Portal Server Admin Console login problem....

When I installed Sun Java Studio Enterprise 7 (trial edition) I also installed the server package (The second zip file). During the install I was only prompted to enter ID and password my Application server. But I do not know or have an ID and password for the portal server. When I launch the Portal Server Admin Console which is really the Access Manager's Admin console, it prompts me to enter my ID and password. The ID and password I have setup for the Application server does not work. Now my problem is, I cannot access the portal server on my machine. Does any one know how I can find out what my ID and password is? or how I can access the portal server?

hi,
I'm a newbie , who has just installed the java enterprise server. i installed it on windows platform and installation was successful. I don't know how to login to the portal server.
please provide the address of the portal webpage if the one given below is incorrect:
http://localhost:8080/portal/dt
which username and password can i use for loggin in ? .....
what is the default username and password ?
is the username amadmin ?? if so what is the password ? ...
kindly help me .....thanks in advance.... :)

Similar Messages

Application Server - Admin Console Login Problem

Hi,
I have installed J2EE 1.4 (Sun Java Application Server Platform Edition 8) on Windows 2000.
Installation was successful and the app server is getting started too.
When i am going to http://localhost:4848/asadmin (Admin Console) and enter user/password to login ..
It complains:
HTTP Status 400 - Invalid direct reference to form login page
type Status report
message Invalid direct reference to form login page
description The request sent by the client was syntactically incorrect (Invalid direct reference to form login page).
I could not find much on this in the troubleshooting guide or other documents too.
Did anyone else face this issue and if you know the reason/workaround, Pls suggest.
Thanks in Advance.
Anwar

Hey anwarak, I am having the exact problem again as well. I had this same issue on the previous release of j2ee and for a short time I had it working. I lost that functionality when I lost my disk drive to a (s.m.a.r.t.) type of error. I am now in the rebuilding system phase and thought the issue might be resolved in this release. My initial resolution that was suggested here was to turn off my firewall.
I am running Win-XP SP1 and I also have Norton2002 and ZoneAlarm Pro 4.5.538.001 on my system. I have attempted to allow ZoneAlarm to ease restrictions for cookies and ad blockers, just in case but to no avail! I found the following log at C:\Sun\AppServer\domains\domain1\logs\access on my system:
127.0.0.1 - - [01/Apr/2004:20:49:19 -0600] "GET /asadmin/index.html HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:19 -0600] "GET /asadmin/admingui/TopFrameset HTTP/1.1" 200 533
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/css/css_ns6up.css HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /asadmin/jsp/login.jsp HTTP/1.1" 200 6862
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/other/dot.gif HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/login/login_background.jpg HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /asadmin/images/productname.gif HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/login/login_sun_logo.gif HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:30 -0600] "POST /asadmin/jsp/j_security_check HTTP/1.1" 400 1099
The post line is the most curious one of all! I am not sure what the result codes are, or where to find a definition of them. I am still digging for that.
I am also looking for the answer!

Application Server Admin Console Login

I like to know the default username and password of the Application Server Admin Console. (Server Navigator>Show Admin Console).
At the end of the installation of JSC this login details are displayed but now I have forgotten. Please anyone help me.
Thank you very much.

Try "admin" and "adminadmin".

Appl Server Admin Console: Login Failed

Hi,
I am forget my username and password when i installed J2EE appl server. I would like to reset them to new values in order to get in into the admin console. How can reset my login info? Can anyone help?
Thank you
Latha

You could try this:
http://java.sun.com/j2ee/1.4/docs/relnotes/troubleshooting.html#1026910
Or reinstall the appserver.

Admin Console browser problem

Hi,
This is a peculiar problem that I am facing. I am working with iPS3.0SP3 on solaris8. My installation went fine. But when I try to access Admin console(thru Netscape 4.7 or 4.75), I have the login screen displayed. But, after I provide User and Password and hit Submit button, the browser window vanishes. This has been happening with SP2 also. And my login to the portal desktop screen is successful. My browser window is available. The problem is only with the Admin Console.
Now when I tried to Login to the same portal server instance's Admin Console thru the local Web Browser on a different machine, its working fine. I mean, the windows doesnt close.
Any guess on what could be the problem.
Thanks & Regards.
shivaram.

Hi there Shivaram,
I have found a similar problem, when using iPS. If you have logged into the portal desktop and then wan't to log into the admin console, the admin console seems to fail when logging in. What I have found, is that after you logout of the desktop, and then go to the console login, it helps to just click the reload button in netscape, while on the admin console login screen. It seems that you need to clear the session cookie first, otherwise admin authentication fails. Alternatively you can start a seperate instance of Netscape from the command line, which then forces Netscape to create an alternative temporary store, and lock files. I'm not sure wheteher this will help, but this is what I have seend before.... comments welcome..

Missing tabs from WebLogic Server Admin console

I am extremely new to WebLogic. It came with a vendor package we bought, and we do not have support. I have been using ASK to search for answers to my questions/problems. It has become obvious that either I don't know what I am doing :-) or that our installation is less robust than other peoples.
On our Weblogic Server Admin console, there is no such thing as a "Change Center". If I go to Services -> JDBC -> Connection Pools, there is no tab for Testing. The only tabs I have are Configuration and Monitoring. Monitoring only has text on it - no button to push. Do I always have to "configure a new JDBC connection pool" in order to somehow find a TEST tab?
Have we done something wrong during installation? Thank you, anyone, for help and advice.
Bonnie

Can you please share the error logs/standard output snippet here. It seems to be an issue with the classpath that the system classloader is reading.
Cheers!!
AJ

Help with connection pool at system application server admin console 9.0

Hi,
I am trying to create a pool of oracle connections in system application server admin console, but when I ping to the server, it shows me the error: invalid oracle URL: OracleDataSource.makeURL.
I have the jar file of the driver referenced in the classpath suffix field of the path settings.
I have added all kind of combinations of additional properties, like
serverName: 172.16.9.162
databaseName: oradex07
portNumber: 1521
username: usr
password: pwd
or
url: jdbc:oracle:thin:@172.16.9.162:1521:oradex07
but it still showing me the same error

Hey, I use this code to lookup session bean deployed in glassfish.
Based on the glassfish EJB FAQ.
Properties props = new Properties();
props.setProperty("java.naming.factory.initial", "com.sun.enterprise.naming.SerialInitContextFactory");
props.setProperty("java.naming.factory.url.pkgs", "com.sun.enterprise.naming");
props.setProperty("java.naming.factory.state", "com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl");
props.setProperty("org.omg.CORBA.ORBInitialHost", "localhost");
props.setProperty("org.omg.CORBA.ORBInitialPort", "3700");
InitialContext initialContext = new InitialContext(props);
SessionBean bean = initialContext.lookup(ejbName);Cheers.

Can't login to Messaging Server Admin Console

I've just installed DS5.2 and MSG5.2 on a 480R. After starting all the appropriate servers I am able to use the Admin Consoles on the 480R for both DS and MSG.
But if I try to login to the MSG server's admin console remotely from my Win XP laptop I get an error "Cannot logon because of an incorrect user id, incorrect password or directory problem. I'm using the same settings (ports, user id cn=Directory Manager, password) as i did on the 480R. I even tried Sun ONE 5.2 admin console as well as the older Netscape 4.5 console. I don't have a problem when logging into the DS5.2 admin server via the console on my WinXP laptop.
Any ideas ?

Never mind. I hope the problem.
The admin server was configured to only allow connections to it from the local machine. I added my laptop's IP to the allowed hosts and everything's working just fine now.
Thanks anyways.

IPlanet Portal Server admin page problem

the orginal value of "Default Client Type" is "generic HTML" and after i hv updated it as "WML", I cant reach the admin page again.. can anyone show me how to change it back to its orginal value?

Hi there,
You could try exporting the current iwtClient configuration from the command line ie. : "/opt/SUNWips/bin/ipsadmin get component iwtClient > iwtClient.xml" once exported edit the file iwtClient.xml and look for : <iwt:Att name="iwtClient-clientTypes" ..
find the <Val></Val> tags and put the following line into it : "clientType=genericHTML|contentType=text/html|genericHTML=true|cookieSupport=true|fileIdentifier=html|filePath=html"
Save the file and import it again with "/opt/SUNWips/bin/ipsadmin change component iwtClient iwtClient.xml" note this command uses no director "< or >" . Restart the portal server and try it again.
Hope this helps
Regards

Directory Server Admin Console "disappears" after logging in

Hi,
We are just starting to work with Directory Server 6.1, on RedHat 4. I access the server on which Directory Server is running via X. However, when I try to access the Admin Console and after logging in, the main Admin Console panel appears very briefly, and then everything, including the xterm window that I started with, disappears.
I've tried restarting both the slapd (slapd-xxx) and admin console (start-admin), but the same thing keeps happening.
This is the first time that I'm working with 6.1, but do I need to login/start the Admin Console a different way than before when using X?
Thanks,
Jim

Hi,
No one has responded to this thread, but for the record, one of my colleagues got it working today, and I hope that this info might help someone else someday...
I had neglected (sorry) to mention that we're in an environment where we can't run directly as root, but instead have to use sudo.
What I was doing earlier was ssh'ing to the server, then doing a "sudo bash", doing the "export DISPLAY=...", then running the startconsole to startup the Sun DS console.
So, today, I was fooling around with this with one of the other guys, and instead of doing the "sudo bash", he just did the "export DISPLAY=...", and then just "sudo ./startconsole", and, voila, we got the console GUI and were able to login without it disappearing.
I had not tried that previously, because I had thought that the "export DISPLAY=..." wouldn't have survived the sudo (I'm not that familiar with it), but I guess it does.
I'm not 100% sure what the problem was with doing the "sudo bash", but I believe it had something to do with "who we were logged-in as".
Maybe someone here who's more familiar with sudo, etc. and Cygwin X might be able to provide an explanation.
Jim

Default Administrator Username & Password for Weblogic Server Admin Console

I created a new domain using the configuration wizard on windows (using config.cmd).
While configuring the domain, I didnt check any of the check boxes for configuring Admin Server, Managed servers, clusters...
Just gave the domain name and location of the domain home and clicked on create domain.
So automatically AdminServer is created and domain was created successfully.
After the domain is created, I started the Admin Server from the same configuration Wizard and clicked on Done.
Now the Admin Server is started successfully. But I dont know the Administrator username and password as I didnt configure it while creating the domain.
So how to login to Admin Console? What will be the default Administrator Username and Password to log into Admin Console?

Got the answer.
I tried with weblogic/weblogic9 and it worked.
I m able to login to Admin Console. So this should be the default Username and Password.
Please let me know your thoughts.

GW Mobility Service admin console - logins for non-Admins no longerworks

We recently upgraded from the GW Mobility Pack (Data Synchronizer)
v1.2.5 (299) to the new GW Mobility Service v2.0.1 (53).
Previously, a regular user could login to the Data Synchronizer admin
console and configure their own account settings to determine which
cabinet folders or address books would get synchronized to their mobile
device.
Since our upgrade to the GW Mobility Service, only administrators can
log in to the admin console. Any attempt by a non-admin user to login
to the admin console is met with an "Invalid username/password" error.
Is this by design, or is there something we've missed in our GMS
configuration?
Thanks,
Greg
former e-mail for posting:
[email protected]

On 4/22/2014 11:49 AM, DZanre wrote:> "Greg N." wrote:
>
>> Any attempt by a non-admin user to login to the admin console is met
with an
>> "Invalid username/password" error.
>>
>> Is this by design, or is there something we've missed in our GMS
>> configuration?
>
> If you switched your authentication mode from LDAP to GW, then you
will need to
> login with the GW user/password. Have you tried that? It's quite
possible that
> this is an entirely different password (and in some cases a different
userid).
>
Danita,
Thanks for responding. Unfortunately, the authentication type wasn't
changed during the upgrade. It's still set to LDAP. Both Provisioning
and Authentication under User Source are on LDAP.
I did go ahead and try a GW login anyway, but no luck.
I also checked the base user and group DN's to make sure they are still
set to the correct eDirectory context, and they are.
Any other suggestions?
Thanks,
-Greg
former e-mail for posting:
[email protected]

Admin console login?

I can't access admin console.
It prompts me for a user & password.
During the installation I was prompted for a password but never did it ask
me to enter a user name.
How do I access the console now? Is there a default admin user name?
I'm stuck...help please.

cool...thanks!
I've gone throught the documentation...and all I could find was "to use the
username who started the admin server" which didn't work.
"Jesus M. Salvo Jr." <[email protected]> wrote in message
news:[email protected]..
Username is system
Kenneth Chin wrote:
I can't access admin console.
It prompts me for a user & password.
During the installation I was prompted for a password but never did it
ask
me to enter a user name.
How do I access the console now? Is there a default admin user name?
I'm stuck...help please.

Need to see the domain name displayed at the admin console login page

I used to see the domain name at the console login page until I was running WLS 8.1 SP3.
Now that I have SP5 I am not able to see it anymore, I am curious to know what has caused this error.
If anyone has an answer , please reply .

Hi,
For accessing any application outside domain you need to have Public IP of the server where your you have put your application.
Regards,
Gulrez Alam

How to Modify Weblogic's Admin Console Login?

Hi all,
I am working with Weblogic Server 8.1. I would like to take weblogic's current
administration console ( ../console/LoginForm.jsp) and make some modifications.
Mostly, I would like to access LoginForm.jsp. Where exactly is this file located?
I can find the console.war file, but the LoginForm.jsp is not there. I can't find
the files I need to modify. Where can I find files to modify the administration
console/login?
You help is appreciated, thanks!

Hi Shailesh Dyade,
Try to execute the following script after executing the startup script (startWeblogic.cmd or startWeblogic.sh).
connect("username","password","t3://hostname:portnumber")
edit()
startEdit()
cmo.setConsoleEnabled(true)
save()
activate()
disconnect()
exit()
once execute the above script then restart the server & try to access the console using the URL
Thanks & Regards,
Siva Prasad Reddy
[email protected]
9550887963

Portal Server Admin Console login problem....

Similar Messages

Maybe you are looking for