Portal users monitoring from EP5

Hi,
I am using EP5sp6.Is there any way to get information from portal monitoring that how many users have logged on Portal(EP5) in the last 6 months (by week)?" .
is there any log file to monitor the portal .please provide me the path

You could probably setup http loggin on the http service of the SAP J2EE engine.
-Login to the administration console
-find the http service for an application node and enter it
-In the general tab check enable login and set the path to log
Then you could probably use a tool like http://awstats.sourceforge.net/ to analyse the logs.

Similar Messages

How to access a Portal User Info from a J2EE application?

Hi,
I have deployed a j2ee application in portal and its running fine.
from that application i need to assign some roles to some users.i have the user id.
so my doubt is can i access the portal user info from this j2ee application?i have some servlets in the j2ee application....can i get the portal user info from this servlet?
plz help me
regards,
Visweswar

Hi,
Please check out this to get the portal user information from Java -
WdClientUser class/Interface to aciehve this.
Please check out these links on the same -
WDClientUser.getClientUser IUser
help needed
Regards
Lekha

Extract Portal User Name From HTTP POST Request (WSRP SOAP)

How can we extract the user name from the HTTP POST Request (*WSRP SOAP*) from the Portal to the Portlet Provider (Producer)?
We are load balancing between the Portal (10.1.14.2) and the providers (OC4J 10.1.3.3) and would like to extract the user name within the load balancer so we can create session affinity based on it.
BTW, we already tried using TCP Flow but were unable to see the user name.

From the documentation, it seems that you need to use
HttpURLConnection.setRequestMethod("POST"); // "GET" is the defaultalthough I have seen examples on the web without it.
Try!
Edit: Also the single quotes around userid and password may be a problem.
Use the previous poster suggestion, but do not include the single quotes.
Edited by: baftos on Aug 6, 2008 4:27 PM

Retrive portal user logged from HttpServlet

Hi all,
i've implemented an URL iview containing a Java application. I've to retrive the user logged on portal from the application's servlet contained into url iview.
Please, any idea!?!?!
help me!!!
Andrea

Hi,
Since the servlet is running in a different container I'm not sure there's a clean way.
What about passing in the user id on the url string? http://<myurliview>?myuserid=<user> ?
Your servlet would then have access to this via request.getParameter("myuserid").toString();
The application integrator can take care of parametizing this for you. See here http://help.sap.com/saphelp_nw04/helpdata/en/70/5a3842134bad04e10000000a1550b0/frameset.htm
Hope this helps,
Marty

How to find out portal user from sso cookie ?

Hi,
I want to find out the portal user id from Portal30_sso cookie. It is required for security in my java servlet.
Thanks
Vikas

First of all, you can't get anything from the portal30_sso cookie or the portal30 cookie or the SSO_ID cookie. These are cookies established for (1) The login server session; (2) The Portal session; (3) The login server single sign-on cookie - visible only to the login server.
When you want to know who the current user is, you need to establish the context. If your servlet is standalone and not a partner application to the login server and it's not a portlet, etc., then what context does it have? What concept of users does it have? If you are really asking what Portal is currently logged on, that is still a loaded question. The user's browser could be accessing several portal's at the same time, each with a different identity. What I am getting at is that your servlet needs to somehow be associated with a particular portal before it can even think of asking this question.
The ways to associate your servlet with a portal would be
[list=1]
[*]Make it a partner application
[*]Make it a portlet
[*]Make it an external application
[list]
Hope that helps.

Create portal user using web dynpro abap application

Dear All,
I would like to know is it possible to create portal user-id through web dynpro abap application.
My requirement is
> I have to create a web dynpro abap application. In the web dynpro abap application I have name email-id and phone number as entry fields.
> I will click on submit, one unique id will get created. This unique id will be the login id for portal.
I found how to create portal user using web dynpro java, but i could not find regarding web dynpro abap.
If it is possible to create the portal users using web dynpro abap pls share the code as well.
Regards,
Swapnil Indulkar

Hi swapnil,
I think by using BAPi.. BAPI_USER_CREATE1 you can create.
Please check this...
Create portal user from webdynpro abap
Creating user and assigning a group through code
user administration su01
How can i get the portal user id from logon ticket in the webdyn 4 ABAP
Cheers,
Kris.
Edited by: kissnas on May 21, 2011 8:47 AM

How to get Portal user from a standalone Java application

Hi,
I have a standalone Java application from where I need to fetch the Portal User Information like userid and email id.
I am using the below line of code
iUser = UMFactory.getUserFactory().getUserByLogonID("e017939");
I have included the jar file com.sap.security.api , But it was giving me the below exception
java.lang.NoClassDefFoundError: com/sap/tc/logging/Location
     at com.sap.security.api.UMFactory.<clinit>(UMFactory.java:55)
     at com.am.wcas.java.mailscheduler.kmaccess.FetchDataFromKM.getiUser(FetchDataFromKM.java:29)
     at com.am.ScheduleEmails.main(ScheduleEmails.java:89)
and I am getting a pop Up message from the Java Virtual Machine Launcher, saying a Fatal Exception has occured and the Program will exit.
Then I went throught he SDN threads and they asked me to include the
logging.jar and com.sap.security.perm.api .
I Included them, then also, it is giving me Exception
java.lang.NoClassDefFoundError: com/sap/engine/lib/logging/LoggingHelper
     at com.sap.security.api.UMFactory.<clinit>(UMFactory.java:56)
     at com.am.FetchKMData.main(FetchKMData.java:30)
Exception in thread "main"
and I am getting a pop Up message from the Java Virtual Machine Launcher, saying a Fatal Exception has occured and the Program will exit.
Kindly let me know if it is possible to access the User info using UMFactory in a standalone Java application. If yes kindly let me know where i am going wrong.
Regards,
Shilpa B.V

Hi Shilpa,
1. Check that you have added com.sap.security.api within the Your Project>Libraries folder (under navigation tab) and also added jars in the build path of the Your Project under project>properties>Build Path.
2. In case you have a DC instead of Web Dynpro Project then you have to add the com.sap.security.api under Your DC>Used DCs and have compile time and runtime dependency added.
Here java.lang.NoClassDefFoundError is caused basically due to only build time dependency added and reference to the jar missing at runtime. Rest the code to retrieve the current user id using UME API and getUserByLogOnID("....") method with/without portal environment would not be an issue at all.
Regards,
Tushar SInha

How to prevent a portal user from using the BEx Analyzer ?

Hi,
we have different type of users : most users may use the portal as well
as the analyzer ;
we have one special user with extended authorizations : this user
should use the portal , where he has a limited set of queries to run
with hardcoded filters ==> this user should not be able to use the
analyzer however, since he then would be able to call all other queries
by using the find function ;
how can we make sure this user cannot use the analyzer , using SAP
authorizations ?
best regards,
Erwin Van Giel.

Hi,
if I remove the complete S_RFC authorization for the user then the BEx Analyzer cannot connect anymore to the BW system, but neither can the user run reports from the portal : it needs the S_RFC with 'SYST'.
If I only remove the RRMX from the S_TCODE and from the S_RFC, it does not prevent the user from starting the BEx Analyzer and connecting to the BW system. It only stops the user if he would start the RRMX transaction from within an SAPGUI session.
Perhaps there should be a value in the S_RFC that allows connections from the portal but not from the BEx Analyzer .... ?
so not solved yet ....
best regards,
Erwin.

How to Restrict same portal user from other node

Hi
In my application, we charge customers for each portal user logins. But, i found that, they can share same user logins amongs number of people.
I don't want to allow the same portal user login into the application if that user is already logged in and it's session is still active.
Here is the Scenario :
User A is logged in to the portal from terminal AA. Now, User A agin tries to logg in to the portal from terminal BB. I don't wnat to allow user A to log in from terminal BB bcuz user A has active session from terminal AA.
Can anyone know how to implement this??
thanks in advance.
Srini

Hi Srini!
We have solved this problem with our own login portlet. Before the final login we've got to check (from the certain table) how many logins there are currently with that username.
But there is a problem. If the user closes the browser without logoff, the session remains active. There is a cleanup job, which removes those session in some hours. Still it is not very elegant.
Regards,
Jari

Programmatically adding/deleting users to/from portal groups

I am using the following PDK api, to delete an user from a portal group (otp_sales).
I get the following error which doestn make sense. I tested the following api from a
script shown below. In my application, this gets called from a trigger, and fails
because it sees a ROLLBACK getting used in the API.
<<<<<<<<<<<<< delete_from_group.sql >>>>>>>>>>>>>>>>>>>>>>
DECLARE
BEGIN
moc.wwsec_api.delete_user_from_list (p_group_id
=>MOC.wwsec_API.GROUP_ID('OTP_SALES')
,p_member_person_id =>73);
END;
<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SQL> @delete_from_group.sql
Input truncated to 1 characters
DECLARE
ERROR at line 1:
ORA-01086: savepoint 'DELETEUSERFROMLIST_SAVEPOINT' never established
ORA-06512: at "MOC.WWSEC_API", line 2467
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "MOC.WWCTX_SSO", line 849
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "MOC.WWCTX_SSO", line 669
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 3
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thanks
regards
-Ananth

We had the same problem and it turned out that deleting a portal user(delete_portal_user), removing a portal user from a list (delete_user_from_list) or updating a portal user, the "savepoint xxxx never established message" came up when there was no context set. If the procedure is called from within a portal page (or as user portal30) ,and the context is set and it works. The solution is to check to see if the context was set, and then set it if not.
if not portal30.wwctx_api_private.is_context_set then
portal30.wwctx_api_private.set_context(p_user_name => 'portal30');
end if;
Hope this helps
Tania

User mapping from portal to R/3

Hello everyone,
Our situation is this :
We made some visual composer iviews (charts and tables) that get data from R/3.
Instead of creating users in R/3, we want to use only one public user who can only call RFC's in R/3. So how is the user mapping implemented in this situation?
Please give me detailed explanation for it or links of documentation.
I will be appreciative and all answers will be rewarded with points.
Thanks for help.

In addition and from a maintenance perspective you could do a: Portal Group to R/3 UserMapping.
This will then automatically map all Portal Users in the Portal Group to the one R/3 user in the back-end. This saves effort when new users are created on the portal you don't have to map them all.
This method is also proposed by SAP for mapping to MDM for example.
NOTE: When you choose this you cannot trace the user in the back-end because
this back-end user is shared. If this is not a problem for your scenarion then I would say go for it.
Cheers,
Benjamin Houttuin

Exporting and Importing Portal users from Source system to Target system

Hi All,
I have exported all portal users from source portal in to file Users.txt do i need to convert this file in to some other format so that i can import these users in Target portal.
any links documents
Regards,
Murali

Hi,
If you look in to User.txt
I have role also i have deleted role in User.txt uploded file with rest of the otherdata including group it it able to create users.
so in Nut shell let's say
1. UID-Murali
Role- Manager
Group- HRGroup
user existing in DEV and i want to trnasfer data to PRD
Role:Manger should exist in PRD, and group is not mandatory optional
but the link http://help.sap.com/saphelp_nw70/helpdata/EN/ae/7cdf3dffadd95ee10000000a114084/frameset.htm
says while uploading users role is optional it throws waring but i got error.
i am bit confused.
Now let's sau there are 10 users, 10 roles and 2 groups in source system if i want to export all users,roles,groups to target system what sequnce i have to follow without getting any error , warining is there any restriction on number of users, roles, groups i know file size should be less than 1MB.
Points are on the way.
Regards,
Murali

Custom user attribute from ABAP to Portal UME

Hi All,
We have choose the ABAP as the data source for portal UME. We have a custom user attribute in the abap. Now i want to bring that custom user attribute from abap to custom user attribute in the UME.
Any help will be rewarded.
Thanks
Sarang.

Any resolution to this issue?

Sync User Locks from LDAP(Microsoft AD) to Portal UME

Hi All,
Currently we have our Portal UME connected to LDAP (Microsoft AD) as our data source. I can bring up all Active Directory users in Portal, however the users that are locked and disabled in Active directory are still active in portal. To be more clear the expiration date of a userid in AD does not sync with Portal UME account expiration date. Is there a way to bring in the expiration value in to portal?
Regards,
Junaid

Config tool may not have expiry date as mapping in Additional LDAP prop tab, you may need to look for configuration file where you can map the logical attribute to the LDAP.
Licensing impact depends on your contract with SAP.
However you can check portal users with USMM at the end of URL.
E.g.
remove 'irj/portal' from your initial portal link and add 'usmm'

Retriving user details from user rofile in portal database

HI all,
any one knows how to retrive user details from user rpofile in portal database. I am using webdynpro appliction.Please reply.
Thank you
Maruthi

Hi maruti Rao ,
All Gives U gud Idea..here i give u some brief procedure.First of all u need to add 2 jar file in ur project structure for proper working of "com.sap.security.api.IUser" Interface. After that for retriving Users data Stored on LDAP Server.
If you are using an LDAP directory as a data source for your user-related data, the logical attribute names used by the Java application programming interface (API) of SAP User Management Engine (UME) must be mapped to the physical attribute names used in the schema of your corporate LDAP directory.
Example Data-Source File is as Below From Where U can Get All The Information of Logged user...
<dataSources>
<dataSource id="CORP_LDAP"
    className="com.sap.security.core.persistence.datasource.imp.LDAPPersistence"
    isReadonly="false"
    isPrimary="true">
<responsibleFor>
    <principal type="account">
    </principal>
    <principal type="user">
      <nameSpaces>
        <nameSpace name="com.sap.security.core.usermanagement">
          <attributes>
            <attribute name="firstname" populateInitially="true"/>
            <attribute name="displayname" populateInitially="true"/>
            <attribute name="lastname" populateInitially="true"/>
            <attribute name="fax"/>
            <attribute name="email"/>
            <attribute name="title"/>
            <attribute name="department"/>
            <attribute name="description"/>
            <attribute name="mobile"/>
            <attribute name="telephone"/>
            <attribute name="streetaddress"/>
            <attribute name="uniquename" populateInitially="true"/>
          </attributes>
        </nameSpace>
      </nameSpaces>
    </principal>
      <principal type="group">
      </principal>
</responsibleFor>
<attributeMapping>
    <principals>
      <principal type="account">
      </principal>
      <principal type="user">
        <nameSpaces>
          <nameSpace name="com.sap.security.core.usermanagement">
            <attributes>
              <attribute name="firstname">
                <physicalAttribute name="givenname"/>
              </attribute>
              <attribute name="displayname">
                <physicalAttribute name="displayname"/>
              </attribute>
              <attribute name="lastname">
                <physicalAttribute name="sn"/>
              </attribute>
              <attribute name="fax">
                <physicalAttribute name="facsimiletelephonenumber"/>
              </attribute>
              <attribute name="uniquename">
                <physicalAttribute name="uid"/>
              </attribute>
              <attribute name="loginid">
                <physicalAttribute name="null"/>
              </attribute>
              <attribute name="email">
                <physicalAttribute name="mail"/>
              </attribute>
              <attribute name="mobile">
                <physicalAttribute name="mobile"/>
              </attribute>
              <attribute name="telephone">
                <physicalAttribute name="telephonenumber"/>
              </attribute>
              <attribute name="department">
                <physicalAttribute name="ou"/>
              </attribute>
              <attribute name="description">
                <physicalAttribute name="description"/>
              </attribute>
              <attribute name="streetadress">
                <physicalAttribute name="postaladdress"/>
              </attribute>
              <attribute name="pobox">
                <physicalAttribute name="postofficebox"/>
              </attribute>
              <attribute name="preferredlanguage">
                <physicalAttribute name="preferredlanguage"/>
              </attribute>
            </attributes>
          </nameSpace>
        </nameSpaces>
      </principal>
      <principal type="group">
      </principal>
    </principals>
</attributeMapping>
</dataSources>
regard's
Dheerendra Shukla

Portal users monitoring from EP5

Similar Messages

Maybe you are looking for