity[0].Description = DataToString(data);
input.ListOfActivity[0].Subject = "Website Submission Activity";
input.ListOfActivity[0].Priority = "3-Low";
//input.ListOfActivity[0].DueDate =
DateTime.Now.AddDays(7).ToShortDateString();
input.ListOfActivity[0].Owner = this.defaultLeadOwner;
input.ListOfActivity[0].Type = "Call";
input.ListOfActivity[0].ActivityId = "DummyId";
input.ListOfActivity[0].ExternalSystemId = "web";
//input.ListOfActivity[0].Display = "Task"; //doesn't work
input.ListOfActivity[0].Activity = "Task"; //does work.
01-06-2007 05:17 PM
Re: Creating Activity object for a Service Request object...
raskawa
First Time Contributor
Hi,
This is surgientweb (under my own login now..)
Anyway, I wanted to add that I figured out that there are two ways to add
a Activity to a Lead. Via the Lead object (by getting a ListOfActivities)
OR by creating a Activity directly and just adding your "LeadID" to it (or
you can also add a "ContactID" to relate the activity to a Contact.)
Feel free to email me for a code example (raskawa....at....gmail)
-David
01-09-2007 02:58 PM

Hi Stephane,
You can definitely read the categories using Tables in CRM. The logic is a bit complicated though.
Use the following steps to retrieve Categories using Std. CRM Tables:
1. Pass transaction GUID in field GUID of table CRMV_REPORT_SUBJ and get KATALOGART, CODEGRUPPE and CODE field values in lv_catalog, lv_codegrp and lv_code.
2. Now you need to concatenate these 3 fields values carefully like this:
CONCATENATE lv_catelog lv_codegrp ' ' lv_code into lv_category1.
Remember there are 4 spaces between lv_codegrp and lv_code.
3. Now pass this lv_category1 in field OBJEXT in table CRMC_ERMS_CAT_OK and get OBJGUID in field lv_objguid.
4. Pass this lv_objguid in field OBJ_GUID and LNK_TYPE = 'IS_CODE' in table CRMC_ERMS_CAT_LN and get value of CAT_GUID in lv_cat_guid.
5. Pass this lv_cat_guid in field CAT_GUID in table CRMC_ERMS_CAT_CA and get value of CAT_ID in field lv_cat_text.
Remember this lv_cat_text is the text value of your last level of category of transaction.
6. To get its upper cateogry level value, simply use table CRMC_ERMS_CAT_HI and get parent guid value and pass this as CAT_GUID again in table CRMC_ERMS_CAT_CA to get its text.
Alternatively, you can also use class method cl_crm_ml_category_util=>get_parse_all to get all levels of categories.
Hope this helps.
Thanks
Vishal

Error while retrieving data in VC model Portal Request Failed

Hello,
I'm trying to use a ES workplace Webservice but not getting any results. The error message is Portal Request Failed ( Index: 0 , Size: 0). I tested calling the service from the esworkplace and it worked. Although I hade to use some NULL value as variables. Is it also possible to give a null value along while testing the webservice from VC ?
I'm on release 7.0 sp08. The service I call is on HU2 800 , service is MaterialSimpleByIDAndDescriptionQueryResponse_In.
If any one knows a solution for this problem i like to hear from you.
Regards,
Jasper

Hi Jasper,
Have you followed the steps mentioned in this document?- > https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a160392c-0e01-0010-7784-9cc564d871d2
and optionally
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5e9ca25b-0e01-0010-bbaa-f3b963e89edd
If not, these How-to documents will solve your problem
With Best Regards,
Swapnil

Getting error while passing implicit request object from JSP to JavaBean

Hi,
I am getting error while passing implicit object ie( request object)
from within JSP to JavaBean.
Following is source for JSP, JavaBean and Error message I am getting.
vaLookup.jsp Source
<jsp:useBean id="db" class="advisorinsight.javabeans.DisplayPages"
scope="request">
<jsp:setProperty name="db" property="request" value="<%= request %>"
/>
</jsp:useBean>
<jsp:getProperty name="db" property="totalrecords" />
JAVABEAN DisplayPages.java source
package javabeans;
import java.io.Serializable;
import javax.servlet.http.HttpServletRequest;
public final class DisplayPages implements Serializable {
private String totalrecords;
private HttpServletRequest request;
public void setRequest(HttpServletRequest req){
this.request = req;
public java.lang.String getTotalrecords()
this.totalrecords =
this.request.getParameter("totalrecords");
return this.totalrecords;
public DisplayPages(){
totalrecords = "";
request = null;
error after executing vaLookup.jsp
[30/Nov/2001 11:56:04:5] info: EXTMGR-006: GXExtensionManager: Extension
service JavaExtData successfully loaded
[30/Nov/2001 11:56:04:5] info: EXTMGR-006: GXExtensionManager: Extension
service LockManager successfully loaded
[30/Nov/2001 11:56:04:5] info: EXTMGR-006: GXExtensionManager: Extension
service RLOPManager successfully loaded
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:7] info: ENGINE-ready: ready: 10819
[30/Nov/2001 11:56:46:0] info: --------------------------------------
[30/Nov/2001 11:56:46:0] info: JSPRunnerSticky: init
[30/Nov/2001 11:56:46:0] info: --------------------------------------
[30/Nov/2001 11:56:51:7] error: Exception: SERVLET-compile_failed:
Failed in compiling template: /va/valookup.jsp, javac error:
c:\iplanet\ias6\ias\APPS\variabl
S\va\valookup.java:76: Undefined variable: JSP_8
db.setRequest(_JSP__8);
^
1 error
Exception Stack Trace:
java.lang.Exception: javac error:
c:\iplanet\ias6\ias\APPS\variableannuity\va\WEB-INF\compiled_jsp\jsp\APPS\va\valookup.java:76:
Undefined variable: JSP_8
db.setRequest(_JSP__8);
^
1 error
at
com.netscape.server.servlet.jsp.JSPCompiler.compileJSP(Unknown Source)
at
com.netscape.server.servlet.jsp.JSPCompiler.compileOrLoadJSP(Unknown
Source)
at
com.netscape.server.servlet.jsp.JSPCompiler.compileInstance(Unknown
Source)
at
com.netscape.server.servlet.jsp.JSPCompiler.compileInstance(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformHttpServletResponse.callJspCompiler(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformHttpServletResponse.callUri(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformHttpServletResponse.callUriRestrictOutput(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformRequestDispatcher.forward(Unknown
Source)
at com.netscape.server.servlet.jsp.JSPRunner.service(Unknown
Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown
Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)

The only thing that I see that looks funny to me is when you pass the request object into the method using <%=request%>, Im not sure whats going to happen here because that is suppose to print the results. Have you tried simply using <%request%>?

Setting the header in http request object

I am facing a problem while trying to test a particular flow of my application.The details are given below:
The controller servlet of my main application reads the header "Referer" from the request object and then based on this it forwards the request to appropriate servlets.For testing my application I am writing a test servlet which receives a request object from a test jsp and sets all the necessary attributes in the request object and passes this request object to the doGet () method of the main application's controller servlet. But while trying with this I find that the main controller fails to forward to the correct servlet because it receives incorrect referer information. So my question is how can I set my customised "Referer" in the header of the http request so that the application's controller servlet forwards to the correct servlet?Is there any means to set the request header in servlet or jsp?

As far as I know you can't change the request in a servlet or .jsp, but you can in a Filter. Wrap the original request object in a wrapper class before passing it to chain.doFilter().

The requested object is locked by another transaction

Hi All,
I got a problem while loading data from an ODS to another ODS, it shows 450 records but request is red, it says
'The requested object is locked by another transaction'
Message no. MC602
Diagnosis
A lock requested by calling an ENQUEUE function module cannot be provided because the object in question has already been locked by its own transaction.
Technical Information: The C_ENQUEUE routine returns the following values:
COLLISION_OBJECT = ERSMONFACT
COLLISION_UNAME = SINGH
System response
The ENQUEUE function module triggers an appropriate exception. If this exception was not intercepted by the application program, it leads automatically to the active SAP transaction being cancelled.
Procedure
Once the ENQUEUE function module is called, the application program should intercept this exception and react to it appropriately.
I tried SM12 but there is no lock entry, can u suggest some thing?
Regards,

Hello,
here your dso seems to be lock as some read and write opertaion is happening at the time u r running the dtp.
Here two things to look :
1.Check the error that ur getting while running a dtp the process monitor etc try to find the request id which has locked the dso . Copy that request id go to t-code RSRQ see whats this request who is user,target etc..contact user for cancelling the job if it has been stuck for long long time. Copy the JOB ID from RSRQ for that rquest go to SM37 give the date as there in RSRQ and kill the job
2.GO to SM12 try to search the object there and remove the lock.
Thanks,
Deepak

Portal request object.

Similar Messages

Maybe you are looking for